Field Test Mode - Nokia Lumia 920

So, with the new 1314.1 update (AT&T), field test mode is now gone. Again.
##3282 Does not work anymore and neither does ##3282#
Has anyone figured out what the new code is this time? Assuming it hasn't been completely removed...
I ask because I like to switch my connection speed from LTE to 4G when I'm not using the internet. Now that I updated, I'm stuck on 4G unless I do a factory reset, which I really don't wanna do...

A factory reset will not correct what the update did. The update was a full new OS and as such all settings are now considered default. All a factory reset will do is setup the device exactly as it is now.

Solarenemy68 said:
A factory reset will not correct what the update did. The update was a full new OS and as such all settings are now considered default. All a factory reset will do is setup the device exactly as it is now.
Click to expand...
Click to collapse
That's the thing though. The update did not set it to 4G. I did. Prior to the update I had it set to 4G. Since the update removed the old field test code, I have no way of switching it back to LTE. Since 1314 is an ATT update, the default would be LTE, so resetting it would fix the problem. Unfortunately it looks like my only option so far...

Nokia 920 Field Test Mode
Nissan350 said:
That's the thing though. The update did not set it to 4G. I did. Prior to the update I had it set to 4G. Since the update removed the old field test code, I have no way of switching it back to LTE. Since 1314 is an ATT update, the default would be LTE, so resetting it would fix the problem. Unfortunately it looks like my only option so far...
Click to expand...
Click to collapse
I was using the 'Field Test' to set our phones to 'E' while at home due to dropped calls when the phone would try switching networks. Now I have the same problem with both of our phones...they are stuck in 'E' with no way to get them back to 'Auto' or any other setting. I have contacted Nokia and At&t and neither of them were of any help.

terrykeeler said:
I was using the 'Field Test' to set our phones to 'E' while at home due to dropped calls when the phone would try switching networks. Now I have the same problem with both of our phones...they are stuck in 'E' with no way to get them back to 'Auto' or any other setting. I have contacted Nokia and At&t and neither of them were of any help.
Click to expand...
Click to collapse
I think hard reset will restore back original settings.

Related

[Q] Data Hanging?

So just as the title says, a few days ago my data just stopped working. it will show H+, but it won't have the bars underneath or anything. I literally try everything, and sometimes it works and then just disappears again.
I got so frustrated today with it that I flashed down to 1.5.7 then OTA'd to 1.8.3 and guess what..it's still doing it!
Another frustrating thing about it is that I can't receive pictures or anything. I'm very close to going back to my iphone 4. Has this been happening to anyone else?
i have this problem too and like you i tried everything with fail.
maybe it's your apn settings?
i've reset them twice, and it still doesn't do anything. i'm ready to just exchange it out
this happened when i ****ed up my APN settings.
go to you APN list and then make sure that AT&T US is selected. Wait till it connects to the AT&T cell tower and then restart your phone.
Thats what worked for me.
This is happening to me too, I don't know what else to do I've done almost everything I can, I even restored to factory settings only to find out it would wipe all of my APN settings (I thought it would set them to default, but it just erased everything)
I've now set the APN settings but it still doesn't connect to my data plan. I'm really running out of options, I'm really frustrated.
i have att us hsdpa selected. i'll try just doing att us
What is your baseband? .07P? Or .15P?
badnokia said:
What is your baseband? .07P? Or .15P?
Click to expand...
Click to collapse
I've had this issue...baseband .15P
I'm on the fido network in Canada, it doesn't matter which APN I use
.15. i'm going back to att soon to just exchange it out and hope that fixes it
edit - yep gave me a new phone/sim, still can't access the market from data or receive/send pictures. I'm stumped
well I ended up switching back to my iphone 4, still have my atrix just isn't active.
turns out that I was missing a feature that would have given me full data access vs limited.
Rev1vaL said:
So just as the title says, a few days ago my data just stopped working. it will show H+, but it won't have the bars underneath or anything. I literally try everything, and sometimes it works and then just disappears again.
I got so frustrated today with it that I flashed down to 1.5.7 then OTA'd to 1.8.3 and guess what..it's still doing it!
Another frustrating thing about it is that I can't receive pictures or anything. I'm very close to going back to my iphone 4. Has this been happening to anyone else?
Click to expand...
Click to collapse
happens to me all the time, i use a widgetsoid button to renable it back everytime it goes out.

