[How-To] Unroot Micromax CanvasHD A116 - Micromax A116

Hey guys this is my first guide on XDA so please no negative comments please.
As many guys in CanvasHD A116 facebook group are asking about how to root and how to unroot their canvashd as they are really scared about their warranty void and all other legal stuff.
So here is a tutorial for them on how to unroot their phone and get back to stock rom.
Please follow the guide carefully and I wont be responsible for any kind of damage to your cellphone.
First of all if you are still unrooted and would like to root your cellphone then follow this guide.
Code:
[URL="http://www.droidacid.com/how-to-root-and-install-clockworkmod-on-micromax-canvashd-a116-droidacid-2/"]How to Root and Install CWM on Micromax CanvasHD A116[/URL]
So now your CanvasHD is rooted and you can perform all the tasks that require root permissions.
Now the main thing comes for which you all are waiting for, how to unroot CanvasHD.
Files to download
Stock Rom - this is the updated one without any bugs.​
SP Flash Tools
Download Canvas HD Drivers
MT6589_Android_scatter_emmc.txt
​​But as you have already rooted your cellphone so you must be having all these files already downloaded.
​1. Make sure you have installed canvas HD USB drivers by download it from above link.
2. Now you will need to extract SP flash tools.
3. After extracting Click on the Scatter-Loading button and choose the MT6589_Android_scatter_emmc.txt
4. You will see that flash tool has executed map files in applications window, select all the entries there, dont deselect as you did while flashing the recovery image.
5. In flash tool window navigate to Options> USB mode so it can be enabled and again go to Options > DA Download All > Speed > Force to high speed.
6. Now Remove battery, SIM card and memory card out from your Micromax A116.
7. Now here comes the important step: In Sp flash tool window click on Download Button, just ignore all the warnings and click Yes!
8. Now Connect your phone with battery and volume Up key pressed, this will initiate flashing your phone with fresh stock rom.
It will look like this in the image below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
So now you are back to stock rom and your cell is unrooted now.
Please comment below if you face any problem while executing the above steps.
For more detailed guide and more guides for CanvasHD A116 follow this link.

coolbud012 said:
Hey guys this is my first guide on XDA so please no negative comments please.
As many guys in CanvasHD A116 facebook group are asking about how to root and how to unroot their canvashd as they are really scared about their warranty void and all other legal stuff.
So here is a tutorial for them on how to unroot their phone and get back to stock rom.
Please follow the guide carefully and I wont be responsible for any kind of damage to your cellphone.
First of all if you are still unrooted and would like to root your cellphone then follow this guide.
Code:
[URL="http://www.droidacid.com/how-to-root-and-install-clockworkmod-on-micromax-canvashd-a116-droidacid-2/"]How to Root and Install CWM on Micromax CanvasHD A116[/URL]
So now your CanvasHD is rooted and you can perform all the tasks that require root permissions.
Now the main thing comes for which you all are waiting for, how to unroot CanvasHD.
Files to download
Stock Rom - this is the updated one without any bugs.​
SP Flash Tools
Download Canvas HD Drivers
MT6589_Android_scatter_emmc.txt
​​But as you have already rooted your cellphone so you must be having all these files already downloaded.
​1. Make sure you have installed canvas HD USB drivers by download it from above link.
2. Now you will need to extract SP flash tools.
3. After extracting Click on the Scatter-Loading button and choose the MT6589_Android_scatter_emmc.txt
4. You will see that flash tool has executed map files in applications window, select all the entries there, dont deselect as you did while flashing the recovery image.
5. In flash tool window navigate to Options> USB mode so it can be enabled and again go to Options > DA Download All > Speed > Force to high speed.
6. Now Remove battery, SIM card and memory card out from your Micromax A116.
7. Now here comes the important step: In Sp flash tool window click on Download Button, just ignore all the warnings and click Yes!
8. Now Connect your phone with battery and volume Up key pressed, this will initiate flashing your phone with fresh stock rom.
It will look like this in the image below.
​
So now you are back to stock rom and your cell is unrooted now.
Please comment below if you face any problem while executing the above steps.
For more detailed guide and more guides for CanvasHD A116 follow this link.
Click to expand...
Click to collapse
where is the stock rom sir

vaishnavashok said:
where is the stock rom sir
Click to expand...
Click to collapse
Checkout the links mentioned in the post u will get the link of the stock rom.

Not needed, removing the su and superuser.apk is enough

Related

[Q]How to root Videocon VT75C and are there any custom ROM's

Are there any rooting methods available for videocon vt75c.
And also the custom rom's are there any?
Please post reply's if anyone have tried any methods and they have successfully rooted and also installed busybox,....
Thanks in advance.......
ROOT for videocon VT75C
adityak74 said:
Are there any rooting methods available for videocon vt75c.
And also the custom rom's are there any?
Please post reply's if anyone have tried any methods and they have successfully rooted and also installed busybox,....
Thanks in advance.......
Click to expand...
Click to collapse
Download the attached file
Before connecting to PC enable USB Debugging in Settings-->Developer Options-->Enable USB Debugging
Then connect to PC make sure you have installed correct ADB drivers for your device
Then continue in process it will re-boot twice or thrice it is common and a part in process
Don't disconnect till you can see your home screen in tablet and in Batch file it shows completed :laugh:
And also let me know if you have a flash file and stock ROM for VT75C I also need it
HIT THANKS IF I HELPED YOU
Re:
srikar nvvs said:
Download the attached file
Before connecting to PC enable USB Debugging in Settings-->Developer Options-->Enable USB Debugging
Then connect to PC make sure you have installed correct ADB drivers for your device
Then continue in process it will re-boot twice or thrice it is common and a part in process
Don't disconnect till you can see your home screen in tablet and in Batch file it shows completed :laugh:
And also let me know if you have a flash file and stock ROM for VT75C I also need it
HIT THANKS IF I HELPED YOU
Click to expand...
Click to collapse
Thanks for the information i have just modified and made a rooting tutorial here : http://freelearn.pixub.com/studio/?p=252
And also please join the facebook group and bring more people to this group.This group is exclusively for Videocon VT75C Tab.
Link : https://www.facebook.com/groups/652834264760771/
Thnx...
adityak74 said:
Thanks for the information i have just modified and made a rooting tutorial here : http://freelearn.pixub.com/studio/?p=252
And also please join the facebook group and bring more people to this group.This group is exclusively for Videocon VT75C Tab.
Link : https://www.facebook.com/groups/652834264760771/
Thnx...
Click to expand...
Click to collapse
i also want custom rom for this VT75C if any please help
recovery menu on vt75c
adityak74 said:
Are there any rooting methods available for videocon vt75c.
And also the custom rom's are there any?
Please post reply's if anyone have tried any methods and they have successfully rooted and also installed busybox,....
Thanks in advance.......
Click to expand...
Click to collapse
actually we have android recovery 3e of version 4.1.01 on this tab..
but whenever i try to update superuser using recovery menu i see the message that the update package is invalid i tried many different versions of update.zip packages.
But they were of no use..
once rooted, we can try installing stock roms, cwm etc. on this tab!!
even we can try update.zip directly by placing the "update.zip" file in external sd
*open stock file explorer
*place the update.zip file in the root of external sd
*the tab gives u a popup stating that "update available, do u want to update?"
rooting vt85c?
someone please tell me how to root videocon vt85c ?
plz
needed custom rom for videcon vt85c
Do any custom rom ,cwm,root for videcon vt85c tab
Sucessfully Rooted Videocon VT85c...
Good New for VT85c users...I found a way to root this tab..i am unable to post youtube link as i am new here, but serch for youtube you will find brand new video regarding this made by me, it will help you doing so...:good search by entering my full name,you will be able to find it easily..)
Can someone please tell me how to boot in recovery mode ?
currently its locked ,friend forgot his gmail password.
usb debug is also off
Sorry fro bumping old thread...
*Update*
ok fixed it myself using RockChip Android Tool (press vol+ vol- and power. connect with USB cablet , install USB driver)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
keep buttons pressed, mark no 3.misc and Run.
On next start it will start formatting data.
Done !
Vt85c bricked
My phone vt85c got bricked so can u help me...
Thank u in advance

[DUMP] System/Boot/Recovery Dump from Yureka

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here​
reserved
good to see a dev like u here,its enough for expecting support for Yureka:good:
That was so quick mate thanks for sharing it
will look forward for more development
Can someone please upload the build.prop only?
CosmoDroid said:
Can someone please upload the build.prop only?
Click to expand...
Click to collapse
here
https://github.com/YUPlayGod/android_device_yu_tomato/blob/cm-11.0/system.prop
good work
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Need to flash
Ashok sha said:
Can anyone pls tell me how to flash this file??? And my phone is rooted and in cwm recovery.... But i want stock recovery to flash the update?? So plsss
Click to expand...
Click to collapse
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
androidgalaxyman said:
the recovery stock is inside the zip http://forum.xda-developers.com/yureka/development/tool-one-tool-t3006128
Click to expand...
Click to collapse
Bro i downloaded the zip...now pls tell me how to flash this??
Steps
Ashok sha said:
Bro i downloaded the zip...now pls tell me how to flash this??
Click to expand...
Click to collapse
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
androidgalaxyman said:
1. Enable android debugging mode in the mobile device.
2. using the usb cabel to connect and download & install PDA Net drivers.
3. Extract the package and go inside folder called "TREASU* like that.
4. click open the command line windows.
5. Type adb devise , it will show the list of devices connected. This is actually cross checking your devices properly connected with debugger.
6. Moreover go to the mobile setting, -> security -> tick unknown sources.
7. in the same command line go back upward one directory, you can find all*****.bat file, run it.
8. it will give the steps.
9. First do unlock the boot loader.
10. restart the mobile , then again install the customer recovery.
11. Then again using this tool to root.:laugh:
Tool is straightforward to use.
Click to expand...
Click to collapse
Bro shall i use flashify app to install this recovery.img
Why u want to do that
Ashok sha said:
Bro shall i use flashify app to install this recovery.img
Click to expand...
Click to collapse
Hi Mate, whats the show stopper to this procedure to do with that tool. its good to use that.
I wanted to go back to the Stock CM11S but couldn't download the flashable zip from the Cyngn support page. Can anyone instruct how to use this dump to revert back to CM11S?
Download from Yu Forum and also follow easy steps mentioned there. Here is link
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
Bricked Qualcomm 9008 mode
vishal_android freak said:
I would keep it short. Don't ask questions. This device dump is straight away coming from the device. So if you want to get started with something, here is the boot, system and recovery images. If you need anything else, let me know below in the comments. Please do not ask for review videos, benchmark tests, camera quality, blah, blah. You have the YU forum to ask such questions. Thank you and enjoy.
Download: here​
Click to expand...
Click to collapse
Hi there, could you please provide me the complete eMMC dump of our Yu, off course except all partitions that could be found inside CM11 stock fastboot update zip (except these partitions: NON-HLOS/modem, boot, recovery, system, userdata, aboot, hyp, rpm, sbl1, tz).
I really need those files to recover my Yu. I'm leaving in Indonesia, so I can't get it replaced.

Unable to install ROM File on P780 4GB

Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
vikili said:
Hello,
i root my p780, google play service app was not working properly so i download p780 source code and tried to copy paste system all apps then operating system crashed once turn on the mobile only logo stuck bootloader also not coming and Unable to Install Any ROM File on P780 4GB, i tried with SP Flash tool its stuck on searching i installed MTK65xx preloader also same stuck on searching, I visited lenovo service center but service men told he can't install latest update for this mobile. somebody please tell me how can i install the rom file....
Click to expand...
Click to collapse
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
stympy said:
What you have to do is to install the drivers and flash any other firmware. Look on my post Rooting tutorial for kitkat, in q&a section.
Pm me if you dont understand something.
Sent from my P780 using XDA-Developers mobile app
Click to expand...
Click to collapse
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
vikili said:
You are not understanding my problem my phone is dead once turn on its showing only like this below image, so give proper solution.
Click to expand...
Click to collapse
The proper solution is to reflash your firmware , or if you can enter to recovery is to factory reset!
See what is going on. If you cant enter in to the recovery you must reflash your original firmware.
Tell me if you need to reflash the stock firmware.
How Can i Reflash can you guide me
vikili said:
How Can i Reflash can you guide me
Click to expand...
Click to collapse
Hi.
Read this small tutorial twice.
Here are the drivers: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12
Look at the bottom of that page.
Install first the exe file, then reboot your PC. WARRNING: you must have Win.XP or Win.7 installed.
Download stock firmware from here: http://forum.xda-developers.com/lenovo-p780/development/p780-stock-rom-links-t2842399
After flash you will have firmware: ROW S124 JellyBean. If you want KitKat you must do OTA Updates or download those packs and install them from your phone by turn. OTA is my advice till S228. S2287 is the lates and last official updates.
Download SP Flash Tools from here: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Unzip all to separare folders.
Next step is: Power down your phone.
Open device manager.
Plug the usb cable to your phone and to the PC.
In the device manager you will si first MTK65XX... device detected and after this drivers should install.
After drivers are installed disconnect the phone.
Now open spflash tool v5
Load scater file from the folder of the firmware.
In the download tab not button select firmware upgrade - nothing else.
Now press download button and plug the usb cable to your phone.
Flashing should start.
After flash one green circle with ok should appear.
After this remove the usb cable and start your phone.
If your phone is not starting you must repeat the procedure with the new preloader.
Look on your phone box and see if your phone is made after 03.2014.
If it is you must replace curent preloader with new one.
Link to new preloader: https://drive.google.com/folderview...VQ3pJeG9vTlh4Y3pMUG9ES3FtX21ZdjlwVzY3VWc#list
Use only that preloader.
Good Luck. :good:
why that Sp Flash Tool Stuck on Searching
vikili said:
why that Sp Flash Tool Stuck on Searching
Click to expand...
Click to collapse
Could be drivers or... you must reset the phone right before usb cable is inserted.

