Related
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
debinnv said:
Okay, I have gotten so blasted close with getting a custom rom on this phone. I can get them installed now and they are wonderful I tried gummy and aokp but for the life of me I can not get data to work I can not make or recieve phone calls. I am in roaming all the time too. I have gone through all settings and scoured the forum and I can not find an answer anywhere. Am I missing something totally obvious here? Does anyone maybe have any suggestion? Thank you guys for your help. It's just frustrating that I am so close.
Click to expand...
Click to collapse
What is the status of your Photon currently? Assuming it is rooted and unlocked, running what rom? Please provide info on what rom you are on now, which one you flashed from, and what process you used to get where you are. The more info provided the easier it will be to help.
Well lets see, currently I am back on stock, but here is what I did. I rooted, unlocked, installed CWM 5.0.2.7 I also flashed jokers recoveryv3 ( I follow QB's videos) So then I installed the gummy rom using this process. Format system, format data, format cache, wipe cache then dalvik cache. flash rom, flash rom again ( now I did not reboot into recovery after I flashed the rom the first time) I just went straight to install rom again. flash gapps, fix permissions. Reboot up and good loving it all. Waited 15 min then rebooted again. That's it. So I am at a loss. Thanks for help if you need any other info please let me know.
Oh I am on 2.3.4 with 198_7 also
In your system settings did you have "home only" or "automatic" selected for your roaming settings? For a lot of these roms, "automatic" is forced roam. And then if you didn't have roaming data enabled, that would explain why you were constantly roaming with no data.
Sent from my MB855 using XDA
Thanks so much .
I did have automatic checked but I did have roaming data enabled also. I flipped it around too with home only. I am truly beginning to think my phone is just plain "off " who knows. It's a shame though, I mean not that stock is bad on this phone but the custom roms are so much better imo. This is the first phone I have ever had a problem with. I have been flashing phones for years. Think I started with a HTC Mogul. That was a solid phone LOL
Does CM7 work for you? If it does then I reckon flashing that and setting it up, then instead of doing a full wipe keep your data and flash CM9 based rom over it, fix permissions and take it from there.
I have not tried CM7 but I can, sure can't hurt to try at this point. Thanks, I will give that a try tomorrow.
Have you tried *#*#4636#*#*? Sometimes flashing changes the radio in that menu. Be careful though, changing something can really Bork your phone. It should be on cdma prl I think
sent from my CM7 MoPho
Deb, my photon has never been kind to me with the 'flash twice' method. It always results in no data. Try cm9 again, but this time wipe cache, system, data, and dalvik, install version 3.1 of cm9, boot into it, reboot to recovery, wipe cache and dalv, then install the latest cm9 version. Always works for me. Good luck
Sent from my MB855 using XDA
Morning all, your all are great. Okay so I am ready to start again. I'm at stock right now so I need to get her all set up again. (Yes my phone is a she) Acvice, I am going to try your method first will let you know in a bit.
Looks like joker's site may be down so I need to try and find the 2 cm9 roms
I have this rom saved already on my computer
beta-0.6.9.1-cm-9.0.0-RC0-sunfire-UNOFFICIAL-signed.zip
Wonder if I should try that one or just wait
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
debinnv said:
After I install CWM 5.2.0.7 do I also need to flash joker's v3 recovery?
Click to expand...
Click to collapse
You don't have to, but I recommend it.
Sent from my MB855 using XDA
I think th3bill has 0.3.1 in his fixes thread
http://www.mediafire.com/?y7no1r460d4o8zf
sent from my CM7 MoPho
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
debinnv said:
Thanks, will also do jokers and thanks for the link bullfrog. dl'ng now
Click to expand...
Click to collapse
Glad someone provided you with that 3.1 link. Looking forward to see if it works out for ya.
By the way, you will know it worked if when you boot up in 3.1 you have working data. Flashing the newer version after that will essentially just update everything.
Deb, I take it the flash of 0.3.1 didn't work? Did you have data and then lose it when you flashed 0.6.9.3? What were your exact steps. I just rooted/unlocked and flashed my f-in-law's new photon and it worked just fine. Lemme know what you did and maybe I can help more
sent from my CM7 MoPho
Thanks bullfrog that's nice of you but honestly I'm good now As you know.
I didn't even try to install 0.3.1. I kept thinking about it, seeing I had no luck with 2 others previously so I decided to go the MIUI route and I'm a happy camper with that one. I am a flashaholic for sure, as we all are here. I am thinking though, I am gonna just be happy with where I am at for now. Of course I will most likely decide to give another rom a try at some point.
Of course I am already eyeing a few Samsung Epic touch's on ebay. I hear that one can be a brick just waiting to happen....weeeee I am having way too much fun
I'm glad you made it to MIUI. if you ever want to try cm9 or and of the similar ones (aokp, gummy, paranoid) I would suggest flashing that 0.3.1 first, then updating to the latest cm9, then flashing the variant
sent from my CM7 MoPho
Before you reply - let me lay a story for ya!
I bought a bran new TBolt off of my friend. I was using a fascinate up to that point and never had any issues. I loved my fassy - it was fast, reliable, and everything worked well.
Now onto the TBolt - I got the SOFF, rooted, got recovery, and got a few Roms. It is still working fine. What's the issue?
Well, I posted this on this forum and other forums more than once, but I can never seem to get an answer. After a few ROMS - Infected, Vicious, ThunderShed - I get a splash screen, or if it does boot it freezes as soon as it accesses the radio components. I have CM7.1 on it right now, ran liquid, vicious miui and other roms. Most roms do work in fact without any problems - but the few that I heard are amazing - do not.
What I have done:
Made sure my recovery is upgraded: I have tried latest CWM, EXT, CWM Touch, and the other one that was popular - all updated and did not work.
Always make sure to wipe: I always format all partitions. I have even used the Superwipe script as well, but to no avail.
I have installed a stock rom, wiped and then installed: Someone said that would work - it did not.
Double, no - triple checked my roms': Checked the MD5 sum of all ROMS and Recoveries.
Different Radios: My phone came with newest radios, and I downgraded, upgraded, and nothing.
Now, I do not mean to sound picky - but I am not happy with the TBolt at all. It works at half the quality that I had from my fassy. Wifi errors out sometime, Tether errors out sometime, it lags some of the time, and most of all - no ICS. Liquid worked well, but the touchscreen wouldn't respond during some games - not that I use it for gaming much anymore - but the idea remains.
It sounds like you are trying all of the right things, so unfortunately I don't really have anything helpful to offer. Just curious though, If you were happier with the fascinate, why stop using it? Did it break?
As far as your issues, I have found CM 7 based ROMs (or any roms not based off of sense builds) to be less reliable and have more "glitches" than sense roms. That certainly could explain some of your gripes with the TB. Have you been able to install any Sense roms other than stock?
I have long since settled on Chingy's gingeritis rom as the most reliable and feature filled, but obviously that opinion differs depending on who you talk to.
To answer your question first: I started using the TBolt because it was 4G and that was important for me at the time (I was a student and had no reliable internet). Things have changed now and I am most likely going to change back sooner than later.
I haven't tried many Sense roms. Which would be the most reliable and recommended?
I know you said you tried downgrading your radios and that your phone came with the newest ones flashed but if you haven't already done so, check this out.
http://forum.xda-developers.com/showthread.php?t=1048128
and here is the radio I've been using with no problems:
gu1dry said:
From the 2.11.605.3 RUU:
CDMA: 1.48.00.0906
md5: c6a5a9eee78e0f33267fa80ced3c49b8
LTE: 0.01.78.0906
md5: 6f33809cf2253c38a3c6bb970f030eee
Click to expand...
Click to collapse
One thing with switching to a AOSP rom from a sense based rom is that you have to use very specific radios. this page will help you find the exact radios you need to use for the rom you are running.
I am running Thundershed 1.6 with these:
http://forum.xda-developers.com/showthread.php?t=1605557
newest leaked radios and they work fine for me.
I use...
I use these with no problems.
Rom: http://forum.xda-developers.com/showthread.php?t=1409703
I use the 605.19 Radios.. http://forum.xda-developers.com/showthread.php?t=1605557
Flashed this kernel.. http://rootzwiki.com/topic/603-kern...minimalistic-kernel-620-6312-camcorder-fixed/
Click the "v6.2.0dev13 - Fixed camcorder again." link at the bottom.
