Hi guys,
I was following this guide to upgrade my Sanei n10: http://forum.xda-developers.com/showthread.php?t=1821398
In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off.
Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
Thanks to all
---
Driver
idulkoan said:
instead of reflashing the rom, to get this device to boot you will probably have to reflash the sanei. This can be done with livesuit.
Click to expand...
Click to collapse
I can not find a driver that works ... Can you help me?
---
idulkoan said:
try these drivers:
Click to expand...
Click to collapse
Nothing... It doesn't work..
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
I have Skype, could you plz help me ?
Thanks in advance
Nrupesh
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
Hello,
I'm sorry for the time that has passed, I had to do ...
I'm back to grips with my Sanei N10 ... I also formatted the PC, but the drivers do not work!!
Thank you for your help!
---
idulkoan said:
What displays on the computer when you enter your sanei n10 into "flash mode" ? [When trying to flash it with livesuit]
Click to expand...
Click to collapse
the problem is that the pc don't recognizes the tablet.
when i plug in the usb cable, windows find a new device but don't install the drivers... I have tried with the file in the previous post but don't work...
I have a general device called "Android" without drivers...
then, livesuite or another software don't recognizes the tablet...
What I have to to?
up
hmm
---
Related
Can anyone please help me with this? I have HTC Sensation with CM10. This tablet without root is uselles...
Anyone?
How did you put CM10 on it without root?
post-mortem said:
How did you put CM10 on it without root?
Click to expand...
Click to collapse
Read carefully what I wrote.
I have HTC Sensation with cm10. Its my dailly driver.
Goclever R75 i bought becouse it was cheap But what is android without root? And I cant get any information about that on this tablet...
No one know how to do that?
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
is it function? no problems?
Yes this works. Ive done this 2 times
Hi! Can you please tell me how to instal drivers from that package?
If u dont know how 2 do that... Please do not root your device!
devgron said:
If u dont know how 2 do that... Please do not root your device!
Click to expand...
Click to collapse
Hi again, thanks for your concern but it's not my first time when a try to root a device. I have a sony x8 rooted and a rom on it but never needed to instal something like that to root so can you please tell me how do i get over that spep? Sorry for my english.
devgron said:
Okay
I have root
First U must turn on debuging mode and unknown sources.
then connect tablet to PC and install drivers from package in atachments.
Then double click on "ICS_Root_Unlocker.bat" and follow instructions!
Click to expand...
Click to collapse
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Kurjak78 said:
I just hoped I haven't bricked my R75
It all went as it should until I ran ICS_Root_Unlocker.bat. It kept reporting device not found and than tablet rebooted itself. Logo of ICS appeared but after that it went totally blank. I could still use ADB to access tablet. All adb options that I tried worked - get state, etc. So I tried adb reboot bootloader and after ICS logo I got red triangle with exclamation mark. As I don't have volume up/down as physical buttons I am stuck - I can not access Android system recovery menu. Hardware usb keyboard works - I can reboot with tablet with it, for example. If I connect tablet to PC it is not recognized anymore. Any idea on what to do?
Click to expand...
Click to collapse
Hi, I have same problem. Did you get fix for this??
zefer79 said:
Hi, I have same problem. Did you get fix for this??
Click to expand...
Click to collapse
No. Fortunately I was able to exchange it for the new one.
Kurjak78 said:
No. Fortunately I was able to exchange it for the new one.
Click to expand...
Click to collapse
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
orlairet conde
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
bugxyz said:
Hello.
Which version of the device do you have?
7500
or R75
Those seems to be the same but are different.
I have stock android version for both
for 7500 - original, unrooted ( from a Russian site - don't remember)
for R75 - original, rooted ( a dump created by me from my device when I have received it)
Both works, were tested by me on my R75.
The firmware of 7500 flashed on R75 works, but you won't be able to use the capacitive buttons (as I told you are different).
The flash option is very simple:
1. Copy two files on the root of the sd card
2. Insert the card in the card slot of the device.
3. The flashing process will continue automatically.
Just tell me which one you need and a place where to upload the needed firmware. I can do the upload this weekend.
Bye.
Click to expand...
Click to collapse
Kurjak78 said:
I have R75. It would be great if you could upload rooted version to sendspace. Thank you.
Click to expand...
Click to collapse
Hello!
This is the link for R75 rooted firmware.
http://www.sendspace.com/file/0fhask
I hope it helps you.
Bye.
WIFI not working and sensor keys bad workimg
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
xxxx
I hope it helps you.
Bye.
Click to expand...
Click to collapse
:/ after install to "bricked" goclever tab r75 android from link xxx provided by bugxyz android run. .. wifi not working and senzor keys are shifted please help me :/ sorry for my bad english i am czech and the screen is shifted
Hello.
If you have those problems it means that you have an goclever tab 7500 and not an R 75. I saw that some contries 7500 was sold as R 75.
I had the same problem as you when I have flashed my R 75 with 7500 firmware.
I will upload also the 7500's firmware and provide the link when it is uploaded.
I hope this will help you.
Ps: 7500 firmware is unrooted.
Bye.
Edit:
This is the link for GoClever tab 7500
http://www.sendspace.com/file/shrso4
Bye.
Sent from my LG-P990 using Tapatalk
thx
Thank you very much, it helped. how should I do to make me root it got broken again
declara kvide
bugxyz said:
Hello!
This is the link for R75 rooted firmware.
I hope it helps you.
Bye.
Click to expand...
Click to collapse
Bugxyz, you are a savior. Thank you.
Hello guys,
at first sorry for my bad english but reading is easier then writing english for me
Yesterday I rooted my P760 successfully and I installed the ported AOKP 4.2.2 and the PAC-Kernel (CPU1200/GPU384).
So good. After a time of configure my phone, I wanted to reboot into recovery. I click my Power-Button, then reboot and then into recovery.
Since this click my phone doesnt start.
No normal start, no recovery start. NOTHING!
At night my phone was hanging on charger, so battery seems to be full.
Please help me. WHAT CAN I DO?
Regards
Maik
BaLLi89 said:
Hello guys,
at first sorry for my bad english but reading is easier then writing english for me
Yesterday I rooted my P760 successfully and I installed the ported AOKP 4.2.2 and the PAC-Kernel (CPU1200/GPU384).
So good. After a time of configure my phone, I wanted to reboot into recovery. I click my Power-Button, then reboot and then into recovery.
Since this click my phone doesnt start.
No normal start, no recovery start. NOTHING!
At night my phone was hanging on charger, so battery seems to be full.
Please help me. WHAT CAN I DO?
Regards
Maik
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
anirion said:
Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
Click to expand...
Click to collapse
Hey, thx for your response.
But on my phone are no kind of reaction at the screen. So I can't use the "SW Upgrade"-Mode =/
So if I connect my phone without battery to my PC I hear the USB-Connect sound but the entry in device manager is flapping.
What can it be?
If your phone answer at usb connect when battery is down that is a good sign. Try install omap drivers and flash custom recovery mode again. After u will be able to flash your stock soft again
The OMAP driver are still installed. The entry in device manager appear and 1-2 seconds later it disappear.
Im using Win7 64bit - is this the problem of OMAP?
BaLLi89 said:
The OMAP driver are still installed. The entry in device manager appear and 1-2 seconds later it disappear.
Im using Win7 64bit - is this the problem of OMAP?
Click to expand...
Click to collapse
It shouldn't. Try on diffrent computer, I have problems with connecting my device on mine but on diffrent one it works quite well. I don't know why.
You can also try this and flash recovery: http://forum.xda-developers.com/showthread.php?t=2119090
I have tested connecting to PC at my wifes desktop. The same Problem.
The link you have posted seems to work. I can work an my phone over adb (fastboot). I have rewritten recovery but it doesnt start...
EDIT:
If I want to write the rom or format/erase any partition over fastboot, i get following error, that the partition does not exist
C:\Android>fastboot flash data aokp_p760_unofficial_Mar-19-13.zip
sending 'data' (147524 KB)...
OKAY [ 75.571s]
writing 'data'...
FAILED (remote: partition does not exist)
finished. total time: 75.581s
Click to expand...
Click to collapse
BaLLi89 said:
I have tested connecting to PC at my wifes desktop. The same Problem.
The link you have posted seems to work. I can work an my phone over adb (fastboot). I have rewritten recovery but it doesnt start...
EDIT:
If I want to write the rom or format/erase any partition over fastboot, i get following error, that the partition does not exist
Click to expand...
Click to collapse
Unfortunately it looks like the nand is defevtive/broken . There is nothing you can do.
So I have no chance to "repartition" my phone?
BaLLi89 said:
So I have no chance to "repartition" my phone?
Click to expand...
Click to collapse
It's most likely hardware problem. Send it for warranty repair, don't mention the bootloader or custom Rom .
That will I make. Anyway thank you so much for your help mate!
I hope i get a new phone
Beautiful evening!
Maik
hi,
i killed my lenovo p780 by mistake.
i was flashing a costume rom using sp flash tool and in the middle of the process i canceled it.
after the cancellation the phone wont power or boot, doesn't react to any key and only a red light appears when i connect the phone to a usb.
i tried everything, the sp flash tool and the computer don't recognize the phone or any costume driver, only unknown device appears and none process starts.
the only time when something happens is when i connect the phone when trying to flash it and then push the red button, when i do that some process starts but after a minute it gives 'enable dram failed' error.
please help me !!!
tselitsky said:
hi,
i killed my lenovo p780 by mistake.
i was flashing a costume rom using sp flash tool and in the middle of the process i canceled it.
after the cancellation the phone wont power or boot, doesn't react to any key and only a red light appears when i connect the phone to a usb.
i tried everything, the sp flash tool and the computer don't recognize the phone or any costume driver, only unknown device appears and none process starts.
the only time when something happens is when i connect the phone when trying to flash it and then push the red button, when i do that some process starts but after a minute it gives 'enable dram failed' error.
please help me !!!
Click to expand...
Click to collapse
Because the flashing was stoped, your phone, more precise your preloader is messed up!
You must reflash by reinstalling the drivers. The whole process must be done again.
Look and read in Q&A Section. You will find some tutorials there!
You are not alone! There was some others who made this mistake!
Good Luck!
stympy said:
Because the flashing was stoped, your phone, more precise your preloader is messed up!
You must reflash by reinstalling the drivers. The whole process must be done again.
Look and read in Q&A Section. You will find some tutorials there!
You are not alone! There was some others who made this mistake!
Good Luck!
Click to expand...
Click to collapse
thanks!
i tried any driver i could find but the computer doesnt recognize the device (unknown device), can you point me a little bit?
please please help me !
tselitsky said:
thanks!
i tried any driver i could find but the computer doesnt recognize the device (unknown device), can you point me a little bit?
Click to expand...
Click to collapse
please help me
tselitsky said:
please help me
Click to expand...
Click to collapse
Hi. Please tell me if you can do a teamviewer connection. Ill contact you tomorow.
Sent from my Lenovo P780
stympy said:
Hi. Please tell me if you can do a teamviewer connection. Ill contact you tomorow.
Sent from my Lenovo P780
Click to expand...
Click to collapse
My problem is same, can you help me too?
dhweast said:
My problem is same, can you help me too?
Click to expand...
Click to collapse
yes,
id: 614 803 994
pass: 36ag3z
Hi. @tselitsky
@dhweast
Wait to get home! Now i am at work!
I will PM you in 5 hours! I do not know what time line are you. I am living in Romania.
GMT +3 is my hour!
stympy said:
Hi. @tselitsky
@dhweast
Wait to get home! Now i am at work!
I will PM you in 5 hours! I do not know what time line are you. I am living in Romania.
GMT +3 is my hour!
Click to expand...
Click to collapse
hi, i am GMT+2
tselitsky said:
hi, i am GMT+2
Click to expand...
Click to collapse
i am here !
I have a Lenovo a2110 that suddenly only is recognized in apx mode.
It was running the stock rom.
Can somebody explain to me how I can access adb mode to do a recovery or how to get out off the apx mode ?
nobody who can explain to me how to get started with flashing a 9714 under apx ?
peter43 said:
nobody who can explain to me how to get started with flashing a 9714 under apx ?
Click to expand...
Click to collapse
Try this site: https://www.android-hilfe.de/forum/medion-lifetab-s9714-forum.902/
If you are not german use Google Chrome with translation.
Hope this will help you.
Just tell us if you solved your device problem.
Good Luck.
thank you, if I understand it well the boot-loader is erased from the device
How can this happen ?
it was working the last time it was shutdown.
Can somebody tell me where to find the boot-loader files for download ?
peter43 said:
thank you, if I understand it well the boot-loader is erased from the device
How can this happen ?
it was working the last time it was shutdown.
Can somebody tell me where to find the boot-loader files for download ?
Click to expand...
Click to collapse
I have one question:
1. Can you enter by any chance in recovery?
Since I don't own this device I ask.
stympy said:
I have one question:
1. Can you enter by any chance in recovery?
Since I don't own this device I ask.
Click to expand...
Click to collapse
No only apx mode
I found an nvflash recovery script for the lenovo a2109, i'am reading it is the same as the 2110 execpt the 9" screen.
Can somebody confirm I can use it ?
is it normal when stuck in apx-mode , that the charging led isn't working ?
peter43 said:
is it normal when stuck in apx-mode , that the charging led isn't working ?
Click to expand...
Click to collapse
Nope. It is not normal.
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Victor Oliveira said:
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Click to expand...
Click to collapse
Are you using SP Flash Tool on windows or linux?
I am using it on windows, but if necessary I can install Linux
Augustoandro said:
Are you using SP Flash Tool on windows or linux?
Click to expand...
Click to collapse
I am using it on windows, but if necessary I can install Linux
Victor Oliveira said:
I am using it on windows, but if necessary I can install Linux
Click to expand...
Click to collapse
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
Okay, I'll try and re-post the result here
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
So I took a look at this link, but there is no solution to this error, would you have any other tips on how to help me?
me too
Same problem here, I think is corrupted preloader.
Anybody?
brudieu said:
Same problem here, I think is corrupted preloader.
Anybody?
Click to expand...
Click to collapse
I also think that's it, did you solve it?
Victor Oliveira said:
I also think that's it, did you solve it?
Click to expand...
Click to collapse
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Augustoandro said:
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Click to expand...
Click to collapse
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
mine is till dead, I tried with linus but did not work
any Idea?
Victor Oliveira said:
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
Click to expand...
Click to collapse
Yes
brudieu said:
mine is till dead, I tried with linus but did not work
any Idea?
Click to expand...
Click to collapse
Mine is still dead, I do not even know what to do anymore, is yours also the kiicaa mix?
Solution
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Victor Oliveira said:
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Click to expand...
Click to collapse
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
brudieu said:
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
Click to expand...
Click to collapse
I used this rom https://yadi.sk/d/OBnsnz2t3RMo2B
and SP_Flash_Tool_v5.1628
thanks Victor Oliveira your solution worked a treat many thanks and a thank you sent