Hey guys, i'm kind of a newbie when it comes to rooting & flashing. here what i did
1. flashed with Odin Siyah-s2-v4.0.1 kernel and all went well
2. went to the cwm to install CM10 after factory reset/ wipe
and then i get stuck on the yellow triangle boot screen with no where to go. i tried few kernels with no luck all compatible to JB
im stuck :/
Please tell us which firmware u are currently on now, and which model do u have?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Please tell us which firmware u are currently on now, and which model do u have?
Model : GT-i9100
Firmware : before wipe JB 4.1.2
Click to expand...
Click to collapse
DiesFrae said:
Model : GT-i9100
Firmware : before wipe JB 4.1.2
Click to expand...
Click to collapse
Siyah v4 is not compatible with JB 4.1.2. Siyah v6 is.
If you cannot get into recovery menu, try flashing Siyah v6 beta 5 kernel via Odin. Then try to enter Recovery.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Siyah v4 is not compatible with JB 4.1.2. Siyah v6 is.
If you cannot get into recovery menu, try flashing Siyah v6 beta 5 kernel via Odin. Then try to enter Recovery.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
trying this now, after going to recovery shall i install CM10 doing a wipe ? and if i got stuck with the yellow triangle boot what may be causing the problem
DiesFrae said:
trying this now, after going to recovery shall i install CM10 doing a wipe ? and if i got stuck with the yellow triangle boot what may be causing the problem
Click to expand...
Click to collapse
Yup, wipe data, cache and dalvik cache in CWM and flash CM10 and then GApps zip. Then reboot.
If you still get into a bootloop, it could be an issue with the CM10 nightly. Check for corrupted or broken file. Or download another nightly.
Good luck!
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yup, wipe data, cache and dalvik cache in CWM and flash CM10 and then GApps zip. Then reboot.
If you still get into a bootloop, it could be an issue with the CM10 nightly. Check for corrupted or broken file. Or download another nightly.
Good luck!
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
also got stuck with the yellow triangle boot screen.. btw im flashing cm10 stable
DiesFrae said:
also got stuck with the yellow triangle boot screen.. btw im flashing cm10 stable
Click to expand...
Click to collapse
Are you sure its bootlooping? The first boot usually takes time.
Try doing a data, cache and dalvik wipe again.
Update:
Just re-read ur post now. There is NO STABLE CM10 got the I9100!! Are you sure you downloaded the right ROM?
"To err is human, to forgive is divine"
Sent from my SGS II
DiesFrae said:
Hey guys, i'm kind of a newbie when it comes to rooting & flashing. here what i did
1. flashed with Odin Siyah-s2-v4.0.1 kernel and all went well
2. went to the cwm to install CM10 after factory reset/ wipe
and then i get stuck on the yellow triangle boot screen with no where to go. i tried few kernels with no luck all compatible to JB
im stuck :/
Click to expand...
Click to collapse
i had some issues with siyah kernel and cyanogenmod 10.1,
what helped for me was trying another kernel ( dorimanx kernel v 8.13 ) in combination with cyanogenmod 10.1
i cant find the download link for the dorimanx kernel v 8.13 maybe someone could post it here for you.
http://www.get.cm/?device=i9100 here u could find the dorimanx 10.1 firmware
Good Luck
Mate 8.13 is not for cm10.1 its for stock/custom 4.1.2 , cm10.1 is 4.2.2 right kernel is 9.13.
Sent from my GT-I9100 using xda premium
w.jansen1234 said:
i had some issues with siyah kernel and cyanogenmod 10.1,
Click to expand...
Click to collapse
That wouldn't be a problem here mate, because when flashing CM10, Siyah kernel is replaced by the stock CM kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
asychni share
stopro said:
Mate 8.13 is not for cm10.1 its for stock/custom 4.1.2 , cm10.1 is 4.2.2 right kernel is 9.13.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
your'e very right, sorry about the misinformation.
Related
hi
i have installed siayh kernel v6 on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start but i still can enter recovery mode and download mode
i try two versions of siyah kernel and it the same problem how can i make it work without problem ?
cobra-mr said:
hi
i have installed siayh kermyself.
on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start but i still can enter recovery mode and download mode
i try two versions of siyah kernel and it the same problem how can i make it work without problem ?
Click to expand...
Click to collapse
Im currently trying to find a solution/answer to this myself
My friend has an s2 and no matter what kernel or version he tries the same problem results.
Done all the correct procedures for ROM gapps and kernel flashes, tried reboots and re flashes but the black screen appears after the kernel boot picture.
wmhsgs3 said:
Im currently trying to find a solution/answer to this myself
My friend has an s2 and no matter what kernel or version he tries the same problem results.
Done all the correct procedures for ROM gapps and kernel flashes, tried reboots and re flashes but the black screen appears after the kernel boot picture.
Click to expand...
