I believe this is a XT910 from Korea, didn't find much info. on the phone. Does it matter? Can I take Root and upload a U.S. ROM?
I've found some relevant info. here.
http://forum.xda-developers.com/showthread.php?t=2644681
Regards,
Mike
Did you find fastboot files for it?
Sent from my XT912 using Tapatalk
You might brick it ...Not sure though!
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
seandop said:
Did you find fastboot files for it?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I'm not sure how to determine which file "fastboot" or rom are compatible. On my previous phone, it was possible to flash diferent country ROMS Seems this may not be the case here?
qkdxorjs1002 said:
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
Click to expand...
Click to collapse
Interesting. Does this mean every time you power on, you have to do the power vol. up vol. down? I thought you needed to keep the CID.
Also, my understanding is that you can flash non-official ROMs and keep the CID. Is that the case or are you using non official ROMs?
I found a site online suggesting to flash the international ROM on the Razr, then you can go from there, but the links to the apps to do the upgrade don't work for me. Any thoughts on this path?
Regards,
Mike
qkdxorjs1002 said:
I'm use XT910s (GSM).
You can install on it.
But you have to erase cid for install other country device's firmware (GSM).
Click to expand...
Click to collapse
Any idea where I can find the official XT910s ROM updates? I can't do OTA in U.S.
Regards,
Mike
Firmwares are all listed here http://sbf.droid-developers.org/
I have a XT910K (Korea Telecom) and I bricked it with wrong firmware...only way I could revive it was by deleting the CID and flashing taiwanese stock JB 4.1.2.via RSD Lite..After that, I rooted it, installed Safestrap and now I have stock JB + Resurrection KK + Liquid Smooth KK + CM 11 KK, booting and working perfectly. So, beware of what you flash as/on stock, and once you have custom recovery as Safestrap or BMM, you can flash whatever you want.
Lincoln357 said:
Firmwares are all listed here http://sbf.droid-developers.org/
I have a XT910K (Korea Telecom) and I bricked it with wrong firmware...only way I could revive it was by deleting the CID and flashing taiwanese stock JB 4.1.2.via RSD Lite..After that, I rooted it, installed Safestrap and now I have stock JB + Resurrection KK + Liquid Smooth KK + CM 11 KK, booting and working perfectly. So, beware of what you flash as/on stock, and once you have custom recovery as Safestrap or BMM, you can flash whatever you want.
Click to expand...
Click to collapse
Thanks for sharing your experience.
I'm assuming you're recommending to go with Safestrap and install a 2nd OS. Couple of questions.
1: Were you able to uninstall any of the Korean specific apps? Wanted to know if there is a list of safely removeable apps.
2: Which OS do you prefer? I'm looking for performance and battery.
Thanks.
Mike
panamamike said:
Thanks for sharing your experience.
I'm assuming you're recommending to go with Safestrap and install a 2nd OS. Couple of questions.
1: Were you able to uninstall any of the Korean specific apps? Wanted to know if there is a list of safely removeable apps.
2: Which OS do you prefer? I'm looking for performance and battery.
Thanks.
Mike
Click to expand...
Click to collapse
Yes, I can recommend Safestrap since I haven't had a single problem with it so far.
1. You can uninstall any app as soon as you root your device (use Titanium Backup Pro, for example)
2.I keep one JB 4.2.2 rom and a few 4.4.2 roms on my device...since KK roms are "polished" enough now, there is no difference in performance or battery life. I would suggest KK, since it's the newest version with all features included. Roms I can recommend are Resurrection Remix, Liquid Smooth, SlimKat, Mokee OSP, Pacman etc, not necessarily in that order. My daily driver atm is Resurrection, fast, smooth and stable.
Hi,
Is there updates about your mobile,
I was looking for stable room for my xt910s after removing cid.
Related
Stock ROM JB 982.124.14.XT90.Vodafone.en.EU BMM 0.3.4THIS IS JB 4.1.2 FOR XT910 Flashable ZipTO INSTALL THIS ROM YOU NEED FLASH NEW Vodafone JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT IF YOUR PHONE NOT EUROPE EMEA REGIONKERNEL
Stock ROM
Deodexed ROM
Battery Mod
do you know if there is some new baseband, polish language, and if i can install it on any slot in bmm 0.3.4 or only on system_1 ?
xtam said:
do you know if there is some new baseband, polish language, and if i can install it on any slot in bmm 0.3.4 or only on system_1 ?
