Related
Didnt drop the phone at all. Could it be that i went to a cold country? Negative 5 and then i'm back in the tropics.
When it happened to me because I dropped it, I bought a new adapter on ebay for like $5 and installed it myself. it's super easy
how to use adapter he is talking about the S3
you take the phone apart and replace the slot. but don't do it if you don't know anything about it
Glebun said:
you take the phone apart and replace the slot. but don't do it if you don't know anything about it
Click to expand...
Click to collapse
Please put a link to similar article.
Regards.
what article? just watch a disassembly video on YouTube
Glebun said:
what article? just watch a disassembly video on YouTube
Click to expand...
Click to collapse
I mean the adapter that you bought.
just search. "sd card adapter i9300", it's not hard
Glebun said:
just search. "sd card adapter i9300", it's not hard
Click to expand...
Click to collapse
Maybe I don't understand correctly, I didn't find any spare part like this in ebay, maybe I am not lazy, anyways if you are lazy to put a link about an item that you bought or don't want to help others isn't my problem.
Regards.
There you go
http://m.ebay.com/search?kw=i9300+s...=12&pgn=1&epp=24&cid=&cnm=&fads=1&mfs=&acimp=
Sent from my GT-I9300 using xda app-developers app
Don't ignore the more likely cause of this issue- the SD card is broken.
what to do ? which screen u recommand there cheap one for 16$ in ebay someone tried it ?
my phone felt from not high i block the fall with my shoes and still the screen cracked :crying:
however everything is working
touch.... lcd didnt damaged
thx for any help and sorry for my english
You might be better off leaving it as is. When my screen cracked I found a few threads about replacing it and it messed up a lot of people's phones, leaving the touch screen not working properly.
There was one posted as a tutorial, a search should find it. It might be in the General section rather than this one since it was from before they split out this Q&A section.
if you plan on leaving the cracks i would suggest on getting one of the cheap "screen protectors" that you can find at your mall. that way if the glass gives it wont take your finger with it. IMO
Call Verizon. Your speaker is blown. Profit.
Phaded said:
Call Verizon. Your speaker is blown. Profit.
Click to expand...
Click to collapse
No.
pro technician will fail fix it too ?
synisterwolf thx for tip i figure it and put the protector back
Phaded said:
Call Verizon. Your speaker is blown. Profit.
Click to expand...
Click to collapse
Then pay $300 and profit?
I feel your pain
my screen is also pretty severely cracked. i did purchase a replacement digitizer for when it no longer works. for now, im leaving it alone because of the risk of it not working properly. i did put on a screen protector and even went so far as to put it in an otterbox too, to protect it. my advice is to do the same of similar. it seems the best course of action until the digitizer doesnt work properly anymore, then try fixing the screen.
zetsumeikuro said:
Then pay $300 and profit?
Click to expand...
Click to collapse
Lol... You think they really check? They don't.
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
GrayTheWolf said:
No.
Click to expand...
Click to collapse
I know, god forbid you screw over a company that looks for every reason to charge you money right? The audacity!
Phaded said:
Lol... You think they really check? They don't.
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
I know, god forbid you screw over a company that looks for every reason to charge you money right? The audacity!
Click to expand...
Click to collapse
What's to check? The screen is cracked, there's no missing that. They won't warranty a phone with a cracked screen.
feralicious said:
What's to check? The screen is cracked, there's no missing that. They won't warranty a phone with a cracked screen.
Click to expand...
Click to collapse
Like I said before,
100 point inspection means they check to see if there are at least 100 working pixels.
feralicious said:
What's to check? The screen is cracked, there's no missing that. They won't warranty a phone with a cracked screen.
Click to expand...
Click to collapse
The reason you send in your phone does not matter to the warehouse that receives them. They just scan the barcode, which then shows as received in the Verizon system. The warehouse determines what needs fixed and fixes it. Condition of the phone isn't an issue.
