Stock ROM JB 982.124.14.XT90.Vodafone.en.EU BMM 0.3.4THIS IS JB 4.1.2 FOR XT910 Flashable ZipTO INSTALL THIS ROM YOU NEED FLASH NEW Vodafone JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT IF YOUR PHONE NOT EUROPE EMEA REGIONKERNEL
Stock ROM
Deodexed ROM
Battery Mod
do you know if there is some new baseband, polish language, and if i can install it on any slot in bmm 0.3.4 or only on system_1 ?
xtam said:
do you know if there is some new baseband, polish language, and if i can install it on any slot in bmm 0.3.4 or only on system_1 ?
Click to expand...
Click to collapse
About baseband it's U_04.10.00R. Polski have, can install on any slot via BMM.
This is the same that HSD-Pilot post?
Have portuguese from Brazil?
Dzięki/thanks
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
PatrickDziura said:
This is the same that HSD-Pilot post?
Have portuguese from Brazil?
Click to expand...
Click to collapse
Its for Boot menu manager 0.3.4, hsd is for rsd
after flashing this kernel/rom is it possible to back to ics, or switch to vzv kernel?
artur0588 said:
Stock ROM JB 982.124.14.XT90.Vodafone.en.EU BMM 0.3.4THIS IS JB 4.1.2 FOR XT910 Flashable ZipTO INSTALL THIS ROM YOU NEED FLASH NEW Vodafone JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT IF YOUR PHONE NOT EUROPE EMEA REGIONKERNEL
ROM
Click to expand...
Click to collapse
sweet!!!
thanks man
strielcius said:
after flashing this kernel/rom is it possible to back to ics, or switch to vzv kernel?
Click to expand...
Click to collapse
just backup your boot via bbm and u will be able to go back to stock... bbm doesnt do anything permament...
my one is
system - 672.180.41.xt910.retail.en.EU
Firmware - GAS_EMEA_USASPDRICSRTGB_P021
ICS 4.0.4
need to erase cid ?
bb race said:
my one is
system - 672.180.41.xt910.retail.en.EU
Firmware - GAS_EMEA_USASPDRICSRTGB_P021
ICS 4.0.4
need to erase cid ?
Click to expand...
Click to collapse
no
any mirror? please?
I have flashed deodexed version and I must say I'm impressed. Fast, stable and battery friendly. Everything works, no bugs at all
Also I've noticed that there is no root in the rom.
This problem was solved by installing root directly from BMM recovery, section system keeper/install root/reboot
Finally I have also system 2 with a reliable rom
Thanks a lot!
edit: can I use your 1% battery mod for leaked verizon JB on this rom?
heblu said:
I have flashed deodexed version and I must say I'm impressed. Fast, stable and battery friendly. Everything works, no bugs at all
Also I've noticed that there is no root in the rom.
This problem was solved by installing root directly from BMM recovery, section system keeper/install root/reboot
Finally I have also system 2 with a reliable rom
Thanks a lot!
edit: can I use your 1% battery mod for leaked verizon JB on this rom?
Click to expand...
Click to collapse
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
hansip87 said:
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Definitely this one! Seems a bit lighter, faster and a lot better 3G connection.
Regarding CID I think it should still be erased coz your not in EU. It shouldn't bother you as before
I didn't noticed panorama mode
Bottom line: it needs to be tested a few more days for stability, but so far I strongly recommend it
And, yes, don't forget to flash the right kernel
Enjoy
edit: I use kernel AND baseband from HSD-Pilot thread about OTA update
hansip87 said:
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hi i just flash it, and work like a charm.. fast and light.. also im from Asia retail Razr and no need to erase CID.
*wow my first post on XDA sorry for my bad english
heblu said:
Definitely this one! Seems a bit lighter, faster and a lot better 3G connection.
Regarding CID I think it should still be erased coz your not in EU. It shouldn't bother you as before
I didn't noticed panorama mode
Bottom line: it needs to be tested a few more days for stability, but so far I strongly recommend it
And, yes, don't forget to flash the right kernel
Enjoy
edit: I use kernel AND baseband from HSD-Pilot thread about OTA update
Click to expand...
Click to collapse
Seems tempting to try but one request, could you upload a screenshot or 2 for me? The thing i like about the verizon one is the clean statusbar (no carrier) and the razr i like text messaging theme (the green icon one). I know it might be minor but still he3..
