Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
If you can get in to recovery restore the backup you should have made before you installed the rom. can you get in to download mode?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
Hey, you can enter download mode right? if yes you can flash stock firmware via odin or if you can have a access to recovery. how about to wipe data, cache and dalvik cache. it might or might not working. Have a try.
Yes, I can access download mode. So I should just flash the original firmware for the country i live in with odin by just putting it in the bootloader section and that's it?
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Jokerbest2006 said:
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Click to expand...
Click to collapse
chill. are you sure your downloaded firmware is not corrupted? put the .tar file at pda. i suggest you to look at ultimate guide there. it will assist you from A-Z
The file is not corrupted, it's download from sammobile.com, that's the thing. I will download it again and try again maybe it will work. Thanks
So, what to do in case the flashing thing doesn't work on my phone? maybe specialised service center would help or something, pls pls i need solutions!!!
Nono, don't put it in the bootloader field, put it in PDA field.
Seems like a driver issue, reinstall drivers and uninstall Kies, try a different cable, port, OS, pc
Jokerbest2006 said:
The file is not corrupted, i
How do you know its not corrupted ???
Information reads as file corrupt or user not following instructions .
Service
Cheapest method is to start with a JTag service .
jje
Click to expand...
Click to collapse
About setup connection (I'M NOT SURE !!) Insert your sd card .
I had this problem before with my old Galaxy Y . (The same problem 100%)
.......
Guys I need a little help ... my friend's phone (SGS3) can't boot , it just shows the samsung logo (logo begore bootanimation) .
can't enter recovery , but can enter download mode .
I tried to flash it with odin and it success ,, but the phone doesn't boot ??????
As far as I know the problem is with bootloaders . How to flash them ??
I'm very new with samsung , in LG devices we use a completely other tools .
Thanks on advance .
#------------------------------------------
echo "Sender.product.model=LG-P880" # (O4X) .
if [ $thanks -eq $pressed ] ; then
thanks_meter=$((${thanks_meter} + 1)) ; fi #Press it
I'd the flash was successful then boot to stock recovery and do factory reset, then it should boot
Note that this will wipe data AND internal sd card
Ok so i tried again to flash the stock jelly bean back and in odin it shows me like this:
<OSM> I9300XXELLA_I9300OROELL1_I9300BVELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
The part where it says there's no pit partition worries me most. What should I do in this case, I really want to fix my phone? Should I flash the software again and tick "Re-partition''?
May help.
http://forum.xda-developers.com/showthread.php?t=1796062
jje
Related
Hey guys
I got the notification that a new update is available for my stock GT-I9300 (Vodafone New Zealand) a few days ago. When I clicked on install it complained because I was on mobile data and so I decided to wait until I am at home. But when I got within range of a wifi it must have automatically downloaded and installed the update, because the next time I pulled the device out of my pocket it was stuck at the initial boot screen.
I have since tried to do a firmware recovery through Kies, which downloaded the firmware and then failed to install it saying that it does not know the device or something along those lines (I unfortunately did not save a screenshot of the exact message). Then I tried Odin, which simply fails with the log output below. I know that this is a ROM for the UK, but I haven't found a ROM for NZ yet and thought that it might work anyway.
The status printed when I go into the recovery mode is a bit strange:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Why is there no product name and why is the system status "custom"? I have only had the phone for three weeks and I have not rooted or flashed it yet.
Any suggestions would be much appreciated
Odin output:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Nuld said:
Hey guys
I got the notification that a new update is available for my stock GT-I9300 (Vodafone New Zealand) a few days ago. When I clicked on install it complained because I was on mobile data and so I decided to wait until I am at home. But when I got within range of a wifi it must have automatically downloaded and installed the update, because the next time I pulled the device out of my pocket it was stuck at the initial boot screen.
I have since tried to do a firmware recovery through Kies, which downloaded the firmware and then failed to install it saying that it does not know the device or something along those lines (I unfortunately did not save a screenshot of the exact message). Then I tried Odin, which simply fails with the log output below. I know that this is a ROM for the UK, but I haven't found a ROM for NZ yet and thought that it might work anyway.
The status printed when I go into the recovery mode is a bit strange:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Why is there no product name and why is the system status "custom"? I have only had the phone for three weeks and I have not rooted or flashed it yet.
Any suggestions would be much appreciated
Odin output:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
download original firmware for galaxy i9300 and flash through odin
that will take you through
or download any rom ZerOne or foxhound they are really nice roms and flash via cwm
vegeta1 said:
download original firmware for galaxy i9300 and flash through odin
that will take you through
or download any rom ZerOne or foxhound they are really nice roms and flash via cwm
Click to expand...
Click to collapse
I am trying to install the original firmware through Odin, but I always get the error message shown at the end of my original post. When I try it a second time directly after it failed, then it does not complain about the PIT but instead fails to connect to the COM port:
<ID:0/011> SetupConnection..
<ID:0/011> Can't open the serial(COM) port.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone through the process of taking out the battery, reinserting it, going into download mode, connecting it to all USB ports on my laptop and trying to flash several times now, always with the same result
I am currently downloading another ROM (I9300XXALF6_I9300ITVALF1_ITV). Maybe that'll work...?
Nuld said:
I am trying to install the original firmware through Odin, but I always get the error message shown at the end of my original post. When I try it a second time directly after it failed, then it does not complain about the PIT but instead fails to connect to the COM port:
<ID:0/011> SetupConnection..
<ID:0/011> Can't open the serial(COM) port.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone through the process of taking out the battery, reinserting it, going into download mode, connecting it to all USB ports on my laptop and trying to flash several times now, always with the same result
I am currently downloading another ROM (I9300XXALF6_I9300ITVALF1_ITV). Maybe that'll work...?
Click to expand...
Click to collapse
Doesn't look like your computer found your phone, remove/reinstall the USB drivers. You can use KIES, click troubleshoot connection, it will reinstall them.
Hope that helps,
-CC
P.S> Make sure ODIN is not open when you run KIES and make sure KIES isn't open when you run ODIN.
clockcycle said:
Doesn't look like your computer found your phone, remove/reinstall the USB drivers. You can use KIES, click troubleshoot connection, it will reinstall them.
Hope that helps,
-CC
P.S> Make sure ODIN is not open when you run KIES and make sure KIES isn't open when you run ODIN.
Click to expand...
Click to collapse
Odin says "<ID:0/011> Added!!" (or some other port of course) whenever I connect the phone, doesn't that mean that it detected the phone?
I actually did the troubleshoot connection in Kies yesterday and it reinstalled the driver. I have since removed Kies (not the driver) from my computer, as I thought that this might be the reason why Odin fails.
Ok I am getting really desperate, I have spent a large part of the weekend trying to get this to work and still no luck. Any further suggestions would be highly appreciated
I have re-installed the USB driver a few times now and Kies is not installed to make sure that there are no conflicts between ODIN/Kies. I have also found a ROM for Vodafone NZ (I9300XXALE8_I9300VNZALE4_VNZ) which is where I got the phone.
ODIN detects when I plug the phone into my computer, but fails with the following:
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What is the cause for this error and do I need a PIT file and do a re-partition to fix it?
Is it normal that when in download mode, the product name shown on the phone screen is empty?
Thanks!
Your partition table is corrupted. No point trying to fix.
Quickly send to samsung to reflash your phone.
So there is no way I can fix this myself (without risking to make things worse)?
I am not a happy Samsung customer right now, all this time wasted because I installed an official over the air update and who knows how long it'll take to get it fixed...
Thanks for your replies.
Nuld said:
So there is no way I can fix this myself (without risking to make things worse)?
I am not a happy Samsung customer right now, all this time wasted because I installed an official over the air update and who knows how long it'll take to get it fixed...
Thanks for your replies.
Click to expand...
Click to collapse
You are in a position now where further repairs by yourself are even more likely to end up with no warranty .
Phone broke during official update return under warranty .
Flashing other firmwares risks invalidating warranty .
jje
guys i have rooted galaxy s3 i was trying to instal chainfire 3d to my phone just installed and pushed the button that says install driver and restart it istalled drivier and restarted but phone stucks at galaxy s3 logo how can i go to recovery whiout opening the phone so i can flash new rom or something help me out please i am flashing recovery to phone but cant open it
archeuscaine said:
guys i have rooted galaxy s3 i was trying to instal chainfire 3d to my phone just installed and pushed the button that says install driver and restart it istalled drivier and restarted but phone stucks at galaxy s3 logo how can i go to recovery whiout opening the phone so i can flash new rom or something help me out please i am flashing recovery to phone but cant open it
Click to expand...
