{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is ONLY for the DROID RAZR XT912 and DROID RAZR MAXX XT912. Do NOT use this on an XT910!
DROID RAZR Utility XT912 Jellybean
Use a Download Manager such as "Orbit Download Manager" for best downloading results.
Mirrors:
Dev-Host
NetLoad
Batakang
Filesize: 480 MB (503,317,180 bytes)
MD5: A97EE9A80CA38C9D4C85FFCAB828D8F0
- Windows Instructions
Extract .zip to its own folder on the Desktop.
Install the required drivers. The folder with the drivers is called "Drivers [WINDOWS ONLY]" and is included in the Utility folder.
Double click the ".bat" file. This will be called "WindowsUtility.bat" the image is just for reference.
- Mac & Linux Instructions
Extract the .zip to any folder you like, the /Downloads/ or /Desktop/ folder should work just fine.
Open a Terminal window. (On Mac: Applications > Utilities > Terminal)
Learn your 'sudo' password. This is almost always your Admin password on a Mac computer. On Linux you should already know what this is, its yours account password if your account is an admin as well.
Type the following code into the Terminal Windows, places where it says ***DRAG HERE*** are telling you to simply drag the folder there. For example: cd ***DRAG FOLDER HERE*** then press 'Enter' after each line.
Code:
cd ***DRAG UNZIPPED UTILITY FOLDER HERE***
chmod +x ./LinuxMacUtility.sh
bash ./LinuxMacUtility.sh
You will be asked for your sudo password at least once in the Utility process, so make sure you followed the instructions to learn it.
Functions of the DROID RAZR Utility XT912 Jellybean:
Code:
1 Flash Official Jellybean Firmware (Wipe Data)
2 Flash Official Jellybean Firmware (No Data Wipe)
3 Razr Blade: Motorola Droid Razr 4.1 Root Exploit by djrbliss
4 Install Safestrap 3 App by Hashcode.
Number 1 Explained -- This option requires your phone be in AP Fastboot mode. It will flash the official Jellybean firmware to your device and will wipe data.
Number 2 Explained -- This option requires your phone be in AP Fastboot mode. It will flash the official Jellybean firmware to your device and will NOT wipe data.
Number 3 Explained -- This is Dan Rosenberg's DROID RAZR 4.1 Jellybean exploit called 'RAZR Blade'. This option requires your phone to be booted normally, with USB Debugging enabled.
Number 4 Explained -- This option requires your phone to be booted normally, with USB Debugging enabled. It will install Hashcode's App for Safestrap 3.11.
Remember, do not run this utility unless your phone is at 100% battery OR you have bought yourself one of Team Black Hat's Factory-Style Programming Adapters.
Thanks to Hashcode for Safestrap and Djrbliss for RAZR_Blade!
Matt I used your last utility for ics and loved it
Now I'm on official JB unrooted. My question is can i just skip to step 3 and go from there?
Thanks
Sent from my DROID RAZR using xda app-developers app
Broadley1 said:
Matt I used your last utility for ics and loved it
Now I'm on official JB unrooted. My question is can i just skip to step 3 and go from there?
Thanks
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
These aren't steps just options
Not sure what you mean
Sent from my Galaxy Nexus using Tapatalk 2
Sorry, just wondering since I'm already on JB can I just do option 3 to root?
My bad for not making it clearer just not used to the lingo yet...lol
Sent from my DROID RAZR using xda app-developers app
Broadley1 said:
Sorry, just wondering since I'm already on JB can I just do option 3 to root?
My bad for not making it clearer just not used to the lingo yet...lol
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
So long as Smart actions was not updated yeah.
Sent from my Galaxy Nexus using Tapatalk 2
And a little love for GSM users?
Congrats!
heblu said:
And a little love for GSM users?
Congrats!
Click to expand...
Click to collapse
GSM XT910 has more than 2 dozen different retail/carriers softwares and each software version has a different secure version. So that's not going to happen as it would be way too time consuming to make and update for that many different phones. In the Verizon XT912 there is only one carrier version to worry about thankfully.
Sent from my Galaxy Nexus using Tapatalk 2
ok... need some help.. I was on ICS, downloaded the OTA update to JB, and installed. Did the whole voodoo root keeper had the root etc. Well, that was about a week ago, and now the last 2 days, I lost my root. I found this tool, downloaded it, an ran it.. didn't have root, so i used the tool to redo my phone... but i'm still having issues.. still no root access.. tried it again.. i did the whole "smart action" things, but i still have no root.. what am i doing wrong?!
thanks in advance..!!
Edit: never mind, i figured it out myself.. did some more research online.. when you do the root, the phone needs to be connected to usb (obviously), and it has to have usb debugging enabled (again, obviously..) BUT, what i didn't see posted, nor in dan's tool, is it needs to be TAKE OUT of mass storage..i put mine as media device, and it worked just fine... thanks tho!!!!
mattlgroff said:
GSM XT910 has more than 2 dozen different retail/carriers softwares and each software version has a different secure version. So that's not going to happen as it would be way too time consuming to make and update for that many different phones. In the Verizon XT912 there is only one carrier version to worry about thankfully.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
mattlgroff, you are one of the best developer for our RAZR.
Unfortunately many User in Germany lost their Root by flashing Jelly Bean OTA 982.124.14.XT910.Retail.en.EU. Same for Carrier Updates by O2 or Vodafone.
Also two really good developers and really active User here in this forum. They had done a lot of great work here in Germany and other European Forum. Please help and give us some Ideas to get back Root again and let our good People not go to other new Fon Modells and Forums.
