I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Which version of ODIN did you use? What kind of file(s) were you trying to flash?
Sent from my GT-I9300 using Tapatalk
I'm not sure but think it was Mobile Odin 3.65 and I was trying to flash CWM touch from xda.
Additionally, I think my battery charge may now be low after many attempts to recover it but will that matter bearing in mind I'm using Odin on my PC and the phone is connected to the PC by USB cable?
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
JJEgan said:
One flash Philz recovery and format system data cache and sd card .
Two check your USB drivers for Odin and make sure Kies is not running .
What do you mean Odin sticks at setup connection ??
If its before flashing its drivers or try another version of Odin .
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
matrixmainframe said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.00.8-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
and it stops there
Click to expand...
Click to collapse
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
JJEgan said:
I am reading that as fail before install .
wo check your USB drivers for Odin and make sure Kies is not running .
try another version of Odin .
Click to expand...
Click to collapse
Kies is not installed on my computer and I have tried Odin versions 1.83, 1.85, 3.04, 3.06, 3.07 and 3.09.
I have also tried 'Samsung_USB_Drivers_1.5.27.0.exe' and 'SAMSUNG_USB_Driver_for_Mobile_Phones.exe' and remembering to uninstall then reboot and then install.
On one occasion it got as far as (can't remember the exact words) "Get PIT Mapping" but then just stopped there.
I cannot believe I have done anything other than corrupt the CWM recovery because all I did was try to flash CWM Touch and as soon as I pressed OK the screen went black with the word "Samsung Galaxy SIII GT-I9300". Those words just stay there because since then I can't switch the phone off. I thought that if I just reflashed CWM via Odin on my computer I would be able to get back into recovery mode and just restore my backup.
Appears I am mistaken and have ruined a very new and vey expensive phone.
The only other thing I seem to recall is that before I tried the Mobile Odin flash the battery was below 50% charge but I'm not sure if that's relevant?
This is usually a wrong file flash symptom .
JJEgan said:
This is usually a wrong file flash symptom .
Click to expand...
Click to collapse
Do you mean I'm trying to flash something I shouldn't?
Initially I tried to flash CWM Recovery but then decided just to try and get it back the way it was by trying to flash Android 4.1.2 again.
The file I have been using is "KIES_HOME_I9300XXEMG4_I9300OXAEMG4_1314436_REV00_user_low_ship.tar.md5" which I believe is from Sammobile and which is, I believe again, the ROM that the Galaxy S3 comes pre-installed with. Do you think it worthwhile me trying some other ROM?
I have been doing a lot more web research and some say that the battery charge should be more than 80%. Does this matter?
Won't the battery have been charging all the while the phone was plugged into into the Computer via the USB lead?
If I buy a separate charger and charge my battery to 100% do you think the Odin reflash will work then?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL5_I9300VFGELL1_I9300BUELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
so close
matrixmainframe said:
I have a Galaxy S3 GT-I9300 running the Samsung Stock 4.1.2 ROM.
It was rooted and I tried to flash CWM Recovery using Mobile Odinbut as soon as I did that the only thing that now appears when I try to boot the phone is the initial black screen with the "Samsung Galaxy SIII GT-I9300" words.
I cannot get into Recovery mode.
I can get in to download mode but no matter what I try with Odin it sticks at setupconnection. I have used Odin to try and re flash CWM to try and get back into Recovery mode but get stuck at setupconnection.
I have used Odin to try and re flash the stock ROM but again get stuck at setupconnection.
I get this whether I try using Odin on my laptop or my desktop PC
I did wonder if this would happen if my battery charge was low so I plugged the phone in the charger to see what the battery level was when it appeared but the battery will not appear and again I see only the words "Samsung Galaxy SIII GT-I9300" on the black background.
Can anyone suggest a way out of this?
Thanks
Click to expand...
Click to collapse
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
llcoolveer said:
Same here,and i have to load my battery 100% before it gets into 'download mode'again...
Lets see if we can get it up and running again...your not alone...
Click to expand...
Click to collapse
Nice to know I'm not alone but sorry you're having the same problem. Have sat down to do some more web searching and will let you know if I find a solution
Service centre new motherboard .
JJEgan said:
Service centre new motherboard .
Click to expand...
Click to collapse
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
llcoolveer said:
Fixxed it by going in the OG recovery....did a hard factory reset and vavooom....fixxed it....:good:
btw,was it a problem that you rooted your phone....? Due to extra costs,or did they bring it under warranty...?
Thanx in advandce for the reply.....
Sincerely ,LLCOOLVEER
Click to expand...
Click to collapse
Please can you tell me what is "OG Recovery"?
Thanks
matrixmainframe said:
Please can you tell me what is "OG Recovery"?
Thanks
Click to expand...
Click to collapse
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
llcoolveer said:
the Original Recovery....or Stock revovery.....http://www.youtube.com/watch?feature=player_detailpage&v=UvD6ZCENlJA
Click to expand...
Click to collapse
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
matrixmainframe said:
Thanks for that but as I stated in my original post I cannot get into Recovery Mode
Click to expand...
Click to collapse
I couldn't also....only when my battery was full charged....:good:
Succes....
The end
Okay, I started this thread so will end it now as follows:
1 Thank you to all those who offered help/advice/suggestions.
1a Some people do not read posts properly because even though I had specifically stated that I could not get into recovery mode some people proceeded to tell me to go into recovery mode and restore my rom.
2 Whilst I have recovered the full use of my phone I can no longer root it but that's ok because at least I have a phone that is comparable to the vast majority who choose not to root.
3 I will explain how I rescued it but obviously I don't really understand what the result is other than a usable phone so please don't copy.
4 Whilst I have no doubt one could damage a motherboard, that could only be done with very specialist software that most people would not have so the advice of some that I needed a new motherboard was ill informed. If you don't know the answer don't offer an unhelpful answer. Recommending a new motherboard is like a motorist taking his car into a garage with a blown fuse and the mechanic saying the only cure is a new car.
5 After a lot of research I found one lone website that explained that from July 2013 Samsung introduced a change to their ROMs which introduced an efs 2 file. Additionally it appears that once you have flashed/upgraded to an efs2 ROM you cannot then go back to an efs ROM.
6 This is above my understanding but I do know I did go from efs to efs2 and when I then encountered a problem I thought it a good idea to go back to my original (efs) ROM which I now believe caused my problem.
7 I did not know if I had found the answer but as I believed my phone was a paperweight at that point anyway I had nothing to lose and downloaded the GT-I9300.pit file and flashed with repartition selected. I then flashed Android 4.3 knowing it would be an efs2 ROM and my phone is now working again.
8 However, although my phone is now working again, I find that I cannot install a custom recovery nor can I root the phone but that is a small price to pay to have a brand new S3 working again.
9 Whilst it may not be wise to mess about with the pit file, it seems nothing can be lost to give it a go because even if it doesn't work you can still go for the new motherboard option happy in the knowledge you have tried everything.
10 I may start a new thread for advice on that matter but for the time being I'm just relieved to have my phone back and I stress again that it did work for my specific problem and whilst it might work for you please only do it knowing it may not work for your problem.
Related
I have managed to get myself into a pickle. Trying to revert back to stock today I flashed a stock ROM via Odin. This worked but put the phone in a boot loop, so I booted into recovery and tried a factory reset. However, this crashed. I can now boot into download mode, but not recovery. The phone now is stuck in a very slow boot loop, not getting past the SGS2 splash screen (the one which has the yellow triangle).
I have tried re-installing stock roms via Odin. Odin says success, but the phone still won't get past the spash screen and won't let me boot into recovery either.
I have spent hours today searching for guidance, and have tried everything I have found but am not having to admit defeat and ask for help.
I have tried flashing different versions of stock and different kernels without success. Any ideas on what else I can try?