Click to collapse
if you found a solution tell me ok
and if i find one i will tell you
If you are on CM 10.1 , which is android 4.2.2 , siyah kernel dosent support it. Try dormanix or the CM kernel.
Sent from my GT-I9100 using xda app-developers app
cobra-mr said:
hi
i have installed siayh kernel v6 on s2 4.2.2 rom and after i did restart the log of the kernel appear then the screen become black and the phone don't start
Click to expand...
Click to collapse
Siyah v6 doesn't support JB 4.2.2. But siyah v5 vsync does..
"To err is human, to forgive is divine"
Sent from my SGS II
OK thanks guys. Will try dorminax first.
wmhsgs3 said:
OK thanks guys. Will try dorminax first.
Click to expand...
Click to collapse
Good luck and let us know how it turns out..
"To err is human, to forgive is divine"
Sent from my SGS II
Will be tomorrow when I'm at work with my mate. Thanks again!
yes thats worked fine on the 4.2.2 AVATAR ROM but says the ISP is outside of our location, UK.
wmhsgs3 said:
yes thats worked fine on the 4.2.2 AVATAR ROM but says the ISP is outside of our location, UK.
Click to expand...
Click to collapse
Good to know it worked! :thumbup:
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Soare23 said:
If you are on CM 10.1 , which is android 4.2.2 , siyah kernel dosent support it. Try dormanix or the CM kernel.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I tried dormanix and it work
THanks a lot
cobra-mr said:
I tried dormanix and it work
THanks a lot
Click to expand...
Click to collapse
Good for u!
Please add [SOLVED] to the title of ur post so that others with similar problems can get help.
"To err is human, to forgive is divine"
Sent from my SGS II
Hey, i have an I9100 from Claro (BR), and i'm running Siyah kernel + Sensation ROM (4.0.4).
I'm willing to update from ICS to JB, but:
1 - I cant use my recovery to flash any JB rom, and
2 - If i flash a JB recovery, my phone wont boot either to OS or recovery.
What should i do?
Thanks.
tchelobh said:
1 - I cant use my recovery to flash any JB rom, and
2 - If i flash a JB recovery, my phone wont boot either to OS or recovery.
Click to expand...
Click to collapse
Why can't u use your recovery to flash JB?
And from where did u get a 'JB recovery'?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Why can't u use your recovery to flash JB?
And from where did u get a 'JB recovery'?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I've read somewhere here that there are specific recovery's to JB and ICS. And when i try to install some JB rom (like CM10.1) i got an "Status 7" error.
Just flash the latest Siyah/Dori kernel for ICS then, and ur good to go.
Since ur on 4.0.4, I suggest u read about 'eMMC Brickbug' too, just to be careful.
AFAIK, Status 7 error could be because of a corrupted download or trying to flash the wrong ROM for your device. Please check both.
"To err is human, to forgive is divine"
Sent from my SGS II
Use odin to flash siyah 5.0.1.tar off gokhanmoral.com, then proceed to wipe system. And data/cache and then flash your desired jb rom through siyah recovery
Sent from my GT-I9100 using Tapatalk 2
HI,
Galaxy s2 i9100, stuck on "Samsung galaxy S II gt-i9100" screen, unable to get into recovery.
The problem occurred after updating CWM recovery from rom manager.
What can I do?
Should i try flash stock rom via Odin? Download mod still reachable.
Or should i try flash recovery?
comming from wanam 14.1.
any suggestions?
Thanks in advance.
Which version of Android is Wanam 14?
Since u cannot enter recovery, flash via Odin is ur only option. I don't think flashing a recovery would help..
I have heard many people warn against using ROM Manager with i9100.
"To err is human, to forgive is divine"
Sent from my SGS II
Never update through rom manager.
i9100
alliance 7.2
v6.0b5
nekf2
4.1.2
apex88 said:
4.1.2
Click to expand...
Click to collapse
Then flash stock firmware via Odin.
And next time, stay away from ROM Manager.
"To err is human, to forgive is divine"
Sent from my SGS II
started stock rom flash via odin, wish me luck
apex88 said:
started stock rom flash via odin, wish me luck
Click to expand...
Click to collapse
Do let know what happens..:thumbup:
"To err is human, to forgive is divine"
Sent from my SGS II
managed to flash stock rom, but system UI crashes all the time, i'll try full wipe/factory reset.
apex88 said:
managed to flash stock rom, but system UI crashes all them time, i'll try full wipe
Click to expand...
Click to collapse
I do hope u haven't got 4.0.4 now..
"To err is human, to forgive is divine"
Sent from my SGS II
no, its 4.1.2 stock
Update:
Full wipe did the job, got the UI running with no problems.
Thanks for the help guys.
You ever heard of efs folder? Bk it up if you haven't
i9100
alliance 7.2
v6.0b5
nekf2
apex88 said:
no, its 4.1.2 stock
Update:
Full wipe did the job, got the UI running with no problems.
Thanks for the help guys.
Click to expand...
Click to collapse
Happy to help!
Backup EFS too as soon as possible.
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Added [SOLVED].
Got wanam 14.4 and restoring from titanium now, will do efs backup as soon as titanium is done.
Do three
Ktool of playstore
Gs2 repair of playstore
And manual to ext Sd and of phone. 'I count as one'
i9100
alliance 7.2
v6.0b5
nekf2
Some custom ROMs also create EFS backups automatically too.
"To err is human, to forgive is divine"
Sent from my SGS II
How did you do the full wipe in ODIN ?
BorgCymru said:
How did you do the full wipe in ODIN ?
Click to expand...
Click to collapse
Full wipe was done in stock recovery, not Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Ah right. I can't get into recovery
BorgCymru said:
Ah right. I can't get into recovery
Click to expand...
Click to collapse
Bootloop or bricked?
"To err is human, to forgive is divine"
Sent from my SGS II
Bootloop now. ALl I get is the operator logo then the big S screen.
Trouble is being partially sighted going through all the threads and finding out whats the 'latest' method is now a hard task
I'm trying to find a working CM 9 now to use with ODIN as I can get it to download mode.
Just trying this now
http://forum.cyanogenmod.org/topic/45674-cm9-instructions-discussion-of-nightlies/
The- Make sure you're running ICS bootloaders lower than LPH: part which seems to have got me to a recovery screen
Hi im looking to do something with my SG2 im half way through my 2 year contract and need to inject new life into it
at the moment im running the official spanish version of JB which i installed through Odin
Ive looked at
http://forum.xda-developers.com/showthread.php?t=2036229
But ive always been conscious about trying anything as ive been scared about the SuperBrick bug
Well the current JB i have is draining the Battery so im looking to try this Cyanogen
I checked to see if i have ClockworkMod Recovery installed but it boots into PhilZ ouch 4 CWM Base version 6.0.2.7
I assume this is a personalised version of CWM do i need to install another version?
am i ok to progress the CyanogenMod install??
Phone Details
Model GT-i9100
Android Version 4.1.2
Basband Version I9100XXLS8
Kernel Version 3.0.31-816988
Many Thanks
shamonee said:
But ive always been conscious about trying anything as ive been scared about the SuperBrick bug
Well the current JB i have is draining the Battery so im looking to try this Cyanogen
I checked to see if i have ClockworkMod Recovery installed but it boots into PhilZ ouch 4 CWM Base version 6.0.2.7
I assume this is a personalised version of CWM do i need to install another version?
am i ok to progress the CyanogenMod install??
Click to expand...
Click to collapse
Brick bug only affects 4.0.4 firmwares.
Yes, you may proceed using Philz CWM recovery.
Just do a full wipe before flashing CM.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Brick bug only affects 4.0.4 firmwares.
Yes, you may proceed using Philz CWM recovery.
Just do a full wipe before flashing CM.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
thanks for your swift response
:good:
so i wipe before flashing the rom not afterwards?
just double checking
shamonee said:
so i wipe before flashing the rom not afterwards?
just double checking
Click to expand...
Click to collapse
It doesnt really matter as long as u wipe..
But since ur gonna wipe it anyway, why not wipe before flashing (to get a clean slate for CM)?
"To err is human, to forgive is divine"
Sent from my SGS II
I have the supernexus 2 rom and i'm trying to flash dorimanx kernel.
After flashing the kernel and after i get the dorimanx logo the screen would turn black and it won't boot.
i tried the same with different versions of dorimanx kernel and also siyah kernel but they also do not work.
What does the people in the supernexus thread say?
Stick with the kernel the dev posted for the ROM.
Sent from the little guy
gastonw said:
What does the people in the supernexus thread say?
Stick with the kernel the dev posted for the ROM.
Sent from the little guy
Click to expand...
Click to collapse
They was able to flash the kernel without any problems, i don't know what's wrong with my phone.
Go back to whatever kernel it suggesed in the OP and try Dorimanx again.
Sent from the little guy
Can you get into recovery? If so, mount your sd card and load another ROM, flash it, don't forget to factory reset, wipe cache, dalvic. Good luck
I did go back to cyanogenmod kernel which is the main kernel for this rom by using a backup.
I still can't use dorimanx kernel.
I need it for the battery life optimizations.
If it won't work i might go to CM rom or aokp, but i don't need all of the customizations they offer.
I know this sounds dumb, but have u tried wiping cache, dalvik and fix permissions after flashing Dori?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
I know this sounds dumb, but have u tried wiping cache, dalvik and fix permissions after flashing Dori?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I did, still not working .
But i just tried v7.5 and it worked, i don't know why.
marzooqy said:
I did, still not working .
But i just tried v7.5 and it worked, i don't know why.
Click to expand...
Click to collapse
U mean Dori 7.5? That's for ICS right? Super nexus v2 is JB 4.2.2, isn't it?
"To err is human, to forgive is divine"
Sent from my SGS II