So you call tech support. You tell them a speaker blew, which is manufacturer warranty covered = free replacement. You send in the cracked phone. You don't get charged. Profit. Got it?
And I did this within the last month. It works. Always has. From my Eris days to today, always works...
---------- Post added at 05:15 PM ---------- Previous post was at 05:13 PM ----------
Now queue up the "OMG Verizon jacks up costs because people like you!" posts...
I had a cracked screen and they said no warranty. That I would get charged.
Oh, nm, I see what you're saying now. Well that's taking a chance on being charged I suppose.
Phaded said:
The reason you send in your phone does not matter to the warehouse that receives them. They just scan the barcode, which then shows as received in the Verizon system. The warehouse determines what needs fixed and fixes it. Condition of the phone isn't an issue.
So you call tech support. You tell them a speaker blew, which is manufacturer warranty covered = free replacement. You send in the cracked phone. You don't get charged. Profit. Got it?
And I did this within the last month. It works. Always has. From my Eris days to today, always works...
---------- Post added at 05:15 PM ---------- Previous post was at 05:13 PM ----------
Now queue up the "OMG Verizon jacks up costs because people like you!" posts...
Click to expand...
Click to collapse
lmfao, i had a customer who tried exactly what you did and they charged him $300.
i had another customer who did it with a water damaged phone where the outside indicators didn't show it but the internal one did, and they charged him $300
hahaha you got lucky, dude. be happy. others don't get that lucky.
Phaded said:
The reason you send in your phone does not matter to the warehouse that receives them. They just scan the barcode, which then shows as received in the Verizon system. The warehouse determines what needs fixed and fixes it. Condition of the phone isn't an issue.
So you call tech support. You tell them a speaker blew, which is manufacturer warranty covered = free replacement. You send in the cracked phone. You don't get charged. Profit. Got it?
And I did this within the last month. It works. Always has. From my Eris days to today, always works...
---------- Post added at 05:15 PM ---------- Previous post was at 05:13 PM ----------
Now queue up the "OMG Verizon jacks up costs because people like you!" posts...
Click to expand...
Click to collapse
First question the CSR asks is if there is any visible sign of use. IE cracked screen, buttons missing ect.
I don't see how you can get around a crack screen.
Sent from my iPhone...
I just never mention it... Done it a few times. Never been charged. Maybe I just get lucky. Even if I did get charged, I would dispute the hell out of it and blame FedEx for damaging the package.
is online.
https://www.ifixit.com/Teardown/Nexus+6P+Teardown/51660
Thanks, was waiting for them to post 6P teardown. Mostly interested in battery replacement down the road.
Looks harder than 5X for sure.
Repairability score of 2? woah replacing the screen is gonna be a pain if it breaks.
Atleast the battery can be replaced with some paitience, hate to see that the visor must be pried open as well.
syntrix said:
is online.
https://www.ifixit.com/Teardown/Nexus+6P+Teardown/51660
Click to expand...
Click to collapse
Woww 2...
My main concern is replacing the battery so the only real challenge here is getting the visor off without cracking it... apply some heat gun magic to soften the glue? I've never cracked a screen yet *knocks on wood* so hopefully that remains a non-issue.
Well that sucks. When putting it back together, what adhesive would you use to re-attach the bottom piece and the visor?
I can see 2xSIM card slots
Fredro said:
I can see 2xSIM card slots
Click to expand...
Click to collapse
Yeah totally. Looks like the hardware for dual SIM is still there even though the SIM card tray only has one slot... I'm sure someone's going to figure out how to use that eventually. Will probably need a modified SIM tray and some software tweaks.
richie.slayer said:
Repairability score of 2? woah replacing the screen is gonna be a pain if it breaks.
Atleast the battery can be replaced with some paitience, hate to see that the visor must be pried open as well.
Click to expand...
Click to collapse
Nexus Protect...... SquareTrade........
so glad i got nexus protect.... i figured it was going to be a PITA to fix just as the HTC ONEs....
this time its the easy way out... stay calm and get replacement
tech_head said:
Nexus Protect...... SquareTrade........
Click to expand...
Click to collapse
Both of which aren't available in India
bigdave79 said:
Yeah totally. Looks like the hardware for dual SIM is still there even though the SIM card tray only has one slot... I'm sure someone's going to figure out how to use that eventually. Will probably need a modified SIM tray and some software tweaks.
Click to expand...
Click to collapse
Second slot was open on a leaked video from Russia before release IIRC. The ones I've seen (USA) have a plastic bar that runs through the inner "holder" part. Wonder if it's going to be as simple as cutting it or maybe they removed the "tray" that sim card actually sits in. Call to arms for someone to take some detailed tray pictures now
should it be as simple as putting "anyone's" activated SIM in the second tray, and then you've got two numbers on your phone? how does Android handle multiple SIMs? do we know? does it set up multiple profiles? i think someone should find out.
richie.slayer said:
Both of which aren't available in India
Click to expand...
Click to collapse
Yeah, no Nexus Protect or SquareTrade blows.
No protection plan companies in India?
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Mod please move if in wrong section.
Click to expand...
Click to collapse
This is great news. Will make a DIY one again soon.
Ps. Wrong section tho, ask mods to move to accesories or general.
Sent from my SM-G935F using Tapatalk
Heh i used to sell those back in the captivate days... good times
You are in the right Section to me! It's part of recovery, not an accessory in generic sense!
It was also able to reboot the tamper counter before, will it do so with the s7 ?
It'a good that I haven't lost my old USB jig from S2 days
EarlZ said:
It was also able to reboot the tamper counter before, will it do so with the s7 ?
Click to expand...
Click to collapse
That I can not say for sure...until we have root I can't say
shaq1907 said:
It'a good that I haven't lost my old USB jig from S2 days
Click to expand...
Click to collapse
I know right I happen to find mine and gave it a try and it work
Thread moved ok.
Thanks,
Bajanman
Bajanman said:
Thread moved ok.
Thanks,
Bajanman
Click to expand...
Click to collapse
Thank you..
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Click to expand...
Click to collapse
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
TehPirate_ said:
I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy
Click to expand...
Click to collapse
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
annson08 said:
i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.
Click to expand...
Click to collapse
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
kitila said:
I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.
Hi, can you upload the video please and if possible, show a link to buy or make the jig.
Thanks in advance
Click to expand...
Click to collapse
@kitila,
I found this topic Googling for this same info, so thanks for reporting that the USB Jig still works with S7!
kitila said:
This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.
Click to expand...
Click to collapse
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Thank you for the correction on that I knew it was 100 something
Can anyone confirm that this really works? My S7 seems to be hard bricked
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
Can you point to where on ebay to get one? I can't seem to find the right search terms.
Thanks.
*Detection* said:
Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)
Or easier, buy one for a couple £ on ebay
Click to expand...
Click to collapse
good to know, I've got a 1,000 pack of 10k resistors in my desk lol
It's not what you buy its what you build
Is the Asus Mobile Desktop Dock the same as the first one or different? I know they changed the box but is that all as the model of the new one supposedly says zs660kld like the phone while the old one says zs600kld like the 1st gen phone.
Any ideas would be great, if not when is the release for the 2nd model?
Check This youtube video
Linus Tech Tips has a unboxing and review of the ROG II phone and all the accessories.(although he is a ****ty reviewer). There is a part when he gets to the dock where he talks about differences he notices from the old one. But besides that, i dont think there are any differences. Mostly what he talks about is weight and the light on the front and stuff.
---------- Post added at 09:53 AM ---------- Previous post was at 09:48 AM ----------
They totally deleted the video, probably because it was so ****ty. Thats hilarious. Anywas i dont know if the new video they made about the phone covers the differences.
I got the old box model ZS600KLD and it works perfectly fine with the ASUS Rog Phone 2.
I don’t know the exact difference between both docks but I can confirm that the old dock works fine with the Rog phone 2.