Issue with 3G

I was prompted to update my S2 to 4.1.2 yesterday, and I did.
All seemed to be working fine until today, out an about, when there was no 3G connection at all. My limit is well below my cap etc... I just cannot get a 3G connection at all. I checked that data is on, all the menu's seem correct (i.e. Mobile Data on, Network mode auto).
I have gone in to the Network operators menu and tried both Auto and EE, but neither give me a 3G connection.
My contract is with Orange, but have had the EE network on my phone for a while now (changed automatically a while back). I'm not sure if that could be an issue.
Also, shortly after the update, a menu popped up just as I was touching something else. I accidentally just clicked an option and it went away. I can't be sure, but I believe that I selected the other option from "Orange", it might have just been some combination of letters which I didn't recognise, but I think the option that I didn't click was "Orange". Is this the mistake? How do I get to that menu?
Thanks.
Gawge said:
I was prompted to update my S2 to 4.1.2 yesterday, and I did.
All seemed to be working fine until today, out an about, when there was no 3G connection at all. My limit is well below my cap etc... I just cannot get a 3G connection at all. I checked that data is on, all the menu's seem correct (i.e. Mobile Data on, Network mode auto).
I have gone in to the Network operators menu and tried both Auto and EE, but neither give me a 3G connection.
My contract is with Orange, but have had the EE network on my phone for a while now (changed automatically a while back). I'm not sure if that could be an issue.
Also, shortly after the update, a menu popped up just as I was touching something else. I accidentally just clicked an option and it went away. I can't be sure, but I believe that I selected the other option from "Orange", it might have just been some combination of letters which I didn't recognise, but I think the option that I didn't click was "Orange". Is this the mistake? How do I get to that menu?
Thanks.
Click to expand...
Click to collapse
Do you have signal?Can you make a call
.
GamingDj said:
Do you have signal?Can you make a call
.
Click to expand...
Click to collapse
Yes. I have sent numerous texts, and received a call.
Gawge said:
Yes. I have sent numerous texts, and received a call.
Click to expand...
Click to collapse
Maybe the update changed the modem.Try going back to ICS (not 4.0.4!) 4.0.3.If this works,then I recommend to go with ICS.If it still does't work,then try flashing different modems.
GamingDj said:
Maybe the update changed the modem.Try going back to ICS (not 4.0.4!) 4.0.3.If this works,then I recommend to go with ICS.If it still does't work,then try flashing different modems.
Click to expand...
Click to collapse
I haven't rooted my phone. It just updated normally via a prompt.
Problem Solved
I rang Orange customer support, and my issue was quickly solved. I'll share the solution, incase anybody else has the issue.
Basically, the issue was that menu which I accidentally clicked after the update. I clicked "LIFE" rather than "Orange UK". So, you just need to go to your mobile network menu, find "Access Point Names" and then hit the menu button and reset them, and choose Orange.

