How it started:
A pop message appears asking to format the phone, I accidentally hit okay, after 10 seconds I realized it, I immediately stopped the process by hitting the back button which caused my phone to go blank screen and freeze. so I pressed and hold power button, and the phone shuts off turns back on then it get stuck on the Samsung Logo/screen and won't go through no matter how long I wait.
So with that said I may have corrupted my Operating System so I went online to try to look for solutions to recover my Note.
i have downloaded Odin v1.85 and v3.07
i have downloaded the latest OS Jellybean from samsung:
(KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5)
i have downloaded the latest USB software and currently using the original cable that came in the box.
I open Odin v1.85 on my Windows 7 Ultimate Desktop
i put my phone in Odin download mode (power + volume down)
I pressed volume up
I plugged in my phone to the USB
I clicked start
and then I get stuck
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> amss.bin
<ID:0/005> NAND Write Start!!
Please see my screenshot as attachment.
Please help!
Thank you!
http://forum.xda-developers.com/showthread.php?t=2240096
okay thank you i am reading it now.
i will report back with the outcome.
thanks once again.
okay before i go further if you look at my attachment
first box says "MODEM"
is this normal?
i saw a vid on youtube shows "SYSTEM"
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
What it says is what yrs currently flashing. That's just where it's getting stuck
studacris said:
What it says is what yrs currently flashing. That's just where it's getting stuck
Click to expand...
Click to collapse
so is there any solution to this?
i tried it over again on another PC (Laptop)
i still get the same error where I get stuck:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
stuck here... no matter how long I wait i have been up all day long and found no solution online
I will send $10 paypal donation to the website or to somebody that can help me revive my phone back to normal.
i am that desperate now. i have been up for almost 12 hours trying everything i could.
i am currently looking for a .pit file for Samsung Galaxy Note AT&T SGH-i717 cannot find it anywhere!
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
studacris said:
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
Click to expand...
Click to collapse
Yes: KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5
i'll download an older version (ice cream sandwich)
i have not tried twrp.tar nor custom ROM
can you point me to a link to DL it?
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
studacris said:
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
Click to expand...
Click to collapse
tried it i'm still stuck.
please see screenshot
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
sinasiadat said:
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
Click to expand...
Click to collapse
yes
studacris said:
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
Click to expand...
Click to collapse
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
I meant cleaning the port on the device itself
jeffcarp003 said:
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
Click to expand...
Click to collapse
what is device manager showing you when your phone is plugged in? what does it enumerate as . .
do you have a copy of QPST? (you work for qualcomm right?)
I Hard Bricked Galaxy note i7i7
Hello
I was flashing a kernel in order for this jellybam rom to work.So when i put my phone into custom recovery mode and installed the custom kernel through custom recovery a quick message appeared and my phone just shut off. My phone hasn't turned on since and i have no clue to unbrick my phone. I talked to a guy at att and he said that he unbricked his hard bricked phone without a jig or a jtag is that possible?
jeffcarp003 said:
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
Click to expand...
Click to collapse
Sounds like corrupted download. Look for another source and let me know how it goes.
Sent from my XT894 using Tapatalk
Related
Hey guys
I got the notification that a new update is available for my stock GT-I9300 (Vodafone New Zealand) a few days ago. When I clicked on install it complained because I was on mobile data and so I decided to wait until I am at home. But when I got within range of a wifi it must have automatically downloaded and installed the update, because the next time I pulled the device out of my pocket it was stuck at the initial boot screen.
I have since tried to do a firmware recovery through Kies, which downloaded the firmware and then failed to install it saying that it does not know the device or something along those lines (I unfortunately did not save a screenshot of the exact message). Then I tried Odin, which simply fails with the log output below. I know that this is a ROM for the UK, but I haven't found a ROM for NZ yet and thought that it might work anyway.
The status printed when I go into the recovery mode is a bit strange:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Why is there no product name and why is the system status "custom"? I have only had the phone for three weeks and I have not rooted or flashed it yet.
