Related
FIRST OF ALL.. ALL CREDIT GOES TO MYCRICKETFORUM. One of the best tutorials I have ever seen, especially for beginners.
Full Flash Sprint HTC Evo 3D to Cricket: Talk, Text, MMS, Internet
This is a revolutionary phone and hopefully some we see some of it's technology in other phones.
At this moment there is no 4G with Cricket. They have already made moves to establish a partnership and have an LTE network. It has been rumored that Sprint is even trying to move away from the Clear 4g network (WiMAX). This means that you will have no 4G service when you flash this phone. I believe the radio gets it's authentication by MAC address so it might be possible to put this on a Clear account. One of my customers said he was able to do this with his Epic that I flashed. He was also a Clear reseller.
Until we get permanent root, this tutorial will just cover putting the device on the $55 Android plan.
Let it be known that sometimes Cricket says they have put you on the $55 Android plan, but they put you on the All in 55 Plan (5m5). This is not where you want to be. You're paying 10 more bucks a month for absolutely nothing over the 45 dollar plan.
We offer plan change for free to forum members. Just use the contact us link at the very bottom of this page. Supporting members of the forum receive additional benefits such as free ESN changes on your account. No more paying $15 everytime you change phones. To become a Supporting Member, just go to the settings up top and find Paid Subscriptions on the left hand side. Choose a membership level of your liking. Also use the contact us form for any modifications you need made to your account or additional help.
Anyways moving right along. We'll establish the items that you will need. This is usually similar across the board.
NOTE: At the very end we'll include some wireless tethering instructions.
A. QPST (QPST Version 2.7 Build 355)
http://www.mycricketforum.com/flash...amming/5372-qpst-version-2-7-build-355-a.html
B. HTC Diagnostic drivers for the Evo (attached on this thread [32 and 64 bit])
C A Windows PC with either Win7, XP or Vista plus your Evo 3D with a USB cord.
D. PRL (*STICKY* Official Cricket PRL Thread)
http://www.mycricketforum.com/flash...041-*sticky*-official-cricket-prl-thread.html
E. CDMA workshop (google) OR CDMA Workshop 2.7 Download) to get the MSL (aka SPC) if you don't know it already. Alternative would be MSL reader from the Market or attached below.
http://www.mycricketforum.com/flashing-tools-files-programming/44-cdma-workshop-2-7-download.html
F. OPTIONAL: Android SDK which includes ADB drivers. (Android SDK | Android Developers)
http://developer.android.com/sdk/index.html
Please watch the videos and use the tutorial here. It helps to use both.
VIDEO #1: http://www.youtube.com/watch?v=TnFBkaIP7MI&feature=player_embedded#at=694
VIDEO #2: http://www.youtube.com/watch?v=6NpavnahHYs&feature=related
SPC/MSL Obtaining
Skip through all these screens on the EVO 3D until you are at the home screen. Go into the phone dialer and hit ##3424#. You might have to hit talk after this. It'll cause the phone to go into DIAG mode. You'll see the device on your computer. Use the diagnostic drivers (specify their specific location) to complete the install.
Now you can find your MSL using CDMA Workshop.
For CDMA Workshop, the port number has to be fairly low. I think we're talking about under 30. You'll see when you start it though. Look at your device manager to figure out the port that it's on. Select that port and then hit connect. Go over to the security tab and for SPC hit read. It'll give you your MSL/SPC. The best thing to do here is to use the SPC button then SEND command to send this number back to the phone and unlock it. Then type in 000000 or some number that's easy to remember. Hit the SPC button and WRITE. Now the MSL/SPC is 000000 or whatever you typed. This is all you need to do with CDMA Workshop.
Programming
This is the point where you will be using QPST. Use this tutorial to setup the EVO correctly. Note that the mobile IP behavior must be Simp or you will get errors on your Evo from time to time.
Ignore any NV read errors you get when writing to the phone.