And about the new panorama mode, it is the bomb man, really great at producing panorama shot, you could scan the area anywhere you like, almost no restriction, i could call it photo sphere alpha version so if this vodafone version has it all, i might flash it tonight
dettaskarma said:
Hi i just flash it, and work like a charm.. fast and light.. also im from Asia retail Razr and no need to erase CID.
*wow my first post on XDA sorry for my bad english
Click to expand...
Click to collapse
Welcome mate. could you tell me how you flash it? With bmm or rsd? To slot 1 or other? So no more erased cid?
Sent from my XT910 using xda app-developers app
hansip87 said:
Welcome mate. could you tell me how you flash it? With bmm or rsd? To slot 1 or other? So no more erased cid?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Yup i use BMM and i put it on Slot2 because i still keep my ICS in Slot-1 (stock) and yes no more CID erasing.. confirm, just flashing kernel between ICS and JB vodafone Rom depend on which one i use.
maybe after few days testing this rom i will move it to Slot1 as main rom replacing ICS.
before this rom i use Verizon JB but i dont like the signal bar counting seems not accurate, and finally after using the Vodafone JB all signal bar is accurate as i was using my ICS rom.
im a happy person now :victory:
hello I am from Mexico its Latin America. My phone is a xt910 GSM i used to have JB from Verizon but the wifi hotspot didn't work and I go back to ice and restored CID. For this room I need to erase CID? Or I can just flash and does the wifi hotspot works?
Sent from my XT910 using xda app-developers app
dettaskarma said:
Yup i use BMM and i put it on Slot2 because i still keep my ICS in Slot-1 (stock) and yes no more CID erasing.. confirm, just flashing kernel between ICS and JB vodafone Rom depend on which one i use.
maybe after few days testing this rom i will move it to Slot1 as main rom replacing ICS.
before this rom i use Verizon JB but i dont like the signal bar counting seems not accurate, and finally after using the Vodafone JB all signal bar is accurate as i was using my ICS rom.
im a happy person now :victory:
Click to expand...
Click to collapse
Hello, I am using retail asia razr
I am not clear about your description.
Do you mean you flash the Vodafone JB Kernel in system 2 first, then flash the zip file in system 2????
And do I need to do anything to flash rom in system 2???
Does webtop work fine with this?
Sent from my Nexus 7 using xda app-developers app
Related
No longer available
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
I am already in china jb rom xt910. Can i flash this on second system?
Sent from my XT910 using Tapatalk 2
knives809 said:
I am already in china jb rom xt910. Can i flash this on second system?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You need run with Verizon JB Kernel only.
thanks,can you please also post some screenshot.
will try this ROM soon.
Please provide screenshots, and a fairly detailed change log + bug list
rampee said:
Please provide screenshots, and a fairly detailed change log + bug list
Click to expand...
Click to collapse
I have add screenshots, sometimes they not shown, don't know why. For the bugs, there no bugs, should everything works.
artur0588 i have your ics rom on system 1 and is great, gonna flash this in a few minutes on system 2, i bet it's also be great
thanks for your work
@artur0588
In first post you wrote:
YOU MUST RUN JB KERNEL FROM LEAKED VERIZON ANDROID
and also:
You must run android ICS 4.0.4
so there are 2 information which results in following understanding:
1.You must install jb verizon kernel and
2.You must have ICS baseband?
is this equal to what you are saying?
xtam said:
@artur0588
In first post you wrote:
YOU MUST RUN JB KERNEL FROM LEAKED VERIZON ANDROID
and also:
You must run android ICS 4.0.4
so there are 2 information which results in following understanding:
1.You must install jb verizon kernel and
2.You must have ICS baseband?
is this equal to what you are saying?
Click to expand...
Click to collapse
he was referring to whom is on ics to erase cid, install jb kernel and then flash, if you are already in jb kernel you don't need those steps.. why you are that mean coz you know what he was talking about
Sisqo said:
he was referring to whom is on ics to erase cid, install jb kernel and then flash, if you are already in jb kernel you don't need those steps.. why you are that mean coz you know what he was talking about
Click to expand...
Click to collapse
I am not mean... i never intended to be...
Rom is always based on kernel and baseband... he menttioned being on stock ics = having ics baseband and havink ics kerenl.