Sent from my iPad using Tapatalk
---------- Post added at 01:48 AM ---------- Previous post was at 01:34 AM ----------
Check out this video.
https://youtu.be/8EEHPHCT9-E
The guy confirms that the old dock is compatible with Rog Phone 2
Sent from my iPad using Tapatalk
jameslarson4thewin said:
Linus Tech Tips has a unboxing and review of the ROG II phone and all the accessories.(although he is a ****ty reviewer). There is a part when he gets to the dock where he talks about differences he notices from the old one. But besides that, i dont think there are any differences. Mostly what he talks about is weight and the light on the front and stuff.
---------- Post added at 09:53 AM ---------- Previous post was at 09:48 AM ----------
They totally deleted the video, probably because it was so ****ty. Thats hilarious. Anywas i dont know if the new video they made about the phone covers the differences.
Click to expand...
Click to collapse
Yes i seen that video, it was a mess of a review lol. I seen that he said that it was pretty much the same etc. but i am curious on what else has changed for the the model number to have changed and the box, otherwise why re-release the same product? since with the Mobile Professional Dock didn't get re-released but yet compatible with the ROG Phone 2.
I want to know if features are missing/added with the different versions? Has anyone tried this device?
Also is the Mobile Desktop Dock 2 released yet? anyone got it and if not when is it available?
@MCube74, thanks for the video link too, any help i am grateful for
thugsta1 said:
Yes i seen that video, it was a mess of a review lol. I seen that he said that it was pretty much the same etc. but i am curious on what else has changed for the the model number to have changed and the box, otherwise why re-release the same product? since with the Mobile Professional Dock didn't get re-released but yet compatible with the ROG Phone 2.
I want to know if features are missing/added with the different versions? Has anyone tried this device?
Also is the Mobile Desktop Dock 2 released yet? anyone got it and if not when is it available?
@MCube74, thanks for the video link too, any help i am grateful for
Click to expand...
Click to collapse
I spoke to ASUS in HOng Kong and they assured me that the Mobile Desktop Dock fro last year can be used with that ROG phone 2.
I even spoke to an ASUS Sales Rep at a store and he said that the dock may very well be the same as last model. May be ASUS just changed the box to match with the box for other accessories.
Sent from my iPad using Tapatalk
MCube74 said:
I spoke to ASUS in HOng Kong and they assured me that the Mobile Desktop Dock fro last year can be used with that ROG phone 2.
I even spoke to an ASUS Sales Rep at a store and he said that the dock may very well be the same as last model. May be ASUS just changed the box to match with the box for other accessories.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
not work for me i bought two from ebay
first one i connect the power socket type c and hdmi to monitor from back
and connect display port and usb to my computer , the display port connected to vga card 1080 ti
nothing happen also tried to connect direct to monitor nothing happen no light nothing also my phone no charge when connect it to the dock
the second one same problem
i dont know maybe because my phone rooted ???? or from my phone ?
i bought my phone before 2 week
please help me
I guys
I have a rog phone2 and a dock purchase at the same time and an only works 2 times and don't work anymore.
I have to do factory reset 5 times and entry in security mode and not work anymore.
I tested to the order rog phone and works fine.
And the support is very questionable
Now I has selling de Dock lol
---------- Post added at 01:56 PM ---------- Previous post was at 01:54 PM ----------
abdullah2320 said:
not work for me i bought two from ebay
first one i connect the power socket type c and hdmi to monitor from back
and connect display port and usb to my computer , the display port connected to vga card 1080 ti
nothing happen also tried to connect direct to monitor nothing happen no light nothing also my phone no charge when connect it to the dock
the second one same problem
i dont know maybe because my phone rooted ???? or from my phone ?
i bought my phone before 2 week
please help me
Click to expand...
Click to collapse
I have a same problem and my phone
is no rooted
sotaman said:
I guys
I have a rog phone2 and a dock purchase at the same time and an only works 2 times and don't work anymore.