Click to expand...
Click to collapse
About baseband it's U_04.10.00R. Polski have, can install on any slot via BMM.
This is the same that HSD-Pilot post?
Have portuguese from Brazil?
Dzięki/thanks
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
PatrickDziura said:
This is the same that HSD-Pilot post?
Have portuguese from Brazil?
Click to expand...
Click to collapse
Its for Boot menu manager 0.3.4, hsd is for rsd
after flashing this kernel/rom is it possible to back to ics, or switch to vzv kernel?
artur0588 said:
Stock ROM JB 982.124.14.XT90.Vodafone.en.EU BMM 0.3.4THIS IS JB 4.1.2 FOR XT910 Flashable ZipTO INSTALL THIS ROM YOU NEED FLASH NEW Vodafone JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOT IF YOUR PHONE NOT EUROPE EMEA REGIONKERNEL
ROM
Click to expand...
Click to collapse
sweet!!!
thanks man
strielcius said:
after flashing this kernel/rom is it possible to back to ics, or switch to vzv kernel?
Click to expand...
Click to collapse
just backup your boot via bbm and u will be able to go back to stock... bbm doesnt do anything permament...
my one is
system - 672.180.41.xt910.retail.en.EU
Firmware - GAS_EMEA_USASPDRICSRTGB_P021
ICS 4.0.4
need to erase cid ?
bb race said:
my one is
system - 672.180.41.xt910.retail.en.EU
Firmware - GAS_EMEA_USASPDRICSRTGB_P021
ICS 4.0.4
need to erase cid ?
Click to expand...
Click to collapse
no
any mirror? please?
I have flashed deodexed version and I must say I'm impressed. Fast, stable and battery friendly. Everything works, no bugs at all
Also I've noticed that there is no root in the rom.
This problem was solved by installing root directly from BMM recovery, section system keeper/install root/reboot
Finally I have also system 2 with a reliable rom
Thanks a lot!
edit: can I use your 1% battery mod for leaked verizon JB on this rom?
heblu said:
I have flashed deodexed version and I must say I'm impressed. Fast, stable and battery friendly. Everything works, no bugs at all
Also I've noticed that there is no root in the rom.
This problem was solved by installing root directly from BMM recovery, section system keeper/install root/reboot
Finally I have also system 2 with a reliable rom
Thanks a lot!
edit: can I use your 1% battery mod for leaked verizon JB on this rom?
Click to expand...
Click to collapse
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
hansip87 said:
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Definitely this one! Seems a bit lighter, faster and a lot better 3G connection.
Regarding CID I think it should still be erased coz your not in EU. It shouldn't bother you as before
I didn't noticed panorama mode
Bottom line: it needs to be tested a few more days for stability, but so far I strongly recommend it
And, yes, don't forget to flash the right kernel
Enjoy
edit: I use kernel AND baseband from HSD-Pilot thread about OTA update
hansip87 said:
Hey since you have tried both, what would you prefer, this one or the verizon one? and if i install this, is erased cid still a requirement for asia retail phone like mine? And o yeah, are the improvements from verizon version, mainly the camera panorama mode is in here too?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hi i just flash it, and work like a charm.. fast and light.. also im from Asia retail Razr and no need to erase CID.
*wow my first post on XDA sorry for my bad english
heblu said:
Definitely this one! Seems a bit lighter, faster and a lot better 3G connection.
Regarding CID I think it should still be erased coz your not in EU. It shouldn't bother you as before
I didn't noticed panorama mode
Bottom line: it needs to be tested a few more days for stability, but so far I strongly recommend it
And, yes, don't forget to flash the right kernel
Enjoy
edit: I use kernel AND baseband from HSD-Pilot thread about OTA update
Click to expand...
Click to collapse
Seems tempting to try but one request, could you upload a screenshot or 2 for me? The thing i like about the verizon one is the clean statusbar (no carrier) and the razr i like text messaging theme (the green icon one). I know it might be minor but still he3..
And about the new panorama mode, it is the bomb man, really great at producing panorama shot, you could scan the area anywhere you like, almost no restriction, i could call it photo sphere alpha version so if this vodafone version has it all, i might flash it tonight
dettaskarma said:
Hi i just flash it, and work like a charm.. fast and light.. also im from Asia retail Razr and no need to erase CID.
*wow my first post on XDA sorry for my bad english
Click to expand...
Click to collapse
Welcome mate. could you tell me how you flash it? With bmm or rsd? To slot 1 or other? So no more erased cid?
Sent from my XT910 using xda app-developers app
hansip87 said:
Welcome mate. could you tell me how you flash it? With bmm or rsd? To slot 1 or other? So no more erased cid?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Yup i use BMM and i put it on Slot2 because i still keep my ICS in Slot-1 (stock) and yes no more CID erasing.. confirm, just flashing kernel between ICS and JB vodafone Rom depend on which one i use.
maybe after few days testing this rom i will move it to Slot1 as main rom replacing ICS.
before this rom i use Verizon JB but i dont like the signal bar counting seems not accurate, and finally after using the Vodafone JB all signal bar is accurate as i was using my ICS rom.
im a happy person now :victory:
hello I am from Mexico its Latin America. My phone is a xt910 GSM i used to have JB from Verizon but the wifi hotspot didn't work and I go back to ice and restored CID. For this room I need to erase CID? Or I can just flash and does the wifi hotspot works?
Sent from my XT910 using xda app-developers app
dettaskarma said:
Yup i use BMM and i put it on Slot2 because i still keep my ICS in Slot-1 (stock) and yes no more CID erasing.. confirm, just flashing kernel between ICS and JB vodafone Rom depend on which one i use.
maybe after few days testing this rom i will move it to Slot1 as main rom replacing ICS.
before this rom i use Verizon JB but i dont like the signal bar counting seems not accurate, and finally after using the Vodafone JB all signal bar is accurate as i was using my ICS rom.
im a happy person now :victory:
Click to expand...
Click to collapse
Hello, I am using retail asia razr
I am not clear about your description.
Do you mean you flash the Vodafone JB Kernel in system 2 first, then flash the zip file in system 2????
And do I need to do anything to flash rom in system 2???
Does webtop work fine with this?
Sent from my Nexus 7 using xda app-developers app
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
SimonTWolf said:
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Click to expand...
Click to collapse
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Big UPS
philharmonick said:
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Click to expand...
Click to collapse
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
SimonTWolf said:
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
Click to expand...
Click to collapse
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
dabanhfreak said:
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
Click to expand...
Click to collapse
thx mate, not impressed with AOKP or CM10 so hopefully the 4.1.2 official will keep me happy
Thank you for the answer for the old question.
I want to install http://forum.xda-developers.com/showthread.php?t=2167927 this.
I have epinter CM10.1 now.
What I need to do?
Do I need just enter the CWM and wiped everything and then flash the zip file?
or I need to do something more?
OLD:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
mizaro said:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
Click to expand...
Click to collapse
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
coolloser said:
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
Click to expand...
Click to collapse
joelorona said:
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
Click to expand...
Click to collapse
Wow, The answer is given very quickly and it very good. Thank you both
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Hello people. I think the title says it all.
I want a quick tutorial to know how to install a custom ROM on my XT910 without using Safestrap. I dont like the 3GB storage at all.
Also, I would like to know wich is the best ROM for a noob user like me. I mean, I root and nothing else, then I download APKs or from Google Play. That's all.
Thanks!
You need either Safestrap or BMM to flash a custom ROM.
Not sure what you mean by 3GB storage.
Also, don't ask for best ROM. Its against XDA rules.
Tapatalk with RAZR HD
MiloG4M3R said:
Hello people. I think the title says it all.
I want a quick tutorial to know how to install a custom ROM on my XT910 without using Safestrap. I dont like the 3GB storage at all.
Also, I would like to know wich is the best ROM for a noob user like me. I mean, I root and nothing else, then I download APKs or from Google Play. That's all.
Thanks!
Click to expand...
Click to collapse
You can't flash a custom rom without custom recovery like Safestrap or Boot Menu Manager.
About the storage,you can flash the rom on stock slot but I recommend that you flash the rom on second partition,try it and if everything is ok then you flash it on stock.
This 4.4 Kitkat roms are pretty good,I had the best battery time with Liquidsmooth 03/11 build and it's smooth and fast.
Sent from my Razr XT910
welder73 said:
You can't flash a custom rom without custom recovery like Safestrap or Boot Menu Manager.
About the storage,you can flash the rom on stock slot but I recommend that you flash the rom on second partition,try it and if everything is ok then you flash it on stock.
This 4.4 Kitkat roms are pretty good,I had the best battery time with Liquidsmooth 03/11 build and it's smooth and fast.