( http://www.mycricketforum.com/flash...-*sticky*-qpst-tutorial-pictures-cricket.html)
Once you get done with this part, talk and text will work. If you are on the $55 Android the Internet should work. However...
Working with new devices (never activated)
If you watched the video, between part 1 and 2 we have a little change in plan here. This was due to the fact that our device was brand new and never activated. The hands free activation kept on popping up, and we don't believe the device had accepted all of the programming at that time. Our hunt led is to Sprint's website.
Dial ##(and your SPC, we set it to 000000)#. This will open up the EPST menu. Click edit mode. Put in the proper Mobile Directory number (your phone number) and the MSID (your MIN). Hit the menu button and then select commit modifications. The phone will reboot.
Once the phone has rebooted, go to the dialer again and hit ##data#. Click edit mode and enter your SPC for access. Make sure the settings look like it does below:
Active Profile: 1
User Name: [email protected] (put your phone number in this)
Reverse Tunnel Preferred: Enable
Home IP Address: 0.0.0.0
Primary Home Agent: 0.0.0.0
Second Home Agent: 0.0.0.0
HA Shared Secret: cricket
AAA Shared Secret: cricket
You can try hitting menu and commit modifications, but it will most likely tell you there were no changes made. Back out, go to advanced and then continue with the multimedia streaming setup below.
Media Streaming
Youtube videos might not play unless you modify some settings. Sprint by default routes media through their servers. To change this dial ##data# from the dialer on the Evo. You will get to the EPST settings. Click edit and then enter the MSL. It will prompt you for a password which is the MSL aka SPC.
Once you get past that, go to advanced > RTSP Proxy Address (for stock Gingerbread it's advanced > RTSP/HTTP Setting > RTSP Proxy Port). Make this 0.0.0.0. Also make the HTTP PD Proxy Address 0.0.0.0. Also change the ports for both of these to 0. Back out and you should be good.
MMS
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="310012" mcc="310" mnc="012" apn="1" user="your10digit#[email protected]" server="wap.mycricket.com" password="cricket" proxy="null" port="null" mmsproxy="null" mmsport="8080" mmsprotocol="2.0" mmsc="http://mms.mycricket.com/servlets/mms" type="mms" />
</apns>
Just edit the "your10digit#here" part with your phone number and save this.
Place it on your phone's SDCard under a folder called "apnbackuprestore". Then open the Android App APN Backup and Restore (included in this thread and on the Market) on your Evo. Backup the stock settings. Then delete APNs and restore the new APNs you just created.
You should have everything working now. Talk, text, MMS, and Internet. There are a few more steps left to enhance the experience. Below is my attempt to fix a step that I left out.
YOU HAVE COMPLETE THE FULL FLASHING TO CRICKET. ENJOY!
Issues:
TEXT: It is possible that your text messages will come in with the wrong time. If this is the case, you can download SMS Time Fix from the Market and set it up however you prefer.
HTC DIAG DRIVERS:
http://www.mycricketforum.com/attac...ket-talk-text-mms-internet-htcdiagdrivers.zip
APNBACKUPRESTORE:
http://www.mycricketforum.com/attac...t-talk-text-mms-internet-apnbackuprestore.apk
although this is helpful i am moving mine to boost but i get WS to scan any readable addresses ? please advise thanks
I see no contact us link at the bottom of your post. Also who are you affiliated with/ business. Just wondering I saw "We offer plan change free to forum members" Thanks
EDIT: Thanks. I also fixed the grammar around the first statement. Someone suggested a change in the original wording... I modified part of the sentence and forgot to look at the rest.
ta!
Thanks for this, I will be using it to flash a 3d later. I'm also going to join the other forum to check some info on a few other phones I'm flashing.
I'll let you know if anything comes up.
A question as well, I know that with the Evo 4g Sprint removed the stock voicemail notification service as they used their "visual" voicemail app, is the Evo 3d set up the same way?
Unfortunately the Evo 3D is also. You can try Voicemail Notifier (extorian) and see if that works. I posted a download in my forum.