Sorry for my bad english.
medion said:
mattlgroff, you are one of the best developer for our RAZR.
Unfortunately many User in Germany lost their Root by flashing Jelly Bean OTA 982.124.14.XT910.Retail.en.EU. Same for Carrier Updates by O2 or Vodafone.
Also two really good developers and really active User here in this forum. They had done a lot of great work here in Germany and other European Forum. Please help and give us some Ideas to get back Root again and let our good People not go to other new Fon Modells and Forums.
Sorry for my bad english.
Click to expand...
Click to collapse
Have they tried RAZR Blade? It works for the Droid 4.
Sent from my Galaxy Nexus using Tapatalk 2
mattlgroff said:
Have they tried RAZR Blade? It works for the Droid 4.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes they have tried RAZR Blad, but they have a GSM XT910 (UMTS Spyder). RAZRBlade Exploit Root does not work.
@mattlgroff You are the god of those who damage their phones(I'm one of them)
with your program my moto droid maxx RZR is risen again
Thank you and I will always be your fan
phone was already rooted running the christmas JB leaked software...safestrapped also... but i messed up my stock install.soo gonna see if i can get it running again with your tool... thanks in advance.. will edit if it works
edit: so i got the tool all downloaded...tried to run it..but seems to bring up a bunch of error messages and then says phone will reboot.
Nothing happened. What should I do?
dano1282 said:
phone was already rooted running the christmas JB leaked software...safestrapped also... but i messed up my stock install.soo gonna see if i can get it running again with your tool... thanks in advance.. will edit if it works
edit: so i got the tool all downloaded...tried to run it..but seems to bring up a bunch of error messages and then says phone will reboot.
Nothing happened. What should I do?
Click to expand...
Click to collapse
Extract the zip like in the first step
Sent from my Galaxy Nexus using Tapatalk 2
mattlgroff said:
Extract the zip like in the first step
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
i did that...i run the tool..the batman looking stuff comes up.. I put my phone in ApFastBoot just like the instructions say... the phone sees its connected to USB.. i selected option 1. the .bat flashes some stuff which look like error messages and then it says 'press any key and the phone will reboot' well i do.. the phone doesn't reboot and there is no software installed on the phone.
You unzipped (extracted) files to your desktop, and made sure you have your drivers installed? Because I had the same issue and I needed to unzip (extract) files then it worked. It will pop up without extracting, but it won't communicate with phone
Sent from my DROID RAZR using xda app-developers app
Broadley1 said:
You unzipped (extracted) files to your desktop, and made sure you have your drivers installed? Because I had the same issue and I needed to unzip (extract) files then it worked. It will pop up without extracting, but it won't communicate with phone
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
do they go directly to the desktop..or in a folder on the desktop?
edit: its working currently....
edit 2: Whoo hooooooo!!!! All is working... i was able to restore root and reboot into my safesystem CM10.1 that i was running..and I got my stock system back along with it being the newest JB4.1.2 .16 version from Verizon!! matt you are a lifesaver to me once again!!!! and thanks to Broadley as well for the useful tip about putting it on the desktop...if i had read the instructions throroughly it woulda been fixed yesterday LOL
Matt, Thanks a lot for the utility. It works for me.
There is a small issue I've experienced during rooting (option #3)
I've chosen #2 for upgrade and then #3 for root.
Since I had some smart action saved before the upgrade the script failed to access some file due to permission. I've deleted all previously smart action scenarios and run $3 again. The script has finished successfully.
Again thanks for this utility
i have some problems with this.. i had the motorola droid razr xt912 with gingerbride and now i used this and the phone have artifacts and blinks a lot!! i cant use it like that and i dont know what to do now!! pls help...
granadier said:
i have some problems with this.. i had the motorola droid razr xt912 with gingerbride and now i used this and the phone have artifacts and blinks a lot!! i cant use it like that and i dont know what to do now!! pls help...
Click to expand...
Click to collapse
Try wiping data.
Sent from my Galaxy Nexus using Tapatalk 2
Related
This thread is specially for people who are new in Motorola, and don't know how to solve their problems,
Click to expand...
Click to collapse
There are some necessary tools for all Motorola users that i'm trying to explain about them briefly :
Click to expand...
Click to collapse
1- Motorola Drivers
This is a must have software you have to install on pc or laptop, it's impossible for pc to detect your phone without this software, so do it
Click to expand...
Click to collapse
2- RSD lite
This is official software from Motorola to flash Fastboot files to the device, so you have to install the software on your pc or laptop,
After flashing a costum rom, you can revert to stock with this software, also when you are in a
bootloop you can go back to stock Rom with this software:
Click to expand...
Click to collapse
- download fastboot file you need from here or here
- extract it in a folder, you have a XML file here
- run RSD lite
- browse XML file to the empty box
- connect the phone to the pc via usb cable in AP Fastboot mode
- click start button on RSD & be patient to flash the files
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some Tips of Razr:
- when the phone is freezed or you are in a bootloop, you can force the device to power down, just push & hold Vol - and Vol+ and
power buttons at the same time for 10 seconds, the phone will be shut down
- for going to boot menu, first turn off the phone, then push & hold Vol buttons and power button at the same time
for about 10seconds, then you will enter to boot menu, now use Vol - button to scroll and Vol + to select an option.
- for going to Stock Recovery, you have to select "recovery" in boot menu, then you'll see a black screen with Android triangle in the middle, now you have to push Vol - + buttons at the same time to enter to recovery
Click to expand...
Click to collapse
I'll update this post soooooon
is this helpful? feel free to push ------------------------------------------------------------------------------ THANK BUTTON
reserved for next updates
This will be of great help to all of us! Nice job.
Not quite a noob, but it's nice to see this in one posting. Gracias!
Question about reverting to stock to return to Verizon.
I never had to return my Incredible do noob on UNroot.
Do I simply unroot and that 'Covers'my tracks? Or should I revert back to 2.3.5/173?
My earpiece crackles so I need a replacement
Sent from my DROID RAZR using XDA
blcklab said:
Question about reverting to stock to return to Verizon.
I never had to return my Incredible do noob on UNroot.
Do I simply unroot and that 'Covers'my tracks? Or should I revert back to 2.3.5/173?
My earpiece crackles so I need a replacement
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
I have xt910 & i dont know about versions of verizon, if you are on 2.3.5 now so you can revert simply with rsd lite & no need to unroot,
But if your current android version is 2.3.6 you have to take a look at this thread:
http://forum.xda-developers.com/showthread.php?p=21575589
Sent from my XT910 using Tapatalk
So unroot Might not be enough for a warranty return?
Sent from my DROID RAZR using XDA
Thanks, you are the best, used this for fix my phone!
blcklab said:
So unroot Might not be enough for a warranty return?
Sent from my DROID RAZR using XDA
Click to expand...
Click to collapse
Flash via Rsd will unroot your device, and sure, itz enough
Newbieshwa said:
Thanks, you are the best, used this for fix my phone!
Click to expand...
Click to collapse
Not at all, My pleasure
Sent from my XT910 using Tapatalk
You may want to add after flashing a stock rom in RSD, if you are stuck at the moto logo, to reboot into recovery and do a system wipe again to fix.
I got stuck with the Android triangle! I think I read somewhere to tap all 4 corners then hit home. That didn't work but I got the power button and that did the trick. Went straight to stick recovery and I rebooted the phone. We'll return today and get another although it pisses me off because I bought a new phone last week and afaik the replacements are refurbs
Sent from my A500 using XDA
Hello , noob here .
How do i know what fastboot file i need ?
i have a swedish XT910 ..
Thx
carlsberg112 said:
Hello , noob here .
How do i know what fastboot file i need ?
i have a swedish XT910 ..
Thx
Click to expand...
Click to collapse
Go to setting > about phone
And look at your system version and build number,
Also you can flash other fastboot files such as UK, but i don't know about supporting your language
Sliced by my Razr on Tapatalk
Who knows where is this ROM came from umts_SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_DATDE_CFC_HWp2b_SIGNED.xml.zip ?
Its clear with other roms - Retail, O2 & T-Mobile. But i dont know what means DATDE..
can you please send me a build prop file for umts spider xt910 please to [email protected] please
* Edit: found what I was looking for, please ignore!
Hello, I also do not know where to look at. I actually want to unlock my phone from uk's O2 and I do not know which rom to flash into? soory for being noob. Any help would much appreciated!
alexpen said:
Hello, I also do not know where to look at. I actually want to unlock my phone from uk's O2 and I do not know which rom to flash into? soory for being noob. Any help would much appreciated!
Click to expand...
Click to collapse
If u wanna unlock your device from ur carrier, look @ http://www.cellunlock.net/mobile/default.aspxhere
Also u can googling other sites for unlocking phone, then u can find fastboot files from op to flash
Sliced by my Razr on Tapatalk
zeidof said:
If u wanna unlock your device from ur carrier, look @ http://www.cellunlock.net/mobile/default.aspxhere
Also u can googling other sites for unlocking phone, then u can find fastboot files from op to flash
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
Nice tutorial zeidof
Sent from my XT910 using Tapatalk 2
Which fastboot file can I use for a Verizon Razr?
hi all,i have been trying to return to 1.73 using matts dru,i keep getting this message after selecting 1 in the dru,"files\moto-fastboot'is not recognized as an internalor external command,operable program,or batch file,i am using a razr xt912 rooted with the moto-fail exploit,what am i doing wrong or missing?
Did you dl the lite or full version? I can't remember the errors I got, but I tried reflashing to .173 using the lite version, which doesn't come with the fastboot files.
n8w said:
Did you dl the lite or full version? I can't remember the errors I got, but I tried reflashing to .173 using the lite version, which doesn't come with the fastboot files.
Click to expand...
Click to collapse
forgive my noobness,but full or lite versions of what?
djerk said:
forgive my noobness,but full or lite versions of what?
Click to expand...
Click to collapse
Of Matt's app.
cheekrox said:
Of Matt's app.
Click to expand...
Click to collapse
weird,ipulled matts dru off xda,there is no mention of a paid version,some forums say i need safestrap installed on my phone and p.c, links anyone
djerk said:
weird,ipulled matts dru off xda,there is no mention of a paid version,some forums say i need safestrap installed on my phone and p.c, links anyone
Click to expand...
Click to collapse
There is no paid version of his utility. Are you in fastboot ap mode on your phone when you try to use his utility?
Sent from my DROID RAZR using Tapatalk 2
yes i'm in ap fastboot mode,i downloaded 2 versions of dru one is a 7-zip file which i can't open on my pc even though i downloaded the program to do it ,i don't know what type of file the other version is got it from matts xda post,it opens and runs but again i get the script saying files\moto-fastboot ect...when i first tried to root using doomlord it installed the bionic bootstrapper the root didn't take so i uninstalled the bootstrapper and rooted using motofail i don't have any boot or safe strap installed,please someone help me i want to be ready when ics rolls out,.......