Click to collapse
Off the phone. Then press power button + volume up + home button
Sent from my GT-I9300 using xda app-developers app
Dear all there is a good news for all of you about SIII product name blank now it can be consider under warranty as Samsung policy.
I have never rooted my phone, always used official updates. Upgraded to Android 4.1.1 last night and after few hours my phone just stuck wiht the "Samsung Galaxy S3 startup logo". The phone wont reboot at all. I tryed to factory reset (volume up + home + power), wont work.. one time it tryed to do something and failed. I can boot to odin download menu and i tryed to reset to official stock firmare and it says something about partition corrupted or broken. After that i tryed again with the new partition option, it failed again. Is there anything i can do to get this phone working again?
aeinola said:
I have never rooted my phone, always used official updates. Upgraded to Android 4.1.1 last night and after few hours my phone just stuck wiht the "Samsung Galaxy S3 startup logo". The phone wont reboot at all. I tryed to factory reset (volume up + home + power), wont work.. one time it tryed to do something and failed. I can boot to odin download menu and i tryed to reset to official stock firmare and it says something about partition corrupted or broken. After that i tryed again with the new partition option, it failed again. Is there anything i can do to get this phone working again?
Click to expand...
Click to collapse
Send it back for repair if you've never routed or anything. It can likely be fixed by routing and whatnot but if you've never done it, why risk it.
Parva4 said:
Send it back for repair if you've never routed or anything. It can likely be fixed by routing and whatnot but if you've never done it, why risk it.
Click to expand...
Click to collapse
Send it for repairs and wait for several weeks to get it back? Very tempting. :cyclops: Lets call that plan B.
If i can do something to wake this baby up today or tomorrow i'll take it.
It sounds like you somehow softbricked your phone without even rooting it lol.
Anyway, if you can go into ODIN download mode, you might wanna try rooting the phone to see if it works. Cos once the phone's rooted, you can easily flash a stock ROM to save it. If you're worried about voiding the warranty, you can unroot the phone after everything's done.
Instructions for unrooting: http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-galaxy-s3-i9300/
Hope this helps!
chunghanjie92 said:
IAnyway, if you can go into ODIN download mode, you might wanna try rooting the phone to see if it works. Cos once the phone's rooted, you can easily flash a stock ROM to save it. If you're worried about voiding the warranty, you can unroot the phone after everything's done.
Click to expand...
Click to collapse
I did try that and it did not work. Maybe i did something wrong? Dont know... Im pretty sure the problem is with broken partition. I had the Auto Reboot, Re-Partition and F. Reset Time checked. Got file for PIT and got file for PDA. It just wont work. Odin says every time FAILED!
Do not use pit or repartition unless you know what you are doing.
jje
Sent from my GT-I9300 using xda premium
aeinola said:
I had the Auto Reboot, Re-Partition and F. Reset Time checked. Got file for PIT and got file for PDA. It just wont work. Odin says every time FAILED!
Click to expand...
Click to collapse
NEVER CHECK RE-PARTITION trololololo .... and never use PIT unless you are know what you doing.
Wow! These "never use PIT unless you are know what you doing"-comments are really helpful. Thank you guys! :good:
Follow the instructions on this site:
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3/
The site tells you how to root a phone (look at the picture to see what you need/don't need to check; usually all you need to check is Auto-Reboot and nothing else)
After the phone's rooted you can download a ROM from this site http://samsung-updates.com/device/?id=GT-I9300 and flash it into the phone using the same method you flashed the file to root your phone
Thanks for the help. Odin says: "There is no PIT partition" and FAILS.
So i NEED to Re-Partition, any help would be appreciated.
I try to Re-Partition and here is what Odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_ROOT_DEODEX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The files (including mx.pit) is from these forums. What should i do?
aeinola said:
I try to Re-Partition and here is what Odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_ROOT_DEODEX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The files (including mx.pit) is from these forums. What should i do?
Click to expand...
Click to collapse
Same thing for me, and I'm stuck with this problem for 2 months now!!!
I read that for some reason unknown, some S3 got these fuc*** motherboards!!!
If u can solve this without samsung service center, please post!!!:good:
Of course you can manage it without Samsng Service center, if you want.
The procedure is:
1. download to PC the I9300 Service Manual;
2. buy motherboard;
3. replace it by yourself.
How it started:
A pop message appears asking to format the phone, I accidentally hit okay, after 10 seconds I realized it, I immediately stopped the process by hitting the back button which caused my phone to go blank screen and freeze. so I pressed and hold power button, and the phone shuts off turns back on then it get stuck on the Samsung Logo/screen and won't go through no matter how long I wait.
So with that said I may have corrupted my Operating System so I went online to try to look for solutions to recover my Note.
i have downloaded Odin v1.85 and v3.07
i have downloaded the latest OS Jellybean from samsung:
(KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5)
i have downloaded the latest USB software and currently using the original cable that came in the box.
I open Odin v1.85 on my Windows 7 Ultimate Desktop
i put my phone in Odin download mode (power + volume down)
I pressed volume up
I plugged in my phone to the USB
I clicked start
and then I get stuck
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> amss.bin
<ID:0/005> NAND Write Start!!
Please see my screenshot as attachment.
Please help!
Thank you!
http://forum.xda-developers.com/showthread.php?t=2240096
okay thank you i am reading it now.
i will report back with the outcome.
thanks once again.
okay before i go further if you look at my attachment
first box says "MODEM"
is this normal?
i saw a vid on youtube shows "SYSTEM"
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
What it says is what yrs currently flashing. That's just where it's getting stuck
studacris said:
What it says is what yrs currently flashing. That's just where it's getting stuck
Click to expand...
Click to collapse
so is there any solution to this?
i tried it over again on another PC (Laptop)
i still get the same error where I get stuck:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
stuck here... no matter how long I wait i have been up all day long and found no solution online
I will send $10 paypal donation to the website or to somebody that can help me revive my phone back to normal.
i am that desperate now. i have been up for almost 12 hours trying everything i could.
i am currently looking for a .pit file for Samsung Galaxy Note AT&T SGH-i717 cannot find it anywhere!
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
studacris said:
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
Click to expand...
Click to collapse
Yes: KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5
i'll download an older version (ice cream sandwich)
i have not tried twrp.tar nor custom ROM
can you point me to a link to DL it?
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
studacris said:
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
Click to expand...
Click to collapse
tried it i'm still stuck.
please see screenshot
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
sinasiadat said:
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
Click to expand...
Click to collapse
yes
studacris said:
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
Click to expand...
Click to collapse
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
I meant cleaning the port on the device itself
jeffcarp003 said:
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
Click to expand...
Click to collapse
what is device manager showing you when your phone is plugged in? what does it enumerate as . .
do you have a copy of QPST? (you work for qualcomm right?)
I Hard Bricked Galaxy note i7i7
Hello
I was flashing a kernel in order for this jellybam rom to work.So when i put my phone into custom recovery mode and installed the custom kernel through custom recovery a quick message appeared and my phone just shut off. My phone hasn't turned on since and i have no clue to unbrick my phone. I talked to a guy at att and he said that he unbricked his hard bricked phone without a jig or a jtag is that possible?
jeffcarp003 said:
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
Click to expand...
Click to collapse
Sounds like corrupted download. Look for another source and let me know how it goes.
Sent from my XT894 using Tapatalk
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Which version of ODIN did you use? What kind of file(s) were you trying to flash?
Sent from my GT-I9300 using Tapatalk
I'm not sure but think it was Mobile Odin 3.65 and I was trying to flash CWM touch from xda.
Additionally, I think my battery charge may now be low after many attempts to recover it but will that matter bearing in mind I'm using Odin on my PC and the phone is connected to the PC by USB cable?
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
JJEgan said:
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
matrixmainframe said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
Click to expand...
Click to collapse
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
JJEgan said:
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
Click to expand...
Click to collapse
Kies is not installed on my computer and I have tried Odin versions 1.83, 1.85, 3.04, 3.06, 3.07 and 3.09.
I have also tried 'Samsung_USB_Drivers_1.5.27.0.exe' and 'SAMSUNG_USB_Driver_for_Mobile_Phones.exe' and remembering to uninstall then reboot and then install.
On one occasion it got as far as (can't remember the exact words) "Get PIT Mapping" but then just stopped there.
I cannot believe I have done anything other than corrupt the CWM recovery because all I did was try to flash CWM Touch and as soon as I pressed OK the screen went black with the word "Samsung Galaxy SIII GT-I9300". Those words just stay there because since then I can't switch the phone off. I thought that if I just reflashed CWM via Odin on my computer I would be able to get back into recovery mode and just restore my backup.
