[Q] How To Unbrick Glaxy Tab Imitation? - Android Q&A, Help & Troubleshooting

This is my problem, My friend bought a tablet and wanted to install the cyanoagenmod 10, I try to boot into recovery or donwload but none worked, I could not enter any, but the tablet was root, so with an application called novo, try installing the recovery officer first, then I reboot and go into recovery but volum buttons+ and volum- did not change the options, then thinking it would work, I install CWM, I reboot and brick the tablet in samsung logo, then I saw that was Chinese, now this is my question, as I can unbrick, I still can not get into recovery mode or download, as I saw in some forums unbrick some terminals, dissambled and bridge between two contacts, and saw that my friend's tablet had but I'm not sure, or there will be another method to solve it, reflashing from pc otherwise entering, or repairing the boot from the hardware,
I think it is because the boot is damaged, because so was in perfect condition before installing the recovery.
my friend said that the model of the tablet not say p1000, it's say TWD_WID
helpme please with this problem, thanks

Related

Galaxy Note 10.1 stuck on "Samsung Galaxy Note" screen

Dear all.
First of all, thanks for your attention, I really appreciate.
I have a GNote 10.1 Wi-Fi version (N8013) with stock Android 4.1.
My S-Pen was getting me crazy, because I was not able to use it correctly on the edges of the device. I tried an app that supposed to reset the alignment, but I did not work, so I googled and found that the only way to fix it was "factory reseting" the tablet.
So, I installed the TeamWin recovery and backed up my data. After that I hit the button "reboot". But before rebooting, the recovery screen "told me" that I was not rooted and "asked" if I would like to install SuperSU to get root access. I checked YES and rebooted.
After that I got stucked at the "Samsung Galaxy Note" screen (see attached file).
I've tried to switch off the note, but the screen goes off for one second and it lights up again at the same screen.
If I plug the USB cable and try to switch it off, the note goes to the battery charging screen. If I remove the USB and push the power button again, the tablet gets back to the "Samsung Galaxy Note" screen.
Odin seems to "connect" with the tablet.
I can enter both the download mode and the recovery mode (not the teamwin recovery).
Attached pictures of what I get.
Any sugestions?
Thanks!!!
Everything is ok now
Dear all,
Hope I can help you if you have a problem similar to mine.
I remembered that a PC with no OS stops on some screen, but everything else works, just as what was happening with my note.
I tought that I might have wiped more things than I should, so, the only thing I had to do was to restore the backup that I had.
To do this I should reinstall the TWRP and the only way was via Odin.
Solved the problem this way:
1. Downloaded the Odin (http://techbeasts.com/2013/08/08/download-odin-pc-latest-version-v-3-07/)
2. Downloaded the TWRP file (http://techerrata.com/get/twrp2/p4noterf/openrecovery-twrp-2.6.1.0-p4notewifi.tar)
3. Connected the Galaxy Note to my PC using the USB cable
4. Entered the "download mode"
5. Loaded the file from step 2 into the tablet using Odin
6. Rebooted the tablet
7. Entered the recovery mode (TWRP was working)
8. Restored the backup that I had
9. Rebooted again
Did the dance of victory!!!
I am so glad to have my device back.
Regards
how to access recovery mode? mine can't access recovery mode with power+volume up :crying:
rizalabd said:
how to access recovery mode? mine can't access recovery mode with power+volume up :crying:
Click to expand...
Click to collapse
Hi all
mine neither.. followed your steps with odin but still stuck in start screen (Samsung Galaxy Note 10.1). By the way mine is the 8010. I tried almost everything. Cant even load the recovery mode!.... And Have no backup either.
PLease someone help me...
Thank you in advance
I have an SM-P600
My Note 10.1 2014 Edition is stuck on the tablet title screen, not sure if its in reboot mode it returns to this screen if I try to shut it off... basically Its frozen, and when I try to shut it off it goes away a few seconds and comes back. This happened after I rooted with KingRoot, and tried to Flash a ROM, Im a complete Noob and should have done my homework... but I didnt. I see everyone suggesting odin and going into download mode... I can get to download mode but I am using a macbook pro, and there are very little options to use odin, I tried Jodin3... and Heimdall... no luck...
PLEASE HELP !
HELP stuck on Samsung screen
I didn't any root or install a different firmware to mine.
But after charging it I removed the cable and it rebooted and got stuck on the Samsung screen. I can only access to Download mode. I didn't have any Recovery mode installed, and now I can't install one successfully via Odin...
I tried to install a new firmware... a recovery mode... nothing is working...
Please I need HELP...
@ agelcer: Was your tablet rooted?
Hello. I havea similar problem with my note 2 phone. It will not get past the
samsung screen. My cpu knowledge is very limited. Are you open to accepting payment for attempting to fix my cell phone? All I want is the pictures off of it if that is all you can do to it. Pleass email me at [email protected] if you or anyone you know can help. Thanks....Jay
Same thing is happening to mine. I tried Odin but after the download the srceen goes black and then comes back to the Samsung Galaxy Note 10.1 screen.
Hello folks.
Same problem here with a n8000.
It had the stock unrooted rom probably JellyBean.
Can only access Download Mode, nothing else.
I get connection to Odin, tried to flash original firmware, 4 file firmware, re-partition with pit file, flash a custom recovery, all seem to pass through but nothing changes, still stuck on 'Samsung Galaxy Note 10.1' screen, never moves on to boot animation and still can't access Recovery Mode.
However, something else I triy with Odin and it FAILS is ticking 'Nand Erase All'. It won't let me erase nand.
Could this mean some kind of memory corruption?
Does it have anything to do with EMMC?
If it does, is there a possible way to fix without replacing the hardware?
What else can I try before giving up?
It would be nice if other users who report this problem attempt to Nand Erase All and see if it also FAILS..
Thanks alot and sorry for the long post.
Edit: after posting I found this which is PROBABLY THE SOLUTION for me.
And here is another topic on this issue.
did you find the solution?
giba_fernando said:
Hello folks.
Same problem here with a n8000.
It had the stock unrooted rom probably JellyBean.
Can only access Download Mode, nothing else.
I get connection to Odin, tried to flash original firmware, 4 file firmware, re-partition with pit file, flash a custom recovery, all seem to pass through but nothing changes, still stuck on 'Samsung Galaxy Note 10.1' screen, never moves on to boot animation and still can't access Recovery Mode.
However, something else I triy with Odin and it FAILS is ticking 'Nand Erase All'. It won't let me erase nand.
Could this mean some kind of memory corruption?
Does it have anything to do with EMMC?
If it does, is there a possible way to fix without replacing the hardware?
What else can I try before giving up?
It would be nice if other users who report this problem attempt to Nand Erase All and see if it also FAILS..
Thanks alot and sorry for the long post.
Edit: after posting I found this which is PROBABLY THE SOLUTION for me.
And here is another topic on this issue.
Click to expand...
Click to collapse
i am looking for any solution since two years without any benefit. did you find any?
chozex said:
i am looking for any solution since two years without any benefit. did you find any?
Click to expand...
Click to collapse
I assumed from my searches the solution would be JTAG or replace the EMMC.
Since I don't have the resources for any of those, I just abandoned it to the dust and rust..
bootloader
Is this after the boot loader is updated?
osirisx69 said:
Is this after the boot loader is updated?
Click to expand...
Click to collapse
I'm not very clear about bootloader upgrading, but I guess it was included in the 4 file firmware I tried flashing and it said 'success' but nothing changed..
I think it ain't just a softbrick since I can't erase nand..
What's your background, osirisx69?
This happened to ours as well just today. Unplugged it rebooted it and it's stuck. Can only access the Odin mode.
Sent from my XT1254 using Tapatalk
i got same issue at last 4 months
just try reset then got same issue.
Same problem for 3 months. Guys have anyone tried jtag flashing firmware as in this post which was provided earlier?

[Q] SKY VEGA LTE A800S Soft Bricked with damaged Volume key HELP!

Hello everyone.
I recently purchased a Sky Vega LTE A800s (used) with a damaged Volume - key. It worked perfect until i decided to install CM10 on the device.
Since it was on Stock JB, i needed to downgrade it to install cwm. I used a downgrade tool which flashes CWM, while deleting the current ROM in the phone.
After running the program, my phone rebooted and did not go furher after the 2nd boot logo. I tried to go into Recovery but due to the faulty vol key, i couldn't. Nor could i enter fastboot or Download mode.
The Phone is still recognized in ADB but does not do anything on trying to reboot to recovery via the adb command.
I'm really frustrated now as i have a Useless paperweight which isn't even hard bricked. I got it checked from 2 Technicians who after checking it told me that its gone for good...
Is my phone really hopeless? Or there is a way by which i can fix it. ANY HELP WILL BE DEEPLY APPRECIATED!
Thanks in advance.

Huawei Y5 II bricked and cant fix.

Hello,
Im new here and im not sure if here is the correct place to ask questions but,
I have a Huawei Y5 II and i was trying to put android 6.0 or higher but i had alot of problems.
I first unlocked my bootloader and then installed a custom recovery TWRP and CWM on it, but i never succeeded in booting into one of them.
What happened is that i saw in a post here on xda that with a certain command in fastboot mode i can remove the custom recoveries ( because they didnt work at all) but when i did it i ended up formatting my whole system,cache and boot.
Now my phone just stays on the huawei logo when i turn it on and nothing else.
i tried to install a custom recovery again throught the fastboot mode using adb on my pc, but when i press the vol up+ power my phone just keeps restarting and restarting and staying on the logo.
Thanks in advance for your time spent on reading my problem i just wanna use my phone again cuz i love it. <3
Hi, try to flash latest stock firmware for SD update here is example but do for your model and region !!!
http://huawei-firmware.com/rom/huawei-y5ii/cunu29/1719
Good Luck
Thanks you, but i would do that if i had access to my recovery!
If i press the keys my phone just restarts and restarts until i let the keys off, then again... just the logo.
my phone still is in warranty and i can give it to my distributor so their service fixes it.... but i dont really want that.. i just wanna fix it and use it as before.
well..
i had my phone to service and i got it fixed for 100 bucks. :/ i really am a sadman

Phone Brick Help

Hello,
I just received my brand new Samsung Galaxy A40 (SM-A405FN) and I wanted to root it / install Custom Rom before anything else.
So I downloaded TWRP 3.4.0 for my phone and tryed flashing it. But that did not work, I was stuck in download mode. So I decided to reflash original firmware. During the flash, Odin stuck itself at "Boot" operation during more than 15min, so I decided to reboot the phone to retry (what a big mistake...).
And now, I can't access Bootloader mode anymore, I only have a blue screen with "An error has occured while updating the device software. Use Emergency Recovery function in smart switch PC software".
I downloaded Smart Switch and tried the emergency recovery, but no devices appears in the list. Same thing with Kies...
I'm lost, please tell me I did not completely brick my brand new phone :crying: ...
Thank's for help and sorry for bad english...
EDIT: Ok, the phone is not dead ! I finally got the download mode back with the correct timing for key strokes!
Can someone tell me why I can't boot after flashing this TWRP: https://twrp.me/samsung/samsunggalaxya40.html ?
I saw this post which tells to flash Kernel & VBMeta with the recovery but Odin can't flash .img files: https://forum.xda-developers.com/galaxy-a40/development/recovery-twrp-galaxy-a40-t4025587
solved?
Brick Problem solved yes, I still have not manage to install TWRP but at least I have been able to re-install stock firmware. Maybe I should do another thread for that problem
maybe you can try to enter the forum according to the device you are using.

Hardbricked my A10, what to do?

A few months ago, I successfully rooted my SM-A105FN/DS with Magisk and Odin. I remember I had TWRP on there, but I think I flashed my phone again, therefore causing my phone to lose TWRP. I recently decided to install the TWRP recovery again, yet I installed the wrong recovery, and after flashing with Flashify and rebooting, I was met with a boot loop. I only saw the Samsung logo with the official software warning and bootloader unlock warning. This would restart constantly until I plugged in my phone, to be met with the logo stuck on the screen. I cannot enter adb, fastboot, Odin mode or recovery mode. My PC doesn't recognise it. I spoke to some Samsung support people online, and they hand no clue whatsoever. I don't want to pay for a repair (I doubt they'd repair it anyways because I have bricked it with a rom and have rooted it). Is it possible to fix it with software, and if not, how can I, and is it possible to replace it with the motherboard of another A10?
you solved that?
i have the same problem, this situation is very nerve wrecking. anyone got a fix on this one?
You cold try to wait until the battety get flat,then you hold vol + and - buttouns then plug into a computer,you should see the download mode
can you open the fastboot mode with volume down + power? it may enables the odin again

Categories

Resources