Thanks in advance,
Andy
I have managed to get myself into a pickle. Trying to revert back to stock today I flashed a stock ROM via Odin. This worked but put the phone in a boot loop, so I booted into recovery and tried a factory reset. However, this crashed. I can now boot into download mode, but not recovery. The phone now is stuck in a very slow boot loop, not getting past the SGS2 splash screen (the one which has the yellow triangle). <br />
<br />
I have tried re-installing stock roms via Odin. Odin says success, but the phone still won't get past the spash screen and won't let me boot into recovery either. <br />
<br />
I have spent hours today searching for guidance, and have tried everything I have found but am not having to admit defeat and ask for help.<br />
<br />
I have tried flashing different versions of stock and different kernels without success. Any ideas on what else I can try?<br />
<br />
Thanks in advance, <br />
<br />
Andy
Click to expand...
Click to collapse
Ok. No problem. Your problem looks simple but i need to know your phone model.
Is your phone GT I9100 or GT I9100G?
Swyped from my Samsung Galaxy SII
Jokesy said:
Ok. No problem. Your problem looks simple but i need to know your phone model.
Is your phone GT I9100 or GT I9100G?
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
It is the GT-I9100.
Thanks.
awicks said:
It is the GT-I9100.
Thanks.
Click to expand...
Click to collapse
1. Visit here : forum.xda-developers.com/showthread.php?t=1419102
Download the .tar Odin Noob proof edition. It looks like this:
CM9 Resurrection Edition for use with Odin:
20120420: Download
20120330: Download
Download the first one (20120420), then flash via Odin.
Swyped from my Samsung Galaxy SII
Jokesy said:
Download the first one (20120420), then flash via Odin.
Click to expand...
Click to collapse
Have just tried that but it failed:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is now stuck in download mode with the progress bar at approx 90%.
Andy
awicks said:
Have just tried that but it failed:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is now stuck in download mode with the progress bar at approx 90%.
Andy
Click to expand...
Click to collapse
any news or still stuck here?
Swyped from my Samsung Galaxy SII
awicks said:
Have just tried that but it failed:
<snip>
The phone is now stuck in download mode with the progress bar at approx 90%.
Andy
Click to expand...
Click to collapse
Posted up the wrong Odin log. Let's try again.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> zImage
<ID:0/006> NAND Write Start!!
<ID:0/006> Sbl.bin
<ID:0/006> param.lfs
<ID:0/006> modem.bin
<ID:0/006> factoryfs.img
<ID:0/006> data.img
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Andy
I left it for over 45 mins and nothing happened. I have tried again and received the same error message.
Andy
awicks said:
I left it for over 45 mins and nothing happened. I have tried again and received the same error message.
Andy
Click to expand...
Click to collapse
What version of Odin are you using?
Swyped from my Samsung Galaxy SII
ODIN 3 v3.04
awicks said:
ODIN 3 v3.04
Click to expand...
Click to collapse
use Odin 1.85
Swyped from my Samsung Galaxy SII
awicks said:
Have just tried that but it failed:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The phone is now stuck in download mode with the progress bar at approx 90%.
Andy
Click to expand...
Click to collapse
This is obviously a communication problem, maybe your USB cable is damaged ?
Try different cable because I had a similar problem with my previous SGS 1
Hope it will help you
leech4 said:
This is obviously a communication problem, maybe your USB cable is damaged ?
Try different cable because I had a similar problem with my previous SGS 1
Hope it will help you
Click to expand...
Click to collapse
That was the wrong Odin log I pasted. I pasted the correct one a few posts later.
I have now tried both Odin 3.04 and 1.85. 3.04 throws a 'fail' message whilst 1.85 just hangs at the same stage. I have again left it for over an hour and nothing has happened.
Will keep trying things.
awicks said:
That was the wrong Odin log I pasted. I pasted the correct one a few posts later.
I have now tried both Odin 3.04 and 1.85. 3.04 throws a 'fail' message whilst 1.85 just hangs at the same stage. I have again left it for over an hour and nothing has happened.
Will keep trying things.
Click to expand...
Click to collapse
Ok. No Problem
1. Reboot PC
1. Make sure Kies is not running in background?
2. Try using the Odin 3.0.4, the latest version 3.0.7 (some people have reported success with it after Odin 1.85 stucked) and let see what happens.
If it still does not flash then,
Visit this thread: http://forum.xda-developers.com/showthread.php?t=1457458
I have worked out that I can flash stock via Odin without issue. However, everytime I try to flash that version of CM recommended the flash fails.
I have checked (numerous times, just in case) that Kies is not running in the background.
I will have a go at the method mentioned in the linked thread - thanks.
Andy
Odd. As I was posting that last message, I heard the very pleasing SGS2 bootup tone and the phone is now showing the flashing 'S' logo - something I haven't seen for about ten hours! I had just flashed stock (for the nth time today!) and something has worked differently. At the moment I have not got past the 'S' logo, and still cannot boot into recovery but it seems like progress!
Andy
awicks said:
I have worked out that I can flash stock via Odin without issue. However, everytime I try to flash that version of CM recommended the flash fails.
I have checked (numerous times, just in case) that Kies is not running in the background.
I will have a go at the method mentioned in the linked thread - thanks.
Andy
Click to expand...
Click to collapse
Ok. Use the tutorial in the thread. Let me know if things work out for you.
PS: I don't know why the CM didn't work. I've used it to solve similar issues on this forum already.
Good luck
I have had a go at using the instructions in the linked thread, but so far without any luck. I have not yet managed to get hold of the .pit file, so haven't had a go with that. I will also have a go at flashing the GB ROM as well to see if that makes any difference.
Any other ideas?
awicks said:
I have had a go at using the instructions in the linked thread, but so far without any luck. I have not yet managed to get hold of the .pit file, so haven't had a go with that. I will also have a go at flashing the GB ROM as well to see if that makes any difference.
Any other ideas?
Click to expand...
Click to collapse
No ideas until you try every solution there. You are still missing the .pit file etc.
Swyped from my Samsung Galaxy SII
SUCCESS!!
I had corrupted the /data partition, so whenever anything tried to access any part of that partition the phone froze. To rectify it I used the pit files from this thread: http://forum.xda-developers.com/showthread.php?t=1667886 and moved the data partition be enough to completely avoid the section that was corrupted. I then flashed the recovery ROM as instructed in this thread: http://forum.xda-developers.com/showthread.php?t=1457458 and the phone is now booting.
I have now reinstalled CWM and CM9 so I am back up and running. The only downside of this process is that the internal memory pf my phone is now smaller due to the unused space left by shifting the data partition. If this causes me a problem down the line, I might re-partition using a pit file that doesn't shift the /data partition as much, and keep trying to see what the minimum shift is in order to avoid the corrupt part of the file system.
Thanks for all of your help,
Andy
I have never rooted my phone, always used official updates. Upgraded to Android 4.1.1 last night and after few hours my phone just stuck wiht the "Samsung Galaxy S3 startup logo". The phone wont reboot at all. I tryed to factory reset (volume up + home + power), wont work.. one time it tryed to do something and failed. I can boot to odin download menu and i tryed to reset to official stock firmare and it says something about partition corrupted or broken. After that i tryed again with the new partition option, it failed again. Is there anything i can do to get this phone working again?
aeinola said:
I have never rooted my phone, always used official updates. Upgraded to Android 4.1.1 last night and after few hours my phone just stuck wiht the "Samsung Galaxy S3 startup logo". The phone wont reboot at all. I tryed to factory reset (volume up + home + power), wont work.. one time it tryed to do something and failed. I can boot to odin download menu and i tryed to reset to official stock firmare and it says something about partition corrupted or broken. After that i tryed again with the new partition option, it failed again. Is there anything i can do to get this phone working again?
Click to expand...
Click to collapse
Send it back for repair if you've never routed or anything. It can likely be fixed by routing and whatnot but if you've never done it, why risk it.
Parva4 said:
Send it back for repair if you've never routed or anything. It can likely be fixed by routing and whatnot but if you've never done it, why risk it.
Click to expand...