Now he included in his instruction step to flash jb kernel so the state of the rom would be, after flashing jb verizon kernel - ICS baseband - because we did not changed baseband , ans verizon kernel - cause we had changed it.
SO i asked if this is equal to what he is saying - ics baseband and verizon kernel is required to this rom?
NEVER intended to be mean - just wanted to simplify that information...to understand better
just flashed it, jb verizon kernel with chinese baseband bp_U04.10.03P.img that i used also in other jb roms.
didn't had any apns in settings, added the one for my network and data works, will report any problems.. restoring my apps for now
AW: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
C'mon guys, it the same as for any other JB Rom out there. This Rom is based on the Verizon Leak, so you have to flash the JB Kernel.
For BMM you need ICS, so >
Run ICS as Main System > install BMM0.3.4 > flash Verizon JB Kernel > flash Rom > Profit
Sent from my XT910
Have portuguese from Brazil?
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
At last a leak-based rom with no verizon crap i see some remaining files in framework folder though. Any rom changelog please? Thanks.
Enviat des del meu Motorola RazR Maxx
artur0588 said:
You need run with Verizon JB Kernel only.
Click to expand...
Click to collapse
can u post a link to the verizon jb leak for gsm xt910
---------- Post added at 09:04 PM ---------- Previous post was at 09:02 PM ----------
HSD-Pilot said:
C'mon guys, it the same as for any other JB Rom out there. This Rom is based on the Verizon Leak, so you have to flash the JB Kernel.
For BMM you need ICS, so >
Run ICS as Main System > install BMM0.3.4 > flash Verizon JB Kernel > flash Rom > Profit
Sent from my XT910
Click to expand...
Click to collapse
can u post a link to the verizon jb and do i hve to erase my cid if i am using ics as my main system? or
Irthu said:
can u post a link to the verizon jb leak for gsm xt910
---------- Post added at 09:04 PM ---------- Previous post was at 09:02 PM ----------
can u post a link to the verizon jb and do i hve to erase my cid if i am using ics as my main system? or
Click to expand...
Click to collapse
You can follow this tutorial in order to be able to install ROMs based in the JB leak. As you will see, you must erase your cid to use any of these ROMs (including wdsea0588).
In the tutorial, "jb ota" means any ROM based in JB kernel. And you don't need to flash GSM patch as wdsea0588 is already patched and ready for GSM use.
which languages are included?
Re: [ROM][GSM][XT910][BMM 0.3.4] WDSEA0588 v1.75en JB 4.1.2
Spanish, English, and a third called "pyccknn"
Enviat des del meu Motorola RazR Maxx
woonaval said:
Spanish, English, and a third called "pyccknn"
Enviat des del meu Motorola RazR Maxx
Click to expand...
Click to collapse
In fact 3rd one it's russian.
sweet Tonight I'll give it a try and see if I'll move from china JB to verizon kernel. I hope so
as seen from screenshots signal indicator is full (verizon kernel roms = 2-3 bar max, china kernel = full and I still don't know why)
anyway, congrats and thank you!
Stock ROM JB 4.1.2 9.8.2O-124_SPUEM-14 .en.AU BMM 0.3.4(982.124.14.XT910.Retail.en.AU)
THIS IS JB 4.1.2 FOR XT910 Flashable ZipTO INSTALL THIS ROM YOU NEED FLASH NEW EMEA JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT IF YOUR PHONE NOT EMEA REGIONKERNEL
Stock ROM ROM ROTED, Just Install Super User from Play Google
Does it have polish language? which one is newer, this one or .14 from vodafone ?
xtam said:
Does it have polish language? which one is newer, this one or .14 from vodafone ?
Click to expand...
Click to collapse
Yes, have Polski. Both Vodafone and Au system v. 982.124.14
artur0588 said:
Yes, have Polski. Both Vodafone and Au system v. 982.124.14
Click to expand...
Click to collapse
thanks, so is there any benefit in installing this one over vodafone?
xtam said:
thanks, so is there any benefit in installing this one over vodafone?
Click to expand...
Click to collapse
I think they are same except of languages.
It uses same EU Kernel than Retail.EU and Vodafone releases?