Help request; steps to follow from stock to unlocked and custom recovery

Is their somebody who can give me some guidance what steps to take to customize your phone with a custom rom and custom recovery. I've been reading the web bow but somehow it seems no unlocking and no custom recovery is required and where flashing goes by a external flash program (fs flash where you use a txt file and from their the program downloads itself the rom.... Now I am confused...
I am only used to HTC, where I need to unlck boatloader, s-off, flash custom recovery and then flash (through) TWRP a custom Tom. How does it work with a Elephone P9000?
Here is the tutorial of P9000 and P9000lite root.
Preparation:
1. Make sure that your computer installed a driver
(Downloaad link:https://mega.co.nz/#!55BQkKiR!OPBrnj7SXxsUbuchAjV8orT9SMAOMpbDesYTMO2DDHY)
2. Flash tool (SP flash tool recommended, download link:https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk)
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link: https://mega.nz/#!mh8UxBpY!yjrvKqtxP6VUQKfe-cunpKhCWZUE_vo0jP88wpLiFBA
2. Unzip the file that you have downloaded just now.
3. Copy zipe file named "superSU_1.zip、superSU_2.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p9000-recovery" which you have just saved in your computer.
5.Click download and then connect your phone with computer.
6. Turn off your phone, press "power" + "VOL +" to enter recovery mode. ("VOL +" to choose, "power" to confirm)
8.Click 'install', find 'supersu_1.zip', 'supersu_2.zip'
9.First click 'supersu_1.zip', then swipe to confirm 'flash'
10. Click the 'home' button to return to the home page, click 'install', find 'supersu_2.zip', click 'supersu_2.zip', then swipe to confirm flash
11.Congratulations!!! You have finished the whole process, now enjoy.
Then do the same with the ROM that you like (Step 6-10)
Please hit Thanks if I helped you!
LordWurstbrot said:
Here is the tutorial of P9000 and P9000lite root.
Preparation:
1. Make sure that your computer installed a driver
(Downloaad link:https://mega.co.nz/#!55BQkKiR!OPBrnj7SXxsUbuchAjV8orT9SMAOMpbDesYTMO2DDHY)
2. Flash tool (SP flash tool recommended, download link:https://mega.nz/#!ixdnhDLK!oOaAsJrcvJI0vH3fTsUOYjtDxQ_HT61E-_iuo6fTuKk)
1. Download the file from below link. you're going to save to somewhere you can remember it, for this tutorial, I'm going to use my desktop.
Dnowload link: https://mega.nz/#!mh8UxBpY!yjrvKqtxP6VUQKfe-cunpKhCWZUE_vo0jP88wpLiFBA
2. Unzip the file that you have downloaded just now.
3. Copy zipe file named "superSU_1.zip、superSU_2.zip" to your SD card and then turn off the phone.
4. Open flash tool, Click "scatter-loading" and choose the file named "p9000-recovery" which you have just saved in your computer.
5.Click download and then connect your phone with computer.
6. Turn off your phone, press "power" + "VOL +" to enter recovery mode. ("VOL +" to choose, "power" to confirm)
8.Click 'install', find 'supersu_1.zip', 'supersu_2.zip'
9.First click 'supersu_1.zip', then swipe to confirm 'flash'
10. Click the 'home' button to return to the home page, click 'install', find 'supersu_2.zip', click 'supersu_2.zip', then swipe to confirm flash
11.Congratulations!!! You have finished the whole process, now enjoy.
Then do the same with the ROM that you like (Step 6-10)
Please hit Thanks if I helped you!
Click to expand...
Click to collapse
Much appreciated, great thx. So I was on the right track. Good to have confirmation...[emoji3]
I succeeded, took me some time to figure out SP Flash Tool (to be more precise how to select the recovery.img) but i succeeded.
very big thanks.
Sent from my P9000 using XDA-Developers mobile app
No problem[emoji106]
Please hit Thanks if I helped you!
how many time it takes since we click download button on flash tool?
tolias77 said:
how many time it takes since we click download button on flash tool?
Click to expand...
Click to collapse
Just a few seconds! Make sure you're phone is off and then connect the phone via USB!
Please hit Thanks if I helped you!
In that case, I do something wrong. I have elephone P9000 lite
On witch version are you?
tolias77 said:
In that case, I do something wrong. I have elephone P9000 lite
Click to expand...
Click to collapse
Please hit Thanks if I helped you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You are on Stock and rooted right?
Please hit Thanks if I helped you!
It's not rooted

[Guide] [TOOL] One-Click Flash your A6000 with many rom

Hey, everyone! Now we introduce you our product: King Flasher.
It's an one-click flash tool for android users.
You can easily flash both CM, MIUI, Flyme, ResurrectionRemix, XOSP, Bliss and many other rom with this tool.
For those who don't have a PC, you can use the mobile version.
Go to download: King Flasher
[Guide]:
1. Install King Flasher on your computer and make sure it can access to the internet.
2. Connect your phone to computer with USB cable and open USB debbuging.
How to open USB debbuging: Settings > About device > Tap “BUILD NUMBER” 7 times > Back to Settings > Developer options > Select “USB Debbuging”.
3. Please open King Flasher and choose a ROM you like, then click “Flash”.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Wait for downloading ROM.
5. After the download finished, King Flasher will flash your phone automaticlly. It will take about 5-10 minutes to finish.
6. Your phone will reboot to the new system when it finish.
FAQs:
Q: Do I need to unlock my device?
A: Your device must be unlocked. For some devices like HTC, this tool will automatically unlock it. For other devices like Xiaomi which this tool can’t unlock automatically, you need to unlock it manually at first.
Q: Do I need to root my device?
A: Our tool will automatically root your device through the flashing process if it’s necessary.
Q: Do I need to install recovery?
A: This tool will automatically install recovery in your device. All you need to do is make sure that your device is unlocked.
Q: Does it have GApps?
A: Our tool will remain the ROM which it should be. If the ROM don’t contain GApps, then you won’t get GApps. But you can flash it by yourself. See how to flash GApps:
https://youtu.be/og-ne_wLbVA
Q: Can I flash another zip such as root zip, fix zip with this tool?
A: You can use our tool to flash some patch zip including GApps, root or fix zip. See how to use it at here: https://youtu.be/og-ne_wLbVA
Download the GApps at here: http://opengapps.org
Q: Is this tool safe?
A: Our software is clean and safe. It doesn’t contain any malware or spyware. You can check the analysis by VirusTotal: https://www.virustotal.com/en/file/...8c908b6bb2b9e4f6d8933ec53c6b2ed82cf/analysis/
Q: Will it brick my phone?
A: The ROMs in this tool have been tested. If you flash the ROMs we provide in this tool, then it won’t damage or brick your phone. If you use our tool to flash other ROM downloaded by yourself, then it may cause error.
Q: Can I use this tool to root my phone? What devices can be rooted with this tool? Is it safe?
A: Yeah, you can use our tool to root your phone but the result depends on your device and system. You can have a try of rooting your device with this tool. It won’t damage or brick your phone.
Q: Is it support XXX?
A: We are still working to support more devices. Please download the software to check if your device has been supported.
Q: Why does it ask for permission to access my contacts, calls and text messages?
A: It need the permission so that it can back up these data before the flash.
Here is some reminds for using mobile version:
1. You must unlock your phone by yourself before flashing.
2. The mobile version depends on root permission, so your device must be rooted. Though our app provide this function, it's not powerful enough to root every devices. You can use other tool to root your phone at first.
3. Some security software may identify our app as malware for mistake. Please don't be worried and install it anyway.
Sooo, an external flashify basically... How is this better than the native sideload?
Sent from my Lenovo A6000 using Tapatalk
We need to have root on phone or can flash without root ?
Sparco21 said:
We need to have root on phone or can flash without root ?
Click to expand...
Click to collapse
You don't have to root your device.
Can I flash if my phone already have a custom rom?
EstherTakumi said:
Can I flash if my phone already have a custom rom?
Click to expand...
Click to collapse
Yeah
It just flashes rom, or we can flash multiple rom in single device like we have two windows in single system?
Hi Good Day sir!
King Flasher said:
You don't have to root your device.
Click to expand...
Click to collapse
may i ask if i use this for my lenovo a6000 will it unlock my device?

Categories

Resources