Updating to JB failed - HTC Desire X

I got problem with updating my phone to newest android version (JB)
I download update pack properly, press install now, after that my phone restarts and on screen appears 2 green arrows, picture of some mobile and loading bar.. this is still normal, but after that, aprox. 30s.. instead of green arrows there appear question mark, my phone restarts and update is not going to happen.
Hard resets of phone dont help, any ideas how to fix this?
Thanks

I have the same problem. Can you advise me how to fix it

OK. I found the solution for red question mark. Remove the SD card and download the update to your phone storage. Finally, let the install.

Related

[Q] Unable to update after failed OTA

I got my Prime 2 days ago and after charging and powering it up for the first time, it began downloading a firmware update. I chose to install it, the Prime rebooted, and after the android logo with moving gears, it showed an android logo with an exclamation sign.
I rebooted it and then I got a notification that said "system update failed(2): unknown error". I then attempted to manually check for a firmware update, but I got "There is no update available for your device currently".
I tried copying the ASUS update zip to a microsd, I tried draining the battery, I did multiple factory resets, and it still won't update or even find OTAs.
I also tried with the installed version again (8.8.3.33) and even that resulted in the android + exclamation symbol.
Does anyone have any idea how to solve this issue? Or at least what could be causing it?

[Q] OTA Update 651.167.26.en.EU

Anyone had a problem updating to 651.167.26.en.EU??
I've tried to update (many times), the phone shuts down starts the install, gets about half way then reboots. When it does reboot I get a message saying the update failed. I've even done a factory reset (which I hated) but now joy. Grrrrr
Has anyone had this issue and have you manage to solve it??
Also does anyone know what location the phone saves the update to?
Perhaps you're lucky it failed because I am having the following problem after the update:
After updating wireless is stuck and won't either turn on or off.. in settingsmenu on the wlan activate button it just says "error" in the second line. on push it says "activating" for some time the drops back to error. So my question: Does anyone else have this an what can I do to correct this?
PS: Moto Support just says Factory reset but there is upfront no way I am doing this without having tried anything else..
You could always just root it and install a custom rom. My app will will root it in 1 click.
BreakDroid

[Neutrino] V2.9 GT bugs

I have experienced few bugs related to that ROM. First with the LauncherPro. I noticed than if you move phone to the landscape position, all icons in the app drawer get placed in one position. It looks like all of them move to position in row-1, first column. As I see dev behind the LauncherPro stopped updating it more than a year ago, but is there any other fix to this? That problem was in V2.8 of Neutrino as well.
Second bug is with OTA Updater. Whenever I run it detects V2.91 update correctly, and downloads it. The problem occurs after sudden shutdown (phone doesn't show that reboot screen, and works for a few seconds, just suddenly restarts). When booting again I get a little Android picture with yellow exclamation mark inside a triangle. After that I have to take the battery out, and after successful reboot, there is no update installed.
For the record - In SuperSU I've made sure that OTA Updater has its permissions.
kacpr said:
I have experienced few bugs related to that ROM. First with the LauncherPro. I noticed than if you move phone to the landscape position, all icons in the app drawer get placed in one position. It looks like all of them move to position in row-1, first column. As I see dev behind the LauncherPro stopped updating it more than a year ago, but is there any other fix to this? That problem was in V2.8 of Neutrino as well.
Second bug is with OTA Updater. Whenever I run it detects V2.91 update correctly, and downloads it. The problem occurs after sudden shutdown (phone doesn't show that reboot screen, and works for a few seconds, just suddenly restarts). When booting again I get a little Android picture with yellow exclamation mark inside a triangle. After that I have to take the battery out, and after successful reboot, there is no update installed.
For the record - In SuperSU I've made sure that OTA Updater has its permissions.
Click to expand...
Click to collapse
To update enter recovery and install the zip from /sdcard/OTA-Updater
lord182 said:
To update enter recovery and install the zip from /sdcard/OTA-Updater
Click to expand...
Click to collapse
shouldn't it work automatically though?

Venue 8 7000 Wont Install Update

Hello,
My Venue 8 7000 wont update. I keep getting the an Android update notification (that is supposed to fix stagefright, etc.). After starting the update it ends with the tipped over Android with the exclamation mark. Any ideas on how to troubleshoot this? BTW I did a factory reset and the issue still exists.
Thanks
Any ideas? Thanks
I'm having the same problem:
download package
request to reboot
after some time the tablet reboots and ends in fastboot screen
from there clicking normal reboot ends up in same system as before, asking again for same update
tried twice and got always the same behaviour
thanks
I would like to know as well
any update?
Anyone?

Wiko Fever No Command after update

Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...

Categories

Resources