I have the supernexus 2 rom and i'm trying to flash dorimanx kernel.
After flashing the kernel and after i get the dorimanx logo the screen would turn black and it won't boot.
i tried the same with different versions of dorimanx kernel and also siyah kernel but they also do not work.
What does the people in the supernexus thread say?
Stick with the kernel the dev posted for the ROM.
Sent from the little guy
gastonw said:
What does the people in the supernexus thread say?
Stick with the kernel the dev posted for the ROM.
Sent from the little guy
Click to expand...
Click to collapse
They was able to flash the kernel without any problems, i don't know what's wrong with my phone.
Go back to whatever kernel it suggesed in the OP and try Dorimanx again.
Sent from the little guy
Can you get into recovery? If so, mount your sd card and load another ROM, flash it, don't forget to factory reset, wipe cache, dalvic. Good luck
I did go back to cyanogenmod kernel which is the main kernel for this rom by using a backup.
I still can't use dorimanx kernel.
I need it for the battery life optimizations.
If it won't work i might go to CM rom or aokp, but i don't need all of the customizations they offer.
I know this sounds dumb, but have u tried wiping cache, dalvik and fix permissions after flashing Dori?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
I know this sounds dumb, but have u tried wiping cache, dalvik and fix permissions after flashing Dori?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I did, still not working .
But i just tried v7.5 and it worked, i don't know why.
marzooqy said:
I did, still not working .
But i just tried v7.5 and it worked, i don't know why.
Click to expand...
Click to collapse
U mean Dori 7.5? That's for ICS right? Super nexus v2 is JB 4.2.2, isn't it?
"To err is human, to forgive is divine"
Sent from my SGS II
Related
So today i felt like restoring a previous nandroid backup i made a year ago. i was on 4.0.4 stock+siyah and wanted to go to jelly bean if im not mistaken (cant remember for sure tho). Thing is i tried to wipe data/factory reset, wipe cache, wipe dalvik, but still, i cannot get rid of this bootloop. any ideas ? thanks
PD: id prefer not flashing a stock rom with odin nor restoring back to my other backup if possible
That may be what you'd prefer, but think about it logically given what you've already tried/what hasn't worked. You don't have any other option.
Am confused..
Is the OP trying to restore 4.0.4 or is he already on it?
"To err is human, to forgive is divine"
Sent from my SGS II
i was on 4.0.4 and tried to restore a jelly bean nandroid backup, i tried wiping everything i could but nothing seems to solve the bootloop. any other idea thats not flashing a stock rom ?
You full wipe on 4.0.4?
What's your cwm. Sd partis maybe. Don't wipe on 4.0.4
i9100
alliance 7.2
v6.0b5
nekf2
Poroto said:
i was on 4.0.4 and tried to restore a jelly bean nandroid backup, i tried wiping everything i could but nothing seems to solve the bootloop. any other idea thats not flashing a stock rom ?
Click to expand...
Click to collapse
Since solving the bootloop is more important now, I suggest you do what MistahBungle said..
Flash a stock JB firmware via Odin, then if bootloop is overcome, you can root it and restore your JB backup.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Since solving the bootloop is more important now, I suggest you do what MistahBungle said..
Flash a stock JB firmware via Odin, then if bootloop is overcome, you can root it and restore your JB backup.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Good point :thumbup:
i9100
alliance 7.2
v6.0b5
nekf2
yea just flashed through odin, had no more patience and wanted my phone back haha. tahnks anyway guys
Poroto said:
yea just flashed through odin, had no more patience and wanted my phone back haha. tahnks anyway guys
Click to expand...
Click to collapse
Happy to help..
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Amazing that the guy who suggested the most logical (and only) fix got ignored for 3.5 hours, yet the OP ends up accepting the same advice from other people. The stupidity of people on here never ceases to amaze me.
MistahBungle said:
Amazing that the guy who suggested the most logical (and only) fix got ignored for 3.5 hours, yet the OP ends up accepting the same advice from other people. The stupidity of people on here never ceases to amaze me.
Click to expand...
Click to collapse
Some people just need a little more re-assurance, I guess..
"To err is human, to forgive is divine"
Sent from my SGS II
Hi im looking to do something with my SG2 im half way through my 2 year contract and need to inject new life into it
at the moment im running the official spanish version of JB which i installed through Odin
Ive looked at
http://forum.xda-developers.com/showthread.php?t=2036229
But ive always been conscious about trying anything as ive been scared about the SuperBrick bug
Well the current JB i have is draining the Battery so im looking to try this Cyanogen
I checked to see if i have ClockworkMod Recovery installed but it boots into PhilZ ouch 4 CWM Base version 6.0.2.7
I assume this is a personalised version of CWM do i need to install another version?
am i ok to progress the CyanogenMod install??
Phone Details
Model GT-i9100
Android Version 4.1.2
Basband Version I9100XXLS8
Kernel Version 3.0.31-816988
Many Thanks
shamonee said:
But ive always been conscious about trying anything as ive been scared about the SuperBrick bug
Well the current JB i have is draining the Battery so im looking to try this Cyanogen
I checked to see if i have ClockworkMod Recovery installed but it boots into PhilZ ouch 4 CWM Base version 6.0.2.7
I assume this is a personalised version of CWM do i need to install another version?
am i ok to progress the CyanogenMod install??
Click to expand...
Click to collapse
Brick bug only affects 4.0.4 firmwares.
Yes, you may proceed using Philz CWM recovery.
Just do a full wipe before flashing CM.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Brick bug only affects 4.0.4 firmwares.
Yes, you may proceed using Philz CWM recovery.
Just do a full wipe before flashing CM.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
thanks for your swift response
:good:
so i wipe before flashing the rom not afterwards?
just double checking
shamonee said:
so i wipe before flashing the rom not afterwards?
just double checking
Click to expand...
Click to collapse
It doesnt really matter as long as u wipe..
But since ur gonna wipe it anyway, why not wipe before flashing (to get a clean slate for CM)?
"To err is human, to forgive is divine"
Sent from my SGS II
Hey guys, i'm kind of a newbie when it comes to rooting & flashing. here what i did
1. flashed with Odin Siyah-s2-v4.0.1 kernel and all went well
2. went to the cwm to install CM10 after factory reset/ wipe
and then i get stuck on the yellow triangle boot screen with no where to go. i tried few kernels with no luck all compatible to JB
im stuck :/
Please tell us which firmware u are currently on now, and which model do u have?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Please tell us which firmware u are currently on now, and which model do u have?
Model : GT-i9100
Firmware : before wipe JB 4.1.2
Click to expand...
Click to collapse
DiesFrae said:
Model : GT-i9100
Firmware : before wipe JB 4.1.2
Click to expand...
Click to collapse
Siyah v4 is not compatible with JB 4.1.2. Siyah v6 is.
If you cannot get into recovery menu, try flashing Siyah v6 beta 5 kernel via Odin. Then try to enter Recovery.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Siyah v4 is not compatible with JB 4.1.2. Siyah v6 is.
If you cannot get into recovery menu, try flashing Siyah v6 beta 5 kernel via Odin. Then try to enter Recovery.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
trying this now, after going to recovery shall i install CM10 doing a wipe ? and if i got stuck with the yellow triangle boot what may be causing the problem
DiesFrae said:
trying this now, after going to recovery shall i install CM10 doing a wipe ? and if i got stuck with the yellow triangle boot what may be causing the problem
Click to expand...
Click to collapse
Yup, wipe data, cache and dalvik cache in CWM and flash CM10 and then GApps zip. Then reboot.
If you still get into a bootloop, it could be an issue with the CM10 nightly. Check for corrupted or broken file. Or download another nightly.
Good luck!
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Yup, wipe data, cache and dalvik cache in CWM and flash CM10 and then GApps zip. Then reboot.
If you still get into a bootloop, it could be an issue with the CM10 nightly. Check for corrupted or broken file. Or download another nightly.
Good luck!
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
also got stuck with the yellow triangle boot screen.. btw im flashing cm10 stable
DiesFrae said:
also got stuck with the yellow triangle boot screen.. btw im flashing cm10 stable
Click to expand...
Click to collapse
Are you sure its bootlooping? The first boot usually takes time.
Try doing a data, cache and dalvik wipe again.
