Hello guys,
at first sorry for my bad english but reading is easier then writing english for me
Yesterday I rooted my P760 successfully and I installed the ported AOKP 4.2.2 and the PAC-Kernel (CPU1200/GPU384).
So good. After a time of configure my phone, I wanted to reboot into recovery. I click my Power-Button, then reboot and then into recovery.
Since this click my phone doesnt start.
No normal start, no recovery start. NOTHING!
At night my phone was hanging on charger, so battery seems to be full.
Please help me. WHAT CAN I DO?
Regards
Maik
BaLLi89 said:
Hello guys,
at first sorry for my bad english but reading is easier then writing english for me
Yesterday I rooted my P760 successfully and I installed the ported AOKP 4.2.2 and the PAC-Kernel (CPU1200/GPU384).
So good. After a time of configure my phone, I wanted to reboot into recovery. I click my Power-Button, then reboot and then into recovery.
Since this click my phone doesnt start.
No normal start, no recovery start. NOTHING!
At night my phone was hanging on charger, so battery seems to be full.
Please help me. WHAT CAN I DO?
Regards
Maik
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
anirion said:
Try this: http://forum.xda-developers.com/showpost.php?p=40483954&postcount=2
Click to expand...
Click to collapse
Hey, thx for your response.
But on my phone are no kind of reaction at the screen. So I can't use the "SW Upgrade"-Mode =/
So if I connect my phone without battery to my PC I hear the USB-Connect sound but the entry in device manager is flapping.
What can it be?
If your phone answer at usb connect when battery is down that is a good sign. Try install omap drivers and flash custom recovery mode again. After u will be able to flash your stock soft again
The OMAP driver are still installed. The entry in device manager appear and 1-2 seconds later it disappear.
Im using Win7 64bit - is this the problem of OMAP?
BaLLi89 said:
The OMAP driver are still installed. The entry in device manager appear and 1-2 seconds later it disappear.
Im using Win7 64bit - is this the problem of OMAP?
Click to expand...
Click to collapse
It shouldn't. Try on diffrent computer, I have problems with connecting my device on mine but on diffrent one it works quite well. I don't know why.
You can also try this and flash recovery: http://forum.xda-developers.com/showthread.php?t=2119090
I have tested connecting to PC at my wifes desktop. The same Problem.
The link you have posted seems to work. I can work an my phone over adb (fastboot). I have rewritten recovery but it doesnt start...
EDIT:
If I want to write the rom or format/erase any partition over fastboot, i get following error, that the partition does not exist
C:\Android>fastboot flash data aokp_p760_unofficial_Mar-19-13.zip
sending 'data' (147524 KB)...
OKAY [ 75.571s]
writing 'data'...
FAILED (remote: partition does not exist)
finished. total time: 75.581s
Click to expand...
Click to collapse
BaLLi89 said:
I have tested connecting to PC at my wifes desktop. The same Problem.
The link you have posted seems to work. I can work an my phone over adb (fastboot). I have rewritten recovery but it doesnt start...
EDIT:
If I want to write the rom or format/erase any partition over fastboot, i get following error, that the partition does not exist
Click to expand...
Click to collapse
Unfortunately it looks like the nand is defevtive/broken . There is nothing you can do.
So I have no chance to "repartition" my phone?
BaLLi89 said:
So I have no chance to "repartition" my phone?
Click to expand...
Click to collapse
It's most likely hardware problem. Send it for warranty repair, don't mention the bootloader or custom Rom .
That will I make. Anyway thank you so much for your help mate!
I hope i get a new phone
Beautiful evening!
Maik
Related
Hi all! My friend´ve a Hero and after radio update the phohe has bricked. See this video:
http://www.youtube.com/watch?v=R5ihQU7DoDU
How to fix this?
Thanks.
Nobody know?
It´s such!
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Lord Lucan said:
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Click to expand...
Click to collapse
Radio: 6.35.09.26
ROM: Modaco-3.1
Recovery: RAV-hero-v1.5.3.1
Thanks for u support.
Have you tried turning it on while the charger is plugged in?
Lennyuk said:
Have you tried turning it on while the charger is plugged in?
Click to expand...
Click to collapse
Yeah, but charger don´t works on flash image and the battery is fully!
:S
Thanks.
And you have tried to go back into the recovery?
Lennyuk said:
And you have tried to go back into the recovery?
Click to expand...
Click to collapse
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
fabioccoelho said:
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
Click to expand...
Click to collapse
Try turning it on with the power button and the second you see any life hold down home.
I don't think this will work but it might be worth a try.
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
bonesy said:
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
Click to expand...
Click to collapse
Yeah, adb debug is check! But, i can´t access fastboot or recovery mode.
Thanks.
copy ra_hero recovery onto the root of your sdcard
then...
adb shell flash_image recovery recovery-RA-hero-v1.5.3.1.img
oradb shell flash_image recovery-RA-hero-v1.5.3.1.img
I cant remember which soryy, but one should work!
device not found
Hi! I am in the same s..t so I tried it all
some people managed to do this and get it working again :
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
MINE IS EXACTLY LIKE THE YOUTUBE VIDEO and it didn't!
Any other sugestions?
[email protected]
yea i think u have different problems,his goes to recovery.yours is doing the same as my Sapphire which is being collected by HTC tomorrow for repair pressing HOME+POWER will not get to fastboot! it will take you too recovery
and finaly the FIX
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Thanks for all answers. But only kind to solved this is with JTAG to Motherboard.
Thanks!
same issue here
Hi everyone
I've got the same problem showed in that video. Could you guys help me out? Is JTAG the only way? My mobile simply can't be recognize on Windows and ADB just doesn't list the device...
I've tried every key button combination, but all I got is that Out of the Box image (seems like it's the background of the recovery mode or smthg)
I got my phone charged from USB (from my notebook) but windows doesn't recognize it, even if I dloaded the drivers for it.
Any suggestion would be of great help
Thx a bunch
TAG
same issu here
MESCU said:
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Click to expand...
Click to collapse
Hi MESCU
Could you tell us a little bit more about what happened to your phone and what procedure the guy who fixed your phone did? thx for your help
TAG
phone and the box image
sorry if this is a bit out of place but i had something similiar but not as major...i just tried flashing my radio update today and it went well till it said reboot press home and power...i pressed that then it got stuck in phone and box picture for a good 5 minutes..i didnt know how long to late because im new to this..thankfully when i pressed home and power and it came back to the recovery and i just reboot and it works fine now!
Hey Guys,
Really hoping someone can help me out here. I've been trying to root a friend's Xperia U for the past 3 days now, without much luck!
Its on ICS, Firmware ST25a 6.1.1.B.1.10, unlocked bootloader. The two methods are Bin4ry's and using FlashTool .For starters, USB debugging is enabled.
In both cases, the phone was undetected, even after installing loads of drivers found all over the web. After extensive reading, I came across a suggestion to enable USB tethering, and lo behold! The phone was detected!
"What's the problem then?", you ask?
Well, after following the careful instructions to restore the 'RootME' backup (on the phone), it phone reboots. When it comes back on, the screen is a mess, very dark (similar to a burnt screen) and extremely slow to respond. I read elsewhere that this is quite normal(!) and will be fixed after subsequent reboots.
The problem lies here, as I believe USB tethering is no longer ticked after the reboot, and it needs to be, doesn't it? Both Flashtool and the script wait for the phone to be detected, with no change at all. I somehow manage to navigate to 'Settings', but on trying to access tethering, it always crashes as below:
"Unfortunately settings has stopped"
Ugh.
How do I see the message when the screen is burnt out, you ask?
Pulling down the notification bar lets me see parts of the screen on its way down, and back up
Soooo...
Without USB tethering enabled, rooting does not complete, and I am left with a nearly un-useable device (until a factory reset). My internet speeds are terrible, and I am now in the process of downloading another firmware (6.1.1.b.1.54) in the hopes that it does not need USB tethering enabled to be detected by Flashtool (or Bin4ry's scripts)!
Thoughts?
I think you must flash a new firmware to get your phone back,its quiet simple. don't worry this will bring back your phone. let me know how that went.
LMH1998 said:
This is devolpment section, don't post questions here.
There is a secten called "General" where you can post this question.
This thread will be closed soon.
Click to expand...
Click to collapse
My bad!
I shall take this there, then
Questions do not belong to Development section. Thread moved.
desmond462 said:
I think you must flash a new firmware to get your phone back,its quiet simple. don't worry this will bring back your phone. let me know how that went.
Click to expand...
Click to collapse
No issues bring it back to normal, mate! A factory reset does that!
I want it rooted!
Somebody?
Anybody?
sanstorm said:
Somebody?
Anybody?
Click to expand...
Click to collapse
First thing is I dont own xperia U!
But the way that I root my sola, is flashin cwm kernel and then flashing su binarys from cwm.
I think that method works with U.
No luck!
Wadaaaa said:
First thing is I dont own xperia U!
But the way that I root my sola, is flashin cwm kernel and then flashing su binarys from cwm.
I think that method works with U.
Click to expand...
Click to collapse
Thanks for the tip!
But..
I had flashed firmware 6.1.1.B.1.54 to try my luck with that, downloaded the CWM for the unlocked bootloader from here. It was a '.elf' fle, so I followed the steps mentioned here to flash it. I hope these are the correct steps I followed?
I get the output as:
===
07/038/2013 17:38:01 - INFO - FASTBOOT Output:
sending 'boot' (16384 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.002s
===
:silly:
Once again, I should mention that the phone is detected only when "USB tethering" is enabled.
sanstorm said:
===
07/038/2013 17:38:01 - INFO - FASTBOOT Output:
sending 'boot' (16384 KB)...
FAILED (remote: The Device must be rooted first)
finished. total time: 0.002s
===
Click to expand...
Click to collapse
And you sure your bootloader is unlocked?
If i remeber correctly, I had same problem with my sola. Have you updated flashtools drivers? Located c:\flashtool\drivers. And have you fastboot without flashtool?
Got it done
Thanks a lot for your inputs guys!
In the end, I handed it over to a pal who got it done
The drivers seemed to be the issue, I had installed so many of them, I doubt my violated machine would ever touch an Xperia again
Cheers!
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
VoodooBiscuit said:
Hello,
I recently switched to kitkat but after flashing I realised that the stock rom has too much bloatware and was practically very annoying to use (I'm looking at you, Norton and LeSave.
Now here's my problem:
I can't flash anything anymore using flashtool, it detects my phone, loads one file, but then goes down to 0bytes/0bps and it keeps hanging there untill I get an error. I tried to get a workaround by rooting and installing TWRP it but nothing works, it refuses to root.
Can anyone help me? I don't know what I did wrong and I'm afraid I messed up my partitions or something.
I just want to go back to Jellybean with a clean rom, no bloatware, preferrably rooted.
Thanks in advance,
Biscuit
Errors I get:
''BROM ERROR: S_FT_READBACK_FAIL (4009)''
Google didn't get me any further ):
Click to expand...
Click to collapse
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
stympy said:
You messed up everything!
Hmmm... you need a custom firmware if you want something light !
Like life 0.7 !
If you want a custom made firmware fot the chinese base but without bloatware and rooted you can try Baralajbi firmware.
Good Luck.
Click to expand...
Click to collapse
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
katsanos said:
I have the same exact problem...
I am trying to flash Baralajbi firmware but it goes down to 0bytes/0bps and it keeps hanging there until I get an error.
How can we flash anything (as you advice) if Flash tools do not work?
Partitions are really messed up. In the recovery menu ("No command" screen with dead android ) I am trying the "apply update from sdcard" option , and it redirects me to the internal memory!
Chinese phone , tried P780_ROW_S228 rom but it is laggy and cellural reception is poor ! Gps malfunctioning also...
Click to expand...
Click to collapse
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
stympy said:
Hi. Try this. Retry to flash but this time when flash tool do nothing, open the back cover of your phone and keep the red button pressed for 20 seconds. When you release the button flashing process should start.
Tell me if not.
If not... Reinstall the drivers... and repeat the flashing process.
Sent from my Lenovo P780
Click to expand...
Click to collapse
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
satanduck said:
Open "Device Manager" on your Windows PC.
Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
Click to expand...
Click to collapse
katsanos said:
it didn t work.
The moment i press the reset (red) button ,the classic Flash Tools errors appears . The same as before
When you say "reinstall the drivers" what do you mean?
is it the proccess described here? http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
stympy said:
Nope
Tutorial and drivers here.
Scroll down to my seccond post.
Click to expand...
Click to collapse
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
katsanos said:
Thanks for all your answers. I think its great that you are helping all those people,like me with our stubborn devices!
Tried what you proposed,but No, it didn t work either. Even tried installing the MTK drivers from scratch to an other "clean" laptop, on which i had never before connected my p780... No luck there either. Still Flash Tools refuse to do anything
Click to expand...
Click to collapse
do you have time for a team viewer sesion ?
Yes, of course . I am sending you a pm
Sent from my SM-T310 using Tapatalk
stympy said:
do you have time for a team viewer sesion ?
Click to expand...
Click to collapse
thanks for everything ! :good::good:
everything seems allright now
katsanos said:
thanks for everything ! :good::good:
everything seems allright now
Click to expand...
Click to collapse
You are wellcome!
Hi everyone and sorry for my bad english i'm Italian i have a big problem with a P20 lite that won't boot up. When i power on the device he got stuck on brand screen (TIM branded) and if i try to shut it down the phone starts a rebooting in the same screen and got stuck in TIM screen another time. I tryed to enter in recovery in many ways, even with USB and ADB, but the only response i have is with buttons and is a totally green screen with a blue square in top and red one in bottom of the screen with this green background, i can only go in Huawei download mode and use ADB tools, i can't even use the official HiSuite application like the Huawei download mode suggest me because i can't activate developers options. The good fact and the only road to work i guess is that i can use the ADB tools but even if i try to enter in recovery typing "fastboot reboot recovery" the board give me "not allowed" if i try to reflesh system or any stock img he don't allow me to do anything except mormal reboot and device COM address with the check devices command. The bootloader is clearily locked and with some research i found that the only way to unlock the bootloader on this devices is trust to unlocking services with credits like "DC Phoneix, Chimera etc." but my doubt now is.. if i'm ain't able to power on and go in menu and information of the phone to get needed infos like serial and others and sharing this with services to let the procedure work, how i can do? OR the services like this is total automatic i only got to pay and go even with a total unaccessible phone? I have Chimera and i achieved to extract the stock img and UPDATE.APP to this phone but i'm unable (like i say) to flashing everything i can do anything else with Chimera? Or anything else with other methods? I also buyed the MTK dongle i wish to try it. The phone is totally stock not rooted, never unlocked. Sorry for my bad english the last time and thanks for reading. If some point or question it's not clear i'm here to explain better my doubt.
Androny4andro said:
i can only go in Huawei download mode .
Click to expand...
Click to collapse
Hi, what do you mean by that? E-Recovery ?
Ane how it got bricked?
-Alf- said:
Hi, what do you mean by that? E-Recovery ?
Click to expand...
Click to collapse
No 0 Recovery only download/fastboot mode
Androny4andro said:
No 0 Recovery only download/fastboot mode
Click to expand...
Click to collapse
Okay, but what is "download mode"?
And how it got bricked? It's very important!
-Alf- said:
Okay, but what is "download mode"?
And how it got bricked? It's very important!
Click to expand...
Click to collapse
There's no special event to the brick, is bricked by itself, i post a link that can explain the mode, it's not mine of course i got in web but it's the same screen of mine
https://obrazki.elektroda.pl/3270005500_1518165931_thumb.jpg
Androny4andro said:
There's no special event to the brick, is bricked by itself, i post a link that can explain the mode, it's not mine of course i got in web but it's the same screen of mine
https://obrazki.elektroda.pl/3270005500_1518165931_thumb.jpg
Click to expand...
Click to collapse
It isn't download mode, simply fastboot mode. Bricked by itself? Bro, I also had this problem with the green screen, it happened after rebranding, after flashing wrong oeminfo and wrong FW .* But with the unlocked BL it was not a problem. Okay, it doesn't matter...
In fastboot mode run this command:
fastboot oem get-build-number
tell me result, please.
-Alf- said:
It isn't download mode, simply fastboot mode. Bricked by itself? Bro, I also had this problem with the green screen, it happened after rebranding, after flashing wrong oeminfo and wrong FW .* But with the unlocked BL it was not a problem. Okay, it doesn't matter...
In fastboot mode run this command:
fastboot oem get-build-number
tell me result, please.
Click to expand...
Click to collapse
I'm pretty sure that i don't have doing nothing about this or other to have this disastrous result.. anyway the result of command is that:
(bootloader) :ANE-LX1 9.1.0.306(C55E7R1P6)
OKAY [ 0.020s]
finished. total time: 0.021s
Androny4andro said:
I'm pretty sure that i don't have doing nothing about this or other to have this disastrous result.. anyway the result of command is that:
(bootloader) :ANE-LX1 9.1.0.306(C55E7R1P6)
OKAY [ 0.020s]
finished. total time: 0.021s
Click to expand...
Click to collapse
Okay, I believe You but it's strange...
Thanks, wait a moment please, I sent your data to an expert.
-Alf- said:
Okay, I believe You but it's strange...
Thanks, wait a moment, I sent your data to an expert.
Click to expand...
Click to collapse
it's my friend's smartphone actually the sister's smartphone, they don't understand nothing and are not interested about modding or things like that they are the kind of people that use the phone only for normal use. That's because i'm pretty sure this telephone is not touched for "strange" modding, rooting, etc. I don't known if my friend sis' have a geek/Android nerd friend or boyfriend at college but i don't think, i don't known and have no interest to known that :laugh: anyway thanks for help i'm waiting you
Androny4andro said:
it's my friend's smartphone actually the sister's smartphone, they don't understand nothing and are not interested about modding or things like that they are the kind of people that use the phone only for normal use. That's because i'm pretty sure this telephone is not touched for "strange" modding, rooting, etc. I don't known if my friend sis' have a geek/Android nerd friend or boyfriend at college but i don't think, i don't known and have no interest to known that :laugh: anyway thanks for help i'm waiting you
Click to expand...
Click to collapse
So, it's possible unbrick this phone online with TeamViewer on PC using paid service ministryofsolution.com .
And need to open back cover of your phone (due to a test-point method). IMO the best solution. Or you can try DC-Phoenix for 19euros, but you have to do everything manually, without experience it's a risk...
https://mega.nz/file/nkZTAYJJ#VtavigGBgDkgJAJk6a5M-3DsUfX4bMjJ_gKjbqA2wpI <------ no lose oem and imei board !
download image download tool 2.0.0.9
charged batery
1. dissasembly the phone.
2. short test point (find on www) install drivers if need
3. open Image download tool
4. select xml from link pres play button wait till finish.
5. re update by stock match to ur phone.
If u have error when write sec uce boot its mean board isnt suitable!
rest errors post here