Hi i went from the latest unlocked 4.1.2 united kingdom firmware to paranoid android 3.10.
i decided to go back to the stock 4.1.2 so i downloaded it and from sammobile and installed via odin 3 v3.07 but it is stuck on the samsung bootloop. i can hold the power, home and down which takes me into that mode but using power, home and up does nothing.
Is there any way i can get out of this boot loop and use stock firmware again?
thanks.
Can you enter recovery mode.....vol up+home+power
If you can, flash cwm recovery via odin and enter recovery mode and then factory reset
Sent from my GT-I9300 using xda premium
you dont need to flash custom recovery mode you just have to boot into stock recovery mode and reset data and cache
hit thanks if i deserve it
himorasi said:
you dont need to flash custom recovery mode you just have to boot into stock recovery mode and reset data and cache
hit thanks if i deserve it
Click to expand...
Click to collapse
is that by holding vol up, power and home?
lew87ys said:
is that by holding vol up, power and home?
Click to expand...
Click to collapse
Its all in the stickied faqs and guides answer yes.
jje
JJEgan said:
Its all in the stickied faqs and guides answer yes.
jje
Click to expand...
Click to collapse
OK thanks. i wiped everything and its now back to stock rom. thanks.
Is there a reason why it got stuck in boot loop? Was it because i didnt wipe cache and the other two things first?
lew87ys said:
OK thanks. i wiped everything and its now back to stock rom. thanks.
Is there a reason why it got stuck in boot loop? Was it because i didnt wipe cache and the other two things first?
Click to expand...
Click to collapse
Sometimes happens flashing stock Roms from custom, it may be it only occurs with aosp to stock, but always wise to backup everything as stock reset will wipe sd card
Related
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
download any rom you want like
CM10 or any other flash in recover then do a wipe
or flash stock rom via PC odin
kaiyan1 said:
I got this S2 from UK my brother sent it and he had installed custom ROM on it.
I did a factory reset on it and after that the device didn't start.
My bro told me to install Siyah Kernal to make it work again but unfortunately after installing the Kernal i am stuck in Resurrection Remix screen.
WHAT SHOULD I DO NOW?
Click to expand...
Click to collapse
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
After a full wipe (data/cache/dalvik), you should also format the /system partition and the internal SD card (save important files before). Then flash or install via recovery the ROM and everything should be ok.
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
It's volume up home and power to get into recovery
Sent from my GT-I9100 using xda app-developers app
kaiyan1 said:
Thank you everyone but when i press the power+volume dwn+home button it takes me to odin mode but not the normal screen from where i can wipe/format and do other stuff. How can i go to that recovery screen?
Click to expand...
Click to collapse
Volume up + home button + power button simultaneously. hold all of them until the samsung logo appears, then just leave the power button. Should boot into recovery.
Sent from my GT-I9100 using Tapatalk 2
Prashanthme said:
Next time post questions in Q & A thread,, BTW dont panic. Download any ROM, then wipe data, cache and in advance, wipe dalvik, Install zip from SD card. Done ur phone ll boot up.. If this doesnt help then final is flash thru ODIN check the baseband of the phone then download from SAMFIRMWARE
Click to expand...
Click to collapse
thank you for the help phone is up now
Hi guys,
I've really tried looking and I really cannot find a fix, thus this has forced me to come out of lurking and posting a thread to seek for help.
I wanted to flash back to a stock rom from my cyanogenmod10 to claim warranty for a broken digitalizer (touch screen completely not working), so my mistake was to flash via odin without wiping cache memory/factory reset and I forgot to use triangle away. (thought that i should have done that when I'm on stock rom)
so now my phone is unable to boot into home, it is stuck at the samsung logo, I can go into download mode but i have no way to get into recovery. (Holding the up vol + home + power just resets kinda restarts the phone)
Also, it seems like no matter how long I charge the phone, the battery level won't go above 10% on the standby mode charging screen.)
Anyone help ?
End of the day I really just need to get the flash counter back to zero without using the in-phone app to claim for warranty.
reflash the stock rom. if you do everything correctly, you would be able to access recovery
Glebun said:
reflash the stock rom. if you do everything correctly, you would be able to access recovery
Click to expand...
Click to collapse
I've done that at least 3 times... using odin3 v3.07 flashed with I9300XXEMA2_I9300OLBEMA1_I9300DXELK1_HOME.tar.md5 selected only F.reset and auto restart, flashed using PDA.
The Odin tells me that flashing was a success but I'm still stuck, the last time i had this problem i settled it via clearing cache, but this time i cannot go into recovery mode anymore.
-Takaki- said:
I've done that at least 3 times... using odin3 v3.07 flashed with I9300XXEMA2_I9300OLBEMA1_I9300DXELK1_HOME.tar.md5 selected only F.reset and auto restart, flashed using PDA.
The Odin tells me that flashing was a success but I'm still stuck, the last time i had this problem i settled it via clearing cache, but this time i cannot go into recovery mode anymore.
Click to expand...
Click to collapse
hxxp://i.imgur.com/1KTjUr3.jpg
Try removing the battery.
Put back and go to recovery mode.
Then wipe data / factory reset.
Reboot.
Should work after that
orbine said:
Try removing the battery.
Put back and go to recovery mode.
Then wipe data / factory reset.
Reboot.
Should work after that
Click to expand...
Click to collapse
Tried, still can't get into recovery mode.
oh well, send it in
Thats wierd.
It always worked for me.
Try reflashing cwm via odin then repeat the procedure
Glebun said:
oh well, send it in
Click to expand...
Click to collapse
I want to, but I need to reset my flash counter first.
orbine said:
Thats wierd.
It always worked for me.
Try reflashing cwm via odin then repeat the procedure
Click to expand...
Click to collapse
I repeated the procedure, Now i'm thinking about using an international rom instead of a local rom. But if i can't wipe the cache then it will still loop right '? Anyway to wipe without the recovery mode ??
Hope you can save your phine bro
orbine said:
Hope you can save your phine bro
Click to expand...
Click to collapse
I hope there is someone here that can help me though
Main concerns,
1) Reset Flash counter with computer.
2) Wipe Cache/factory reset function without going into recovery mode.
Take out battery, put it back in, press the three button Recovery combo and let go when you see the Samsung SIII screen. If you keep it pressed, it'll loop.
Do a factory reset then restart the phone.
Connect a mouse through an OTG cable and install TriangleAway to reset the counter.
Boot into recovery and factory reset. Should do the trick.
Good luck!
Sent from my GT-I9300 using xda app-developers app
Oomahey said:
Take out battery, put it back in, press the three button Recovery combo and let go when you see the Samsung SIII screen. If you keep it pressed, it'll loop.
Do a factory reset then restart the phone.
Connect a mouse through an OTG cable and install TriangleAway to reset the counter.
Boot into recovery and factory reset. Should do the trick.
Good luck!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I let it go once i see the samsung galaxy sIII GT-I9300 screen, but it doesnt go into recovery. The next screen is the swirling samsung logo.
-Takaki- said:
I repeated the procedure, Now i'm thinking about using an international rom instead of a local rom. But if i can't wipe the cache then it will still loop right '? Anyway to wipe without the recovery mode ??
Click to expand...
Click to collapse
try flashing resurrection rom , from the checkrom website through odin , am not sure if itll work , it may , but its worth a try
P.S : there are a lot of people who have submitted the phone without resetting the flash counter and have escaped with it , just your luck
Same problem. No help,
I have a serious problem in my rooted S3. After flashing a problematic rom, i was forced to reset nandroid backup(i had already flashed the rom which i take the backup) Restore was successful, but suddenly I had issues with network("not registered on network") After flashing the latest modems from this video everything was fixed.
However when i flash a new rom from recovery, the screen always freezes on samsung logo. The only solution is to reset each time the latest that nandroid I had. In addition today, i have not acess in recovery(philz). What you suggest me to do? Sorry for my enlgish and thanks in advance for the people who answer.
neymre said:
I have a serious problem in my rooted S3. After flashing a problematic rom, i was forced to reset nandroid backup(i had already flashed the rom which i take the backup) Restore was successful, but suddenly I had issues with network("not registered on network") After flashing the latest modems from this video everything was fixed.
However when i flash a new rom from recovery, the screen always freezes on samsung logo. The only solution is to reset each time the latest that nandroid I had. In addition today, i have not acess in recovery(philz). What you suggest me to do? Sorry for my enlgish and thanks in advance for the people who answer.
Click to expand...
Click to collapse
I simply suggest you to flash some custom ROM,flash some patched modem and patshed kernel and hope everything will be fine.
west421 said:
I simply suggest you to flash some custom ROM,flash some patched modem and patshed kernel and hope everything will be fine.
Click to expand...
Click to collapse
Things are not so simple. I cannot have access in custom recovery menu. As a result it is impossible to flash a new rom,modem,kernel or restore a nandroid backup...
Download mod is working?
Flash stock rom for your region, through odin
neymre said:
Things are not so simple. I cannot have access in custom recovery menu. As a result it is impossible to flash a new rom,modem,kernel or restore a nandroid backup...
Click to expand...
Click to collapse
what doyou mean you cant have access to customer recovery.
me i would hold volume up + home + power and factory reset and wipe cache, and it should boot anytime i have had a issue with the S3 not booting after flashing i just had to factory reset and wipe cache and it booted up
misacek said:
Download mod is working?
Flash stock rom for your region, through odin
Click to expand...
Click to collapse
Yes it is working. So unroot is the only solution...
dray_jr said:
what doyou mean you cant have access to customer recovery.
me i would hold volume up + home + power and factory reset and wipe cache, and it should boot anytime i have had a issue with the S3 not booting after flashing i just had to factory reset and wipe cache and it booted up
Click to expand...
Click to collapse
I mean when i press volume up+home button+power button nothing happens(it is something strange i know...)
However if i left these buttons, galaxy works normally...
http://forum.xda-developers.com/showthread.php?t=2002953
flash this cwm / recowery / select the files / tar / odin for
Add to item / PDA / a start
You'll be back recowery, cwm.
misacek said:
Download mod is working?
Flash stock rom for your region, through odin
Click to expand...
Click to collapse
Yes it is working. So unroot is the only solution...
Misacek i already have installed philz recovery in my S3, but i havent acess on recovery menu
dray_jr said:
what doyou mean you cant have access to customer recovery.
me i would hold volume up + home + power and factory reset and wipe cache, and it should boot anytime i have had a issue with the S3 not booting after flashing i just had to factory reset and wipe cache and it booted up
Click to expand...
Click to collapse
I mean when i press volume up+home button+power button nothing happens(it is something strange i know...)
However if i left these buttons, galaxy works normally...
neymre said:
Yes it is working. So unroot is the only solution...
Misacek i already have installed philz recovery in my S3, but i havent acess on recovery menu
I mean when i press volume up+home button+power button nothing happens(it is something strange i know...)
However if i left these buttons, galaxy works normally...
Click to expand...
Click to collapse
have you tried reinstalling the newest CWM of TWRP threw downloader mode and then trying to boot into it.
i would try that before i restore to stock, i prefer TWRP but it is more of a personal choice.
dray_jr said:
have you tried reinstalling the newest CWM of TWRP threw downloader mode and then trying to boot into it.
i would try that before i restore to stock, i prefer TWRP but it is more of a personal choice.
Click to expand...
Click to collapse
I dont know how i reinstall philz recovery from download mode. Could you tell me? Otherwise i think the only solution is to unroot my device...
neymre said:
I dont know how i reinstall philz recovery from download mode. Could you tell me? Otherwise i think the only solution is to unroot my device...
Click to expand...
Click to collapse
try the adb or odin flashable here
http://www.droidviews.com/how-to-install-twrp-2-4-on-samsung-galaxy-s3-i9300-and-i9305/
dray_jr said:
try the adb or odin flashable here
http://www.droidviews.com/how-to-install-twrp-2-4-on-samsung-galaxy-s3-i9300-and-i9305/
Click to expand...
Click to collapse
So i flash custom recovery via odin and then i unroot my device. right?
If you want to return your device to stock just grab the correct carrier OTA file for your X and flash it via Odin and you will be 100% completely stock. No root stock recovery and stock Rom
Sent from Rooted Sprint Moto X, TWRP, enhanced kernel
Hey guys i need some help i am trying to fix my aunts phone it is stuck in a boot loop it is most likely from an update. it was never rooted so it has no custom rom or recovery so im not sure if i can wipe the dalvik cash. i tryed flashing the stock samsung os but its still looping so im not sure it is the problem because i downloaded the trinidad and tobago version but am not sure if the phone came with it but the os and phone are internatonal versions. any help would be appreciated thanks
guyy521 said:
Hey guys i need some help i am trying to fix my aunts phone it is stuck in a boot loop it is most likely from an update. it was never rooted so it has no custom rom or recovery so im not sure if i can wipe the dalvik cash. i tryed flashing the stock samsung os but its still looping so im not sure it is the problem because i downloaded the trinidad and tobago version but am not sure if the phone came with it but the os and phone are internatonal versions. any help would be appreciated thanks
Click to expand...
Click to collapse
Boot into stock recovery Volume up + Home+ Power then factory reset wipe cache and reboot do this after every flash as standard to stop bootloops.
i tryed everything is it possible that it is a hardware problem? should i keep trying?
As the above senior member mentioned.
You could try it.
You can also re-flash the latest stock OS. You can download it from sammobile or you can plug in your device in computer and update or re-flash the OS via KIES.
tallman43 said:
Boot into stock recovery Volume up + Home+ Power then factory reset wipe cache and reboot do this after every flash as standard to stop bootloops.
Click to expand...
Click to collapse
Mustakim_456 said:
As the above senior member mentioned.
You could try it.
You can also re-flash the latest stock OS. You can download it from sammobile or you can plug in your device in computer and update or re-flash the OS via KIES.
Click to expand...
Click to collapse
how would i get kies to recognize my phone would i need to boot it in to recovery mode and ive tryed the latest updates already but it still doesnt work should i try installing cyanogen mod thanks
tallman43 said:
Boot into stock recovery Volume up + Home+ Power then factory reset wipe cache and reboot do this after every flash as standard to stop bootloops.
Click to expand...
Click to collapse
how long should it take for my phone to boot into the os?
Here is my case.
Was on 4.4.4 SlimSaber with TWRP recovery..
So, i intended to change back to stock rom. Downloaded the stock firmware from sammobile
After that, I used ODIN 3.10 to flash the stock firmware. Everything goes smoothly. But, after the process completed, I have bootloop in the Samsung logo.
Tried removing the battery and replaced it.. still the same.
Now I cant enter the Download and Recovery mode. My PC still detects my device, ODIN still show blue sign when I plugged it in
Any advice for me to recover it?
lucifer93 said:
Here is my case.
Was on 4.4.4 SlimSaber with TWRP recovery..
So, i intended to change back to stock rom. Downloaded the stock firmware from sammobile
After that, I used ODIN 3.10 to flash the stock firmware. Everything goes smoothly. But, after the process completed, I have bootloop in the Samsung logo.
Tried removing the battery and replaced it.. still the same.
Now I cant enter the Download and Recovery mode. My PC still detects my device, ODIN still show blue sign when I plugged it in
Any advice for me to recover it?
Click to expand...
Click to collapse
Wipe data and cache partition in recovery. Turn off the phone and hold 3 buttons at the same time (volume up+home+power). Then wipe data and cache.
Zile995 said:
Wipe data and cache partition in recovery. Turn off the phone and hold 3 buttons at the same time (volume up+home+power). Then wipe data and cache.
Click to expand...
Click to collapse
Sir, unfortunately I could not enter the recovery mode. I tried a few times already.
lucifer93 said:
Sir, unfortunately I could not enter the recovery mode. I tried a few times already.
Click to expand...
Click to collapse
Try a 'USB jig' to force the phone to 'Download mode' and then try flashing the stock firmware once agian and see
Zile995 said:
Wipe data and cache partition in recovery. Turn off the phone and hold 3 buttons at the same time (volume up+home+power). Then wipe data and cache.
Click to expand...
Click to collapse
Sun90 said:
Try a 'USB jig' to force the phone to 'Download mode' and then try flashing the stock firmware once agian and see
Click to expand...
Click to collapse
OK.. Will try to get one.. and try it. What if after flash the stock firmware it still the same?