[Q] No CDMA, Can't make or receive calls

Yesterday I noticed that my phone is no longer able to send or receive phone calls.
It's got a good 4G signal and data works, but the "CDMA (3g) Signal Info" in the Advanced Signal Status application is 0%.
I don't know if that zero CDMA signal is normal if you're on 4G, so maybe this is a red herring.
I'm considering trying to ODIN the MK2 Modem onto it. Any other ideas?
You're probably on LTE only mode use an app like phone info to change the radio bands back to lte/CDMA (prl) auto mode.
Sent from my iPad using Tapatalk HD
Flashing the MK2 modem leaves me at state "No Service". This is not an improvement.
It's now asking me to switch to Global mode.
I tried using "Phone Info",
Network Type is 13 (LTE).
Phone Type is 2 (CDMA).
SIM State is 5 (Ready),
OK, any other ideas?
Damn wish I could help this is a weird one. Do you think you did anything before hand that might have affected it?
Just to be clear, when you go to mobile networks settings your network mode is set to CDMA/LTE?
joshm.1219 said:
Damn wish I could help this is a weird one. Do you think you did anything before hand that might have affected it?
Just to be clear, when you go to mobile networks settings your network mode is set to CDMA/LTE?
Click to expand...
Click to collapse
Yup, it's a strange one.
Network mode is LTE/CDMA.
More data - I just plugged in my UK SIM. It came up, asked me to switch to Global mode, and now shows coverage as AT&T UK, which is what it has done in the past. GSM is apparently working OK. Network is AT&T HSPA, Roaming mode.
Power off, re-insert the Verizon SIM. Service says "Emergency Calls Only" due to Global mode.
Switching to LTE/CDMA gives me an "Attention" box saying "Searching for LTE/CDMA" with OK and Cancel buttons.
Pressed "OK" and now, instead of "No Service" it says "Verizon Wireless".However, still no phone calls in or out.
I just decided to use Safestrap to install Hyperdrive, figuring that if it was something corrupt in the base ROM it'd be obvious.
Unfortunately, no luck - it has the same "No Service" problem, and still can't make or receive calls.
I think I've got broken hardware.
For the record: Factory data reset brought it back to life.
I haven't any idea what did this, but I don't care since it's now working and I don't need to stand in line at the vzw store.
k1mu said:
For the record: Factory data reset brought it back to life.
I haven't any idea what did this, but I don't care since it's now working and I don't need to stand in line at the vzw store.
Click to expand...
Click to collapse
If I'd have seen this a few hours ago, could have saved you some aggravation. I've seen on here before where a factory reset was the only thing that seemed to fix this weird issue. Glad you got it fixed. If I remember correctly that user was messing with their apn settings.
Sent from my SCH-I545 using XDA Premium 4 mobile app
I don't mean to hijack the thread, but I had a similar (but not the same) situation yesterday, and hope that I can contribute help to anyone in the future using the search function.
I had fully-functional 4G and 3G but could not make/receive calls. I could even text. The phone showed 3 bars of signal, but when I called a number, it went to the circle with the line through it. The message said something like, "Out of network range". (I was right in the heart of my home city).
I rebooted and it said, "invalid PUK"
Anyway, I ended up taking the SIM card out and reinserting it, and the problem was fixed.
I am using the rooted/deodexed international debloated stock 4.3 rom. I wonder if my next step would be to unlock the SIM.
Anyway, I hope this helps someone....and glad to hear that you got your problem fixed!
Steve
probs
k1mu said:
For the record: Factory data reset brought it back to life.
I haven't any idea what did this, but I don't care since it's now working and I don't need to stand in line at the vzw store.
Click to expand...
Click to collapse
Which restore did you use? sory to bump old thread but I still had this issue after restore- on MK2
mghwater said:
Which restore did you use? sory to bump old thread but I still had this issue after restore- on MK2
Click to expand...
Click to collapse
Did you use Odin?
http://forum.xda-developers.com/showthread.php?t=2578209
That should definitely work.
mghwater said:
Which restore did you use? sory to bump old thread but I still had this issue after restore- on MK2
Click to expand...
Click to collapse
I booted into stock recovery and used that to perform a factory reset.
Forgot about the reset after Odin, thanks-
Unfricken believable this worked, Thank you! I suddenly had the same problem with my S4 from Verizon on MK2 I tried to make calls but I could not get a Dial Tone and it would drop the call all at the same time go to no service mode. It was actually rooted but on stock rom, worked fine for 3 months and all of a sudden I kept dropping signals, rebooting, etc didn't help. I even used Safestrap 3.71 to do a recovery of stock rom to day one stock rom. (When I first got the phone and rooted) AND I did a factory state reset in Safestrap and that did not even fix the problem. I was going to try Odin reset, but I tried the Factory reset using the phone's options by going into "Settings"-->"Accounts"-->"Backup and Reset" and I unchecked data backup and automatic restore as I already had backed up my contacts, etc. using Samsung Kies 3. I just clicked "Factory data reset" and confirmed the options when prompted and after reboot, BAM! everything is working like day one!
My only culprit maybe is that this may have occurred when I tried to do a unlock via Service Mode menu and it screwed up with the Global settings or so and from there it kept asking me if I wanted to switch to global mode. Which it still worked fine for 2 weeks after the service menu mode. What I thought my phone was unlocked, I'm still not sure if the service menu mode method unlocked my phone or not but Factory reset via phone's options works wonders! I was just about to head over to Verizon to help fix my issue.