I'd suggest going back to Matt's thread, and going through a few pages as there is an updated version. I think it's also posted at another razr forum. Delete the versions you have just to eliminate any confusion. You may also just want to use RSD. It took me a few tries to get the right fastboot file, but once I did I just had to ota to .173 then to .181.
n8w said:
I'd suggest going back to Matt's thread, and going through a few pages as there is an updated version. I think it's also posted at another razr forum. Delete the versions you have just to eliminate any confusion. You may also just want to use RSD. It took me a few tries to get the right fastboot file, but once I did I just had to ota to .173 then to .181.
Click to expand...
Click to collapse
i think i downloded the newest version of matts utility today,i even created a new user account on my pc incase some other program is interfering,and when i run the utility i still get the same message i wrote about when i started this thread i'm starting to think i'll never get to taste ics when it comes out, maybe matt would help me!
djerk said:
forgive my noobness,but full or lite versions of what?
Click to expand...
Click to collapse
wow if only i would have listened to you sooner,i assumed lite or full version meant paid or free!I was at my wits end yesterday so i emailed matt and while i was reading his response something clicked in the back of my head so i went to matts thread and downloaded the full version which includes the fastboot files and tada i'm now running on the 181 update!now i just have to reroot and restore my apps from titanium and i'll be set,thanks to you and matt and all on xda who tried to help me,if i wasn't so bullheaded and paid attention i'd have had this done weeks ago,now come on ics!!!!!!!!!!
The day before yesterday I found there's a 4.1.2 OTA available for my Xt912,so i upgrade my pnone to 4.1.2,and i use voodoo OTA to keep root,but when i use razrbootstrap(unofficial recovery)to install a 3W_3G(To enable the CDMA 3g) pakage,after that i reboot the phone but only to find that it had this screen, saying "Encryption unsuccessful" and your only option a button that said "Reset Phone"........
How can i get my phone working again(I am a Chinese,a little Chiglish)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You'll need moto-Fastboot and the 2 winADB.dll's you can find in most root packages.
Open command prompt (admin)
Boot phone into APfastboot
Navigate to folder with Fastboot
Moto-Fastboot erase cache
Moto-Fastboot erase userdata
Moto-Fastboot reboot
Be careful about flashing and using ICS hacks and recoveries n such. I've found not all are JB compatible.
~SU!C!D3~ on Tapatalk
queberican351 said:
You'll need moto-Fastboot and the 2 winADB.dll's you can find in most root packages.
Open command prompt (admin)
Boot phone into APfastboot
Navigate to folder with Fastboot
Moto-Fastboot erase cache
Moto-Fastboot erase userdata
Moto-Fastboot reboot
Be careful about flashing and using ICS hacks and recoveries n such. I've found not all are JB compatible.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
THx! Can i reinstall the OTA pakage through the moto official recovery?
syfhue said:
THx!
Click to expand...
Click to collapse
I'll have a try, any ideas?
I don't think you can or would need to reinstall.
~SU!C!D3~ on Tapatalk
queberican351 said:
I don't think you can or would need to reinstall.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
will the operation break the data on internal storage or sdcard
Not on mine it didn't.
~SU!C!D3~ on Tapatalk
queberican351 said:
Not on mine it didn't.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
you mean the problem lies to the unofficial recovery for ICS?It's nothing to do with the package I install?
I can't say for certain. But I know whenever I installed black recovery I hit the same issue. Did the Fastboot fix and it all worked fine again. Been playing with safestrap 3.05 with no problems so far. But no Roms or anything. Just installed to see if it would work fine. It could be the CDMA 3G thing you installed too.
~SU!C!D3~ on Tapatalk
queberican351 said:
I can't say for certain. But I know whenever I installed black recovery I hit the same issue. Did the Fastboot fix and it all worked fine again. Been playing with safestrap 3.05 with no problems so far. But no Roms or anything. Just installed to see if it would work fine. It could be the CDMA 3G thing you installed too.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
Good man!I had installed bootmenu and safestrap on 4.1.2,no problem indeed.but they aren't functioned well compare to installed in ICS,Now I want to know when will moto launch the 4.1.2 SBF package for RSD,could it be January?
queberican351 said:
I can't say for certain. But I know whenever I installed black recovery I hit the same issue. Did the Fastboot fix and it all worked fine again. Been playing with safestrap 3.05 with no problems so far. But no Roms or anything. Just installed to see if it would work fine. It could be the CDMA 3G thing you installed too.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
I can‘t find the tools you've mentioned,Could you give them to me?or some links? Thanks a lot!
queberican351 said:
I can't say for certain. But I know whenever I installed black recovery I hit the same issue. Did the Fastboot fix and it all worked fine again. Been playing with safestrap 3.05 with no problems so far. But no Roms or anything. Just installed to see if it would work fine. It could be the CDMA 3G thing you installed too.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
Thank you very much!My phone reboot success!
queberican351 said:
I don't think you can or would need to reinstall.
~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
A new problem!Every time when I reboot,the phone will has ""Encryption unsuccessful'error!
Same Issue
So I most definitely have the same issue. I used the unofficial Razr Bootstrap 2.0 (apparently more for ICS than Jelly Bean) after I flashed the recently released 4.1.2 on CDMA Razr Maxx. I was trying to use the CM9 battery mod....
More to the point, I'm not sure I understand the instructions fully on how to fix it. Also does it wipe your device? I'm trying really hard not to do that. I know how to go to AP Fastboot on the device. But is moto fast boot a program? I think this is it - http://forum.xda-developers.com/showthread.php?t=1953948
Any assistance is greatly appreciated.
EDIT - I figured most of it out. I can execute all the commands. But the erase userdata is going to erase all of my stuff isn't it? There's no other way to fix the issue? I'm holding out...
phlogis said:
So I most definitely have the same issue. I used the unofficial Razr Bootstrap 2.0 (apparently more for ICS than Jelly Bean) after I flashed the recently released 4.1.2 on CDMA Razr Maxx. I was trying to use the CM9 battery mod....More to the point, I'm not sure I understand the instructions fully on how to fix it. Also does it wipe your device? I'm trying really hard not to do that. I know how to go to AP Fastboot on the device. But is moto fast boot a program? I think this is it - http://forum.xda-developers.com/showthread.php?t=1953948 Any assistance is greatly appreciated.EDIT - I figured most of it out. I can execute all the commands. But the erase userdata is going to erase all of my stuff isn't it? There's no other way to fix the issue? I'm holding out...
Click to expand...
Click to collapse
You should place the folder in C/Windows/System32(I am win7),them use CMD enter the folder .....
I will give you some sceenshots when i am available.
.
I didn't have any issue of erasing my internal or external sdcard. Only my accounts and such got reset. But I make no promises, I only speak of my personal experience.
~SU!C!D3~ on Tapatalk
queberican351 said:
I didn't have any issue of erasing my internal or external sdcard. Only my accounts and such got reset. But I make no promises, I only speak of my personal experience. ~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
Thx!Mine will have the same error every time when i reboot.Does format the internal storage work?Or i will repeat the operation everytime when i reboot,this will drive me mad
Are you running an ICS custom recovery? I would remove it if so and get a JB compatible recovery or stock recovery. If that's not the issue try to determine what app or mod is installed that's conflicting with the system. New upgrades its always wise to try one thing at a time so it's easier to narrow down the variables if something goes wrong.
~SU!C!D3~ on Tapatalk
queberican351 said:
Are you running an ICS custom recovery? I would remove it if so and get a JB compatible recovery or stock recovery. If that's not the issue try to determine what app or mod is installed that's conflicting with the system. New upgrades its always wise to try one thing at a time so it's easier to narrow down the variables if something goes wrong. ~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
.
I've no idea,i only had razrbootstrap installed before.I have tried the new updated bootmenu and safestrap ,they are compitable to JB,maybe i should make a backup to protect my data,which recovery is better,BMM or SS3?
queberican351 said:
Are you running an ICS custom recovery? I would remove it if so and get a JB compatible recovery or stock recovery. If that's not the issue try to determine what app or mod is installed that's conflicting with the system. New upgrades its always wise to try one thing at a time so it's easier to narrow down the variables if something goes wrong. ~SU!C!D3~ on Tapatalk
Click to expand...
Click to collapse
Thank you for your replies so far.After one day use,my phone can entered the system normally!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Jelly Bean Anyone???
That's right, in case you didn't know, a Jelly Bean OTA was "accidentally" pushed out to lots of people on Christmas Eve. Maybe you grabbed it, maybe you didn't. Well for those of you that didn't, I have quite the surprise for you today!!!
Here it is, the "accidental" Jelly Bean OTA!!!!!
Let's go through the steps to get this on your phone. Now keep in mind, just to test out these instructions, I've done this myself since I am back on the RAZR now!
CAUTION!!!!! AFTER INSTALLING THIS UPDATE, IT IS COMPLETELY IMPOSSIBLE TO GO BACK TO ICS!!! YOU HAVE BEEN WARNED!!
Note: I am absolutely NOT responsible for anything that happens to your phone during this process.
Prerequisites:
1. Download the Jelly Bean update file and place it on the root of your external sdcard (root of sdcard means DO NOT put it in any folders, just put it on the main part of the external sdcard.) http://d-h.st/8l1
2. Download and install Winrar (free version) http://www.rarlab.com/download.htm
3. Download Mattlgroff's RAZR Utility v1.82 http://batakang.com/ftp/DROID_RAZR/DroidRazrUtility1.82.zip
4. Download and install Voodoo OTA Rootkeeper from the Play Store https://play.google.com/store/apps/...m9yZy5wcm9qZWN0dm9vZG9vLm90YXJvb3RrZWVwZXIiXQ
Update your SU Binary before backing up your root!
Install Instructions:
1. Find the zip file for the RAZR utility you just downloaded and right click on it. Select "Extract Files..." then click OK.
2. Connect your phone to your PC with a USB Cable in FASTBOOT MODE.
3. Go to the extracted folder from the Utility and double click the DroidRAZRUtility.bat file.
4. Select option 1 to fastboot back to complete stock .211 (Note: If you're just on stock rooted .211 with NO RECOVERY, skip this step. If the update fails, fastboot back to .211)
5. After fastbooting back (it will take a while) Reopen the DroidRAZRUtility.bat file.
6. Stay connected to your PC, with your phone ON normally, change the USB connection to MTP Mode, now go to Settings > Developer Options, and turn on USB Debugging.
7. Use the DroidRAZRUtility.bat file again, this time select Option 2 which will root your .211 build.
7a. Open the app drawer on your phone, navigate to SuperUser, open the app, and update your su binaries.