Appears I am mistaken and have ruined a very new and vey expensive phone.
The only other thing I seem to recall is that before I tried the Mobile Odin flash the battery was below 50% charge but I'm not sure if that's relevant?
This is usually a wrong file flash symptom .
JJEgan said:
This is usually a wrong file flash symptom .
Click to expand...
Click to collapse
Do you mean I'm trying to flash something I shouldn't?
Initially I tried to flash CWM Recovery but then decided just to try and get it back the way it was by trying to flash Android 4.1.2 again.
The file I have been using is "KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5" which I believe is from Sammobile and which is, I believe again, the ROM that the Galaxy S3 comes pre-installed with. Do you think it worthwhile me trying some other ROM?
I have been doing a lot more web research and some say that the battery charge should be more than 80%. Does this matter?
Won't the battery have been charging all the while the phone was plugged into into the Computer via the USB lead?
If I buy a separate charger and charge my battery to 100% do you think the Odin reflash will work then?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
llcoolveer said:
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
Click to expand...
Click to collapse
Nice to know I'm not alone but sorry you're having the same problem. Have sat down to do some more web searching and will let you know if I find a solution
Service centre new motherboard .
JJEgan said:
Service centre new motherboard .
Click to expand...
Click to collapse
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
llcoolveer said:
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
Click to expand...
Click to collapse
Please can you tell me what is "OG Recovery"?
Thanks
matrixmainframe said:
Please can you tell me what is "OG Recovery"?
Thanks
Click to expand...
Click to collapse
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
llcoolveer said:
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
Click to expand...
Click to collapse
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
matrixmainframe said:
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
Click to expand...
Click to collapse
I couldn't also....only when my battery was full charged....:good:
Succes....
The end
Okay, I started this thread so will end it now as follows:
1 Thank you to all those who offered help/advice/suggestions.
1a Some people do not read posts properly because even though I had specifically stated that I could not get into recovery mode some people proceeded to tell me to go into recovery mode and restore my rom.
2 Whilst I have recovered the full use of my phone I can no longer root it but that's ok because at least I have a phone that is comparable to the vast majority who choose not to root.
3 I will explain how I rescued it but obviously I don't really understand what the result is other than a usable phone so please don't copy.
4 Whilst I have no doubt one could damage a motherboard, that could only be done with very specialist software that most people would not have so the advice of some that I needed a new motherboard was ill informed. If you don't know the answer don't offer an unhelpful answer. Recommending a new motherboard is like a motorist taking his car into a garage with a blown fuse and the mechanic saying the only cure is a new car.
5 After a lot of research I found one lone website that explained that from July 2013 Samsung introduced a change to their ROMs which introduced an efs 2 file. Additionally it appears that once you have flashed/upgraded to an efs2 ROM you cannot then go back to an efs ROM.
6 This is above my understanding but I do know I did go from efs to efs2 and when I then encountered a problem I thought it a good idea to go back to my original (efs) ROM which I now believe caused my problem.
7 I did not know if I had found the answer but as I believed my phone was a paperweight at that point anyway I had nothing to lose and downloaded the GT-I9300.pit file and flashed with repartition selected. I then flashed Android 4.3 knowing it would be an efs2 ROM and my phone is now working again.
8 However, although my phone is now working again, I find that I cannot install a custom recovery nor can I root the phone but that is a small price to pay to have a brand new S3 working again.
9 Whilst it may not be wise to mess about with the pit file, it seems nothing can be lost to give it a go because even if it doesn't work you can still go for the new motherboard option happy in the knowledge you have tried everything.
10 I may start a new thread for advice on that matter but for the time being I'm just relieved to have my phone back and I stress again that it did work for my specific problem and whilst it might work for you please only do it knowing it may not work for your problem.
Hello, and excuse my poor English.
I got my hands over a white S3 GT-I9300 running 4.1.2 (I9300XXELLA), the phone was suffering some annoying failures (certain built-in apps crashes after the keyboard is displayed and the phone app dial freezes after you press the call button thus the device make the call), did the wipe/data&cache, factory reset using the settings menu and OTA updates, this last one keeps saying the phone couldn't connect to check updates after several wipes/attempts.