Update:
Just re-read ur post now. There is NO STABLE CM10 got the I9100!! Are you sure you downloaded the right ROM?
"To err is human, to forgive is divine"
Sent from my SGS II
DiesFrae said:
Hey guys, i'm kind of a newbie when it comes to rooting & flashing. here what i did
1. flashed with Odin Siyah-s2-v4.0.1 kernel and all went well
2. went to the cwm to install CM10 after factory reset/ wipe
and then i get stuck on the yellow triangle boot screen with no where to go. i tried few kernels with no luck all compatible to JB
im stuck :/
Click to expand...
Click to collapse
i had some issues with siyah kernel and cyanogenmod 10.1,
what helped for me was trying another kernel ( dorimanx kernel v 8.13 ) in combination with cyanogenmod 10.1
i cant find the download link for the dorimanx kernel v 8.13 maybe someone could post it here for you.
http://www.get.cm/?device=i9100 here u could find the dorimanx 10.1 firmware
Good Luck
Mate 8.13 is not for cm10.1 its for stock/custom 4.1.2 , cm10.1 is 4.2.2 right kernel is 9.13.
Sent from my GT-I9100 using xda premium
w.jansen1234 said:
i had some issues with siyah kernel and cyanogenmod 10.1,
Click to expand...
Click to collapse
That wouldn't be a problem here mate, because when flashing CM10, Siyah kernel is replaced by the stock CM kernel.
"To err is human, to forgive is divine"
Sent from my SGS II
asychni share
stopro said:
Mate 8.13 is not for cm10.1 its for stock/custom 4.1.2 , cm10.1 is 4.2.2 right kernel is 9.13.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
your'e very right, sorry about the misinformation.
I have just updated my samsung galaxy s2 i9100 phone to Indian firmware 4.1.2 JB XWLST (newest version) via odin by downloading from sam website..now i want to root my phone ..Anyone pls suggest me what will be best way to do that
Best way is to search first, then ask.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Best way is to search first, then ask.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I've rooted my phone with Jeboo kernel_v1.2 a....Also I've heard of siyah kernel..I dont know which kernel is best.. can you help..I've searched a lot but im confused
rider345 said:
I've rooted my phone with Jeboo kernel_v1.2 a....Also I've heard of siyah kernel..I dont know which kernel is best.. can you help..I've searched a lot but im confused
Click to expand...
Click to collapse
Thats better! Always mention some stuff you tried or read, so that we feel you have tried to search and failed.
You can flash Siyah or Philz kernel.
Or if u don't want a custom recovery, use this guide:
http://forum.xda-developers.com/showthread.php?p=37149820
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Thats better! Always mention some stuff you tried or read, so that we feel you have tried to search and failed.
You can flash Siyah or Philz kernel.
Or if u don't want a custom recovery, use this guide:
http://forum.xda-developers.com/showthread.php?p=37149820
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
According to you , which kernel will you recommend for my phone ? Siyah or Philz or Dorimanx or Jeboo or any other which i am not aware of ..Maybe you've tried many kernels and roms so you have basic idea about that stuff
rider345 said:
According to you , which kernel will you recommend for my phone ? Siyah or Philz or Dorimanx or Jeboo or any other which i am not aware of ..Maybe you've tried many kernels and roms so you have basic idea about that stuff
Click to expand...
Click to collapse
Sorry, but recommendations are not allowed on this forum. I suggest you try and see which u like.
To be honest, it doesn't matter which u choose, because once u flash a custom rom, the kernel will be replaced.
If ur really confused...
Philz - same as stock, but improved custom recovery
Siyah - custom kernel, more features, more tweaks
Dorimanx - based on siyah, heavily tweaked and tuned
Jeboo - haven't personally tried, but I think its a tweaked stock kernel
"To err is human, to forgive is divine"
Sent from my SGS II
rider345 said:
I have just updated my samsung galaxy s2 i9100 phone to Indian firmware 4.1.2 JB XWLST (newest version) via odin by downloading from sam website..now i want to root my phone ..Anyone pls suggest me what will be best way to do that
Click to expand...
Click to collapse
Flash Siyah Kernel !