I have to do factory reset 5 times and entry in security mode and not work anymore.
I tested to the order rog phone and works fine.
And the support is very questionable
Now I has selling de Dock lol
---------- Post added at 01:56 PM ---------- Previous post was at 01:54 PM ----------
I have a same problem and my phone
is no rooted
Click to expand...
Click to collapse
the problem from the dock
its not compatible with the new rog phone 2
i have test it today with the new desktop dock 2 zs660kld work great and my phone rooted
maybe because i have update my phone to latest ww update ?
abdullah2320 said:
the problem from the dock
its not compatible with the new rog phone 2
i have test it today with the new desktop dock 2 zs660kld work great and my phone rooted
maybe because i have update my phone to latest ww update ?
Click to expand...
Click to collapse
when you connect your phone to the dock, you will be asked to update the firmware. Did you do that with the first dock?
Both docks are identical. Probably just the software update is needed.
sotaman said:
I guys
I have a rog phone2 and a dock purchase at the same time and an only works 2 times and don't work anymore.
I have to do factory reset 5 times and entry in security mode and not work anymore.
I tested to the order rog phone and works fine.
And the support is very questionable
Now I has selling de Dock lol
---------- Post added at 01:56 PM ---------- Previous post was at 01:54 PM ----------
I have a same problem and my phone
is no rooted
Click to expand...
Click to collapse
MCube74 said:
when you connect your phone to the dock, you will be asked to update the firmware. Did you do that with the first dock?
Both docks are identical. Probably just the software update is needed.
Click to expand...
Click to collapse
when i put my phone nothing happen
, the working one that i have tested it
it come with rog phone 2 full bundle and it work directly no update nothing just plug and play
also little different not same the old one
abdullah2320 said:
when i put my phone nothing happen
, the working one that i have tested it
it come with rog phone 2 full bundle and it work directly no update nothing just plug and play
also little different not same the old one
Click to expand...
Click to collapse
So you have both docks? Can you take a closeup picture of both docks?
Also can you install the Aero case on the phone and then insert the phone in the dock? Can both phones be docked with the aero case on?
Just wondering if the new dock has more space for the case compared to the old dock.
Sent from my iPad using Tapatalk
MCube74 said:
So you have both docks? Can you take a closeup picture of both docks?
Also can you install the Aero case on the phone and then insert the phone in the dock? Can both phones be docked with the aero case on?
Just wondering if the new dock has more space for the case compared to the old dock.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
its acutaly same but different in lighting and material color
sorry i cant take photo because i resend the dock back to the seller
abdullah2320 said:
its acutaly same but different in lighting and material color
sorry i cant take photo because i resend the dock back to the seller
Click to expand...
Click to collapse
No problem.
Can you test to see if you can dock your phone with the Aero Case installed?
Can you at least take pictures of your current dock? I will post pictures of mine.
Sent from my iPad using Tapatalk
Here are pictures of my Mobile Desktop Dock (ZS600KLD). It is the old model which I got free.
It works fine and I also played a game last night with my keyboard and mouse. I just don't know how to do the key mapping properly. Need to figure it out as I tried it the first time yesterday.
The thing is that I have installed a clear 3M film protection around the phone. This is to help avoid scratches on the phone. Kind of like a clear Slickwraps skin.
When I dock and then undock the phone then there are 2 marks at the back of the phone. Probably because there are these rubber nubs on the dock which are pressing on the back of the phone, which are the cause of the 2 marks at the back of the phone.
I am wondering if the new dock has more space which will avoid making those marks. What do you guys think?
Did you connect the mini usb 2.1 (its a flat usb 2.1 dual connector, similar to the charger port on a Note 3) i heard that is needed to get power but is not included in the box
THREAD CLOSED as a respective thread already exists. If interested in this subject, please follow https://forum.xda-developers.com/rog-phone-2/accessories/multimedia-dock-asus-rog-phone-2-t3979995
The posts of this thread have been copied to the other thread. @thugsta1 XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse