Related
Tuesday night I loaded CM7, and then the Market wouldn't update my apps so I decided I would restore BAMF 1.5. After doing so, the Market just gave me "Fails" trying to update, and I could not access recovery, as I was going to do a complete wipe and reflash. Most of Wednesday, an extremely helpful & knowledgable member, Mattgyver83, tried diligently to help me rectify the situation, but to no avail. We tried to Fastboot, tried flash_image, tried fix permissions...shoot, I practically wore out adb..anyway, I ended up reverting back to stock and unrooted. I used jcase's method to revert back to stock, and that was painless, and successful. I decided last night to try rooting again, thinking a fresh root would solve my issue of not being able to access recovery. Root was successful, but I still cannot access recovery, through rom manager, or through bootloader. When I attempt it my Tbolt goes to white HTC screen, and stays there. All functions of my phone now work, and all aspects of root work, except I cannot flash anything. Rom manager shows I have clockwork recovery, but I just can't get to it.
Sorry for the long ramble. If anyone has had this issue, or if anyone knows a fix, I would appreciate it. Otherwise, I wait for Gingerbread.
Thanks
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
travishamockery said:
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
Click to expand...
Click to collapse
Tried that, but thanks. Still just goes to white HTC screen, and stays there until I do battery pull.
jr4000watts said:
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
Click to expand...
Click to collapse
I can get to bootloader, just not able to get into recovery.
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
monolithic said:
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
Click to expand...
Click to collapse
Thanks, but that didn't work. I think something in my os got lost when I restored BAMF from CM7.
Yea I spent a good few hours yesterday trying to help Orio out and we attempted a ton of things to try and fix the recovery issue, this post should offer a bit more insight to the methods used, this is running off memory;
adb reboot recovery failed
Reinstall latest Rom Manager apk and Flash CWM
flash latest rom manager via fastboot (CWM only)
(fastboot flash recovery /sdcard/recovery-clockwork-3.0.2.5.img)
**did not do fastboot erase recovery first**
"return to stock safely and properly" XDAthread by jcase
return to stock image [RUU], reroot, try again
try to boot into recovery via hboot
manually installed fix_permissions.sh script and busybox on rooted stock, ran.. didnt fix
tried to see if flash_image method would work, didn't
All of the above have failed and we basically tried almost all combinations. Not once would this phone get back into recovery, even after flashing the appropriate RUUs which include either stock android or CWM recovery. The only thing we have not currently attempted which might be the last thing left is to do is manually install the nandroid.sh script and do an advanced restore of the recovery image only from a nandroid backup on SD. I would rather not go down this method as it could have an undesired result, I have done it to restore a G1 back in the day but not 100% if its gonna work on a tbolt. Thankfully his phone boots, and we can get into hboot, but yea.. pretend recovery just doesnt exist at all...
Curious if anyone has any knowledge above what we have already tried.
monolithic said:
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Click to expand...
Click to collapse
I recall the same thing and its a good thought however that was mostly a generic error due to a CWM update and CM6 (I think) but either way flashing an RUU should override this shortcoming and im pretty sure that issue was worked out in CWM as well.
Not to be rude, but I don't think this question belongs in the development section.
Orio56 said:
I can get to bootloader, just not able to get into recovery.
Click to expand...
Click to collapse
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
hogowner said:
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
Click to expand...
Click to collapse
Thanks, but no, I deleted that after loading it. I actually reverted back to stock/unrooted last night and rerooted and the problem still remains. It's quite strange.
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
shelooga said:
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
Click to expand...
Click to collapse
That is what I was going to suggest. In ROM Manager at the very bottom try and flash an older version.
Sent from my ADR6400L using XDA Premium App
SUCCESS !!!
I fixed it !
Apparently, when I loaded up cm7, files showed up about the same time on my sdcard in clockworkmod download file. I deleted those files, and reflashed clockworkmod in rom manager, (which this time took like 3 - 4 minutes), and rebooted into recovery and it worked...did it again, just in case it was a fluke and it worked.
All is well now...the planets are realigned !!!
Thanks everyone for your ideas and especially thanks to mattgyver83 who helped me for something like 4 hours yesterday. Exceptional kindness !!
mods...you can close this thread.
GREAT NEWS!!!! CONGRATULATIONS!!
THANKS FOR REPORTING BACK!
This may help out other members with the same problem!!
now go ahead and start playing with your T-BOLT again!
That's a very odd solution. My first two things to try would have been:
1) fastboot:
fastboot erase recovery
fastboot flash recovery C:\some\local\path\recovery.img
You can't, well, probably shouldn't, flash a recovery from the /sdcard. When in fastboot mode I don't think the sdcard is even mounted. Either way, I think fastboot needs the img file on the local file system.
2) Create a PG05IMG.zip file with the recovery.img file in it, and flash that through HBOOT. Although this should have been done in some form or fashion when you downgraded or re-rooted, so YMMV.
I have a Galaxy S 2, I777 from AT&T. I had been running UnNamed 2.0 for a while. I started messing around with different modem files trying to get my data rate a little higher. When those failed to work, I decided to go back to stock and start from scratch. This is where my trouble begins:
I flashed with ATTGalaxyS2Unroot_SGH-i777.tar using Odin 1.85. I've used that before and all was well. After this flash, I'm stuck in a boot loop. The galaxy s 2 logo just keeps recycling.
I have tried a lot of other items I've found on here in various threads about getting out of a boot loop, but have not been successful. I was able to get to the stock recovery mode, chose to wipe user data and did the "yes I'm sure" option. The phone rebooted and I have not been able to get back to it. When it tries, I get in yellow "deleting cryption meta data" and then the phone reboots.
My last attempt was flashing with i777uckh7-cl503881 full. Odin writes everything, says pass and the phone reboots. After it restarts, it quickly goes through some items:
-- Intalling package...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Successfuly installed package...
-- Copying media files...
successfully copied meida files (yes, media is misspelled on the screen)
-- Wiping cache...
Formatting /cache...
Cache wipe complete.
--Updating application...
Successfully updated application.
--Appling Multi-CSC...(again yes, applying is mispelled on the screen)
installing Multi-CSC
Can't access to '/system/csc/02U/system/'.
Successfully applied multi-CSC
Rebooting.
then I get the boot loop all over again. I am still able to get to download mode using the volume button, and my jig still boots to download mode too, so I think there's still hope, but I don't know what to do next.
Any help would be greatly appreciated.
The "deleting cryption meta data" error has been a particularly difficult one to get out of. I only remember seeing one person solve the problem, and I believe that the solution was to flash the siyah kernel. But you may find more details if you search on "deleting cryption meta data xda" or possibly "deleting cryption meta data siyah" as keywords.
Creepyncrawly:
Thank you for your post. I didn't find anything searching for that, but, I downloaded and flashed siyah kernel and was able to get to a recovery mode.
I am now restoring the nandroid backup that I made (luckily I was smart enough to do that) before I started messing with modems and stuff.
We'll see how this goes
you sir are a life saver. I was able to restore the nand backup and boot into the os again.
creepyncrawly said:
The "deleting cryption meta data" error has been a particularly difficult one to get out of. I only remember seeing one person solve the problem, and I believe that the solution was to flash the siyah kernel. But you may find more details if you search on "deleting cryption meta data xda" or possibly "deleting cryption meta data siyah" as keywords.
Click to expand...
Click to collapse
I think (but I'm not sure), but any custom kernel with CWM should be able to do this... It's only the stock kernel that has a recovery which does anything when device encryption is found.
Entropy512 said:
I think (but I'm not sure), but any custom kernel with CWM should be able to do this... It's only the stock kernel that has a recovery which does anything when device encryption is found.
Click to expand...
Click to collapse
I did not think of that, but it makes sense now. At the time, I figured I would stop and get help before I made it worse. Why I didn't restore to my backup to begin with is beyond me.
Do you think I could return to stock now, or is it more of a "once you have this problem you always have it" type thing? I'm going to leave it as is for now because it seems to be working fine. There may come a day though when I need to return to stock.
For those who are experiencing the "Deleting Cryption Meta Data" problem, creepyncrawly is correct, it is difficult to solve, but the following steps seem to solve it reliably:
Download and install the I777UCKH7-CL503881 Stock Binaries from creepyncrawly's download repository. Use heimdall or odin to load the stock binaries. You may need to load the param.lfs and/or the bootloaders. However, it may work without loading these files (and loading the bootloaders can be in the "danger zone")*.
With the stock binaries installed, the device will be in a boot loop, and entering recovery mode will either indicate that the device is installing CSC (unsuccessfully), or indicate that it is "Deleting Cryption Meta Data". In either case, you will be unable to actually access anything in the recovery.
In order to get to a working recovery, load the SGH-I777_ClockworkMod-Recovery_5.0.2.3. You'll need to untar this file to get to the zImage kernel file*.
With the CWM kernel installed, you should be able to actually enter recovery mode by holding down Volume Up + Volume Down + Power until the Samsung logo appears for a second time. Note: In this version of CWM recovery, the home button is the 'select' button and the power button acts as the back button. This is different than most versions of CWM.
Using the recovery run both clear data/factory rest and format sd card (in mounts and storage).
Finally, install the Siyah Kernel, using either heimdall* or CWM.
At this point, the phone should be restored, and you can re-flash the I777UCKH7-CL503881 stock kernel (on any other compatible kernel).
onecoolpilot said:
Do you think I could return to stock now, or is it more of a "once you have this problem you always have it" type thing? I'm going to leave it as is for now because it seems to be working fine. There may come a day though when I need to return to stock.
Click to expand...
Click to collapse
You can re-flash any kernel you like.
Thanks everyone who directed me to the steps for solving this problem!
* To load these kernel files, put the phone in ODIN mode by holding down the "Volume Down" button while the phone is connected to USB. Use either the ODIN or Heimdall tool to actually flash the device. See this post for complete instructions on flashing the files.
I've followed these directions multiple times but I can't seem to get past the Rethink Possible screen.
Steps I have taken:
Flashed full binaries
Went back into download mode with no reboot and flashed CWM (listed above)
Went straight into CWM
Wiped Data
Formatted SD
Flashed Siyah via CWM
Rebooted
Saw I was stuck at Rethink Possible
Cussed
I seem to get stuck at the boot screen on ANY Gingerbread rom I flash. I can flash ICS roms and they boot successfully. However, my device has the 0x19 FW bug and I would like to not make it a paperweight.
Red_81 said:
I've followed these directions multiple times but I can't seem to get past the Rethink Possible screen.
Steps I have taken:
Flashed full binaries
Went back into download mode with no reboot and flashed CWM (listed above)
Went straight into CWM
Wiped Data
Formatted SD
Flashed Siyah via CWM
Rebooted
Saw I was stuck at Rethink Possible
Cussed
I seem to get stuck at the boot screen on ANY Gingerbread rom I flash. I can flash ICS roms and they boot successfully. However, my device has the 0x19 FW bug and I would like to not make it a paperweight.
Click to expand...
Click to collapse
Is this the "Oh crap its stuck in a bootloop I'll sell it cheap on eBay" SGII that you bought on ebay for cheap, or a different phone?
Do you know the history of this phone? Knowing it can help with troubleshooting.
Did you ever see the "Deleting cryption meta data" error message?
As far as having vulnerability to the eMMC firmware bug, you are safe as long as you don't use the buggy kernel, which is pretty much out of the picture by now.
LOL, you read my other post. It is one and the same. The standard story from the seller. "I gave it to my Brother in Law and now it is like this." He stated it did boot properly before. Liquid indicator checks out (haven't pulled the back off to check the full indicator).
I don't get the "Deleting cryption meta data" but I do get the "multi-csc error". Wiping data doesn't seem to take care of that one.
It's really odd because I can flash ICS roms with no problems, but the GB ones stick at the bootscreen every time. Even CM7 stuck there.
I may have to try to rule out hardware damage at this point
OK, so you don't really know exactly what was done to the phone. I wouldn't rule out hardware damage, but I seriously doubt it, at least let's assume that there is some explanation in firmware. Really, the only things that could be wrong:
bootloaders
param.lfs
partitioning
Which stock package did you flash, the one from the return to stock guide (that doesn't have bootloaders, etc.) or the one from the Download Repository that does have bootloaders?
And where exactly is the phone right now firmware wise?
creepyncrawly said:
OK, so you don't really know exactly what was done to the phone. I wouldn't rule out hardware damage, but I seriously doubt it, at least let's assume that there is some explanation in firmware. Really, the only things that could be wrong:
bootloaders
param.lfs
partitioning
Which stock package did you flash, the one from the return to stock guide (that doesn't have bootloaders, etc.) or the one from the Download Repository that does have bootloaders?
And where exactly is the phone right now firmware wise?
Click to expand...
Click to collapse
The one from the repository with bootloaders. I tried the one without bootloaders first, but it did not fix it.
Currently I flashed over to ShoStock2. However, I'm getting alot of problems on that too (Com.android.phone not responding).
I can try to flash back to stock at any moment because I have no data on the phone.
I did try using the latest version of Heimdall, but it kept crashing at 42% (from what I read that is a known bug)
So the one thing you have not tried is flashing PIT? I wouldn't try that next if it was my phone, however, since it is the area I know the least about. There is not a whole lot of information available about using PIT with the I777 (as in nothing I could find).
The behavior of flashing to ICS and running OK but bootlooping on Gingerbread is new to me.
If you have a jig, does the jig boot the phone to download mode?
The phone should be recoverable. If it was mine, I would start by flashing the full stock package with bootloaders and param.lfs again. Then wipe data/factory reset from 3e recovery. Then flash the Gingerbread Siyah kernel. And then wipe data/factory reset from CWM Recovery.
Actually, I thought I typed that before.
I did flash the PIT file at one point out of desperation.
I have a jig that works beautifully (wipes the counter too) and has been a big help through this whole thing. That tells me I should at least have the correct bootloaders.
Do I need to let it attempt to boot between each flash or just go directly one to the other?
After a little Google, I think your phone has a problem with efs, corrupted or some such. Read this.
creepyncrawly said:
After a little Google, I think your phone has a problem with efs, corrupted or some such. Read this.
Click to expand...
Click to collapse
I actually found and tried that a few days ago. Never got that error message before. But I flashed the repair anyway. No change.
I did manage to just let the phone run for a while and all the process error messages went away, but the dialer refuses to start. I also noticed I don't think I'm getting any sound out of the earpiece.
I think I'm going to have to take the back off to check for water damage and to make sure they didn't bleach the dot.
I'll attempt to do some more flashing later tonight if the wife lets me.
Under normal circumstances, if you get the multi csc error after flashing back to stock, a wipe data/factory reset will clear it, and it will boot successfully.
creepyncrawly said:
Under normal circumstances, if you get the multi csc error after flashing back to stock, a wipe data/factory reset will clear it, and it will boot successfully.
Click to expand...
Click to collapse
Lol. Under normal circumstances indeed. I appreciate all the help so far. I wonder if there is something borked with the chip.
Sent from my SAMSUNG-SGH-I897 using XDA
Not sure if it helps much since you said you think the correct bootloaders are there but I had the exact same problem as you a couple months back. Like an idiot I flashed the original "one click" ATT ICS leak from Rootzwiki that updated my bootloaders. After this attempting to go back to CM7 resulted in me soft bricking the phone. The ONLY rom that would flash and work was that same ICS one click. Everything else Odin just failed on. Eventually I managed to get the complete stock GB back on it by flashing the full package in creepys guide several times. I gave up on Odin on my pc and had to remove Kies from my Mac so Heimdall would work but it flashed finally and I was saved. If you search through my posts here and find that thread maybe there's something in there that will help cause it sounds like you're having a bootloader issue like I did..
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Thanks. I'll take a look.
On a side note.... I can't get any sound from the device. I'm thinking now that it might be hardware related.
Sent from my SGH-I777 using xda premium
Sorry I'm a noob at all of this. Successfully rooted my phone today thanks to Honsoon2000's excellent tutorial and toolkit. Then I went to install Android Revolution, which appeared to go successfully and then after I flashed the kernel the phone wouldn't load and just hangs at the quietly brilliant screen. I followed Honsoon's tutorial to the T (or so I thought) and everything went perfectly until right at the end when I flashed the kernel. I can make it back to the bootloader screen though it says "failed to load usb master mode". I can still make it into fastboot and recovery mode...tried recovery, and the process seemed to go sucessfully, but the phone still wouldn't load after...tried reinstalling ARHD-- it's still on the sd card and the install procedure still goes off without a hitch, but the phone still won't load. I've searched around and tried everything I can, to no avail. Any help would be muchly appreciated, and I apologize in advance for being a noob wasting people's time.
Edit: For example, when I follow the steps outlined in the FAQ it asks me to enter the command 'fastboot flash boot boot.img' , but when I do it says 'error: cannot load boot.img'.
Edit 2: So I put my boot.img file from Android Revolution into the data directory of the rooting toolkit and was able to complete the above flashboot command. I was also able to install the ROM off my SD card...however the phone still hangs on the Quietly Brilliant screen...I can't even power the phone down...whenever I try it just reboots...frustrating...really hoping someone can help me...cheers.
Before you begin, make sure that the drivers for the One X+ are installed.
Place the boot image being used on the computer's hard drive.
Boot in to recovery and flash the ROM.
When that is done, boot in to bootloader and connect the phone to the PC via a USB cable.
If the phone isn't in fastboot mode already, use the volume keys to highlight the word "fastboot", then press the power button.
Now, there should be text at the bootloader screen that says "Fastboot USB".
Finally, use the toolkit or command line and flash the kernel with the fastboot command.
This should successfully flash the ROM and the kernel. Make sure you full wipe before flashing a new ROM. If you can't seem to get the new ROM booting, the final choice is to relock the bootloader and run a RUU.
Which phone version you do own? International or AT&T / TELUS?
Did you flashed the correspondant boot.img? Did you cleared the cache? ( fastboot erase cache)
I'm trying to run an RUU but it keeps saying the battery isn't charged enough to flash anything...and this after it's been plugged in all day. Oh dear I think my phone might be done...really sucks :/
Also, it won't let me power the phone down-- every time i try it shuts the phone off briefly and then opens back up to the bootloader screen.
Fixed thanks to sarcasticphoenix. Cheers.
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
jrockwell said:
OK so I've tried 3 times to flash a new ROM onto my phone (Android Revolution twice and Eleganzia once) using Honsoon's toolkit...I've followed every instruction to the T as far as I can tell and all 3 times the process has gone perfectly right until the end when I flash the kernel...after that when I reboot the phone it just hangs at the Quietly Brilliant screen. I know how to relock the bootloader, flash the custom rom and get my phone back...but I really want to know what I'm doing wrong so I can install a custom ROM. I know I'm using the right ROM for my phone and am wondering what gives. Being driven crazy here...any ideas what's going wrong here would be helpful. BTW on the last attempt right after I finished and the phone hung I went into the boot loader and followed the instructions in the FAQ for fixing a bootloop...still nothing.
Edit: Solved my problem-- I managed to successfully load eleganzia...the only thing i did differently the last time was flash the kernel BEFORE installing the ROM off the SD card.
Click to expand...
Click to collapse
That's usually what I do first, flash the kernel and then install the zip via recovery
Sent from my HTC One X+ using xda premium
Which kernel are you referring too? Actually there is one or two kernels available but only for the International version, not the AT&T/TELUS which you seem to have.
I strongly suspect that your boot looping was because you didn't flash the boot.img file correctly or not at all. And you don't seem to install the good ROM version for your phone.
Elegancia has two ROM versions one for International and one for AT&T/TELUS users.
ARHD is for International users.
Please read Q12 of the FAQ.
Lucky Thirteen said:
ARHD is for International users.
Click to expand...
Click to collapse
Lol...yeah I don`t know how I missed that. I ended up getting elegancia successfully flashed and loaded so all is well. In retrospect this was a good experience because there`s nothing like having to get yourself unforked from a bad situation to gain an understanding of what`s going on. Cheers.
I have a couple questions and since I`m not allowed to post yet in the elegancia thread I'll try in this thread first:
1) An elegancia question: Is there a way (widget) to toggle data roaming on and off in this ROM?
2) Is there a way to tweak settings (transparent pull down, selection of launcher etc.) without wiping and reflashing the ROM?
3) What are people's favorite launcher for that ROM? I tried Atom but it was just a guess because I hadn't heard of any of them. I like it so far but am curious about the others.
Hi all,
I'm trying to help someone fix their S4 that won't boot past the Verizon logo. I had rooted the phone probably a year and half ago but I never put a custom recovery or rom on the phone, as they mostly wanted to be able to use adblock, greenify, etc. The phone has been degrading slowly, lots of "SD card has been removed" errors, and now it simply won't boot past the Verizon logo. I have tried to boot into the stock recovery and clear cache with no luck. I don't want to wipe data if I can avoid it for now.
I was wondering if someone could point me to the proper CWM or TeamWin file and the best way to install it. I'm not sure if a custom recovery will even help me get it booted at this point but I figure I might have a little more luck over using the stock recovery. Any advice is appreciated, thanks.
Do you know what the phone's baseband is? Chances are it's not MDK so that means to CWM, TWRP, etc. Take out the battery, put it back in and then boot to download mode then try and flash a new tar in Odin.
I don't unfortunately. I rooted it about 1.5-2 years ago. I don't remember quite well but I don't think it's been updated since, I think I froze the update notification whenever that started popping up.
Flashing it in Odin will erase all data, correct? I don't know if I have another choice at this point, just curious.
Sounds like you need to odin the stock tar. Reroot and proceede from there. Yes it will wipe user data.
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
firstrival said:
I'm trying to get the user files off a phone with corrupted cache. When booted normally, it gets stuck on the white T-Mobile splash screen. When booting into recovery, I get an error about the cache and the phone restarts without loading into recovery. Screenshots attached.
I can get into download mode fine.
Using Odin to flash a custom recovery gives me the PASS message, but when I restart the phone, the stock recovery is still there with the same error message. I've tried TWRP and CWM.
I am hesitant to try flashing a custom ROM because I don't want to lose the data. The phone is not important, but the data is.
Click to expand...
Click to collapse
Dont try flashing a custom ROM on to the phone. Try flash the stock ROM through the lastest odin with the lastest drivers and let me know how that works out for ya. Unless that wipes the phone ( havent used it in quite some time) then I have no idea man.
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
firstrival said:
I tried flashing the T399UVUAMJ4 ROM throught Odin. It went through the entire process and rebooted, but nothing changed. Does this mean the bootloader is locked?
Click to expand...
Click to collapse
I'm not sure maybe want to ask someone else I'm not as experienced as some people on here. Sorry man goodluck
I hope someone can help you out. I would say your cache partition somehow got renamed but I'm not sure if thats possible and if so how to fix it. Maybe someone with ADB knowledge can help?
Also what TWRP were you trying to install? I've had problems when I tried to flash older versions
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
kireflow90 said:
okay so here is a site with the original firmware for the phone. It has both the t399 and the t399n for odin. It has them labeled so its not too confusing lol. http://forum.gsmhosting.com/vbb/f200/samsung-t399n-metro-pcs-firmware-here-1899016/
find the one for the t399, flash it with odin. this will fully restore your phone. HOPEFULLY it will be able to save the data. I know you said you did this before but I'm not sure if it was just system or everything like here.
Click to expand...
Click to collapse
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
firstrival said:
So I tried the T399 files. Flashed with no errors, but when it reboots everything is still the same. I've even tried flashing from another computer. Mind boggling!
Click to expand...
Click to collapse
Thanks for the quick reply. Its a shame to hear that it didn't work
How did you come to this? as to me it seems the partions have be modified hence why giving those errors I seen similar errors to when users change cache sizes which tends to brick device or from using incorrect pit files.
You never be able to recover data from flashing Odin may be slim chance by custom Rom thru recovery if was a bkup of original system and not selecting data your old data may conflict causing either bootloop or basically stuck on splash screen.
If you was ever able to best way to pull data from device would be thru adb may have a chance.
This phone belongs to a friend of a friend. They said they brought it to T-Mo because it hung up during boot. The store worked on it for a few minutes, but couldn't get it to boot up either. When I tried to go into recovery, they said the store already went into that screen too. They have since bought a new phone, but would like to get the photos off it if possible. They never had an SD card so it's still on the device.
At the moment, I can just go into download mode. I was hoping to flash a custom recovery so I might possibly be able to ADB from there since it won't load the stock recovery.
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
fulgorevinnie said:
I have a very similar issue but without "cache error messages". The phone (Samsung Galaxy Light with stock ROM and TWRP) just reboots no matter what I try to flash into it.
It does it while "drawing" the Samsung Logo animation (blue ring that gets created revealing the word samsung), so after the white wrintings of the phone name.
