Hi, maybe this is not right place for such post, but for now until i have posted 8 messages I'm unable to post in other threads, i think so.
A few days ago i have moved from stock rooted rom to Renovate Final 3. The reason was simple - i need OTG cable working. I prefered this rom because the reviews and benchmarks was quite good (Quadrant 7000+ in comparison with 5000+ on old ROM). Also i like blue theme.
The roubles i noticed staight after installation. Wifi signal was very weak in comparison with previews ROM. I diggend inside advanced wifi settings and found opion "Best Wi-Fi performance" and switched it on. This helped but not so much.
Other troubles i faced with when I've set u PPTP vpn connection. It connecting without problems but doesn't work at all.
After this i've installed terminal emulator from the market ran ping yahoo.com . no problem. then i ran ping 127.0.0.1 - loss 100%
ping my wifi ip adress - the same issue - loss 100%. what it could be ? some kind of internal firewall that block my local icmp echo requests or what? I have twice full - formatted all partitions, full-wiped my One x, and reinstalled Renovate rom, but the issue still the same. I think something wrong with this kernel or rom? Does anyone faced the same problems? What suggestions will be?
Kind regards,
Greg
---------------------------------
ROM: REVOVATE Final 3
Device: HTC One X, S-on
HBOOT: 1.39.0000
Recovery: CWM 5.8.4.0
Android version: 4.1.1
HTC Sense version: 4+
Software number: RENOVATE Final 3
HTC SDK API Level: 4.63
Kernel version: 3.1.10-g03b5369 [email protected] #1 SMP PREEMPT
Baseband version: 5.1204.162.29
Build Number: 3.18.401.1 CL156838 release-keys
Renovate3 final
Still no news about how to fix problem with tcp ip?
Related
Only purpose of this thread it to find out how many users have wifi interruptions on CM 10.1 or 10.2 by Legacy Xperia. Many users have complained, also many of them don't have any problem with wifi. If you HAVE interruptions, please try newest builds with improved wifi first, if problem persists, then vote in the poll! Also if you have problems, please post:
- Device Info
- Security level of router you mostly use (WEP, WPA2 etc.)
- You can post build number of your device, too (found under battery,) - maybe not needed
Me: No wifi interruption
device: coconut, CM 10.1
security: WEP
build number: 11W51
Had WiFi interupptions: Yes.
Device: Mango, CM10.1 and CM10.2
Router: Netgear WNR3500v1
Security: Mixed WPA-PSK/WPA2-PSK (phone connects via WPA2)
Build Number: 11W34
Also I've always has the battery drain issue. I've built the rom from source on 0913 (CM10.1), at first I thought it's gone because it was okay, and then after a full charge and 2-3 hours later it's started to drain about 8%/hour. It's not a wakelock issue, but the wifi itself drains the battery, if I turn it off, everything is fine.
Had WiFi interuptions: No
Device: Coconut, CM 10.1 (Build 20130908)
Security: Mixed WPA2/WPA -PSK
Build number: 12W01
Had WiFi interupptions: No
Device: Coconut CM10.2
Router: Buffalo WZR-HP-AG300H
Security: NG-mixed 40Mhz WPA2 AES
Had WiFi interupptions: No (or not noticed).
Device: Mango, CM10.1
Router: Freebox/Neufbox (Home/Work)
Security: WPA-PSK
Build Number: JDQ39E (20130908)
Had WiFi interupptions: Yes.
Device: Smultron, CM10.1 and CM10.2
Router: EURODOCSIS 3.0 Wireless Modem (It's one from my provider called Telenet)
Security: WEP 64
Build Number: JDQ39E 20130822
Had WiFi interupptions: a lot...
Device: Coconout, CM10.2
Router: CBN CV6181E EMTA 3.0
Security: WPA/WPA2-PSK TKIP/AES
Build Number: JSS15Q (20130828)
Hubik82 said:
Had WiFi interupptions: a lot...
Device: Coconout, CM10.2
Router: CBN CV6181E EMTA 3.0
Security: WPA/WPA2-PSK TKIP/AES
Build Number: JSS15Q (20130828)
Click to expand...
Click to collapse
Yes me too observing alot of Wifi distruption in all ROMs even with different kernels
Thank you all for your replies, though unfortunately still not relation between them.
Strange thing. Probably too early to tell, but I've rebuilt and reinstalled the rom from todays source at about 3 hours ago and I didn't get any wifi interruptions since that. The only thing I've changed is that I've installed the latest (20130812) gapps. At earlier I've always installed the older 4.2.2 gapps (20130301).
I don't know if something's changed in the source code since 0913 (i didn't saw any wifi related commits on github since then) or the newest gapps changed something. Maybe I'm just lucky now, I will report later.
Battery drain is fine now though, but it's too early to tell, I didn't charge the phone fully since the install and I didn't installed every app.
Edit: Interruptions are gone, battery drain isn't
Yes, I have WiFi interruptions with xperia mini on CM 10.2
I have a cheap china clone of the Samsung S3 phone. It claims to be:
Model GT-i9300
Android version 4.1.1
BASEBAND VERSION - MAU1.11AMD.W11.50.SP.V12.2012/09/20 18:56
kernel3.0.13 - [email protected] #1 wed feb 27 14.44.52 cst 2013
build number - ALPS.ICS.MP.V2.6
CUSTOM BUILD 001130227
DEVELOPER DEVICE ID - JA56-JNR6-NEDN-C
Am not too sure about the Android version, maybe 4.0.3 and someone altered the build.prop to make the phone sell better. Phone came with a fake Antutu program to display fake results. Can anyone advise how to actually check the system for correct version?
It has an MTK6575 CPU(appears to be 1.2MHz), single micro-sim, with 540 by 960 display, front and rear cameras.
Came with many software problems, have managed to get the WiFi stable, however still some problems with the GPS chip, but eventually got YGPS to obtain a fix and give me a location – but very unreliable. Not managed to get any other software to work.
PROBLEM 1
However, when I use google Maps, it always want to install the Google Play Services, so that it has the V2. This always fails due to error "incompatible with other application(s) using the same shared user ID".
It seems to be complaining about Google Framework as this and play services both specify
<shared-user name="com.google.uid.shared" > - not found any other programs/system bits using shared ID's
could a poorly doctored build.prop be causing this?
Has anyone a solution to this problem?
PROBLEM 2
The other problem I have noticed is that MediaTek seem to have their own location services. In mobile tools, engineering mode, there is an option to use either Google or MediaTek. If I specify Google, it states that the goggle Netloc and Geocoder services’ Fail to bind’, but no problem with the MediaTek drivers? As MediaTek only divert their traffic to Google anyway, it would seem more sensible to bind with google direct.
Has anyone a solution to this problem?
stevet99uk said:
I have a cheap china clone of the Samsung S3 phone. It claims to be:
Model GT-i9300
Android version 4.1.1
BASEBAND VERSION - MAU1.11AMD.W11.50.SP.V12.2012/09/20 18:56
kernel3.0.13 - [email protected] #1 wed feb 27 14.44.52 cst 2013
build number - ALPS.ICS.MP.V2.6
CUSTOM BUILD 001130227
DEVELOPER DEVICE ID - JA56-JNR6-NEDN-C
Am not too sure about the Android version, maybe 4.0.3 and someone altered the build.prop to make the phone sell better. Phone came with a fake Antutu program to display fake results. Can anyone advise how to actually check the system for correct version?
It has an MTK6575 CPU(appears to be 1.2MHz), single micro-sim, with 540 by 960 display, front and rear cameras.
Came with many software problems, have managed to get the WiFi stable, however still some problems with the GPS chip, but eventually got YGPS to obtain a fix and give me a location – but very unreliable. Not managed to get any other software to work.
PROBLEM 1
However, when I use google Maps, it always want to install the Google Play Services, so that it has the V2. This always fails due to error "incompatible with other application(s) using the same shared user ID".
It seems to be complaining about Google Framework as this and play services both specify
<shared-user name="com.google.uid.shared" > - not found any other programs/system bits using shared ID's
could a poorly doctored build.prop be causing this?
Has anyone a solution to this problem?
PROBLEM 2
The other problem I have noticed is that MediaTek seem to have their own location services. In mobile tools, engineering mode, there is an option to use either Google or MediaTek. If I specify Google, it states that the goggle Netloc and Geocoder services’ Fail to bind’, but no problem with the MediaTek drivers? As MediaTek only divert their traffic to Google anyway, it would seem more sensible to bind with google direct.
Has anyone a solution to this problem?
Click to expand...
Click to collapse
the problem seems to be with the firmware and build search the net for a stock firmware for your phone if there is one and flash may be that helps
sangalaxy said:
the problem seems to be with the firmware and build search the net for a stock firmware for your phone if there is one and flash may be that helps
Click to expand...
Click to collapse
The problem with these 'unnamed' clones is that there isn't any stock firmware, you get only what it comes with. Usually this is 'defective' as they rush to sell the phones while there is still a demand for them, and never get the firmware working properly. So some advice if you are looking for a smartphone/tablet, ONLY BUY ONE WITH SOME SORT OF AFTER SALES SUPPORT! Check the forums and see what phones have stock ROMS that are being actively developed.
PROBLEM 3
The LocationManger never reports any 'NETWORK' location. Wrote software to check it, can get a location when I run this on a tablet with only a WiFi connection, but on this phone with both WiFi and Cell, no location provided.
Has anyone a solution to this problem?
Update
PROBLEM 1 - SOLVED
guessed that it was really ICS and not JB, so loaded gapps-ics-20120429-signed.zip with CMW
this got over the shared user ID problem.
However, lost the IMEI number when doing this, (maybe clearing dalvik, not looked into) so reinstated with the MTKDroidTools.
SO RECORD YOUR IMEI BEFORE applying update.
Now thinks it is dual sim version, but that doesn't seem to matter
Now using the new Google Location software, GPS fix from COLD within 2 mins.
so problems 2 and 3 seem immaterial now.
see this post for solution to fix problem 1 ... created by brother @praderj
http://forum.xda-developers.com/show...4&postcount=45
[q] Galaxy S4 China Clone mtk6576
Hi,
My friend bought S4 Mini Clone from China but it really doesnt seems to be close to S4. So I have few question about it, and maybe you will help me. Os is prepared to looks like Samsung TouchWiz but most of functions doesnt work, there is not even Google Play :]
OK. It has Militek MTK6576 chip. In about phone there is:
Device Name: GT-I9190
Model number GT-I9190
Android Version: 4.2.2
Baseband version: I9190XXUAMF5
Kernel version:
3.4.0-849021
[email protected]#1
thu jun 13 16:52:08 KST 2013
Build Version: JDQ39.I9190XXUAMF5
SeLinux state: Permissive
Secure boot status: Type Samsung
Cant turn it in download mode any way, but instead of this it turn "Factory Mode" where is menu "Version" and it says
BB Chip: MT6575
MS Board: GT-I9190
IMEI: 123445 ...
Kernel Version: 2.6.35.7
Android ver: 2.3.6
SW ver: MDK_v2.1_K18_en_201308271711_tp5206
1. I dont trust what it says on "about phone" . How to check Storage / memory / CPU ?
2. Is there a way to backup entire phone for recovery ?
3. How, and witch rom can be installed there ?
4. Is there a way for touchwiz to work on this phone ?
Hope some one will guide me for this
Best Regards
Fenix23
Hello, I'm new to the forum and am stumped. I consider I have skill using google and searching forums but I have not found any answers to my problem.
I have recently rooted my Verizon Samsung Galaxy Note 2 and installed CarbonROM. I tried a few Eclipse (Elemental X) right away and wasn't to thrilled about them until I came across Carbon.
I love Carbon and its features but now I have noticed my signal is terrible. It does not go over 2 bars, and only in 3g. I used to have 4g and minimum of 3 bars where ever I go (with the few exceptional places when hunting and traveling etc). My WiFi still works but Verizon network is slow.
I've read similar posts regarding APN, my phone shows no APNs.
Also radio updates but settings shows I have VRAMC3, thats the latest correct?
Other info
SCH-I605
Android Version 4.2.2
Baseband - I605VRAMC3
Kernel - 3.0.64- Trinity_Carbon-gf0b6c64
[email protected] #1
Thu Aug 1 01:09:20 MST 2013
CPU - ARMv7 Processor rev 0 (v71)
Memory - 1791 MB
Carbon version - CARBON-JB-v1.8
Build date - Thu Aug 1 00:26:00 MST 2013
Build Number - carbon-i605-userdebug 4.2.2 JDQ39E eng.pxld.20130801.002517 test-keys
Any help would be greatly appreciated!
A big thanks to this spectacular forum: many posts have helped me in solving some issues on Android devices.
Today I can't find a solution with the tether interface in my new XTOUCH X1, a chinese brand that have branches in EA. When I use the tether interface (WI-Fi or USB) my computer can connect to my smartphone, but the message limited connetivity has displayed. I can't surf in the net.
Report the following information:
Model: XTOUCH X1
Android Version: 4.2.1
Kernel: 3.4.5
Harware Version: V6-P3
Baseband: MOLY.WR8.W1248.MD.WG.MP.V7.P3
!! ROOTED !!
- I've tried to install Wifi Tether treve Mod and it fails on enabling MSS Clamping.
- I've also used other app for tethering but still not working.
- The DHCP server is working, beacuse the PC can get the IP Address.
Please help me!!!
Thanks!!!!!
Hello guys,
I need you help...
I have got a samsung GS II where I had installed a CM 9.1 stable rooted firmware, that was the best in battery saving, but recently I got issues with app force close, suddenly phone reboot so i decided to reinstall a stock ROM 4.1.2. , much more stable.
This original ROM suffer of a battery drain issue and also issues in managing internet connection (very slow when has to switch from 3g to 4g, lost of connection, slow speed compared to the CM 9.1 previously installed) . I have rooted it with framaroot; installed Clock work mode for flashing, backup and recovery needs; installed Disable Service app for disabling all services not needed and Kernel toolkit in order to change CPU governor.
I get some positive results, but compared with the previous CM 9.1, it's still another world.
So, I am here asking your precious help to find an optimized stable kernel for batter saving and internet optimization. I already searched in kernel section of GSII but I found only kernel for CM ROM or similar, not for stock ones...
My phone data are:
model code: GT-I9100
Android version: 4.1.2
Baseband version: I9100XXLS8
Kernel version: 3.0.31-889555 ([email protected]) (gcc version 4.4.3 (GCC)) #3 SMP PREEMPT thu jan 31 14:48 KST 2013
Build version: JZO54K.I9100XWLSD
Many thanks in advance for any help.
Regards
Fabiello
Use apolo 4.15b kernel (highly recommended) or chhapil's 8.45 personal dorimanx builds. They are currently the most used kernels for 4.1.2 roms. For extra speed, use a trim-capable kernel (like chhapil's dorimanx kernel) which will keep your phone nice and snappy!
gsstudios