Question Mobile data not working in Canada (Rogers)

I tried to changed APN manually to rogers but still data does not work, only call and text works. Is there a solution to this? I believe i got Pro 2 (cn with global rom installed)
I had the same issue, below is the APN setting on Rogers website, I've found that if you make the following changes, it will connect to 4G data (until you restart your device)​APN Type: replace "internet + mms" with "*"
MVNO: ROGERS
MVNO type: SPN
This will get you connected.
However, I ran into another problem after configuring the network this way. After restarting the device, the phone can no longer detect the SIM card, and has an error message prompting restart).
This is my problem after restarting:
Comparing with other phones, the auto detected APN Type is typically "default", but entering default will cause the connection issue right away. The "*" will allow you to run until device reboot.
I too would like help on how to resolve this. Seems more software than hardware problem since it only fails after boot.
Mobile APN Settings​
Parameter NameParameter ValueAPNltemobile.apnMMSC
http://mms.gprs.rogers.com
MMS Proxymmsproxy.rogers.comMMS Port80APN Typeinternet + mmsAPN ProtocolIPv4/IPv6APN Roaming ProtocolIPv4/IPv6All other settingsBlank/default value
@GSKC
I just tried your method looks like it works and as you said it doesn't work after reboot. However when I did "Network setting reset," I was able to connect to 4g again (but resets wifi passwords too). Hopefully there's a solution...
I noticed that this problem only happens if there is a SAVED wifi network WHEN the device BOOT up.
I did a factory reset, then enter the APN manually. I was able to connect to stable network.
I did a system restart, no issue. The phone reconnects to the network automatically after booting.
I connect to a wifi network. The phone still works fine.
I restart the device again, the problem comes back.
If I take out the SIM and only use the Wifi, the phone is also okay.
The only time when it doesn't work is when I have both, which is the normal use case.
Something is happening in the firmware between the wifi and the SIM during the boot sequence.
This problem exists on my Lenovo L70081, Legion Phone Duel 2 Pro, running OS 12.5.188 ST, updated using Rescue and Smart Assistant v5.8.0.25
Any help would be appreciated.
GKSC said:
I noticed that this problem only happens if there is a SAVED wifi network WHEN the device BOOT up.
I did a factory reset, then enter the APN manually. I was able to connect to stable network.
I did a system restart, no issue. The phone reconnects to the network automatically after booting.
I connect to a wifi network. The phone still works fine.
I restart the device again, the problem comes back.
If I take out the SIM and only use the Wifi, the phone is also okay.
The only time when it doesn't work is when I have both, which is the normal use case.
Something is happening in the firmware between the wifi and the SIM during the boot sequence.
This problem exists on my Lenovo L70081, Legion Phone Duel 2 Pro, running OS 12.5.188 ST, updated using Rescue and Smart Assistant v5.8.0.25
Any help would be appreciated.
Click to expand...
Click to collapse
Im on the same OS version 12.5.188ST, my phone connected to data absolutely fine with no problems but after every few hours stop making or receiving calls. I did the following and its fine for some time now but I'm not sure whether this will work with every phone but no harm in trying :
settings.....cellular network and sim.....5G mode. By default (at least in my phone) it is on NSA, I first switched to NSA+SA but to no avail, than I switched to SA and vola problem solved, all incoming outgoing calls working bang on but I think now my phone doesn't go on 5g which is still not good but at least making calls as normal. Now, as I said, this procedure might not work for everyone but try it, cheers.
vtec303 said:
Im on the same OS version 12.5.188ST, my phone connected to data absolutely fine with no problems but after every few hours stop making or receiving calls. I did the following and its fine for some time now but I'm not sure whether this will work with every phone but no harm in trying :
settings.....cellular network and sim.....5G mode. By default (at least in my phone) it is on NSA, I first switched to NSA+SA but to no avail, than I switched to SA and vola problem solved, all incoming outgoing calls working bang on but I think now my phone doesn't go on 5g which is still not good but at least making calls as normal. Now, as I said, this procedure might not work for everyone but try it, cheers.
Click to expand...
Click to collapse
Thanks for the suggestion, unfortunately setting the 5G setting didn’t help. I also tried disabling 5G but I still have the issue.
Was your OS able to read the APN from your SIM or did you have to enter the APN manually also?