Any suggestions would be much appreciated
Odin output:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Nuld said:
Hey guys
I got the notification that a new update is available for my stock GT-I9300 (Vodafone New Zealand) a few days ago. When I clicked on install it complained because I was on mobile data and so I decided to wait until I am at home. But when I got within range of a wifi it must have automatically downloaded and installed the update, because the next time I pulled the device out of my pocket it was stuck at the initial boot screen.
I have since tried to do a firmware recovery through Kies, which downloaded the firmware and then failed to install it saying that it does not know the device or something along those lines (I unfortunately did not save a screenshot of the exact message). Then I tried Odin, which simply fails with the log output below. I know that this is a ROM for the UK, but I haven't found a ROM for NZ yet and thought that it might work anyway.
The status printed when I go into the recovery mode is a bit strange:
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Why is there no product name and why is the system status "custom"? I have only had the phone for three weeks and I have not rooted or flashed it yet.
Any suggestions would be much appreciated
Odin output:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OXABLFB_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<ID:0/015> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
download original firmware for galaxy i9300 and flash through odin
that will take you through
or download any rom ZerOne or foxhound they are really nice roms and flash via cwm
vegeta1 said:
download original firmware for galaxy i9300 and flash through odin
that will take you through
or download any rom ZerOne or foxhound they are really nice roms and flash via cwm
Click to expand...
Click to collapse
I am trying to install the original firmware through Odin, but I always get the error message shown at the end of my original post. When I try it a second time directly after it failed, then it does not complain about the PIT but instead fails to connect to the COM port:
<ID:0/011> SetupConnection..
<ID:0/011> Can't open the serial(COM) port.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone through the process of taking out the battery, reinserting it, going into download mode, connecting it to all USB ports on my laptop and trying to flash several times now, always with the same result
I am currently downloading another ROM (I9300XXALF6_I9300ITVALF1_ITV). Maybe that'll work...?
Nuld said:
I am trying to install the original firmware through Odin, but I always get the error message shown at the end of my original post. When I try it a second time directly after it failed, then it does not complain about the PIT but instead fails to connect to the COM port:
<ID:0/011> SetupConnection..
<ID:0/011> Can't open the serial(COM) port.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone through the process of taking out the battery, reinserting it, going into download mode, connecting it to all USB ports on my laptop and trying to flash several times now, always with the same result
I am currently downloading another ROM (I9300XXALF6_I9300ITVALF1_ITV). Maybe that'll work...?
Click to expand...
Click to collapse
Doesn't look like your computer found your phone, remove/reinstall the USB drivers. You can use KIES, click troubleshoot connection, it will reinstall them.
Hope that helps,
-CC
P.S> Make sure ODIN is not open when you run KIES and make sure KIES isn't open when you run ODIN.
clockcycle said:
Doesn't look like your computer found your phone, remove/reinstall the USB drivers. You can use KIES, click troubleshoot connection, it will reinstall them.
Hope that helps,
-CC
P.S> Make sure ODIN is not open when you run KIES and make sure KIES isn't open when you run ODIN.
Click to expand...
Click to collapse
Odin says "<ID:0/011> Added!!" (or some other port of course) whenever I connect the phone, doesn't that mean that it detected the phone?
I actually did the troubleshoot connection in Kies yesterday and it reinstalled the driver. I have since removed Kies (not the driver) from my computer, as I thought that this might be the reason why Odin fails.
Ok I am getting really desperate, I have spent a large part of the weekend trying to get this to work and still no luck. Any further suggestions would be highly appreciated
I have re-installed the USB driver a few times now and Kies is not installed to make sure that there are no conflicts between ODIN/Kies. I have also found a ROM for Vodafone NZ (I9300XXALE8_I9300VNZALE4_VNZ) which is where I got the phone.
ODIN detects when I plug the phone into my computer, but fails with the following:
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
What is the cause for this error and do I need a PIT file and do a re-partition to fix it?
Is it normal that when in download mode, the product name shown on the phone screen is empty?
Thanks!
Your partition table is corrupted. No point trying to fix.
Quickly send to samsung to reflash your phone.
So there is no way I can fix this myself (without risking to make things worse)?
I am not a happy Samsung customer right now, all this time wasted because I installed an official over the air update and who knows how long it'll take to get it fixed...
Thanks for your replies.
Nuld said:
So there is no way I can fix this myself (without risking to make things worse)?
I am not a happy Samsung customer right now, all this time wasted because I installed an official over the air update and who knows how long it'll take to get it fixed...
Thanks for your replies.
Click to expand...
Click to collapse
You are in a position now where further repairs by yourself are even more likely to end up with no warranty .
Phone broke during official update return under warranty .
Flashing other firmwares risks invalidating warranty .
jje
guys i have rooted galaxy s3 i was trying to instal chainfire 3d to my phone just installed and pushed the button that says install driver and restart it istalled drivier and restarted but phone stucks at galaxy s3 logo how can i go to recovery whiout opening the phone so i can flash new rom or something help me out please i am flashing recovery to phone but cant open it
archeuscaine said:
guys i have rooted galaxy s3 i was trying to instal chainfire 3d to my phone just installed and pushed the button that says install driver and restart it istalled drivier and restarted but phone stucks at galaxy s3 logo how can i go to recovery whiout opening the phone so i can flash new rom or something help me out please i am flashing recovery to phone but cant open it
Click to expand...
Click to collapse
Off the phone. Then press power button + volume up + home button
Sent from my GT-I9300 using xda app-developers app
Dear all there is a good news for all of you about SIII product name blank now it can be consider under warranty as Samsung policy.
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
If you can get in to recovery restore the backup you should have made before you installed the rom. can you get in to download mode?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
Hey, you can enter download mode right? if yes you can flash stock firmware via odin or if you can have a access to recovery. how about to wipe data, cache and dalvik cache. it might or might not working. Have a try.
Yes, I can access download mode. So I should just flash the original firmware for the country i live in with odin by just putting it in the bootloader section and that's it?
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Jokerbest2006 said:
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Click to expand...
Click to collapse
chill. are you sure your downloaded firmware is not corrupted? put the .tar file at pda. i suggest you to look at ultimate guide there. it will assist you from A-Z
The file is not corrupted, it's download from sammobile.com, that's the thing. I will download it again and try again maybe it will work. Thanks
So, what to do in case the flashing thing doesn't work on my phone? maybe specialised service center would help or something, pls pls i need solutions!!!
Nono, don't put it in the bootloader field, put it in PDA field.
Seems like a driver issue, reinstall drivers and uninstall Kies, try a different cable, port, OS, pc
Jokerbest2006 said:
The file is not corrupted, i
How do you know its not corrupted ???
Information reads as file corrupt or user not following instructions .
Service
Cheapest method is to start with a JTag service .
jje
Click to expand...
Click to collapse
About setup connection (I'M NOT SURE !!) Insert your sd card .
I had this problem before with my old Galaxy Y . (The same problem 100%)
.......
Guys I need a little help ... my friend's phone (SGS3) can't boot , it just shows the samsung logo (logo begore bootanimation) .
can't enter recovery , but can enter download mode .
I tried to flash it with odin and it success ,, but the phone doesn't boot ??????
As far as I know the problem is with bootloaders . How to flash them ??
I'm very new with samsung , in LG devices we use a completely other tools .
Thanks on advance .
#------------------------------------------
echo "Sender.product.model=LG-P880" # (O4X) .
if [ $thanks -eq $pressed ] ; then
thanks_meter=$((${thanks_meter} + 1)) ; fi #Press it
I'd the flash was successful then boot to stock recovery and do factory reset, then it should boot
Note that this will wipe data AND internal sd card
Ok so i tried again to flash the stock jelly bean back and in odin it shows me like this:
<OSM> I9300XXELLA_I9300OROELL1_I9300BVELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
The part where it says there's no pit partition worries me most. What should I do in this case, I really want to fix my phone? Should I flash the software again and tick "Re-partition''?
May help.
http://forum.xda-developers.com/showthread.php?t=1796062
jje
Hello,
Newbie here... I have followed this forum for three days trying to get my Note II Verizon to boot any ROM. I am only able to get it into Odin Download mode (never been able to get the System Restore Menu). Not sure what this device was originally flashed with but I can't get any bootrom to install.
I have tried the first steps and download the files poseted on this post http://forum.xda-developers.com/showthread.php?t=2043636 and get the folllowing failure:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BootloaderBaseline2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> tz.img
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Phone now gives the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The only successful Rom I have partial success with is: KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.
Odin 3.185 will install this ROM successfully with the PIT. Not the phone will not boot and flashes the Galaxy Note II then turns off. It will only allow me to go back into Bootloader Mode but has never allowed me to get into recovery and wipe the phone. Boot Load screen shows everything stock except the "SYSTEM STATUS: Custom". Since I do not know what ROM was originally installed I am stuck on this one and insight would greatly appreciated. I have also tried other Odin versions including 3.07.
Thank you!
jvaldez33 said:
Hello,
Newbie here... I have followed this forum for three days trying to get my Note II Verizon to boot any ROM. I am only able to get it into Odin Download mode (never been able to get the System Restore Menu). Not sure what this device was originally flashed with but I can't get any bootrom to install.
I have tried the first steps and download the files poseted on this post http://forum.xda-developers.com/showthread.php?t=2043636 and get the folllowing failure:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BootloaderBaseline2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> recovery.img
<ID:0/006> tz.img
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Phone now gives the following message: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The only successful Rom I have partial success with is: KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.
Odin 185 will install this rom successfully with the PIT. Not the phone will not boot and flashes the Galaxy Note II then turns off. It will only allow me to go back into Bootloader Mode but has never allowed me to get into recovery and wipe the phone. Boot Load screen shows everything stock except the "SYSTEM STATUS: Custom". Since I do not know what ROM was originally installed I am stuck on this one and insight would greatly appreciated.
Thank you!
Click to expand...
Click to collapse
Think your version of Odin is too old. try this
https://docs.google.com/file/d/0BwO2K6_pgq39ejFubU43Nkprb2c/edit
See if 307 works better for you.
Note II Won't boot.
dragonstalker said:
Think your version of Odin is too old. try this
https://docs.google.com/file/d/0BwO2K6_pgq39ejFubU43Nkprb2c/edit
See if 307 works better for you.
Click to expand...
Click to collapse
Thank you for the reply. I made a typo and have tried Odin 3.185 and 3.07. Can't seem to get any of them to work. I have contacted Samsung and my phone is under warranty but would like to get the "CUSTOM" off the SYSTEM STATUS to avoid issues with the warranty.
Warranty costs if phone has been rooted
jvaldez33 said:
Thank you for the reply. I made a typo and have tried Odin 3.185 and 3.07. Can't seem to get any of them to work. I have contacted Samsung and my phone is under warranty but would like to get the "CUSTOM" off the SYSTEM STATUS to avoid issues with the warranty.
Click to expand...
Click to collapse
Hello,
Can can anyone share what the Out of Warranty costs are if the Verizon Note II is sent in with a Custom Rom and Samsung doesn't honor the warranty?
jvaldez33 said:
Hello,
Can can anyone share what the Out of Warranty costs are if the Verizon Note II is sent in with a Custom Rom and Samsung doesn't honor the warranty?
Click to expand...
Click to collapse
You will be charged the full price of the device. Just keep trying to fix the issue. There has to be something you aren't doing right. As long as you can get into the boot loader you are in okay shape. Just go back through the instructions and follow them as closely as you possibly can.
Sent from my Nexus 10 using Tapatalk 4
miketoasty said:
You will be charged the full price of the device. Just keep trying to fix the issue. There has to be something you aren't doing right. As long as you can get into the boot loader you are in okay shape. Just go back through the instructions and follow them as closely as you possibly can.
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
In my experience no matter how far gone you think your device is, if you can get into download mode and Odin recognizes it you are OK. I am sure there are circumstances where you can't recover even if you are in that position, but I have never heard of any. Agree with miketoasty, read the instructions carefully and then read them again. Be sure you have the correct files and a decently charged battery. And make sure your USB cable is good.
Sent from my GT-P3110 using xda app-developers app
Update on events
mikelikesbikes said:
In my experience no matter how far gone you think your device is, if you can get into download mode and Odin recognizes it you are OK. I am sure there are circumstances where you can't recover even if you are in that position, but I have never heard of any. Agree with miketoasty, read the instructions carefully and then read them again. Be sure you have the correct files and a decently charged battery. And make sure your USB cable is good.
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
I have been in the IT business for nearly 25 years and have seen many problems resolved if you have the time and desire to put forth the efforts to investigate the problem every day with a clear head. With that being said I for some unknown ADD moment and decided I wanted to troubleshoot my sons girlfriend's Note II that was having problems. Now here I am wrestling with a problem like a drug addict looking for their "next fix". I am very stubborn and extremely capable of diagnosing hardware and software problems but this one truly has me stumped!
With this being a problem I decided to purchase another Note II off EBay to experiment with and was listed with similar problems, Red Light and wouldn't boot.. I figured for $125 the worst that could happen is I could disassemble it and part out the LCD/Digitizer and recuperate my investment. There are some problems I like researching and resolving and this is one. I personally believe the problems on both Note II's may both related to the charging board based on the information on the following post on another forum: http://forum.xda-developers.com/showthread.php?p=45678812#post45678812. I will elaborate a little more shortly.
Let's go over my three day 50 hour marathon. Here is the only download that successfully downloads but the phone will only splash the "GALAXY NOTE II" screen and turn off after a successful install. I have downloaded Odin 3.185 and 3.07 and get the same results:
sch-i605-16gb.pit
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
Unless the problem resides on my laptop I think I have eliminated the issue of having a good cable(s) by using official Samsung cables, NEW RocketFish cables and they all seem to work fine for viewing and transferring files via USB. I also have an external battery charger and can guarantee an excellent charge on the battery(s). The current files I was recommended to use came from a single Zipped file: GalaxyNote2UnlockVerizon. Please let me know if there are a different set of files I should be using?
Unless I have downloaded the wrong files? I have attempted to install the following bootloader with Odin versions 3.07, 3.13 and 3.185 and they all fail: BootloaderBaseline2.tar.md5. All I know at this moment i am stuck at a point that I have the Note II in a state that will not allow me to boot.
Lets discuss some hardware issues that I need to explore a little further. Since I have a spare phone to test with I thought I would swap logic/motherboards and see if I had any different results. Unfortunately they are exactly the same on both Note II's. Now comes an interesting issue I stumbled upon. When I VERY CAREFULLY reassembled it on an ESD Mat I somehow dislodged or did not securely fasten the display cable to the logic board and when the power was pressed the phone seemed to start booting but there was no display. The sound and the blue light came on normally. I had hoped the original ROM was now installing. I powered off the phone, removed the battery and disassembled it to discover my mishap, so I reconnected the display cable and reassembled the phone only to see the original problem was still present.
Has anyone else had a charging port issue that caused similar problems? I was planning on ordering a new charging port off Amazon today just to try. Any additional information would be greatly appreciated.
Thank all of you that contribute to this site. It is amazing how many problems can be resolved when great minds are put together.
The red light and wont boot indicates a hard brick...more then likely the device had something flashed to it that corrupted the emmc. Moral of the story...its now a paper weight.
No Red Light
droidstyle said:
The red light and wont boot indicates a hard brick...more then likely the device had something flashed to it that corrupted the emmc. Moral of the story...its now a paper weight.
Click to expand...
Click to collapse
It doesn't have a red light. I can get it into the download mode and it will allow the ROM update through Odin but it will only splash the "GALAXY NOTE II" screen and power off.
jvaldez33 said:
It doesn't have a red light. I can get it into the download mode and it will allow the ROM update through Odin but it will only splash the "GALAXY NOTE II" screen and power off.
Click to expand...
Click to collapse
look for a n7100 tar, or maybe "I think, can't remember" there was a stock tar in the I605 mega roll thread somewhere. flash one of them. Try not to use the kies tar as i've had problems with them being corrupted before. Know you've tried both the methods already. Just a suggestion in case you have not. Also check and make sure you have the right pda file.
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Which version of ODIN did you use? What kind of file(s) were you trying to flash?
Sent from my GT-I9300 using Tapatalk
I'm not sure but think it was Mobile Odin 3.65 and I was trying to flash CWM touch from xda.
Additionally, I think my battery charge may now be low after many attempts to recover it but will that matter bearing in mind I'm using Odin on my PC and the phone is connected to the PC by USB cable?
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
JJEgan said:
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
matrixmainframe said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
Click to expand...
Click to collapse
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
JJEgan said:
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
Click to expand...
Click to collapse
Kies is not installed on my computer and I have tried Odin versions 1.83, 1.85, 3.04, 3.06, 3.07 and 3.09.
I have also tried 'Samsung_USB_Drivers_1.5.27.0.exe' and 'SAMSUNG_USB_Driver_for_Mobile_Phones.exe' and remembering to uninstall then reboot and then install.
On one occasion it got as far as (can't remember the exact words) "Get PIT Mapping" but then just stopped there.
I cannot believe I have done anything other than corrupt the CWM recovery because all I did was try to flash CWM Touch and as soon as I pressed OK the screen went black with the word "Samsung Galaxy SIII GT-I9300". Those words just stay there because since then I can't switch the phone off. I thought that if I just reflashed CWM via Odin on my computer I would be able to get back into recovery mode and just restore my backup.
Appears I am mistaken and have ruined a very new and vey expensive phone.
The only other thing I seem to recall is that before I tried the Mobile Odin flash the battery was below 50% charge but I'm not sure if that's relevant?
This is usually a wrong file flash symptom .
JJEgan said:
This is usually a wrong file flash symptom .
Click to expand...
Click to collapse
Do you mean I'm trying to flash something I shouldn't?
Initially I tried to flash CWM Recovery but then decided just to try and get it back the way it was by trying to flash Android 4.1.2 again.
The file I have been using is "KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5" which I believe is from Sammobile and which is, I believe again, the ROM that the Galaxy S3 comes pre-installed with. Do you think it worthwhile me trying some other ROM?
I have been doing a lot more web research and some say that the battery charge should be more than 80%. Does this matter?
Won't the battery have been charging all the while the phone was plugged into into the Computer via the USB lead?
If I buy a separate charger and charge my battery to 100% do you think the Odin reflash will work then?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
llcoolveer said:
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
Click to expand...
Click to collapse
Nice to know I'm not alone but sorry you're having the same problem. Have sat down to do some more web searching and will let you know if I find a solution
Service centre new motherboard .
JJEgan said:
Service centre new motherboard .
Click to expand...
Click to collapse
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
llcoolveer said:
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
Click to expand...
Click to collapse
Please can you tell me what is "OG Recovery"?
Thanks
matrixmainframe said:
Please can you tell me what is "OG Recovery"?
Thanks
Click to expand...
Click to collapse
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
llcoolveer said:
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
Click to expand...
Click to collapse
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
matrixmainframe said:
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
Click to expand...
Click to collapse
I couldn't also....only when my battery was full charged....:good:
Succes....
The end
Okay, I started this thread so will end it now as follows:
1 Thank you to all those who offered help/advice/suggestions.
1a Some people do not read posts properly because even though I had specifically stated that I could not get into recovery mode some people proceeded to tell me to go into recovery mode and restore my rom.
2 Whilst I have recovered the full use of my phone I can no longer root it but that's ok because at least I have a phone that is comparable to the vast majority who choose not to root.
3 I will explain how I rescued it but obviously I don't really understand what the result is other than a usable phone so please don't copy.
4 Whilst I have no doubt one could damage a motherboard, that could only be done with very specialist software that most people would not have so the advice of some that I needed a new motherboard was ill informed. If you don't know the answer don't offer an unhelpful answer. Recommending a new motherboard is like a motorist taking his car into a garage with a blown fuse and the mechanic saying the only cure is a new car.
5 After a lot of research I found one lone website that explained that from July 2013 Samsung introduced a change to their ROMs which introduced an efs 2 file. Additionally it appears that once you have flashed/upgraded to an efs2 ROM you cannot then go back to an efs ROM.
6 This is above my understanding but I do know I did go from efs to efs2 and when I then encountered a problem I thought it a good idea to go back to my original (efs) ROM which I now believe caused my problem.
7 I did not know if I had found the answer but as I believed my phone was a paperweight at that point anyway I had nothing to lose and downloaded the GT-I9300.pit file and flashed with repartition selected. I then flashed Android 4.3 knowing it would be an efs2 ROM and my phone is now working again.
