So I flash another ROM to my tab last night (AOKP) and it was running great but I wanted to go back to Clean Rom. I flashed the new rom and wiped everything and anything as I always do with roms. After flashing Clean rom then wiping, I rebooted to a bootloop. I left it overnight and checked on it, and it was still in a bootloop.
I hooked up and started running Odin today to flash stock and Odin was stuck on recovery.img for 3 hours while I was at work. I came home and hit the power button on my tablet and within a few seconds it loads a screen "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again" Kies does not work on my PC so I cannot use it. Hitting power+volume up doesn't get me into recovery. I know it can be fixed but, how? I have looked all over for this same issue and cannot find much that will help. Any ideas?
*nevermind* finally found something that worked.
You should post the solution you found. It may help others.
Sent from my amazing 10.1 galaxy tab
hi, i have just recently got another galaxy s2 after nicely cracking the screen on my old one :S the stats are as follows
galaxy s2
4.0.3
i9100xxlps
3.0.1519100xwlp7sl340913
i downloaded and flashed the closest kernal which was xxlp6 and now it seems stuck in the start up screen, odin flashes it successfully and it starts to reboot but all i have on screen is samsung galaxys11 with yellow triangle and it just hangs there and won't go any further, i've left if for almost an hour now, i followed the instructions to the letter so i don't know whats gone wrong, i have found and downloaded the speedmod kernal and tried to flash that over using odin, again it says successfull but will not go past the loading screen, please help i don't know what to do or what i could have possibly done wrong
thanks in advance, emma
If you can enter Recovery Mode, wipe data from it.
Try removing battery for 5-10 mins and put it back in and try.
Again try recovery mode also..
Cheers
emma129 said:
hi, i have just recently got another galaxy s2 after nicely cracking the screen on my old one :S the stats are as follows
galaxy s2
4.0.3
i9100xxlps
3.0.1519100xwlp7sl340913
i downloaded and flashed the closest kernal which was xxlp6 and now it seems stuck in the start up screen, odin flashes it successfully and it starts to reboot but all i have on screen is samsung galaxys11 with yellow triangle and it just hangs there and won't go any further, i've left if for almost an hour now, i followed the instructions to the letter so i don't know whats gone wrong, i have found and downloaded the speedmod kernal and tried to flash that over using odin, again it says successfull but will not go past the loading screen, please help i don't know what to do or what i could have possibly done wrong
thanks in advance, emma
Click to expand...
Click to collapse
What you should do is try get into recovery (vol up+home+power) and wipe cache and data reset then reboot. If that doesn't work or you can't get into recovery then go into download mode, flash stock firmware and then use a kernel like siyah or fluxi that work on i9100 and give you root wit cwm recovery.
Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Blaiz0r said:
Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Click to expand...
Click to collapse
Does your player have a mechanical home button because if it has a home button that is a light capacative and also if its capacitive you need entropeys kernel search on google
I used to run Cyanogenmod on my S3 (I9300), but yesterday the phone suddenly powered off and refused to go past the Galaxy SIII splash-screen after powering it on, so I decided to wipe the device via recovery but that didn't help at all. After many failed wipes, formats and flashing of different ROMs, I decided to go back to stock Sammy. I downloaded stock 4.3 from Samfirmware and successfully installed it using Odin.
The phone powered on after wiping the data using the stock recovery, but using it is an absolute hell!
The phone keeps powering off by itself and it's not responsive or fast at all. It takes the phone half a minute to power on the display after pressing the power or home button, when scrolling through a list, it freezes for about a minute and did I mention the sudden power offs?
Help me out, please.