So I followed this tutorial www[dot]android[dot]gs/install-official-xxugna8-android-4-3-jb-on-galaxy-s3-i9300/ (pretty much the same procedures as I re-flashed one of my previous phones, a Galaxy S Duos so I was kinda confident) but instead of the XXUGNA8 update I downloaded the Argentinian variant I9300UBUGNK1_I9300UVOUGNK1_ARO, followed all the steps in the tutorial and ODIN flashed successfully, the phone insta-rebooted for less than one second and stuck there (always rebooting in loop, showing the "Samsung Galaxy S3 GT-I9300" logo for less than one second), tried pulling out the battery, no luck. I can't access the recovery either but can enter in download mode. Also tried the KIES method but after asking the S/N it says "the model information that you have entered cannot be verified, the device initialization cannot proceed."
Tried to flashing it again using the same steps and files but got a NAND write error once and I stopped after that, now I am downloading the XXUGNA8 version at 50kb/s from samsung-firmware page since I started getting a 502 bad gateway error from sammobile's page.
What did I wrong? Can someone point me the necessary steps to repair this phone if there is a fix?
Here's the re-attempt log from ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNK1_I9300UVOUGNK1_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it appears as follows:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Any help would be more than welcome.
Regards.
I'm not a robot
dckmnn said:
Hello, and excuse my poor English.
I got my hands over a white S3 GT-I9300 running 4.1.2 (I9300XXELLA), the phone was suffering some annoying failures (certain built-in apps crashes after the keyboard is displayed and the phone app dial freezes after you press the call button thus the device make the call), did the wipe/data&cache, factory reset using the settings menu and OTA updates, this last one keeps saying the phone couldn't connect to check updates after several wipes/attempts.
So I followed this tutorial www[dot]android[dot]gs/install-official-xxugna8-android-4-3-jb-on-galaxy-s3-i9300/ (pretty much the same procedures as I re-flashed one of my previous phones, a Galaxy S Duos so I was kinda confident) but instead of the XXUGNA8 update I downloaded the Argentinian variant I9300UBUGNK1_I9300UVOUGNK1_ARO, followed all the steps in the tutorial and ODIN flashed successfully, the phone insta-rebooted for less than one second and stuck there (always rebooting in loop, showing the "Samsung Galaxy S3 GT-I9300" logo for less than one second), tried pulling out the battery, no luck. I can't access the recovery either but can enter in download mode. Also tried the KIES method but after asking the S/N it says "the model information that you have entered cannot be verified, the device initialization cannot proceed."
Tried to flashing it again using the same steps and files but got a NAND write error once and I stopped after that, now I am downloading the XXUGNA8 version at 50kb/s from samsung-firmware page since I started getting a 502 bad gateway error from sammobile's page.
What did I wrong? Can someone point me the necessary steps to repair this phone if there is a fix?
Here's the re-attempt log from ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNK1_I9300UVOUGNK1_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it appears as follows:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Any help would be more than welcome.
Regards.
Click to expand...
Click to collapse
Hey brother I also had similar problem today midnight here in india . and i also tried several methods to restore my phone.
i tried kies also but but it required full rom package to download ,as my internet speed is slow I tried other method and it worked. I am very happy now :victory:
just connect your GT-I9300 in download mode. use odin 3.07. download CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file that we normally use for rooting. Select pda in odin select CF-Auto-Root-m0-m0xx-gti9300.tar.md5 and click start.
Its just recovery related problem. my entire data is there as it is in my phone.
Hit thanks If I helped you
I'll try it as soon as I can, and let you know if it worked.
For now thanks for the help!
dckmnn said:
I'll try it as soon as I can, and let you know if it worked.
For now thanks for the help!
Click to expand...
Click to collapse
I flashed back to stock yesterday after 2 years of Custom - just felt like it!!
I too got stuck on Samsung logo immedidately after my carrier logo appeared for a couple of seconds.
Tried reflashing again twice - again with Odin - same result
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
homer timpson said:
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
Click to expand...
Click to collapse
That though is written in the sticky's.
homer timpson said:
I flashed back to stock yesterday after 2 years of Custom - just felt like it!!
I too got stuck on Samsung logo immedidately after my carrier logo appeared for a couple of seconds.
Tried reflashing again twice - again with Odin - same result
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
Click to expand...
Click to collapse
Sorry for the late response! The phone wasn't able to enter recovery, only download mode.
Another not robot here
[UPDATE]
I sold the phone "as is", I got it cheap and sell it almost at the same price so any mod can mark this thread as "Solved".
Easy come, easy go they say.
Regards.