Hello friends,
I rooted my samsung galaxy s2 i9100. booted the recovery in cwm v6.0.1.2. I have Kernel_Siyah-Dorimanx-V9.32 kernel install. Im stuck in Cameleon rom, Im trying for about 2 days to flash Jellybeer v4.32 and paranoid v3.69... All im getting is STATUS 7 error.
I tried editing the ASSERTS, and all methods in xda guides..
If Some great man helps me, i would be pleased..
Please Help, I Love to customize my I9100
Tried flashing stock firmware, then rooting and flashing custom ROM?
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Tried flashing stock firmware, then rooting and flashing custom ROM?
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
Yes i did for about 6-7times trying different methods, None worked...
Jaheen said:
Yes i did for about 6-7times trying different methods, None worked...
Click to expand...
Click to collapse
Maybe the downloaded rom is broken or something. Try downloading from another computer or an Internet Cafe. If possible, verify the checksum of the rom to see where it's broken or not.
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Maybe the downloaded rom is broken or something. Try downloading from another computer or an Internet Cafe. If possible, verify the checksum of the rom to see where it's broken or not.
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
I even tried AVATAR rom which is working on galaxy S but not in my S2, Its showing the same status error 7
Status 7 error arises usually when you are trying to flash a rom not meant for ur device. Are you sure you are downloading the rom meant for the I9100? Because some roms are available for multiple devices.
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Status 7 error arises usually when you are trying to flash a rom not meant for ur device. Are you sure you are downloading the rom meant for the I9100? Because some roms are available for multiple devices.
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
Yea, well im search rom in ANDROID DEVELOPMENT section only. Will check and post here...Please be touched on this thread to help me...:crying:
Thank You
Almost tried everything, still status error 7
Please post the links to the roms you have tried.
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Please post the links to the roms you have tried.
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
I cant post a reply there, because im below 10 posts...
Jaheen said:
I cant post a reply there, because im below 10 posts...
Click to expand...
Click to collapse
Maybe you can PM me?
"To err is human, to forgive is divine."
Sent from my SGS II
OP has 11 posts now. If possible, post the links here, I'm interested in the outcome, as may others who stumble across this thread in want of a solution.
Sent from a galaxy far, far away
I have come across that status 7 error when being on certain kernels ( not dori though) but came around it by flashing philz kernel then rebooting recovery and flashing rom. Have you tried with another kernel or another version of dori? Hope you get it sorted out GL.
Sent from my GT-I9100 using xda premium
pargas said:
I have come across that status 7 error when being on certain kernels ( not dori though) but came around it by flashing philz kernel then rebooting recovery and flashing rom. Have you tried with another kernel or another version of dori? Hope you get it sorted out GL.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I tried Kernel_Siyah-Dorimanx-V9.32 on flashing rom. For now im able to flash rom from ANDROID ORIGINAL DEVELOPMENT section. I noticed those scripts dont have ASSERTS.
But ROMs from ANDROID DEVELOPMENT has ASSERTS, even editing i can not flash...
Can you suggest a kernel which is suitable for problem.
What is your current rom.? Chameleon OS rom (4.2.2) or Chameleon 3.0.3 (4.1.2 hybrid). Are u sure your kernel is dori and not the stock from your rom. Sorry if I ask obvious but just checking. Maybe try flashing philz kernel and the rom. Read up first. I am sort of a noob so don't want to mess up your phone. Good luck.
Sent from my GT-I9100 using xda premium
pargas said:
What is your current rom.? Chameleon OS rom (4.2.2) or Chameleon 3.0.3 (4.1.2 hybrid). Are u sure your kernel is dori and not the stock from your rom. Sorry if I ask obvious but just checking. Maybe try flashing philz kernel and the rom. Read up first. I am sort of a noob so don't want to mess up your phone. Good luck.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thank you for the suggestion. For now im flashing the roms from ORIGINAL ANDROID DEVELOPMENT. Its working fine which has no ASSERTS script.:cyclops:
pargas said:
I have come across that status 7 error when being on certain kernels ( not dori though)
Click to expand...
Click to collapse
Good thinking! Come to think of it, I had this issue while flashing Resurrection Remix while being on Dorimanx kernel. Switched to Siyah kernel and the flash went well.. :good: