Hi, I've a big problem with the Newt's Hybrid v2.0.0 ROM.
This morning, my battery was drained so I pluged it on sector. When the battery was full, il tried to boot and It freeze on the beats logo
I'm on the v3.0.0 beta, but I had the same issue on v2.0.0.
Any solution please
EDIT: I think this is because Funky Kernel isn't supported by this ROM...
Can you boot into bootloader? If so, flash the proper kernel in fastboot and you should be able to boot if the kernel is the issue.
I flashed the proper kernel, I waited the battery drains and it's boot perfectly. Thanks :victory:
Great!
I see in your sig now that you're s-on. So anytime you flash a ROM you need to flash the kernel for it right after so it will boot properly.
Related
Ok, here's a story.
Firstly, I switch Fw from 431 to 587 using Flashtool
I've been using Adv Stock Kernel of Sirkay for both of this Rom.
One day, I'm fed up with the Adv Stock Kernel
I decided to switch to xRay 9.587-c
It boot passes the kernel screen into boot animation
But it stuck at my boot animation screen
Stuck
Stuck
Stuck
....(15 minutes)
Stuck
I plugged off the battery, trying to reboot, it boot, pass the kernel screen
and the same thing repeats again
and
again
I reflashed 587 rom again, it boots successfully, switched kernel, boots successfully again, so I decided to push some of my mod into the phone via cwm recovery
Connected to the Pc, I reboot, and it hangs again, this time, stuck at kernel screen, can't go into recovery
so I reflashed the fw 587 via flashtool again, it boots successfully with custom kernel
tried my framework mod, it won't boot, revert back to original framework mod, boot stuck still
so I reflashed fw 587 again, it works, but I'm very careful now
#Suppose that fota in flashtool should be unchecked, right?
#is my trim area damaged????
I need desperate help, guys and devs, I'm so afraid of rebooting now. LOL
I Was On Criskelo 18 Then I Decided To Go To Jelly Bam But
After Flashing I Found That Wifi Signals Was Not Stable (Go Up And Down Randomly) Besides Every Time I Change UI The Phone Went To Boot Loop Until I Remove The Batterry And Put It Again
Battery Someone Said That Happened Because I Flashed Over JB ROM
So I Flashed Check ROM 4.5 (Resurrection By Odin) But The Problem Still There
Then I Flashed Ultima ROM 7.1 But When I Went To Recovery Mode (CWM 6.0.1.2 Touch) I Found That Ultima.zip Is Not Showen I Decided To Remove And Put It Again From My Computer
After Installing The Phone Was Not Responding Until I Removed The Battery Then The Mobile Worked But Wifi Still Not Stable Like When I Was On Criskelo
What I Want To Say What Happened To Wifi And Why The Phone Didn't Respond Until I Removed The Battery
Sorry For The Long Story
if you think that you have problem with WIFI then you should change your kernel cause it depends on kernel not the ROM
komsa said:
if you think that you have problem with WIFI then you should change your kernel cause it depends on kernel not the ROM
Click to expand...
Click to collapse
WiFi Was Stable On Stock Kernel Until I Flashed CM10 Kernel Now I Am On Latest Stock Kernel Modem And The Problem Still There Do You Think I Should Flash Custom Kernel? And What About CWM? Thank You For Quick Responding
please forgive me if this has been asked before. i've tried searching but can't seem to find any fix. my phone was working great but i wanted to try a new rom since i was getting bored. my mistake.. anyway i have CWM recovery on my atrix and it worked good. i've flashed roms before.i was flashing between Neutrino ROM V2.9 and V3 trying to see if i could get the CMsettings to work on V3 without crashing. anyway after a while i gave up and decided to full wipe and just flash V2.9. after the ROM flash i reboot the phone but got a boot loop so i pulled the batter and tried to boot into recovery to wipe and flash again but when i select Android Recovery it just hangs at a black screen. what happened? can it be fixed quickly because my battery before the final flash was about 30%
BTW.. i've tried to reflash the recovery through fastboot and my compute the way i did it when i fist unlocked my phone and flashed the recovery but still no luck... still hang at blank screen after selection Android Recovery
never mind i fixed the problem.... had to flashed a different recovery (in this case TWRP) and then flash back to CWM recovery. idk the reason why but it worked and now my phone is back on and just in time with only 5% battery life left after all the trial and error flashing..
ok i figured out what caused my recovery to crash in the first place. its the gapp addon. when i flash that zip and reboot i get a boot loop and my recovery is gone. first i though it was the zip file that was damaged so i re-downloaded the gapp addon from Neutrino ROM V2.9 fourm but now chrome says the zip is infected so ok i went and download the full gapp addon for CM7 rom and that flashes without crashing my recovery but when the phone restarts i can't access half the gapp like market and gmail and a few others. they show that they are installed in Manage Applications but they don't show up in the app drawer.. whats the problem now? i've never had this problem before
I have a SII i777. I have been testing roms on the phone sense I bought it. I was testing C-ROM for Galaxy S2! [Android 4.4.4/Floating Multi-Window]. I was letting my phone charge. When I went to check the time I noticed it was in a boot loop. I booted into recovery formatted the normal stuff still boot loop. I ran Mr-Cook script rom whip, kernel whip reapplied the rom then the Gapp and then the shift kernel. Still boot loop. Please help i must be over looking something.
I suggest installing one thing at a time to isolate the point of bootloop.
Install i777-omni/slim/shostock (no gapps, no custom kernel).
-if bootloop, flash stock distribution as final test (a weak/damaged battery can cause a bootloop)
-if no bootloop, then wipe again and add gapps, but still no custom kernel
-if no bootloop, then add custom kernel
-etc.
-Cyril
Needle_Twist said:
I have a SII i777. I have been testing roms on the phone sense I bought it. I was testing C-ROM for Galaxy S2! [Android 4.4.4/Floating Multi-Window]. I was letting my phone charge. When I went to check the time I noticed it was in a boot loop. I booted into recovery formatted the normal stuff still boot loop. I ran Mr-Cook script rom whip, kernel whip reapplied the rom then the Gapp and then the shift kernel. Still boot loop. Please help i must be over looking something.
Click to expand...
Click to collapse
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Don't flash a different kernel, just try RR first, boot and make sure it works.
Once that is done, then you can try flashing the kernel and see if everything works. If it doesn't, you have your answer.
Most custom ROMs are also builded just for their kernel so if u flash custom kernel then there is chance that ROM will not work as u expected. Just think about it when you are installing a custom kernel.
Today I did flash lite mode rom . It boots up but touch was not working...nothing was flashed even gapps.
Sometimes the recovery twrp too does not work.,touch lost. Now i suspect something wrong with the hardware.
But no issues with miui roms...Thats what makes me wonder
did you do it on the computer?
sibikallikkat said:
I am facing a strange issue..I unlocked the bootloader the official way. Installed RR rom latest. Flashed Agni kernel. It was working fine.
After I switched off the device and turned on I noticed that touch is not working... System reboot to normal but touch is fully gone..
I had to flash fastboot rom edl mode to bring back the system to normal...
What might be the reason for loss of touch... Anyone please help....
Click to expand...
Click to collapse
You may want to try installing Radon Kernel. I've got an aftermarket display which also didn't work with a custom rom (Lineage OS), but after flashing Radon Kernel it worked flawlessly. You may want o try Radon 5.0 as I'm having trouble with 5.1.