My attempts so far:
1. Flashed newer version of TWRP
2. Flashed CWM
3. Flashed two different versions of stock ROM (the original one and the one that T-Mobile released when upgraded to latest jelly Bean)
4. Flashed a custom ROM (Light ROM found here which is based on the stock one).
EVERY TIME the outcome was the same:
Phone reboots right after the phone name (written in white) while the Samsung animation starts. It just stops while the blue oval begins to appear. If I try to boot into recovery (via home/power/volume up combo) it shows the TWRP splash screen but it reboots right after and this happened even after I flashed (successfully according to Odin) CWM.
It really looks like I did nothing so far but I can assure it's not the first time I use Odin (4 different versions) to flash a custom recovery or a ROM. I did it successfully on other 4 different phones (all samsung).
On this same phone I did it the first time when flashed TWRP in order to root it via recovery.
I have no idea what to do next. I was thinking about using adb in order to wipe all the caches (dalvik included) but it looks like the phone can't be recognized unless I boot it into recovery mode (adb get-state returns "unknown") and I don't think I can do anything in Download mode which is the only mode I can enter apparently.
I was hoping someone here can help me to spare some money buying a new phone for my wife and tossing this one which is the best for its small size imho.
Thank you in advance to anyone interested in at least shading some light on what could have happened. This started to happen out of the blue and the last time I actively modified something (updating the recovery) was almost one year ago... It always worked like a charm until 4 days ago...
EDIT: To clarify: the reason why I posted here is because this looked like a problem the most similar to mine (boot loop or stuck at boot and can't enter either regular or recovery mode). I cannot create new posts due to my low "rank" yet... Please feel free to move this if you think it belongs to a separate thread.
Click to expand...
Click to collapse
ok so i read all that you have done which is basically everything i would of suggested to you other then could it be the battery may be faulty just random thought noticed you never mentioned trying kies you may have a chance with it beening detected as i see you can enter download mode so that help with odin also kies also have you tried firmware from here sam mobile here T399 or T399N OH2 lastest for tmo and OH3 for metro.
Try to only flash that thru odin i use 3.07 or 3.09 only difference is the pda button changes to AP .works perfect for me so i suggest it then returning back to stock recovery/firmware if it boots then awesome. then return to TWRP 2.8.4.0 beening lastest for this device also needed for CM12 also my projects for device current and future.
when using odin make sure that only “Auto Reboot” and “F. Reset Time” options are selected.
also just note when going into twrp release buttons as soon as you see logo otherwise it will continue to boot thru well happens to me when daydreaming lol.
also if your seeing this adb get-state returns "unknown" i believe installing kies may install the drivers for detection im not postive on that but im sure it something to do with missing the adb driver for device maybe another dev can confirm this ?
hopefully this may be of some help i keep on thread to see how the outcome goes
Thanks for the reply DJBoxer!
Regarding the battery it's a new one and I can confirm it's not a battery problem considering that the phone can stay in download mode and unplugged from any power source for very long times without turning off/rebooting and it never failed to keep the charge so far. I also tried with the old battery and the phone behaves exactly the same way.
I used 3 different versions of Odin (1.87, 3.07 and 3.09) with only “Auto Reboot” and “F. Reset Time” options selected and every time I got the PASS message even though the phone keeps rebooting after the first reboot once the procedure is terminated.
To clarify one thing : when I said "it shows the TWRP splash screen but it reboots right after and this happened even after I flashed CWM" I meant to point out that it looks odd to see the TWRP splash screen (even for just a few seconds) after I just flashed CWM and that makes me think that I'm really not flashing anything here...
Thank you very much for taking the time of posting the links and I actually didn't try with that latest OH2 version.
I am downloading it right now (it takes a while from sammobile) and I will keep you posted on the outcome.
I will try to flash it via Odin and I'll also try the latest version mentioned on sammobile (Odin3_v3.10.7).
Regarding Kies I wasn't able to have it recognize the phone. I may be missing something but I tried updating drivers and going through all the guided procedures with no luck... If you say it should recognize the phone right away while in download mode then something is amiss.
Could you please confirm that I should also be able to use adb commands with the phone connected via USB in download mode? Cause that doesn't look like the case either...
Thank you again and I'll give updates here about my last attempts.
Sorry for the late reply...
Nothing changed by the way...
I am about to send the phone back to the seller who told me they'll try to fix it. Let's see how it goes.