8. Open the app drawer on your phone and navigate to the Voodoo OTA Rootkeeper App and open the app.
9. Once the app is open, allow it Superuser Permission, then select "Protect Root."
10. Reboot Device
11. Go back to the OTA Rootkeeper App and this time select "Temp Unroot."
12. Turn your phone off. Once powered down, press and hold the power button + volume down at the same for about 9 seconds, when the screen flickers, release the buttons and quickly press all 3 side buttons (power, vol+, vol-)
13. You're now in the bootloader, press the vol- button to highlight "Recovery" and press vol+ to select it.
14. You'll be greeted with an Android on his back, press both volume buttons at the same time here to enter stock moto recovery.
15. Now in stock recovey, select "install update from external sdcard."
16. Wait for the update to finish installing (about 20-30 minutes.)
17. After the update is finished, simply reboot the phone.
18. Congratualtions!!! You now have stock Jelly Bean on your RAZR!!!
Now let's get your root permissions back!
1. Reboot your phone normally after the update finishes installing.
2. Open the Voodoo OTA Rootkeeper App
3. Select "Restore Root."
4. PROFIT!
IF YOU HAVE TROUBLE RESTORING ROOT AFTER THIS UPDATE, TRY THIS TOOL (made by mattlgroff) BEFORE DOING ANYTHING ELSE!!!!!!!
Try this tool and let me know if it works please.
Extract to desktop
Make sure you have the drivers installed
Connect phone to PC
Enable USB Debugging
Double click the FixRoot.bat file
http://d-h.st/nep
Not making any promises but it might work.
VIDEO of Jelly Bean 4.1.2 on the Motorola Droid RAZR courtesy of Tomsgt:
http://youtu.be/iLDnG0ZqxTI
ROOT ACHIEVED FOR JELLY BEAN!!!!!!!!!!
Credit to whoever found the exploit and whoever posted the topic at droidrzr.
http://www.droidrzr.com/index.php/topic/6924-root-achieved-for-jb-ota-razrmaxx-xt912/
I know that there are other threads like this one, but I honestly thought mine was a little easier to understand and a little more in laymen terms. If any Mods want this removed, please feel free to do so!
seems very simple (affecting other partitions? I mean the other ROMs installed?)
thanks
Doesn't matter, people don't really use search function.
It maybe possible to get root back by temp downgrade to ICS kernel.
I'll only reveal it when JB for umts_spyder is official.
Requirement :
- CID partition backup. So backup now before you lose root.
Code:
dd if=/dev/block/mmcblk1p18 of=/sdcard/cid.img
#It just 512kb (2kb compressed)
whirleyes said:
Doesn't matter, people don't really use search function. I add some delicious info.
It maybe possible to get root back by temp downgrade to ICS kernel.
I'll only reveal it when JB for umts_spyder is official.
Requirement :
- CID partition backup. So backup now before you lose root.
Code:
dd if=/dev/block/mmcblkp18 of=/sdcard/cid.img
#It just 512kb (2kb compressed)
Click to expand...
Click to collapse
you just miss a "1" mmcblk1p18
thank you whirleyes for your find , i'm looking forward to see it
sevenup30 said:
you just miss a "1" mmcblk1p18
thank you whirleyes for your find , i'm looking forward to see it
Click to expand...
Click to collapse
Opps. It maybe doesn't work for XT912. I take back my word.
But it never hurt to have a CID backup.
whirleyes said:
Opps. It maybe doesn't work for XT912. I take back my word.
But it never hurt to have a CID backup.
Click to expand...
Click to collapse
Lol only 1 way to find out.
Sent from my DROID RAZR using Tapatalk 2
I have read alot about this new JB leak. And as i understand it is for xt912 (USA). Will this work for xt910 (Nordic)? Or maybe it will flash but will not give me signal.
Jelly Bean video if anyone is interested
http://youtu.be/iLDnG0ZqxTI
TeddyOFLove said:
I have read alot about this new JB leak. And as i understand it is for xt912 (USA). Will this work for xt910 (Nordic)? Or maybe it will flash but will not give me signal.
Click to expand...
Click to collapse
I stand corrected, you can download it from here and try to flash: http://forum.xda-developers.com/showthread.php?t=2068716
Tomsgt said:
Jelly Bean video if anyone is interested
http://youtu.be/iLDnG0ZqxTI
Click to expand...
Click to collapse
Thank you! Added to the OP!
won't boot..
Hey guys, I ran into an issue while doing this for my brother. Once I installed the stock ICS via the tool in the OP, the phone will only boot to the motorola screen and then the phone goes completely black and will not boot. I can still get into fastboot, but if I try to reach recovery I get the droid with the red exclamation mark (so it seems the phone now has no recovery on it). I have tried redoing the process, but I'm getting the same result once the flash is complete.
Any advice on what I should do? Was using a fully charged CDMA RAZR fyi..
I appreciate any help on this and I'll be the first to admit that I almost always run into problems with Motorola phones. Is there another method or toolkit to simply get back to a bootable phone and try my luck again?
Thanks!
Does this work on a gsm xt910?? I am using stock rom but have a safestrap within so any help on what i can do!?!?
Sent from my XT910 using xda app-developers app
Nevermind.. I used RSD to flash the ICS stock. I suppose I can now go through the rest of the process in the OP?
Seems to be working fine now, so I'll continue the rest of the steps to get root and flash JB tonight. Please let me know if I'm missing anything and thanks again for any advice / suggestions.
Jikenda said:
Hey guys, I ran into an issue while doing this for my brother. Once I installed the stock ICS via the tool in the OP, the phone will only boot to the motorola screen and then the phone goes completely black and will not boot. I can still get into fastboot, but if I try to reach recovery I get the droid with the red exclamation mark (so it seems the phone now has no recovery on it). I have tried redoing the process, but I'm getting the same result once the flash is complete.
Any advice on what I should do? Was using a fully charged CDMA RAZR fyi..
I appreciate any help on this and I'll be the first to admit that I almost always run into problems with Motorola phones. Is there another method or toolkit to simply get back to a bootable phone and try my luck again?
Thanks!
Click to expand...
Click to collapse
When you see the little Android with the exclamation point, as stated in step 14:
14. You'll be greeted with an Android on his back, press both volume buttons at the same time here to enter stock moto recovery.
Irthu said:
Does this work on a gsm xt910?? I am using stock rom but have a safestrap within so any help on what i can do!?!?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Look for the process to install this in a thread made by whirleyes, this is for CDMA ONLY.
Jikenda said:
Nevermind.. I used RSD to flash the ICS stock. I suppose I can now go through the rest of the process in the OP?
Seems to be working fine now, so I'll continue the rest of the steps to get root and flash JB tonight. Please let me know if I'm missing anything and thanks again for any advice / suggestions.
Click to expand...
Click to collapse
Thank you. This is perfect. I tried many different threads with different processes, but this is the only one that got it working.
Thanks for all your work.
eaglesbaby said:
Thank you. This is perfect. I tried many different threads with different processes, but this is the only one that got it working.
Thanks for all your work.
Click to expand...
Click to collapse
Very welcome!
Sent from my DROID RAZR using Tapatalk 2
Lost root
Hi guys,
So I successfully updated to JB using the method in this thread, but now it appears that I've lost root, even though I used VooDoo and everything. Has anyone else run into this?
Shawna
waiting for GSM update
eaglesbaby said:
Hi guys,
So I successfully updated to JB using the method in this thread, but now it appears that I've lost root, even though I used VooDoo and everything. Has anyone else run into this?
Shawna
Click to expand...
Click to collapse
Voodoo worked fine for me but i have a tool I'm going to post that should help everyone.
s27moto said:
waiting for GSM update
Click to expand...
Click to collapse
Wrong thread, this is CDMA. Whirleyes already posted GSM instructions.
Sent from my DROID RAZR using Tapatalk 2
eaglesbaby said:
Hi guys,
So I successfully updated to JB using the method in this thread, but now it appears that I've lost root, even though I used VooDoo and everything. Has anyone else run into this?
Shawna
Click to expand...
Click to collapse
Try this tool and let me know if it works please.
Extract to desktop
Make sure you have the drivers installed
Connect phone to PC
Enable USB Debugging
Double click the FixRoot.bat file
http://d-h.st/nep
Not making any promises but it might work.
Hello all-
I recently bought doid x2 from my friend to replace my previous phone which i dropped, the screen broke so its busted.
It wasn't until I went to the verizon store, and activated my phone that I was told that it was rooted. It is fully functional (it is active, receives texts, calls, has wifi, apps, everything works) but I cannot update the software OTA and do not have access to my data network. So the only time I can really access the internet or do anything productive is if I have a wifi connection. And overall, the phone just functions pretty slow. I have had a blinking grey triangle in the top right corner of the screen, which I assume means that my data is roaming and thus have no access to it.
So basically I tried taking it to a repair store and they suggested that instead of paying 150+ dollars to have my old phone's screen repaired, that I post on here for help to see if I can restore this phone to its original software. I have tried doing the factory reset and in the store, they went through the restore process but it didn't change anything with my lack of access to data. I want to know if there is anything I can do to fix this issue (preferably on a macbook) or if I should just pay the money to have my old phone's screen fixed.
So does anyone know how to fix this? or if you need more information about my problem let me know and I can try to give more details
There is a guide on how to "SBF" your phone back to factory condition. I recommend doing this.
It will also remove root.
http://forum.xda-developers.com/showthread.php?t=1317707
Sent from my Rezound
Re: Droid x2 root problems
Uzephi said:
There is a guide on how to "SBF" your phone back to factory condition. I recommend doing this.
It will also remove root.
http://forum.xda-developers.com/showthread.php?t=1317707
Sent from my Rezound
Click to expand...
Click to collapse
YEAH... but all of the links that I find for these SBF guides are outdated since the phone is old. i need files and directions that are still existent and relevant that I can download, since the phone model and system is old
wizardofroz said:
YEAH... but all of the links that I find for these SBF guides are outdated since the phone is old. i need files and directions that are still existent and relevant that I can download, since the phone model and system is old
Click to expand...
Click to collapse
The 2.3.4 file still works. Downloading as I type this. Any Motorola RSD will work.
Sent from my Rezound
Re: Droid x2 root problems
Uzephi said:
The 2.3.4 file still works. Downloading as I type this. Any Motorola RSD will work.
Sent from my Rezound
Click to expand...
Click to collapse
Will it work for a macbook though? thats all i have on me at the moment
wizardofroz said:
Will it work for a macbook though? thats all i have on me at the moment
Click to expand...
Click to collapse
I think rsd is windows or Linux only.
Sent from my Rezound
wizardofroz said:
Will it work for a macbook though? thats all i have on me at the moment
Click to expand...
Click to collapse
you can use sbf_flash or ezSBF
links in my list for both in my list
sd_shadow's [Collection] of Links for Droid X2
Sent from my Amazon Kindle Fire using Tapatalk 2
New problem
Uzephi said:
The 2.3.4 file still works. Downloading as I type this. Any Motorola RSD will work.
Sent from my Rezound
Click to expand...
Click to collapse
I followed the instructions exactly on the HowTO perform a SBF forum page. In RSDLite, it says the process is complete and then before my phone can reboot or go to the next step it says FAIL in the result column of RSDLite. Then before I can do anything in RSDLite it is Not Responding and I am basically forced to close out of it. I used the RSDLite 5.4.4 so then i tried using another RSDLite but couldn't even download it.
Could it be that I am using windows 7 ?
or is there something else I am doing that might be screwing up with the process
wizardofroz said:
I followed the instructions exactly on the HowTO perform a SBF forum page. In RSDLite, it says the process is complete and then before my phone can reboot or go to the next step it says FAIL in the result column of RSDLite. Then before I can do anything in RSDLite it is Not Responding and I am basically forced to close out of it. I used the RSDLite 5.4.4 so then i tried using another RSDLite but couldn't even download it.
Could it be that I am using windows 7 ?
or is there something else I am doing that might be screwing up with the process
Click to expand...
Click to collapse
I SBF on Win7 a few times. It could be a bad download, try downloading again. Be sure you are using a USB 2.0 port and not a 3.0
Sent from my Rezound
wizardofroz said:
I followed the instructions exactly on the HowTO perform a SBF forum page. In RSDLite, it says the process is complete and then before my phone can reboot or go to the next step it says FAIL in the result column of RSDLite. Then before I can do anything in RSDLite it is Not Responding and I am basically forced to close out of it. I used the RSDLite 5.4.4 so then i tried using another RSDLite but couldn't even download it.
Could it be that I am using windows 7 ?
or is there something else I am doing that might be screwing up with the process
Click to expand...
Click to collapse
rsd lite works fine with windows 7
several things can go wrong
did you install moto drivers with Motorola_End_User_Driver_Installation_5.9.0
if not download and install Motorola_End_User_Driver_Installation_5.9.0
are you using the original moto usb data cable?
if it is a desktop pc use rear usb ports rather than front
try a different version of rsd lite, several options in my list RSD Lite mirrors
verify md5 check sum for sbf see Verify that your download is complete with MD5/SHA-1 Hash Checksums
.
.
or forget all of the above and use all-in-one ezSBF DX2 2.3.4
instructions here all-in-one ezSBF DX2 2.3.4
download here Dev-Host mirror
sd_shadow said:
rsd lite works fine with windows 7
several things can go wrong
did you install moto drivers with Motorola_End_User_Driver_Installation_5.9.0
if not download and install Motorola_End_User_Driver_Installation_5.9.0
are you using the original moto usb data cable?
if it is a desktop pc use rear usb ports rather than front
try a different version of rsd lite, several options in my list RSD Lite mirrors
verify md5 check sum for sbf see Verify that your download is complete with MD5/SHA-1 Hash Checksums
.
.
or forget all of the above and use all-in-one ezSBF DX2 2.3.4
instructions here all-in-one ezSBF DX2 2.3.4
download here Dev-Host mirror
Click to expand...
Click to collapse
So I tried using moto drivers like you said and basically the same thing happens. It said that my driver was updated but the same error occurs. It says that the flashing process failed even after it gets through execution 100% ... I haven't tried a different version of RSDLite or the method that you posted at the bottom, I am kind of busy right now but will try it later.
Any other suggestions on what might be wrong?
run again, when you see it failed, leave phone connected, rsd lite running, open windows device manager, and look for an unknown device or a small yellow triangle, if you see either, rerun moto device drivers program, then click on bad device and select update drivers
if you don't see a bad device, it could be a bad download, verify md5 checksum for sbf
Sent from my XT862 using Tapatalk 2
sd_shadow said:
run again, when you see it failed, leave phone connected, rsd lite running, open windows device manager, and look for an unknown device or a small yellow triangle, if you see either, rerun moto device drivers program, then click on bad device and select update drivers
if you don't see a bad device, it could be a bad download, verify md5 checksum for sbf
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
There seemed to be no bad device, so I was goign to try the other way that you posted, the all in one ezSPF process but the file that is on there 1KDStaz0.x.iso I am unable to download. Also the sbf I have is definitely not right according to the md5 so do you have an spf that I can run through RSDLite that will work ?
that's why i post
download from the dev host mirror
Sent from my XT862 using Tapatalk 2
sd_shadow said:
that's why i post
download from the dev host mirror
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
ok so do i still have to download unetbootin? i am currently downloading from the dev host mirror
sd_shadow said:
that's why i post
download from the dev host mirror
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
ok so I have the ezSBF.iso file and unetbootin
when i click ok and it gets put on the USB drive, im not sure what i do next maybe im not reading it correctly.
reboot pc/mac from usb drive
wizardofroz said:
ok so I have the ezSBF.iso file and unetbootin
when i click ok and it gets put on the USB drive, im not sure what i do next maybe im not reading it correctly.
Click to expand...
Click to collapse
Reboot PC
Hit F12 (sometimes F8 or esc) during boot to go to boot menu (possibly google search how to boot your specific pc from CDROM)
Select boot from CDROM
Hit enter at the yellow "boot baby... boot" screen
You will see yellow dots for 3-5 minutes then the script will start
Click to expand...
Click to collapse
Except since you did USB, you will select USB where those instructions say CDROM
Sent from my Rezound
when you reboot from usb, you should see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
choose slitaz
then you will see
press enter
if it asks about sound card select no
sd_shadow said:
when you reboot from usb, you should see
choose slitaz
then you will see
press enter
if it asks about sound card select no
Click to expand...
Click to collapse
Ok so I don't see any option at the boot screen to boot from usb just... floppy, two sata options and networking