Thanks!
artur if we flash this rom to our device without Customer ID deletion, is it possible to downgrade to ICS
AW: [ROM]Stock ROM JB 4.1.2 9.8.2O-124_SPUEM-14 .en.AU(982.124.14.XT910.Retail.en.AU)
zupervisor said:
artur if we flash this rom to our device without Customer ID deletion, is it possible to downgrade to ICS
Click to expand...
Click to collapse
Should be as nothing you do with bmm is lasting forever
Sent from my XT910 using xda app-developers app
Nandeh said:
It uses same EU Kernel than Retail.EU and Vodafone releases?
Thanks!
Click to expand...
Click to collapse
Yes, same Kernel!
zupervisor said:
artur if we flash this rom to our device without Customer ID deletion, is it possible to downgrade to ICS
Click to expand...
Click to collapse
Yes, if your phone EMEA Region you can flash kernel and ROM without eased cid then downgrade to ICS by flashing ICS ROM and Kernel. Also if your phone not EMEA region you can flash this ROM with erased cid and then downgrade to ICS in same way.
Is it compatible with asiaretail cid? Just wanna make sure, 99% should be but i dont want to take a flase step any review will be appreciated.
Ps: with all these releases, i think there will be an asiaRetail package coming our way. But finger crossed though..
Sent from my XT910 using xda app-developers app
hansip87 said:
Is it compatible with asiaretail cid? Just wanna make sure, 99% should be but i dont want to take a flase step any review will be appreciated.
Ps: with all these releases, i think there will be an asiaRetail package coming our way. But finger crossed though..
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Yes, compatible. Not cid compatible, Kernel compatible. It means you can flash Kernel withour erased cid.
artur0588 said:
Yes, compatible. Not cid compatible, Kernel compatible. It means you can flash Kernel withour erased cid.
Click to expand...
Click to collapse
Nice Btw mate, is it possible to use Verizon JB kernel combined with this ROM? I'm asking because i feel that the Verizon ROM package is a little bit smoother, i don't know what cause, but it is more fluid. Minus the CID incompatibility ofc. Or vice versa (this kernel and Verizon ROM? But i think that way it will create more problem with the baseband configuration)?
hansip87 said:
Nice Btw mate, is it possible to use Verizon JB kernel combined with this ROM? I'm asking because i feel that the Verizon ROM package is a little bit smoother, i don't know what cause, but it is more fluid. Minus the CID incompatibility ofc. Or vice versa (this kernel and Verizon ROM? But i think that way it will create more problem with the baseband configuration)?
Click to expand...
Click to collapse
I don't think it works on Vz Kernel...
hansip87 said:
Nice Btw mate, is it possible to use Verizon JB kernel combined with this ROM? I'm asking because i feel that the Verizon ROM package is a little bit smoother, i don't know what cause, but it is more fluid. Minus the CID incompatibility ofc. Or vice versa (this kernel and Verizon ROM? But i think that way it will create more problem with the baseband configuration)?
Click to expand...
Click to collapse
I am not able to check. After i officially update my phone with Vodafone OTA i can not flash any other Kernel except EMEA JB Kernel.
i want to report an issue Bluetooth doesn't get active. Anyone confirm this issue?
Have portuguese from Brazil?
PatrickDziura said:
Have portuguese from Brazil?
Click to expand...
Click to collapse
Yes it has.
zupervisor said:
Yes it has.
Click to expand...
Click to collapse
I am going to fix it
zupervisor said:
i want to report an issue Bluetooth doesn't get active. Anyone confirm this issue?
Click to expand...
Click to collapse
Yep no Bluetooth.. Anyway i'm going back to Verizon ROM now.. Seems like the 124.14 is laggier, feels like still not official release.
No longer available
this is on 98.124.14?
is this new version to http://forum.xda-developers.com/showthread.php?t=2193275 ? or completely different?
xtam said:
this is on 98.124.14?
is this new version to http://forum.xda-developers.com/showthread.php?t=2193275 ? or completely different?
Click to expand...
Click to collapse
Look in screenshots and read features. This is completely different, also this one based on Au JB.
BMM 2nd System?
Hi Artur,
Can we flash this zip on the 2nd System using BMM? Currently running ICS 4.0.4 stock.
Thanks for the JB EMEA!
markshane said:
Hi Artur,
Can we flash this zip on the 2nd System using BMM? Currently running ICS 4.0.4 stock.
Thanks for the JB EMEA!
Click to expand...
Click to collapse
Yes, any Slot ok. After install this ROM you not able boot ICS ROM because kernel will change to JB automitcally, you need flash ICS kernel via BMM to run your 4.0.4 ROM again.
I was curious how you did it that boot.img will be flashed automatically, now i see:
package_extract_file("boot.img", "/dev/block/mmcblk1p14");
good work.
:good: What could i say, you really a great work, always thank you.
my xt910 was on stock EU JB( http://forum.xda-developers.com/showthread.php?t=2192532 ), installed BMM, did all wipes, installed rom.
I have red led and black screen... and nothing happens... surely i did backup, and reverted back to stock... any suggestions how to make this rom working?
p.s. i tried to erase cid, no juice.
amletinka said:
my xt910 was on stock EU JB( http://forum.xda-developers.com/showthread.php?t=2192532 ), installed BMM, did all wipes, installed rom.
I have red led and black screen... and nothing happens... surely i did backup, and reverted back to stock... any suggestions how to make this rom working?
p.s. i tried to erase cid, no juice.
Click to expand...
Click to collapse
This happened randomly with BMM. You need reboot and try boot again.
hmm...really installed again, works... thanks
Thank you very much! This will be my daily driver until CM or AOKP roms became stable enough
looks promising I'll definitely try it
thank you
This Rom looks nice inverted. The AOSP Deskclock Widget (the digital one) doesn't show up and gives a Error Message.
Thank You! It's my daily Driver now...
man, the THANKS button isnt large enough!
ill try it,
can i install it as stock rom via bmm and then remove bmm?
im asking because all the KEXEC thing, i have now the rom which you based on, there will be problems?
A very nice rom with little and big tweaks and set of useful additions. It will be hard for me to decide between this one and china.jb.retail if you continue to deliver roms rich and stable like this. Thank you Artur.
pretty stable & fast.
tks man, i install to stock slot.
no bug so far.
why this rom so good but less people try?
---------- Post added at 06:01 AM ---------- Previous post was at 06:00 AM ----------
heblu said:
looks promising I'll definitely try it
thank you
Click to expand...
Click to collapse
this is a very great rom. i have used as stock rom.
Awesome rom, have only used stock jelly bean leak before. However I got a weird problem. WHen I got all my settings right, I did a Nandroid Backup. Then i fiddled around with rom toolbox and wanted to revert to my "rom". I restored my backup and now I Only get into AP fastboot mode everytime i boot.
It says:
Ivalid CC OTC/CC:webtop):Invalid sp data
So now i'm downloading fastboot files for jelly bean: http://forum.xda-developers.com/showthread.php?t=2017200
I tried using my old ICS fastboot file but it didn't work, proably cuz I have a JB kernel. Then hopefully I can reflash this rom.
Edit:
Can't even use fastbbot, just keep saying the flasing process fails, got to reflash ics fastboot files, have no idea what will happen now. my CID is still erased.
AW: [ROM][GSM][XT910][BMM 0.3.4]DSEA0588 v1.22en JB 4.1.2 (30.03.2013)
You bricked your Phone, not the Rom.
When you try to flash an RazR M Firmware on an XT910 you shouldn't mess around with any kind of Rom :thumbdown:
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
You bricked your Phone, not the Rom.
When you try to flash an RazR M Firmware on an XT910 you shouldn't mess around with any kind of Rom :thumbdown:
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Have done it a million times, and each time it has ****ed it up, a Nandroid backup always work. Backups are kinda useless if the tend to brick the phone when you restore them.
I managed to use ICS flashboot files to flash the phone, but I ended up with the same problem.
AW: [ROM][GSM][XT910][BMM 0.3.4]DSEA0588 v1.22en JB 4.1.2 (30.03.2013)
http://forum.xda-developers.com/showthread.php?p=38189529
Gesendet von meinem XT890 mit Tapatalk 2
Now i had Vodafone Eu 4.1.2 on my stock and i accidentally installed Avatar ROM on it (I wanted to keep my stock slot on Moto JB and use system 2 for experimenting with other ROMs like Avatar) . Now both my slots: slot 1 and slot 2 have Avatar ROM on it. Is there any way to go back to Moto JB without going thru the RSD way..??
I have BMM
If you made a backup prior to flashing avatar you can; otherwise you're pretty much stuck without "your"stock..but worry not my friend you can flash this rom instead,it is stock,much better than original I'd say; it is deodexed and looks very cool.
http://forum.xda-developers.com/showthread.php?t=2371207
Sent from my XT910 using xda premium
AztekSoul said:
If you made a backup prior to flashing avatar you can; otherwise you're pretty much stuck without "your"stock..but worry not my friend you can flash this rom instead,it is stock,much better than original I'd say; it is deodexed and looks very cool.
http://forum.xda-developers.com/showthread.php?t=2371207
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
:good:
Have been using this for sometime now and it is very good. Best thing as stated above is that its deodexed and comes with root.
I believe this is a XT910 from Korea, didn't find much info. on the phone. Does it matter? Can I take Root and upload a U.S. ROM?
I've found some relevant info. here.
http://forum.xda-developers.com/showthread.php?t=2644681
Regards,
Mike
Did you find fastboot files for it?
Sent from my XT912 using Tapatalk
You might brick it ...Not sure though!
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
seandop said:
Did you find fastboot files for it?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I'm not sure how to determine which file "fastboot" or rom are compatible. On my previous phone, it was possible to flash diferent country ROMS Seems this may not be the case here?
qkdxorjs1002 said:
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
Click to expand...
Click to collapse
Interesting. Does this mean every time you power on, you have to do the power vol. up vol. down? I thought you needed to keep the CID.
Also, my understanding is that you can flash non-official ROMs and keep the CID. Is that the case or are you using non official ROMs?
I found a site online suggesting to flash the international ROM on the Razr, then you can go from there, but the links to the apps to do the upgrade don't work for me. Any thoughts on this path?
Regards,
Mike
qkdxorjs1002 said:
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
Click to expand...
Click to collapse
Any idea where I can find the official XT910s ROM updates? I can't do OTA in U.S.
Regards,
Mike
Firmwares are all listed here http://sbf.droid-developers.org/
I have a XT910K (Korea Telecom) and I bricked it with wrong firmware...only way I could revive it was by deleting the CID and flashing taiwanese stock JB 4.1.2.via RSD Lite..After that, I rooted it, installed Safestrap and now I have stock JB + Resurrection KK + Liquid Smooth KK + CM 11 KK, booting and working perfectly. So, beware of what you flash as/on stock, and once you have custom recovery as Safestrap or BMM, you can flash whatever you want.
Lincoln357 said:
Firmwares are all listed here http://sbf.droid-developers.org/
I have a XT910K (Korea Telecom) and I bricked it with wrong firmware...only way I could revive it was by deleting the CID and flashing taiwanese stock JB 4.1.2.via RSD Lite..After that, I rooted it, installed Safestrap and now I have stock JB + Resurrection KK + Liquid Smooth KK + CM 11 KK, booting and working perfectly. So, beware of what you flash as/on stock, and once you have custom recovery as Safestrap or BMM, you can flash whatever you want.
Click to expand...
Click to collapse
Thanks for sharing your experience.
I'm assuming you're recommending to go with Safestrap and install a 2nd OS. Couple of questions.
1: Were you able to uninstall any of the Korean specific apps? Wanted to know if there is a list of safely removeable apps.
2: Which OS do you prefer? I'm looking for performance and battery.
Thanks.
Mike
panamamike said:
Thanks for sharing your experience.
I'm assuming you're recommending to go with Safestrap and install a 2nd OS. Couple of questions.
1: Were you able to uninstall any of the Korean specific apps? Wanted to know if there is a list of safely removeable apps.
2: Which OS do you prefer? I'm looking for performance and battery.
Thanks.
Mike
Click to expand...
Click to collapse
Yes, I can recommend Safestrap since I haven't had a single problem with it so far.
1. You can uninstall any app as soon as you root your device (use Titanium Backup Pro, for example)
2.I keep one JB 4.2.2 rom and a few 4.4.2 roms on my device...since KK roms are "polished" enough now, there is no difference in performance or battery life. I would suggest KK, since it's the newest version with all features included. Roms I can recommend are Resurrection Remix, Liquid Smooth, SlimKat, Mokee OSP, Pacman etc, not necessarily in that order. My daily driver atm is Resurrection, fast, smooth and stable.
Hi,
Is there updates about your mobile,
I was looking for stable room for my xt910s after removing cid.