8 However, although my phone is now working again, I find that I cannot install a custom recovery nor can I root the phone but that is a small price to pay to have a brand new S3 working again.
9 Whilst it may not be wise to mess about with the pit file, it seems nothing can be lost to give it a go because even if it doesn't work you can still go for the new motherboard option happy in the knowledge you have tried everything.
10 I may start a new thread for advice on that matter but for the time being I'm just relieved to have my phone back and I stress again that it did work for my specific problem and whilst it might work for you please only do it knowing it may not work for your problem.
Hello,
So I accidently deleted a folder of photos vs the one photo i wanted to. In my attempts to recover the photos i tried to root my Galaxy S4 GT-I9505. I tried to use Odin and I kept getting an error saying my phone was removed during the process. I tried mutiple USB ports which no luck. Now my phone is stuck with "Firmware has encounted an issue. Please select recovery mode in Kies & try again." So i downloaded Kies which then told me my phone does not support initialization. so i tried Kies 3 which doesnt support my phone model. I am trying to download the firmware from samsung website, but due to where i am stationed the internet isnt the best. Is there anything a super rookie like me can do? would a factory reset solve my issue? Please help me, I need my phone to keep in touch with my family back home.
Mcrblues said:
Hello,
So I accidently deleted a folder of photos vs the one photo i wanted to. In my attempts to recover the photos i tried to root my Galaxy S4 GT-I9505. I tried to use Odin and I kept getting an error saying my phone was removed during the process. I tried mutiple USB ports which no luck. Now my phone is stuck with "Firmware has encounted an issue. Please select recovery mode in Kies & try again." So i downloaded Kies which then told me my phone does not support initialization. so i tried Kies 3 which doesnt support my phone model. I am trying to download the firmware from samsung website, but due to where i am stationed the internet isnt the best. Is there anything a super rookie like me can do? would a factory reset solve my issue? Please help me, I need my phone to keep in touch with my family back home.
Click to expand...
Click to collapse
If you can boot into recovery, a factory reset can't harm. But it might not fix your issues.
Can you still boot your phone into download mode? If yes, then just download the original stock rom from sammobile.com. It's best to choose the version for your country and carrier. Install it with Odin.
If you still want to root, try chain fire autoroot. Again with Odin.
http://autoroot.chainfire.eu
But after flashing stock Rom, I doubt you will be able to recover your photos. So no point in rooting if you don't care about having root.
Sent from my GT-I9505
Yes i can still access download mode..I think i tried using Chainfire with Odin but Rooting is something for another day. I just want to get my phone operational at a minimum. Im currently trying to download firmware from Samsung-update.com or something like that. Is sammobile.com a better site for me to use? I'm at work right now so I am unable to work on the issue at hand but once I get the stock ROM how easy is it to get on to the phone using Odin?
Mcrblues said:
Yes i can still access download mode..I think i tried using Chainfire with Odin but Rooting is something for another day. I just want to get my phone operational at a minimum. Im currently trying to download firmware from Samsung-update.com or something like that. Is sammobile.com a better site for me to use? I'm at work right now so I am unable to work on the issue at hand but once I get the stock ROM how easy is it to get on to the phone using Odin?
Click to expand...
Click to collapse
Samsung-updates is just as good.
The firmware you download will probably be a zip file. You should extract it if it's a zip. You should end up with a file with the extension: tar or tar.md5.
You have to boot your phone into download mode.
Start Odin on the pc in administrator mode.
Connect the phone to the pc. Use the original USB cable that came with the phone.
You should see the text: in Odin when you connect the phone.
Put the firmware you downloaded in Odin in PDA or if you're using the latest version, in AP.
Make sure only: "auto reboot" and "f. Reset time" are checked.
Click start and wait until your phone restarts. (10 minutes or more)
You're done.
EDIT: one more thing, make sure Kies isn't running in the background. It might interfere with Odin.
Sent from my GT-I9505
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNF6_I9505H3GGNF2_I9505XXUGNF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Ok i want to start by saying i love you both for helping..I got my phone back!!!!!
and ive learned my lesson in rooting..dont do it because im dumb