Click to collapse
Send it for repairs and wait for several weeks to get it back? Very tempting. :cyclops: Lets call that plan B.
If i can do something to wake this baby up today or tomorrow i'll take it.
It sounds like you somehow softbricked your phone without even rooting it lol.
Anyway, if you can go into ODIN download mode, you might wanna try rooting the phone to see if it works. Cos once the phone's rooted, you can easily flash a stock ROM to save it. If you're worried about voiding the warranty, you can unroot the phone after everything's done.
Instructions for unrooting: http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-galaxy-s3-i9300/
Hope this helps!
chunghanjie92 said:
IAnyway, if you can go into ODIN download mode, you might wanna try rooting the phone to see if it works. Cos once the phone's rooted, you can easily flash a stock ROM to save it. If you're worried about voiding the warranty, you can unroot the phone after everything's done.
Click to expand...
Click to collapse
I did try that and it did not work. Maybe i did something wrong? Dont know... Im pretty sure the problem is with broken partition. I had the Auto Reboot, Re-Partition and F. Reset Time checked. Got file for PIT and got file for PDA. It just wont work. Odin says every time FAILED!
Do not use pit or repartition unless you know what you are doing.
jje
Sent from my GT-I9300 using xda premium
aeinola said:
I had the Auto Reboot, Re-Partition and F. Reset Time checked. Got file for PIT and got file for PDA. It just wont work. Odin says every time FAILED!
Click to expand...
Click to collapse
NEVER CHECK RE-PARTITION trololololo .... and never use PIT unless you are know what you doing.
Wow! These "never use PIT unless you are know what you doing"-comments are really helpful. Thank you guys! :good:
Follow the instructions on this site:
http://galaxys3root.com/galaxy-s3-root/how-to-root-galaxy-s3/
The site tells you how to root a phone (look at the picture to see what you need/don't need to check; usually all you need to check is Auto-Reboot and nothing else)
After the phone's rooted you can download a ROM from this site http://samsung-updates.com/device/?id=GT-I9300 and flash it into the phone using the same method you flashed the file to root your phone
Thanks for the help. Odin says: "There is no PIT partition" and FAILS.
So i NEED to Re-Partition, any help would be appreciated.
I try to Re-Partition and here is what Odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_ROOT_DEODEX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The files (including mx.pit) is from these forums. What should i do?
aeinola said:
I try to Re-Partition and here is what Odin says:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXBLH1_I9300OLBBLH1_I9300DXLH1_ROOT_DEODEX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The files (including mx.pit) is from these forums. What should i do?
Click to expand...
Click to collapse
Same thing for me, and I'm stuck with this problem for 2 months now!!!
I read that for some reason unknown, some S3 got these fuc*** motherboards!!!
If u can solve this without samsung service center, please post!!!:good:
Of course you can manage it without Samsng Service center, if you want.
The procedure is:
1. download to PC the I9300 Service Manual;
2. buy motherboard;
3. replace it by yourself.
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
If you can get in to recovery restore the backup you should have made before you installed the rom. can you get in to download mode?
Jokerbest2006 said:
Ok. So, today my gt-i9300 started working. I was using the Resurrection Remix rom 3.1.4 on my phone. Suddenly i wanted to check what's the time and the phone was one, the led was blipping but the phone wasn't working. I restarted it and app after app was crashing, whatsapp couldn't find the conversations, viber wasn't signed in, also the contacts weren't all found. I restarted it again, signed into viber, restored some contacts and i wanted also to restore my messages. I did it and it stopped again and i tried to restart again. Once i did, IT IS STUCK AT THE Samsung Galaxy S III GT-I9300 logo. I don't even know if this is a bootloop and how to fix it. Please help me guys, i really need it!!! And also if it's possible to save what's on my phone so i can put it back on the new software or something? How do to that?
Click to expand...
Click to collapse
Hey, you can enter download mode right? if yes you can flash stock firmware via odin or if you can have a access to recovery. how about to wipe data, cache and dalvik cache. it might or might not working. Have a try.
Yes, I can access download mode. So I should just flash the original firmware for the country i live in with odin by just putting it in the bootloader section and that's it?
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Jokerbest2006 said:
Ok, what the hell, i download the stock firmware for my i9300 and when i'm flashing it with odin 3.04 i get this:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300TNLMA2_I9300BOLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
It happened when the .tar file was on pda and now on phone, and it's staying like this for 10 minutes without doing something....WTH?!?!? PLEASE HELP!!!!!
Click to expand...
Click to collapse
chill. are you sure your downloaded firmware is not corrupted? put the .tar file at pda. i suggest you to look at ultimate guide there. it will assist you from A-Z
The file is not corrupted, it's download from sammobile.com, that's the thing. I will download it again and try again maybe it will work. Thanks
So, what to do in case the flashing thing doesn't work on my phone? maybe specialised service center would help or something, pls pls i need solutions!!!
Nono, don't put it in the bootloader field, put it in PDA field.
Seems like a driver issue, reinstall drivers and uninstall Kies, try a different cable, port, OS, pc
Jokerbest2006 said:
The file is not corrupted, i
How do you know its not corrupted ???
Information reads as file corrupt or user not following instructions .
Service
Cheapest method is to start with a JTag service .
jje
Click to expand...
Click to collapse
About setup connection (I'M NOT SURE !!) Insert your sd card .
I had this problem before with my old Galaxy Y . (The same problem 100%)
.......
Guys I need a little help ... my friend's phone (SGS3) can't boot , it just shows the samsung logo (logo begore bootanimation) .
can't enter recovery , but can enter download mode .
I tried to flash it with odin and it success ,, but the phone doesn't boot ??????
As far as I know the problem is with bootloaders . How to flash them ??
I'm very new with samsung , in LG devices we use a completely other tools .
Thanks on advance .
#------------------------------------------
echo "Sender.product.model=LG-P880" # (O4X) .
if [ $thanks -eq $pressed ] ; then
thanks_meter=$((${thanks_meter} + 1)) ; fi #Press it
I'd the flash was successful then boot to stock recovery and do factory reset, then it should boot
Note that this will wipe data AND internal sd card
Ok so i tried again to flash the stock jelly bean back and in odin it shows me like this:
<OSM> I9300XXELLA_I9300OROELL1_I9300BVELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
The part where it says there's no pit partition worries me most. What should I do in this case, I really want to fix my phone? Should I flash the software again and tick "Re-partition''?
May help.
http://forum.xda-developers.com/showthread.php?t=1796062
jje
How it started:
A pop message appears asking to format the phone, I accidentally hit okay, after 10 seconds I realized it, I immediately stopped the process by hitting the back button which caused my phone to go blank screen and freeze. so I pressed and hold power button, and the phone shuts off turns back on then it get stuck on the Samsung Logo/screen and won't go through no matter how long I wait.
So with that said I may have corrupted my Operating System so I went online to try to look for solutions to recover my Note.
i have downloaded Odin v1.85 and v3.07
i have downloaded the latest OS Jellybean from samsung:
(KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5)
i have downloaded the latest USB software and currently using the original cable that came in the box.
I open Odin v1.85 on my Windows 7 Ultimate Desktop
i put my phone in Odin download mode (power + volume down)
I pressed volume up
I plugged in my phone to the USB
I clicked start
and then I get stuck
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> amss.bin
<ID:0/005> NAND Write Start!!
Please see my screenshot as attachment.
Please help!
Thank you!
http://forum.xda-developers.com/showthread.php?t=2240096
okay thank you i am reading it now.
i will report back with the outcome.
thanks once again.
okay before i go further if you look at my attachment
first box says "MODEM"
is this normal?
i saw a vid on youtube shows "SYSTEM"
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
What it says is what yrs currently flashing. That's just where it's getting stuck
studacris said:
What it says is what yrs currently flashing. That's just where it's getting stuck
Click to expand...
Click to collapse
so is there any solution to this?
i tried it over again on another PC (Laptop)
i still get the same error where I get stuck:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> amss.bin
<ID:0/003> NAND Write Start!!
stuck here... no matter how long I wait i have been up all day long and found no solution online
I will send $10 paypal donation to the website or to somebody that can help me revive my phone back to normal.
i am that desperate now. i have been up for almost 12 hours trying everything i could.
i am currently looking for a .pit file for Samsung Galaxy Note AT&T SGH-i717 cannot find it anywhere!
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
studacris said:
Are you using the same .tar everytime?
Try another package and see what happens.
Or... just flash a twrp.tar and just flash a custom Rom on that thing.
Click to expand...
Click to collapse
Yes: KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5
i'll download an older version (ice cream sandwich)
i have not tried twrp.tar nor custom ROM
can you point me to a link to DL it?
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
studacris said:
If another stock package doesn't work here's Twrp
http://forum.xda-developers.com/showthread.php?t=1647575
Then you put a custom Rom of your choice I your sdcard and flash that within recovery.
Click to expand...
Click to collapse
tried it i'm still stuck.
please see screenshot
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
sinasiadat said:
are you running Odin as admin?
as long as you can still get into download mode and have odin recognize you, you are in good shape. Dont do something to put yourself in qualcomm download mode. Else, you will be sending your phone to be jtagged. . .
Click to expand...
Click to collapse
yes
studacris said:
In my guide it mentioned trying different cables and cleaning the usb port.
Have you taken those steps?
Click to expand...
Click to collapse
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
I meant cleaning the port on the device itself
jeffcarp003 said:
yes tried 3 diff cables and tried 4 MB ports and 3 laptop ports
Click to expand...
Click to collapse
what is device manager showing you when your phone is plugged in? what does it enumerate as . .
do you have a copy of QPST? (you work for qualcomm right?)
I Hard Bricked Galaxy note i7i7
Hello
I was flashing a kernel in order for this jellybam rom to work.So when i put my phone into custom recovery mode and installed the custom kernel through custom recovery a quick message appeared and my phone just shut off. My phone hasn't turned on since and i have no clue to unbrick my phone. I talked to a guy at att and he said that he unbricked his hard bricked phone without a jig or a jtag is that possible?
jeffcarp003 said:
I have read your guide and installed the latest samsung USB driver
I rebooted my computer opened ODIN as admin
followed instructions and i am back to my original post
i think it has something to do with the fact mine shows "MODEM"
this is what i'm talking about.
the difference is on this pic it shows "SYSTEM"
while mine says "MODEM"
does that mean my phone can no longer be recovered?
Am I missing something here? seems like I have a more technical issue/problem other than common Odin problems.
any help would be appreciated.
Click to expand...
Click to collapse
Sounds like corrupted download. Look for another source and let me know how it goes.
Sent from my XT894 using Tapatalk
Hello, and excuse my poor English.
I got my hands over a white S3 GT-I9300 running 4.1.2 (I9300XXELLA), the phone was suffering some annoying failures (certain built-in apps crashes after the keyboard is displayed and the phone app dial freezes after you press the call button thus the device make the call), did the wipe/data&cache, factory reset using the settings menu and OTA updates, this last one keeps saying the phone couldn't connect to check updates after several wipes/attempts.
So I followed this tutorial www[dot]android[dot]gs/install-official-xxugna8-android-4-3-jb-on-galaxy-s3-i9300/ (pretty much the same procedures as I re-flashed one of my previous phones, a Galaxy S Duos so I was kinda confident) but instead of the XXUGNA8 update I downloaded the Argentinian variant I9300UBUGNK1_I9300UVOUGNK1_ARO, followed all the steps in the tutorial and ODIN flashed successfully, the phone insta-rebooted for less than one second and stuck there (always rebooting in loop, showing the "Samsung Galaxy S3 GT-I9300" logo for less than one second), tried pulling out the battery, no luck. I can't access the recovery either but can enter in download mode. Also tried the KIES method but after asking the S/N it says "the model information that you have entered cannot be verified, the device initialization cannot proceed."