Try to flash again with odin, but this time use a full rom(pda+modem+csc) and pit file:
GT-I9300XXUGMJ9_KOR_FACTORY
https://my.pcloud.com/publink/show?code=euF
pit file:
https://mega.co.nz/#!5BdHjYSI!Jr_VlQl1Op8zUVd_Zji3WTyqnukDwu2PcakW7gCEWj4
dabyd64 said:
Try to flash again with odin, but this time use a full rom(pda+modem+csc) and pit file:
GT-I9300XXUGMJ9_KOR_FACTORY
https://my.pcloud.com/publink/show?code=euF
pit file:
https://mega.co.nz/#!5BdHjYSI!Jr_VlQl1Op8zUVd_Zji3WTyqnukDwu2PcakW7gCEWj4
Click to expand...
Click to collapse
I've been looking for a full rom for days.
I will try it right away and give a feedback as soon as possible. Thanks!
EDIT: Fixed! Thanks!
UPDATE: I got stock firmware flashed on it, but as soon as it finished, it just stuck in the Samsung Galaxy S6 Edge boot screen, and it won't even allow me to access recovery mode so I can wipe cache and whatnot. I'm running out of patience with this brick of a phone. It just goes straight to the same boot screen, not allowing me to get to the recovery mode. Are there any alternative ways to enter recovery mode, or alternative ways to wipe cache and partition? Please, any advice is welcomed.
Thanks in advance.
Try different odin version and cable before you messing with pit.
Sent from my SM-N920C
I had tried using three different versions of Odin, 3.07, 3.09, 3.106. I also used multiple cords and multiple versions of stock roms. And still, no success. It won't even stay off, every time it juices up, or is plugged in, it goes straight to the Samsung Galaxy S6 Edge boot screen and stays there.
Mind you, I am not too familiar with anything outside of stock roms, some custom roms and rooting. Have not tested out much more than that. Any noob-friendly advice would be welcomed.
I had nand write start error once during downgrading my s6 from 6.0.1 to 5.1.1. I just tried odin 3.10 and it got flashed successfully. I was lucky then.
Sent from my SM-N920C
Well, I finally got one of the firmwares to work, it ran through Odin and everything just fine, but after it was done, it basically did the same thing, it stayed on the Samsung black screen, except without the red writing at the top..
Sent from my SM-N910W8 using XDA-Developers mobile app
Enter recovery and factory reset
Sent from my SM-N920C
I can't access recovery, the phone won't turn off, so as soon as it has any source of battery life, it just goes straight to the samsung boot screen and stays there.
Hold vol down+power button for 15-20sec. As soon as it reboot, hold vol up+power+home button to enter recovery.
Sent from my SM-N920C
I've tried that at least 50-ish times now, It just does not work, I tried it with a second or two delay, I tried it immediately after screen turns off, tried it so many times. No matter how long I hold them down for, it just stays at the boot screen. I can get to download mode just fine, but for some reason recovery seems to not be working.
is it a bootloop (it keeps restarting or it is frozen on samsung logo) ?
if bootloop you can try: plug in power corde. press and hold both volume buttons + home + power untill it shuts down. unplug power corde. press and hold home volume down and power for download mode. get another rom and flash it.
Hi i am having exactly the same problem can boot to download but not recovery, let the phone run out of battery and as soon as you plug it in again bootloop, i was running crisscross marshmallow rom ,custom kernel i have a backup but am not sure what or how to flash correctly in Odin any help would be much appreciated thanks .
Edit flashed firmware from sammobiles worked a treat .
Any updates on this?
I have this exact problem however I never attempted rooting my phone or changing anything on the firmware, I was on YouTube when my s6 edge crashed then entered boot loop, I CANNOT ACCESS recovery mode ,but I can access Odin mode. WTF everything is stock on my phone, never even heard of 'bootloop, Odin mode' before this happened .or even had to access my recovery mode on my s6. As I search the web for help I find solutions that require recovery mode, but I can access it. Apparently bootloop happens when people try to root but I never tired that. I don't even know what that is!
This just happened to my S6. Was watching YouTube then it crashed and entered a boot loop, can't access recovery, only download mode.
MarkWCAU said:
This just happened to my S6. Was watching YouTube then it crashed and entered a boot loop, can't access recovery, only download mode.
Click to expand...
Click to collapse
Flash stock firmware