I am running the kernel in "normal" mode.
No issues that I know of but I am still a noob with a post count of 2...
Alright. Thx for the help guys - for the time being I am back to the fascinate, but I will try your suggestions.
One thing I am also trying is the using the "non-semsung" micro sd card in the TBOLT.
I will report back after this weekend with the results.
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Rmbloungeact said:
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Click to expand...
Click to collapse
Wifi usually fixes itself after reboot, but for no-service I dont know.. Are you flashing correct version for your Razr (xt910/xt912), or flashing GSM patch if you have xt912 on GSM network?
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
LuckiestNut419 said:
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
Click to expand...
Click to collapse
Well I have been using safestrap since I used it on my Bionic and I am already familiar with it. The one that is bugging me the most is not being able to flash LiquidSmooth 2.9. (I am on SS 3.53 btw) Also I am using the XT912 and already researched the difference between 910 ROMS before flashing.
When I try to install it the error comes up saying:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warning: no file_contexts
set_perm: some changes found
E: error executing updater binary in zip '/sdcard-ext/Liquid-JB-v2.9-OFFICIAL-spyder.zip
Error flashing zip
I just wonder, if that thing is saying that the zip is meant to be an update for an existing version of LiquidSmooth. But on goo.im there is only 2.7, 2.8 and 2.9.
I've never seen that error (but I've been wanting to try LiquidSmooth, maybe I can duplicate the problem). I know with AOKP, I have to install on romslot2. For whatever reason. Have you tried any other slots besides 1?
EDIT
http://forum.xda-developers.com/showthread.php?t=2222535
The installation instruction for LiquidSmooth 2.9 say to install on RomSlot3, and only RomSlot3. I'll give it a whirl on 1 and see if the error is duplicated, but it shouldn't effect the install, regardless of the slot #.
http://goo.im/devs/liquidsmooth/spyder/Liquid-JB-v2.9-OFFICIAL-spyder.zip
This is the mirror I used to get the ROM.
Installed on Slot 1 without errors. Flashed gapps, wiped cache, restarted- wouldn't boot.
Wiped and deleted Slot 1
Installed on Slot 3 without errors. Flashed gapps, wiped cache, restarted- Success!
I never could duplicate the error you had, using the JB Liquid Smooth I got from goo.im
Also, for what it's worth, in the "Issues" category on the LS link from above, it said there was an autofix that would correct the wifi connectivity problem. Mine would never fully turn on wifi on first boot. Rebooted, worked perfectly. And the CM style setup went off without a hitch.
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Rmbloungeact said:
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Click to expand...
Click to collapse
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Rmbloungeact said:
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Click to expand...
Click to collapse
So I scrapped 3.5x for 3.11 and the install went perfectly normal. Accidentally installed the wrong gapps package and had a force close assault from hell. Redid it with the right gapps and everything is up and running now. I am so glad to have it running and ready to set up now. Thanks for your help guys!
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Heatshiver said:
First, make a NANDROID if it is working perfect on the stock ROM. This is my first step after root and recovery so that I can always fall back on something to check if there is a hardware problem, or just some sort of (system) file problem. Plus, it'll save you time if you have to go back.
Not sure that it matters, but is the stock ROM odexed, or deodexed?
The calling thing reminds me of when you use the phone overseas but it has yet to be unlocked. When you root, do you check with Root Checker? Do you have SuperSU installed? How about BusyBox? I know some items require BusyBox in order to work, but SuperSU should be installed.
As far as SuperSU, do you update it before switching back to the original kernel? One thing I noted is to be absolutely sure you do so in order to not lose your root when completing the rooting steps. I imagine this could cause other problems too.
I also suggest not using TWRP 2.6, which many people will tell you is quite buggy. Best to use the previous version.
The only other things I can suggest is ALWAYS doing a full wipe of everything before adding a new ROM. I used to do this to be sure I incurred no problems on my SGS3, because if I didn't there would always be something buggy happening.
Hope this helps.
Click to expand...
Click to collapse
Thank you, Heatshiver!
I always do a full wipe unless I'm doing a dirty flash for a ROM update. I will try reverting back to TWRP 2.5.0.2 (Whichever version that happens to be, I think it's .0.2) tonight and report my results. Also, just to clarify, I always make sure I have the most updated SuperSU/Superuser (Usually the former) and BusyBox.
I appreciate the suggestion.
-Travis
teemunknee said:
Hi all,
Long time lurker of XDA and Android user/modder since before Gingerbread. I want to apologize in advance if this post is either in the wrong section, and/or if something similar has already been answered/solved in another thread. I did multiple searches with nothing coming up as a direct hit, or even close for that matter.
I recently purchased an S4 from VZW (Mid-Late July). I rooted and installed TWRP 5.2.0.2 (Forgive me if that's not the exact version...) and flashed AOSP ROMs here and there. After a month or so, I started coming across an issue within all ROMs where I couldn't receive or make calls without my phone either freezing or rebooting. Anything I flashed, or modded, failed to remedy this. I tried different GApps packages, 4.2.2 and 4.3 ROMs, different kernels, and both radios, and absolutely NOTHING solved this. I searched everywhere (Even rootzwiki, forgive me fellow XDA members!), and could not find anyone with the same issue.
I attempted upgrading to TWRP 2.6.0.0 and even tried CWM, and that didn't help either. Eventually, things got so bad that I couldn't boot into ANY ROM, 4.2.2 or 4.3. After nearly 10 hours of trying to unbrick my phone, I finally managed to install Beanstalk 4.3, and while it was working incredibly buggy (Not Beanstalk's fault, the developer is a great developer!) nor could I make calls, I could still send texts and emails. I was able to FINALLY get the Odin3 application to work when I got home from work, and was able to flash the stock MDK image. From there I followed the steps to properly root and install TWRP 2.6.0.0. I installed Slim's Beta 5 4.3 ROM and GApps and everything was working properly! Calling, everything! However, when I made a reboot, it froze. Stuck in the "Samsung Unlocked" screen for over an hour. I pulled the battery, booted into recovery and did a factory reset/cache and dalvik wipe. It still didn't boot. From there I did a full wipe, and data format, installed Beanstalks newest 4.3 ROM and GApps, and everything loaded properly. Then I couldn't make or receive calls without the same issue. I then did the superwipe/format and installed PAC's newest nightly and GApps package, and was able to make calls, but then got stuck when rebooting, even after factory resets and cache/dalvik wipes. After multiple attempts, I gave up and reflashed the stock MDK Samsung image in Odin3 and am leaving it as is until someone here can help me.
I know this post was incredibly wordy, and I apologize for that, but I wanted to give you guys as much information as possible and explain where this all started, as it may lead to why I'm having these problems. I appreciate any and all responses and I will answer any question any of you have to the best of my ability. Please someone save me from the horror that is TouchWiz!
-Travis
Click to expand...
Click to collapse
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
As much as I love AOSP, I would have to agree with the poster above. I know TW is a pain but there are some pretty good ROMs in that flavor that you shouldn't have any problems with. I've had the no call issue on AOSP, and even though they are nice and free up quite a bit of room it's not worth missing calls over or constantly flashing. Maybe once our bootloader is unlocked things will become different but I'd stick with TW until that happens. I can confirm that TWRP 2.6 is very buggy...you'll have to download the 2.5 version and flash it instead of goomanager they install they latest version everytime I believe.
andybones said:
sorry for your troubles, but I am always baffled the way people just toss that word "brick" round
Your phone was no anywhere NEAR being a brick...
You simply are playing with fire flashing AOSP ROMs and not knowing how to fix the issues.
AOSP ROMs aren't technically "made" for our phones, the developers do a great job at making it seem like they are, though.
On the SG3 we had an EFS backup that Synergy discovered incase you flash an AOSP and get stuck in roaming which was quite often at first with AOSP, that was easy to fix, but with this phone I would be careful with AOSP ROMs, even myself, with a locked bootloader wouldn't flash anything besides TW, although I am biased as AOSP is my flavor.
I am sorry if this post comes off harsh or any other bad word. It's not meant for that..
Just to kindly ask you to do some research on what a "bricked phone" truly is.
it's a brick.. meaning won't power on, won't get a light when charging, nothing, your phone is just that, a $600 brick. and the only way to bring back to life IIRC is Jtagging the phone.. which requires taking the phone apart and jtagging the motherboard.
I hope you the best my friend.
Click to expand...
Click to collapse
Next time, I'll just say "Soft-bricked". Thank you for your reply.
-Travis
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
slim6596 said:
You also may want to try CWM recovery if everything else fails. I like TWRP but I kept having the exact problem you have. I switched and haven't had a problem since.
Sent from my SCH-I545
Click to expand...
Click to collapse
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
I also forgot to mention that I haven't been able to connect to 4G radios since before I started having issues with AOSP ROMs. Currently I'm on Eclipse's TW (With AOSP Styling) ROM. Everything appears to be working fine, other than 4G.
I've tried the SIM pull and reset, and nothing. I've tried manually setting it to LTE only, at least when I was able to do so when AOSP ROMs would boot for me, and nothing. I have a Galaxy Nexus that I booted up with this SIM in and I get 4G signal. Any Ideas?
Also, when I was on the stock image (MDK) I didn't have 4G either.
Has anyone else run across this issue? (MODS: Let a me know if I should create another thread, or search more intensively. I haven't seen a thread with this exact same situation. Plenty of 4G issue threads, but none with the same issues I've previously had, and I think it may have something to do with my past modding.)
-Travis
teemunknee said:
Would you mind telling me which version of CWM you're using? I haven't gone back to CWM since I went back to stock two nights ago.
Thank you for the idea!
-Travis
Click to expand...
Click to collapse
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks! I installed CWM 6.0.3.6 Touch and flashed Eclipse's TW/AOSP ROM and everything works well, but it's still no AOSP ROM.
-Travis
Hi all,
I'd like to thank everyone for the suggestions.
An update: Currently I'm on Eclipse's TW v2.0 ROM (TW, with AOSP Styling) and everything works properly. My current recovery is CWM 6.0.3.6 Touch, and I'm not experiencing any booting or calling issues. 4G is the only thing I don't have working.
I'm hoping that someone with my same problem can give me another idea so I can get an AOSP ROM working, preferably with 4G. I'm sure some, if not most, understand my dislike of TouchWiz and strong preference towards stock Android/stock Android based ROMs. Slim6596 said that he uses Philz Modded CWM Recovery and has no issues anymore. Could that really be my solution?
Again, thank you all for your help and ideas. I love XDA for this reason.
-Travis
slim6596 said:
Philz touch modded CWM. Don't have a link though. Sorry.
Sent from my SCH-I545
Click to expand...
Click to collapse
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
teemunknee said:
Hi Slim,
Sorry to bother, but I was curious if you were specifically using the LOKI patched version, or just the regular version?
-Travis
Click to expand...
Click to collapse
Loki patched, I believe.
Sent from my SCH-I545
slim6596 said:
Loki patched, I believe.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I have stuck to TW ROMs. Pretty soon I'm probably not going to be flashing anything. Switching to Motorola and giving Vz my MDK S4 back. (Reception and dropped call issues.)
Sent from my SCH-I545 using Tapatalk 2
teemunknee said:
Thanks!! I installed the Loki-Patched version last night.
I tried flashing two AOSP ROMs, but have no radio signal at all. I'll experiment.
-Travis
Click to expand...
Click to collapse
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
egore93 said:
I believe you have to do the extended phone function. Its a code on the dial pad and select cdma. I have read this but don't recall where.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
teemunknee said:
Are you referring to the *#*#4636#*#* dialer code? I didn't even try that because in my settings, everything was set to CDMA, but that's something I can try. I have everything backed up, so I can just wipe, install, and try that. If it doesn't work, I can always revert back.
Thanks for the suggestion!
-Travis
Click to expand...
Click to collapse
Yes that's it give it a go.
Sent from my SCH-I545 using Tapatalk 4
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software. I ended up giving up and just kept pushing the OTA off. It got so bad that I decided last night to install a recovery and then flash an unofficial CWM rom. So this morning it was working fine and then all of the sudden, I lost VZW data. Couldn't get any signal. So I decided to try to flash the Official Cyanogenmod 11. That blew up during the setup and gave me an error that it could not find any cellular service. I wiped the phone and tried to restore the backup I made of my stock rom with the recovery on it. I made the backup the second the recovery was finished. It's giving me an MD5 error?? I've tried this multiple times with the same result. So, I then decide to flash one of the two roms (unofficial & official) back to see if I can get the phone working again. No such luck.... It keeps trying to set up my "cellular service" and just runs. Nothing ever finishes. I'm really worried at this point. I would be perfectly fine to flash a Verizon image and go back to stock. But I can't seem to find out how to do this or where to find the file. Please help me.. I'm getting desperate.
Edit: I tired to flash the Unofficial Rom again and this time it seems to be working. I would still rather just go back to stock though. If anyone can point me to the correct place I'd be very appreciative.
Thanks
Dave
Click to expand...
Click to collapse
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
startswithPendswithOOH said:
Here is a link to flash back to stock: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
I know you wanted to take the OTA, but why not download one of the stock based 11c ROM's, like Jasmine 3.0? That way you'll still get the latest version(11c) but you won't lose root and recovery. The OTA patches root, so no recovery either. Here's a link for Jasmine 3.0 stock based 11c if you want to try it: http://forum.xda-developers.com/verizon-lg-g3/development/rom-jasminerom-v1-0-t2904641
Also, there has been issues with data on the CM builds. It seems pretty common right now. Check the CM threads for more info on that. I believe there is a command people have been entering(killall rild in terminal emulator) to get data back, but it seems 50/50 that it'll work.
Click to expand...
Click to collapse
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
dbow32 said:
Hey thanks a lot for your reply. I understand what you're saying with going back to stock. My issues with flashing custom Roms is that I have to have my phone work 100%. I've been flashing since the original Droid Incredible. And I've NEVER found a Rom that didn't have minor glitches and issues. Usually those issues affect my daily routine. I'll give Jasmine3.0 a shot and if it works I might just keep it. If not i'll just suffer through VZW's BS! Anyway, really appreciate your input.
Dave
Click to expand...
Click to collapse
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
dbow32 said:
Ok, I was stock rooted to allow for wifi hotspot. Once I started getting the latest OTA from VZW I decided to try to go back to stock to accept the OTA. I went through all the YouTube video's and loaded the LG software but my phone would never sync to the LG suite software.
Click to expand...
Click to collapse
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
BladeRunner said:
Which drivers were you using? I had trouble with the Unified Drivers linked in some posts and had to use the Verizon specific drivers. I also had to usually reinstall the drivers each time I tried to use the flash tool to get it to recognize my phone.
Click to expand...
Click to collapse
To be honest, I'm not sure what drivers I was using. I did a Google search for LG suite and found the closest version I could find. They didn't have the VS985, Only P985. So that might have had something to do with it.
startswithPendswithOOH said:
Glad to help. I'm with you on the 100% functionality too, so that is why I'm on Jasmine 3.0. Don't get me wrong, I love custom ROMs and all the work the devs do, but until all the kinks are worked out I'd rather be stock.
Also, I'm not trying to advertise anything, but flashing the skydragon kernel into Jasmine has helped the speed/lag and battery life as well. Its worth a try - but it only works on stock/non-AOSP based ROMs. If you try it though, also download the stock 11c kernel that the OP put in the thread just in case you have issues. I don't have the link handy, but the kernel is located in the "original android development" thread. Peace
Click to expand...
Click to collapse
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
dbow32 said:
I have a question, what is the "Modem" for? BTW, this Rom is VERY nice. Thanks
Click to expand...
Click to collapse
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
startswithPendswithOOH said:
Modem is the radio. Some people reported better signal strength on the 11c modem versus the 10b modem, but I didn't notice too much of a difference myself.
And glad you like the ROM, but all thanks go to hsbadr who came up with it
Click to expand...
Click to collapse
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
dbow32 said:
You know, it's really odd but the last few weeks my phone's signal has dropped. I listen to Sirius through my phone during the day at work. And I've always received 1 to 2 bars of 4g. But the last few weeks, It's dropped to about 2 to 3 bars of 3G. I thought maybe VZW was secretly throttling me. But maybe it's the updated Radio?
Click to expand...
Click to collapse
It's possible the modem could've been causing problems. Is 11c better or worse for you? And its also possible big red was throttling you too. That seems like something they'd do.
If you use/like xposed framework G3 tweaksbox is a good app to get for customizing your phone a little bit. And greenify and amplify are good xposed apps that help your battery life a whole lot. They are worth checking out in the play store.