Tried to flashing it again using the same steps and files but got a NAND write error once and I stopped after that, now I am downloading the XXUGNA8 version at 50kb/s from samsung-firmware page since I started getting a 502 bad gateway error from sammobile's page.
What did I wrong? Can someone point me the necessary steps to repair this phone if there is a fix?
Here's the re-attempt log from ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNK1_I9300UVOUGNK1_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it appears as follows:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Any help would be more than welcome.
Regards.
I'm not a robot
dckmnn said:
Hello, and excuse my poor English.
I got my hands over a white S3 GT-I9300 running 4.1.2 (I9300XXELLA), the phone was suffering some annoying failures (certain built-in apps crashes after the keyboard is displayed and the phone app dial freezes after you press the call button thus the device make the call), did the wipe/data&cache, factory reset using the settings menu and OTA updates, this last one keeps saying the phone couldn't connect to check updates after several wipes/attempts.
So I followed this tutorial www[dot]android[dot]gs/install-official-xxugna8-android-4-3-jb-on-galaxy-s3-i9300/ (pretty much the same procedures as I re-flashed one of my previous phones, a Galaxy S Duos so I was kinda confident) but instead of the XXUGNA8 update I downloaded the Argentinian variant I9300UBUGNK1_I9300UVOUGNK1_ARO, followed all the steps in the tutorial and ODIN flashed successfully, the phone insta-rebooted for less than one second and stuck there (always rebooting in loop, showing the "Samsung Galaxy S3 GT-I9300" logo for less than one second), tried pulling out the battery, no luck. I can't access the recovery either but can enter in download mode. Also tried the KIES method but after asking the S/N it says "the model information that you have entered cannot be verified, the device initialization cannot proceed."
Tried to flashing it again using the same steps and files but got a NAND write error once and I stopped after that, now I am downloading the XXUGNA8 version at 50kb/s from samsung-firmware page since I started getting a 502 bad gateway error from sammobile's page.
What did I wrong? Can someone point me the necessary steps to repair this phone if there is a fix?
Here's the re-attempt log from ODIN 3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBUGNK1_I9300UVOUGNK1_I9300UBUGNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In download mode it appears as follows:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Any help would be more than welcome.
Regards.
Click to expand...
Click to collapse
Hey brother I also had similar problem today midnight here in india . and i also tried several methods to restore my phone.
i tried kies also but but it required full rom package to download ,as my internet speed is slow I tried other method and it worked. I am very happy now :victory:
just connect your GT-I9300 in download mode. use odin 3.07. download CF-Auto-Root-m0-m0xx-gti9300.tar.md5 file that we normally use for rooting. Select pda in odin select CF-Auto-Root-m0-m0xx-gti9300.tar.md5 and click start.
Its just recovery related problem. my entire data is there as it is in my phone.
Hit thanks If I helped you
I'll try it as soon as I can, and let you know if it worked.
For now thanks for the help!
dckmnn said:
I'll try it as soon as I can, and let you know if it worked.
For now thanks for the help!
Click to expand...
Click to collapse
I flashed back to stock yesterday after 2 years of Custom - just felt like it!!
I too got stuck on Samsung logo immedidately after my carrier logo appeared for a couple of seconds.
Tried reflashing again twice - again with Odin - same result
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
homer timpson said:
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
Click to expand...
Click to collapse
That though is written in the sticky's.
homer timpson said:
I flashed back to stock yesterday after 2 years of Custom - just felt like it!!
I too got stuck on Samsung logo immedidately after my carrier logo appeared for a couple of seconds.
Tried reflashing again twice - again with Odin - same result
Then I had a thought - why not boot into recovery mode and do a factory reset . I did this, the phone rebooted and immediately it went through 'normal' set up procedure.
Worth a try.
Homer
Click to expand...
Click to collapse
Sorry for the late response! The phone wasn't able to enter recovery, only download mode.
Another not robot here
[UPDATE]
I sold the phone "as is", I got it cheap and sell it almost at the same price so any mod can mark this thread as "Solved".
Easy come, easy go they say.
Regards.