Dear frieds.
I have noir a2, as like others i was intrested in rooting my noir a2. N i have place rooted method from somewhere. My phone was not sucessfuly root but . But unfortunately some problem arises. When i connected my phone to my pc it will start charging but not showing usb connected option. I turn my phone off. N press "off" "+volume" "-volume" at once and then in the appeared option i choose boot factory mode.
Then i connect it with my pc again then it will show the usb connected option. But after some time it again stop showing the usb connected option. But start charging my android.
Plz help in that.
Kamran shah
it seems like more of usb cable issue then a phone issue try using diffrent cable
Sent from my A2 using Tapatalk 2
Related
Hello guys
I am having various problem with Samsung Vibrant currently running stock froyo 2.2
Problems
1. It does not start using the power button. It only starts automatically when I plug in the wall charger or usb cable connected to PC/Laptop.
Before: It used to start using the power button but when i tried to go into recovery mode using the keys combo this problem occured.
2. Whenever I switch off (power off) the phone it restarts automatically. (when connected to wall charger or usb cable connected to PC/Laptop)
Before: It restarts everytime i swtich off even when its not connected to wall charger or usb cable connected to PC/Laptop.
3. When I connect it to PC/Laptop it always shows "USB NOT RECOGNIZED". I tried many diff drivers, diff pcs/laptops, 2 diff cables, diff connection modes in mobile.
It doesnt charge from one cable, so i thought the cable has gone bad and brought a new one. it charges from new one but does not connect and same problem happens.
4. I tried to root the phone using galaxysrooter becoz i cannot it to pc. GalaxySrooter installed succesfully but when i run it, it shows some error (somthing like "XXX you sdcard XXX ?" dont remember the error sorry).
Then I went to recovery mode to root but there is showed the Signing verification error becoz of 3e.
5. Whenever i disconnect it from wall charger or usb cable connected to PC/Laptop the battery charging icon still remains and still shows that it is charging.
6. Its locked on t-mobile (not an issue)
I searched many websites but cannot find a solution.
Can anyone please help me fix these issues ?
Can anyone please tell me how can I root this phone and install custom rom without connecting to PC. I cannot use superoneclick root but no pc connection, cannot root from recovery mode becoz of the Verification signing issue (3e).
please help
in this same forum section of Questions and Answers go to the top and it will say noob guide read through it atleast 5 or 6 times. once u understand. you can go to development section and download "toolbox" it should be a sticky actually so right on top and will say noob next to it. by the way i hope ur not offended by me using noob often to refer to guides but all honestly it will help you step by step understand and explain what u need to do to custom flash. please be patient. read carefully over and over. every step must be followed precisely. good luck. im a noob too but im learning very very slowly.
I already read that sticky, but i cannot find the answer .. because my phone is expereincing some problems and also my phone is not rooted.
Can I install (flash) stock 2.1 without connecting to PC and without rooting ? if yes then how ?
Ok bro here is what I think u should n definitely try this I believe that it will definitely give u a break through.
1) go to vibrant development forum n download tool box install it open connect ur phone and click on first option install drivers. That will solve automatically the driver issue.
If it doesn't work u should try to upgrade the ddrivers n stuff for ur pc/laptop as well. Give it a try n let me know how it goes. N check to see if u need to mount the usb or not and also to have usb debugging on or not the software tells u.
Sent from my SGH-T959 using XDA App
i have an anointing problem with my vibrant, i installed a rom for vibrant based on the captivate rom from the at&t, and i went back to a regular 2.2.1 vibrant rom, but now i get the at&t world phone logo every time i reboot my phone, i have try everything from odin it back to stock but still get the at&t logo, can anyone here help me please?
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
I am currently using MIUI 8 stable latest and when ever i try to connect to my pc it only start charging. I tried to changed charging pin too, usb cable, ports changing, resting my phone changing PC but nothing worked only its start charging currently using windows 7 it was connect once don't know how but then i flash twrp and my phone was in a bootloop then i flashed miui 8 again using fastboot mode as my phone was detected once by my pc and then as i instal new fastboot rom turned on usb debbuing then again my phone was not detecting by my pc pls help me out its not even showing ports or other devices in devices manager only charging tried mi pc suit also can any one pls help me out urgently.I connectd my redmi 3s with my pc it was successfully connected with my pc but my redmi note 3 is not connecting pls help me out as soon as possible
SEARCHED EVERY WHERE BUT NOTHING HELPED ME OUT PLS HELP ME
THANKU IN ADVANCE
I'm experiencing this too. I can't figure out this too.
Licensya123 said:
I'm experiencing this too. I can't figure out this too.
Click to expand...
Click to collapse
go to developer options, scroll down a bit and click "Default USB configuraton" and select file transfer.
I was installing software in my device by odin suddenly the cable is detach and my device nothing is happening in my device
only shows a black screen.
when i connect my device to pc it connect and disconnect automatically after 2 sec.
I install all usb software and preloaders still device is connecting and disconnecting.
I also use sp tool to download preloader nothing happen.
remove baterry insert battery.
change pc,laptop,usb cables. noting happen . can anybody help me ????:silly::silly: