Hi all,
I have Galaxy SII with android Gingerbread.Until recently my phone was being detected by my system .But few days back I unplugged the phone from another system after transferring data ,without safely removing it.
Since my phone shows USB connected (MTP-connected) message along with the icon even when it is not connected.Also since then it is not being detected by my system and KIES shows connecting .When i opt for USB mass storage option ,it pops up a message"USB connected ,please remove the cable " .Same situation for USB debugging mode.
Please suggest as what to do .My last option is factory reset ,
Plug into wall charger let it charge for I min. Turn charger off at wall or unplug from wall wait few seconds 5 or 10 then remove usb cable from phone. If that dont work its looking like a new usb port which is cheap and easy to fit.
Sent from my GT-I9100 using xda app-developers app
Related
Hello,
I have a problem in my galaxy s2. the phone doesn't instantly detect when the charger gets connected or disconnected as usual.
the fully charged notification won't get cleared when I unplug the charger. it seems like it's still think the cable is connected. if I power off the phone, I get the battery charging animation screen and beside it the yellow triangle and a thermometer (the cable is not plugged).
Also when I plug in the charger it takes a lot of time to start charging and doesn't make a sound. as if the cable was already connected and it's just resuming.
In conclusion, for the past three days, the phone always think that the charger is plugged
Please help
Same thin here.... it sometimes thinks that it is on MTP mode and I can't put it in debbug mode.
nobody can help yet??
same thing goes to me too..
hope someone will help us~~~
If you searched the first answer would be clean USB ports and the second one factory reset .
That fails = service centre .
jje
I have an i777 (AT&T). I would like to root it. When you connect the micro USB cable, the phone starts to act strangely. First, you cannot charge the phone through the cable (I have to use an external charger and keep switching batteries). When you connect the cable, the phone does the following: every six seconds the black and white battery charging icon appears in the middle of the screen (the one that you see when the phone is off), and stays there for a split second. Then the screen is black until the battery icon appears again. The phone cannot be used while the cable is connected.
There are ways to send files to the phone (Kies Air) that let you work around the cable issue. But does anyone know how to fix this USB cable problem?
Thanks.
DO not charge your phone with it
Seems like your USB port is damaged and you can damage the internal parts by giving a fluctuating power supply
Hi. I have the same problem. Could you fix it? Charging and data transfer can be solved (external battery charger - airdroid) but I do not know how to root it. Is there any wireless way to root the device? Thanks
My phone didnt charging with USB anymore... 3 times ago i turned off the phone em plug USB and try to charge, it started the phone normally but no charging... And now, trying any method and any USB works
My usb was bricked??? There is a way to know about it?? Ah log or a app that shows if a hardware are working??
Or any solution???
is your computer recognizing the phone when you connect it ?
if it is and charging is not working means that the charging pins of usb might be broken
I think the inner pins of a usb cable are for charging , they might be damaged .
Try using another usb cable
Sent from my GT-S5670 using xda premium
I used any other usb cable in other phones it works, but in my phone didnt USB cable neither recharger works i think it is my phone
crying!!
Hi, my phone just charges when I connect to any PC, it doesn't detect it on the system and even on the phone. I tried to check and uncheck the usb debugging and the logo came back on the phone (but still nothing in the PC). And now whenever i plug it in the usb debug mode comes and when I try to use mass storage option it allows but PC dosnt respond in a matter of seconds it goes away. My friend had flashed my phone with the stock rom 4.2.1 from XDA itself last year sometime in november and after that it has been great. I believed it was a cable fault so I showed it to a repair shop where the guys checkd with their PC and a new cable and none of their PCs detected it, even the OTG cable they tried wasn't detected on the phone. They say its an error in the Jack which can be repaired in a couple of hours for Rs 250. I have no problem in doing that but I don't know if its a jack error or something inside my phone (some sort of setting) causing it. Please help
Hello all,
Honor 7,
PLK-UL00
B341 and EMUI 4.0
Android 6.0
Im unable to use my phone as USB Mass storage device. When i connect my phone to PC sometimes im getting as USB device not recognized and sometimes im not. I tried different PCs and different cables. ITs ONLY CHARGING
tried cleaning the micro usb port, uninstalling and reinstalling drivers in Pcs but it didnt work.
I switched off my phone, removed mem card, reinserted it, swithced it on again, connected my phone to PC(in sleep mode)
phone is detected as storage device and got notification in notification panel to select as charge only/files mode/ photos mode.
After ejecting and removing cable again back to issue. No detection. OTG also not detected. No Data transfers are being made but its only charging( even through Car USB port)
Anybody facing USB not recognised problem ? i hope its software related.
could anyone let me know of solution.
Thanks.
I am also facing the same issue
I thought I was alone in this issue.
Basically, my problem is, the wall charging and USB connect are reversed. i.e., I connect my wall charger, its showing as USB mode and when I connect the cable to a PC, its showing as AC Charging. I tested with Ampere app and when I connect to AC Charger, it is drawing only around 300mA(like it would do if connected to USB) and its drawing around 1.5A(like it would do when connected to wall charger) when connected to USB PC.
I have been having this issue for quite sometime and recently, I had upgraded to Marshmallow through OTA upgrade. I thought atleast this upgrade would fix this issue but I am still facing the same issue. I even contacted the customer care and nothing useful advice other than restoring to factory settings was suggested(which I tried and didn't work).
I guess it should be some software issue but don't know what it is or how to fix it. Any inputs would be welcome.