Sent from my Razr XT910
Click to expand...
Click to collapse
Sorry, I think I said it in the wrong way. I want to delete the stock ROM so the one I download has the 8GB for storage.
I dont want 2 ROMs, i want one that replaces the stock one.
So to do this I need to flash the rom on stock slot?
Also, wich do you think is a nice gapp to have with LS + JBX? I think slim minimal gapps but i would like to hear your answer.
Thanks and sorry for my bad english.
EDIT: I have just downloaded the last Liquidsmooth ROM named "LS-KK-v3.2-2014-07-19-umts_spyder". Would you recommend me to use JBX Kernel with this ROM? Or just the ROM and not changing anything? I want the best battery time and also a fast and smooth phone, so you tell me.
Hello everyone,
I have now been using Cyanogenmod 13.0-2016127 for awhile and I need something simpler. This ROM is full of bugs and I really just want something that works.
I am looking for a stripped-down (no bloatware, optimization tweaks would be a plus) stock Kitkat 4.4.4 ROM for the Moto E (1st generation). I think it's the XT-1021, it only has one SIM card slot.
I found this page, but it's only for the XT-1022
http://forum.xda-developers.com/moto-e/development/flashable-zip-stock-deodexed-rom-moto-e-t2823368
I have been poking around but so far all I've found is SlimKat 4.4.4, another version of cyanogenmod, and clockworkmod. I don't know how stable any of these are and I'm not interested at all in any custom ROMs at this point. All I want is a slimmed down stock ROM. Can anybody please help me find one, if it is out there?
Alternatively, a regular old vanilla stock ROM would be acceptable if no stripped-down versions are available. I haven't been able to find this either, I can only find it for the XT-1022!
Thank you.
Lollipop roms are very stable . you can use stock lollipop ROM or mokee ROM which is odexed and very stable . http://pan.baidu.com/share/link?uk=675898618&shareid=3414102494&third=0&adapt=pc&fr=ftw
arunsai123 said:
Lollipop roms are very stable . you can use stock lollipop ROM or mokee ROM which is odexed and very stable . http://pan.baidu.com/share/link?uk=675898618&shareid=3414102494&third=0&adapt=pc&fr=ftw
Click to expand...
Click to collapse
Sorry but don't understand the point of going out from XDA...
http://forum.xda-developers.com/showthread.php?t=2755857
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
Thank you very much satanas. I will try installing that 4.4.4 ROM for US retail XT-1023 tonight and I will post the results.
I was trying a cyanogenmod 4.4.4 for the past few days, but mobile data is completely disabled and it cannot use a SD for internal storage so those are two major problems.
Here's a couple more simple questions.
1. Is there a stripped-down version of the stock ROMs that satanas just linked to? That would be awesome!
2. Is there anyway to relock my boot loader and restore my warranty after I reinstall a stock 4.4.4 ROM?
Thank you all!
Bycote2 said:
Thank you very much satanas. I will try installing that 4.4.4 ROM for US retail XT-1023 tonight and I will post the results.
Click to expand...
Click to collapse
You're welcome
Bycote2 said:
I was trying a cyanogenmod 4.4.4 for the past few days, but mobile data is completely disabled and it cannot use a SD for internal storage so those are two major problems.
Click to expand...
Click to collapse
There is a nice CM11 based KK from regretted Carbon Team. maintained by ashwin007
http://forum.xda-developers.com/moto-e/development/rom-carbonrom-t3147366
Installed on my son's E before upgrading to CM12.1 LL BlissPop, very nice rom...
Bycote2 said:
Here's a couple more simple questions.
1. Is there a stripped-down version of the stock ROMs that satanas just linked to? That would be awesome!
Click to expand...
Click to collapse
I don't know, but don't hesitate to ask lost101...he's the E & G roms great Guru and he'll surely give you the good answer.
Bycote2 said:
2. Is there anyway to relock my boot loader and restore my warranty after I reinstall a stock 4.4.4 ROM?
Click to expand...
Click to collapse
Seems to be some tutorials but never tested...by the way, keep in mind that Motorola already knows your phone is unlocked !!! They gave you the code to do so !!!
That's the game, in fact...don't be to worried, these Moto's are really good stuff...Of course, you have to follow procedures carefully if you want everything perfect
Bycote2 said:
Thank you all!
Click to expand...
Click to collapse
You're welcome