For some reason they removed it from the Market. Maybe it won't work. Not sure. I've forwarded my voicemail to Google Voice so I have a type of Visual Voicemail now.
When I flashed my OG evo over to cricket, sometimes the stock browser and dolphin did not work. When this happened, I used opera..only when cricket services for data where not working with them and always connected. So if you cricket guys get these same type of random not working..have it loaded on your phone as a backup browser.
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
No4g4Me said:
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
Click to expand...
Click to collapse
Most likely yes they will look at both as voiding the warranty. Technically any modification done on the phone will void the warranty.
how do i get the free plan change???
can i get my phone put on 55 android plan plz have no 3g on my phlashed phone its a sprint evo 3d to cricket
dial ##786#, then press menu and then reset it will reset the whole phone also will restore your msl
Spc problem
Im trying to get my evo 3d spc, but the method this guys is using in the video is not working. Im using 01f2030f5f678ff9 as password and is telling me "Password is correct Phone is unlocked. But it doesnt show me any spc on spc box.
Can anybody tell me how?
Alright as much as I love a poll on a tutorial I made that originally didn't include a source, here's the entire forum on flashing the 3d.
http://www.cricketusers.com/sprint-htc-evo-3d/
I don't know why you are sending anything to get the spc. All you have to do is connect and then read the spc from the security tab.
im doing that but nothing happend it doesnt show me the spc. im using radio 2.17... Radio matter in this case?
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
chrisngrod said:
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
Click to expand...
Click to collapse
Danmm Dude thanks a lot you save my day.
Does anyone know how you can get it to work on the 25 or 35 dollar plan? I think the 25dollar plan would be better because I only need 300 minutes.
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
powduh09 said:
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
Click to expand...
Click to collapse
Can anyone answer this?
Also is getting the 25/35 dollar plan just a scam? No one wants to answer questions about it.
Is it possible to add a GSM or WCDMA options into a rom? I ported the VZW HTC Thunderbolt rom to HD2 (yah i'm crazy) but if I go into *#*#INFO#*#* , there are only LTE, CDMA, etc options and I don't get any signal. Replacing the Phone or Phoneprovider from another rom doesn't help.
Could a possible solution be to manually disassemble the phoneprovider apk and then add the extra options into it?
anyone?
.
Philip Mangelow's "Network" app allows you to switch to GSM (it really just lets you access a device menu). I don't know whether that would be enough, especially because the changes don't seem to persist over a system restart.
I have already tried that app, and it does give me any extra options, unfortunately..
Saw a post where they were using bluetooth headset and calculator as a dialer!
I was encouraged to add some details to this post by GODZSON, so here goes!
The credit for putting this together goes to crmcsh01, He's going to post a walk-thru soon.
I'm using contradude's CleverNameHere ROM on the Cricket network android plan.
Cricket is cheap and they don't care about your hardware.
Using DialerOne app I get full cell phone OTA ( MDN, NAM, PRL and commit) with *22804
Using Universal CKT MMS (the black app), I've got full messaging over the cell net.
Groove IP and Google voice provides voip on the data net. Works fine.
Cell phone function is almost complete, just some audio issues, the posts below give some good ideas for fixes and toys.
Support EVO VIEW as Phone!
http://androidforums.com/htc-evo-view-4g/419743-evo-view-phone.html
[Q] HTC Evo View phone?
http://forum.xda-developers.com/showthread.php?t=1270810
Cheap stylus
Fujitsu Stylus – FPCPN36AP
http://forum.xda-developers.com/showthread.php?t=1122541
http://www.buy.com/pr/product.aspx?sku=222543014
I haven't cooked a ROM since my touchpro2, but I think there is a very good chance the android pros out there can figure out the phone details. Also hardware buttons could be remaped (camera?) like in the old winmobil. I'd like my toy to have all the bells & whistles!
Evo View Bluetooth Cricket Walkthrough
TUTORIAL COMPILED BY crmcsh01
Evo View Tutorial
Hey I'm having a blast with my new toy, tried all 3 roms and clevername seems to be the one I like the most. Anyways if you want to copy and paste this tutorial go ahead, I made a few tweeks to it but for the most part it is complete, I did say it's not 100% and would appreciate input from the community.
HTC EVO View 4g on Cricket:
CREDIT FOR THIS TUTORIAL IS AS FOLLOWS:
Google and the Open Handset Alliance (Android OS), MyCricket Forum, XDA-Developers, contradude (ROM), AlphaRev and unrevoked (Revolutionary: S-off & Recovery Tool)
If I missed anyone, let me know. If you want me to link to any website I will.
I take no credit for the information provided; I simply compiled a set of instructions that worked for me.
This tablet was surprisingly easy to get onto Cricket’s network and I am able to use almost every feature, the only part not working is incoming calls. Google Voice works for incoming and outgoing calls though, so I thought I would give a walkthrough of what I did to get this tablet working on Cricket’s network. Keep in mind that this is not 100% complete yet, I would really appreciate input from the community to better this tutorial.
Prerequisites:
- CDMA Workshop paid version and QPST. You can probably get this done without Workshop but Workshop makes it MUCH easier.
- A rooted HTC Evo View, (I used CleverNameHere Rom RLS1) by contradude, I have not had time to play with honeycomb yet.
- Put your Evo View’s MEID on Cricket’s network on the $55 android plan, make sure it is NOT on your account as a (CPE) or your data will not work.
Instructions:
1. Open up your calculator app and put the tablet into landscape mode type !!3424! =, this will put your tablet into debug mode.
2. Open up CDMA workshop and connect to the proper com port.
3. Under the security tab, read the spc using “HTC Method” and write it to 0’s.
4. Under NAM tab, put your “MIN” “MDN” and “HomeSID” in the appropriate columns.
5. Under the EVDO tab put [email protected] in all 4 columns and “cricket” (NO quotes) for your passwords. Change Mobile IP Behavior to MobIPandSimple.
6. Under the PRL Tab, write Cricket’s android prl to the tablet. I use 42700
7. Do a mode reset and when it boots up you should get a “3g” icon and data should work.
8. If you keep getting a handsfree activation prompt:
a. Connect phone to QPST v2.7 build 323
UNDER M.IP TAB, delete all user profiles except 0 and 1, you should be able to double click users 0 and 1 and edit the profile
User [email protected]
HA and AAA shared secret > Text String > cricket
Do the same for both profiles
Change Active User - 1
UNDER PPP CONFIG TAB
> Um
Input [email protected] in Tethered NAI and User ID
Password > cricket
>AN
Input [email protected] in User ID
Password > cricket
9. Using root explorer or root browser, edit the build.prop file under /system/build.prop and edit the following line:
ro.phone.function=0 change the 0 to a 1 and you should have your phone enabled.
10. There are a couple ways to setup mms messaging. The way I used was to install APNbackup and Restore
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="310012" mcc="310" mnc="012" apn="1" user="your10digit#[email protected]" server="wap.mycricket.com" password="cricket" proxy="null" port="null" mmsproxy="null" mmsport="8080" mmsprotocol="2.0" mmsc="http://mms.mycricket.com/servlets/mms" type="mms" />
</apns>
Just edit the "your10digit#here" part with your phone number and save this.
Place it on your phone's SDCard under a folder called "apnbackuprestore". Then open the Android App APN Backup and Restore (on the Market). Backup the stock settings. Then delete APNs and restore the new APNs you just created.
11. To get youtube to work, dial !!3282!= from the calculator. Click edit and then enter the MSL. It will prompt you for a password which is the MSL or SPC.
Choose Advanced and at the bottom pick RTSP\HTTP Setting:
Change RTSP Proxy Address to: 0.0.0.0
Change RTSP Proxy Port to: 0
Change HTTP PD Proxy Address to: 0.0.0.0
Change HTTP PD Proxy Port to: 0
12. For a dialer there are a couple options I have found, If using HTC Sense, I had to install a dialer app from the market, dialerone worked for me, you might need to run the apk from a fileexplorer as I am not sure if the market will give you a result since you are using a tablet. If I put launcherpro on this tablet and use launcher pro, I have the actual HTC Dialer on my home screen no problem. If you make a test call with it, you can dial *228 send and your tablet will program over the air. If you call out using cricket service, you will need to use Bluetooth in order to hear anything, but if you use groveip and google voice, it will automatically go to a fully functioning speaker phone when you place a call.
huntman21014 said:
care to give some more info on how you flashed it to cricket and data costs?
Click to expand...
Click to collapse
see post #2 thanks to crmcsh01
HTC EVO View 4g on Cricket
Didn't have enough posts to include links, so dtack posted for me, any question just ask!
Thread cleaned
Thread had been cleaned up for development, Thanks to dtack and crmcsh01 for info.. edit current posts with updates
P.s. For dev info the Jet Stream modded with phone service.
as for the instructions, do these instructions work on sprint? Just use sprint prl, instead of the password being cricket itll be sprint?
I really want this work... id rather use this than my evo 3d
I just spent about an hour going over my evo 3d build.prop and the buil.prop for the view 4g (viperrom) and I added any values from the evo 3d build.prop that wernt in the viperrom (view) build.prop. I adjusted a few things too.
anyone want to give this a try on the sprint network and see if it gets us any further on getting the view working on the sprint network for calls?
here is the build prop I modified
http://www.multiupload.com/O6Y4ODVDJY
I am sure the view would work as a phone on Sprint. I think the biggest issue you will run into is getting sprint to activate or put your view's MEID/ESN onto an account the same way they would put an Evo 3d on. If you try to activate it as a phone, they will see it as a tablet in their system and probably not do it. Cricket was pretty easy because as far as they were concerned it was just another ESN to put on an account, as far as they know, it is an EVO 3d.
it is possible to change the meid number
im just saying it "can" be done. Im not saying do it lol
Changing MEID on instrument is illegal (I think so). If you change MEID on your handset, then you need to get this MEID registered on Sprint.
dtack, you asked to enable the phone function in build.prop. Would this enable the bluetooth headset to work with VIEW or should we do some more tweaking?
I have tried enabling the bluetooth in build.prop (two properties mentioned for flyer gsm) and tried connecting to PC (PC as a bluetooth headset), left out with unluck. It could connect the media audio but not the phone.
pls help us on this.
-KP
kevinrocksman said:
I really want this work... id rather use this than my evo 3d
I just spent about an hour going over my evo 3d build.prop and the buil.prop for the view 4g (viperrom) and I added any values from the evo 3d build.prop that wernt in the viperrom (view) build.prop. I adjusted a few things too.
anyone want to give this a try on the sprint network and see if it gets us any further on getting the view working on the sprint network for calls?
here is the build prop I modified
http://www.multiupload.com/O6Y4ODVDJY
Click to expand...
Click to collapse
I think your on the right track...but using build.props and decompiled rom apks from HTC phones with the same processor (Snapdragon MSM8655) and stock carrier might be more compatible.
HTC EVO Design 4G a Sprint phone
http://pdadb.net/index.php?m=specs&id=2861&view=1&c=htc_evo_design_4g__acquire_htc_kingdom
HTC Hero S
http://pdadb.net/index.php?m=specs&id=3165&view=1&c=htc_hero_s_htc_kingdom
Verizon HTC ThunderBolt 4G
http://pdadb.net/index.php?m=specs&id=2657&view=1&c=verizon_htc_thunderbolt_4g_adr6400_htc_mecha
It's interesting that ALL the phones including the View are specd with FM radios!
Sprint HTC EVO View 4G Specs
http://pdadb.net/index.php?m=specs&id=2830&view=1&c=sprint_htc_evo_view_4g
By the looks of it the only phone that uses that specific processor and works on Sprint is the Samsung Conquer 4G. I will see what i can do with decompiling it... That is something I'm only 2% good at...lol
Sent from my PG86100 using XDA App
Thanks crmcsh01 , dtack and kevinrocksman.
I used the RUU by globatron and used just the ro.phone.function, bluetooth related props then CDMA service parameters for our operator in India. It connected to CDMA network in India.
When I updated with HoneyComb by gloabtron, and changed the phone.function alone, I am getting dialer enabled from DialerOne. But I am getting Yellow background image with text "Wrong!" underneath the contacts icon and underneath the history icon which are beside the "End Call" button (same as my old old condition before successful phone app) . Bluetooth is not connecting to Phone audio, but connecting to media audio. Could you help us how to get this enabled on HC.
For timebeing I rolled back to GB by globatron and my phone is enabled again with no problems.
Any help with Honeycomb is appreciated.
-KP
krishnaprasad said:
Thanks crmcsh01 , dtack and kevinrocksman.
I used the RUU by globatron and used just the ro.phone.function, bluetooth related props then CDMA service parameters for our operator in India. It connected to CDMA network in India.
When I updated with HoneyComb by gloabtron, and changed the phone.function alone, I am getting dialer enabled from DialerOne. But I am getting Yellow background image with text "Wrong!" underneath the contacts icon and underneath the history icon which are beside the "End Call" button (same as my old old condition before successful phone app) . Bluetooth is not connecting to Phone audio, but connecting to media audio. Could you help us how to get this enabled on HC.
For timebeing I rolled back to GB by globatron and my phone is enabled again with no problems.
Any help with Honeycomb is appreciated.
-KP
Click to expand...
Click to collapse
you say it connected in india?
and the phone functions worked on GB?
Could you make calls and recieve calls?
Txts worked?
Did you have to use grooveip and google talk or did it just work with sprint?
also what if you installed (or pushed) http://www.multiupload.com/SZFSA47UQH
its the phone.apk from my evo 3d..
I am in India. like Sprint, we have CDMA Operators called Reliance/Tata/MTS.
As quoted by crmcsh01 I need to get the MEID enrolled on it. For time being I have mapped the parameters for India Operator Reliance. Only calls I can make is to *333 and *228. I called these numbers on GB and heard the activation instructions. It worked connecting these numbers. Once I get the plan enabled on these would post the results (might take a week or two for this) for Txts and Receiving calls.
I didn't used GrooveIP to connect the CDMA Operator. When I used GrooveIP to call US numbers, it worked as well.
Do you mean installing the phone.apk on HC? Phone app got enabled on my HC. But problem is I didn't hear any voice on my bluetooth that I heard when it was GB when I called *228. So I rolled it back to GB. I see a yellow colored "Wrong!" text on both sides of the "End Call" button during this call in HC along with no sound in bluetooth as well as speaker.
GB is the one i'd perfer to be functional first. don't like HC so much lol.
if I'm correct thee apk I posted is the GB one.
Pls find attached the snap shot of Phone App I am getting in HC. pls see the yellowish background in the bottom left and right sides. I will check the GB one for messages and post the results.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
krishnaprasad said:
Pls find attached the snap shot of Phone App I am getting in HC. pls see the yellowish background in the bottom left and right sides. I will check the GB one for messages and post the results.
View attachment 845047
Click to expand...
Click to collapse
so it did this after u upgraded to HC then back to GB?
krishnaprasad said:
I am in India. like Sprint, we have CDMA Operators called Reliance/Tata/MTS.
As quoted by crmcsh01 I need to get the MEID enrolled on it. For time being I have mapped the parameters for India Operator Reliance. Only calls I can make is to *333 and *228. I called these numbers on GB and heard the activation instructions. It worked connecting these numbers. Once I get the plan enabled on these would post the results (might take a week or two for this) for Txts and Receiving calls.
I didn't used GrooveIP to connect the CDMA Operator. When I used GrooveIP to call US numbers, it worked as well.
Do you mean installing the phone.apk on HC? Phone app got enabled on my HC. But problem is I didn't hear any voice on my bluetooth that I heard when it was GB when I called *228. So I rolled it back to GB. I see a yellow colored "Wrong!" text on both sides of the "End Call" button during this call in HC along with no sound in bluetooth as well as speaker.
Click to expand...
Click to collapse
Good work!
Could you post a copy of your build.prop?
Also a list of all your settings under the EPST ( !!3282! in landscape calc mode ) would be great.
To OTA with my carrier here in the states the spc needs to be zeroed out.
Try to verify which phone apk is being used.
Thanks!
After using globatron's GB RUU, I went to build.prop (after SU flash, RE), then changed below properties as mentioned in #2 post in this thread (by crmcsh01/dtack)
ro.phone.function=1
ro.bt.profiles = 4270403
service.brcm.bt.ag_supported = 1
Initially I saw the HTC Phone app. After second boot, this icon got disappeared. But I could call the numbers using the "People" app. I have created the contacts for activation and then used "People" app to call the number required.
If we don't enable the ro.phone.function, then "call" is disappearing from the "People" application against the contact (only SMS remains)
I didn't change the EPST values other than using CDMA WS and changing SPC/MSL to 000000, MCC (Country code) to 404 and our primary and secondary A/B values to match the operator. Once I get the connection I will change these to the needed.
Pls find attached build.prop that is working for my GB as phone (Not yet tested Receiving Calls and Txts. Expecting connection to get in 10 days ).
View attachment build.prop.txt
Hello XDA... I have a question, I got a HTC evo 3d sprint but programmed in Iusacell (Mexico), follow the tutorial steps of another forum, initially had trouble activating the 3G. I checked settings and data entry fields in QPST and I could fix it, Now I'm able to activate mobile data in my Evo 3d
Now the problem I could not solve is the Message issue. I want to send a msg to X number, but it appears an error message like this:
"Insufficient resources radio interface"
Anyone know why??
at first I thought it was PRL problem. I changed many of them but it sends me the same message and also marked roaming.
Currently I have:
Rom: MeanRom ICS
Hboot: 1.58 S-off
unlocked bootloader
PRL: 350
I hope you can help me to solve this problem. =)
Just last week I was able to access #*#*4636*#*# on the dialer but now it keeps saying " Connection Problem or invalid MMI Code" I am not sure if I deleted anything,but I don't normally touch anything besides flashing Vanilla rootbox updates whenever it has a new build.
I am also trying to access 38456#*970# on the dialer and same results. I went back to stock rom and same thing as well. How can I resolve this? Does it have anything to do with the radio from Mako? Because thats what I have on my device. Radio from Nexus 4.
Z33type said:
Just last week I was able to access #*#*4636*#*# on the dialer but now it keeps saying " Connection Problem or invalid MMI Code" I am not sure if I deleted anything,but I don't normally touch anything besides flashing Vanilla rootbox updates whenever it has a new build.
I am also trying to access 38456#*970# on the dialer and same results. I went back to stock rom and same thing as well. How can I resolve this? Does it have anything to do with the radio from Mako? Because thats what I have on my device. Radio from Nexus 4.
Click to expand...
Click to collapse
On the previous thread where we were talking, I said dial 3845#*970#. That's how I get to the hidden menu. I'm using AT&T stock firmware 4.1.2, build JZO54K, software version E97020j. I have the unlocked AT&T E970 model. If your model has a slightly different number, then you dial 3845#*XXX#, where the three numerical digits of your model number is where the three XXXs are.
I'm using BuildProp Editor in the play store to make the changes to enable the "Network Mode" setting in the mobile networks part of the menu.
Show me how to do that on the build.prop and I tried looking for the ro.radio and doesn't seem to show up on anywhere I don't know if its my phone being dumb but I'm getting tired of getting 3g and h+ I'm also sick of my friends getting LTE h+ living in the same area as me.
Sent from my Optimus G using xda app-developers app
OK the dialer still does not work. I'm about to lose faith
Sent from my Optimus G using xda app-developers app