GKSC said:
Thanks for the suggestion, unfortunately setting the 5G setting didn’t help. I also tried disabling 5G but I still have the issue.
Was your OS able to read the APN from your SIM or did you have to enter the APN manually also?
Click to expand...
Click to collapse
I didn't mess about with apn, as I said in my earlier post I had no problems using data its always connected but I had problems with making and receiving calls, cheers
There's currently two ROM available on Rescue and Smart Assistant:
L70081_ROW_SECURE_USER_Q00017.0_R_ROW_12.5.188_ST_210819_qpst
L70081_EE_SECURE_USER_Q00017.0_R_ROW_12.5.137_ST_210710_sec_qpst
What's the difference between ROW and EE rom?
Which would work best in Canada and US?
is ROW only updated in Asia and Pacific?
i sort of had this same problem with Tmobile. it would only connect to 3g . if i connected to the 4g or 5g network i lost everything . i was able to fix it using my ROOTED phone and an app in the playstore called network guru. I used that to turn off majority of the network bands and only left the ones listed for the phone. My service was immediately fixed and havent had any trouble since
tinman4209333 said:
i sort of had this same problem with Tmobile. it would only connect to 3g . if i connected to the 4g or 5g network i lost everything . i was able to fix it using my ROOTED phone and an app in the playstore called network guru. I used that to turn off majority of the network bands and only left the ones listed for the phone. My service was immediately fixed and havent had any trouble since
Click to expand...
Click to collapse
Can you go into more detail and steps? I actually switched from tmobile to att after I couldn't get it work. I would rather be on tmobile.
superrama said:
Can you go into more detail and steps? I actually switched from tmobile to att after I couldn't get it work. I would rather be on tmobile.
Click to expand...
Click to collapse
I know how ya feel, I pestered TMobile for 2 weeks and they were no help. They kept trying to push me off to Lenovo who was absolutely no help at all. Id go thru their website which connects you to Motorola. Then they would tell me they don't support the phone because it's Lenovo and give me a link to follow. Id follow that link which led me right back to Motorola lmfao.
After 4-5 times of going thru that nonsense I finally got someone who knew what they were doing. They told me because this phone was never released in the US I need to go thru their European server for assistance. Screw that, I did some more research and got the idea of trying this from some ancient post I found on xda lol.
It's actually very easy as long as your phone is rooted. download the app, click the 3 dots and go into force control. Then adjust the carrier bands so only the ones supported by the phone are selected. Then reboot your phone and it should kick over to a working signal . If not ya might have to monkey around in the service menu using the dial code *#*#4636#*#*
Here's a few screenshots to give ya an idea and a link to a website with all the bands listed. https://www.kimovil.com/en/frequency-checker/US/lenovo-legion-2-pro
tinman4209333 said:
I know how ya feel, I pestered TMobile for 2 weeks and they were no help. They kept trying to push me off to Lenovo who was absolutely no help at all. Id go thru their website which connects you to Motorola. Then they would tell me they don't support the phone because it's Lenovo and give me a link to follow. Id follow that link which led me right back to Motorola lmfao.
After 4-5 times of going thru that nonsense I finally got someone who knew what they were doing. They told me because this phone was never released in the US I need to go thru their European server for assistance. Screw that, I did some more research and got the idea of trying this from some ancient post I found on xda lol.
It's actually very easy as long as your phone is rooted. download the app, click the 3 dots and go into force control. Then adjust the carrier bands so only the ones supported by the phone are selected. Then reboot your phone and it should kick over to a working signal . If not ya might have to monkey around in the service menu using the dial code *#*#4636#*#*
Here's a few screenshots to give ya an idea and a link to a website with all the bands listed. https://www.kimovil.com/en/frequency-checker/US/lenovo-legion-2-pro
Click to expand...
Click to collapse
How do you root the phone?
GKSC said:
How do you root the phone?
Click to expand...
Click to collapse
Tutorial: How to Update, Unlock bootloader and Root your CN with Global Rom phone
I received my phone today from Aliexpress and was able to update, unlock bootloader and root my phone so I want to share the steps. Follow them at your own risk, I take no responsibility for any issues or bricking. You should always backup your...
forum.xda-developers.com

Question Cell Signal Poor After System Upgrade

When I first got my phone a cpl years ago, I had really good cell service. There were "dead" zones that other phones had issues with, but I was able to keep talking while going through those zones. I could also use data in those areas.
I don't remember exactly when, but when Cricket/ATT sent an OS update several months back, I no longer get that good of service. The dead zone is actually now much larger than it had been. I also can no longer use my phone inside the house, or even send/receive txt messages without having to set the phone near the outside wall, or step outside.
Is there any way possible to downgrade? Or maybe root and change some setting somewhere? I've already tried doing a factory reset, and that did nothing. Reset APN's to defaults, nada. Even did a Wifi/BT/Network reset to defaults, no go.
Moto G Power (2021) XT2117-1
Android 11
Kernel 4.19.157-perf+
Build number RZBS31.Q2-143-27-9
Baseband version HA10_29.11.02.95.01R BORNEO_NA_CUST
KorishanTalshin said:
When I first got my phone a cpl years ago, I had really good cell service. There were "dead" zones that other phones had issues with, but I was able to keep talking while going through those zones. I could also use data in those areas.
I don't remember exactly when, but when Cricket/ATT sent an OS update several months back, I no longer get that good of service. The dead zone is actually now much larger than it had been. I also can no longer use my phone inside the house, or even send/receive txt messages without having to set the phone near the outside wall, or step outside.
Is there any way possible to downgrade? Or maybe root and change some setting somewhere? I've already tried doing a factory reset, and that did nothing. Reset APN's to defaults, nada. Even did a Wifi/BT/Network reset to defaults, no go.
Moto G Power (2021) XT2117-1
Android 11
Kernel 4.19.157-perf+
Build number RZBS31.Q2-143-27-9
Baseband version HA10_29.11.02.95.01R BORNEO_NA_CUST
Click to expand...
Click to collapse
Before trying other solutions (e.g., downgrading to Android 10), you may want to consider contacting your service provider to see if there is an updated sim card available for Android 11. If your phone is similar to mine, there is no longer the + sign to add new apn's in your network settings. The apn is hard coded on the sim card with no option now to change it in network settings, which would have perhaps been the simplest solution. The other option is to see if there is an update for the apn that your service provider can push through for installation.
sdembiske said:
Before trying other solutions (e.g., downgrading to Android 10), you may want to consider contacting your service provider to see if there is an updated sim card available for Android 11. If your phone is similar to mine, there is no longer the + sign to add new apn's in your network settings. The apn is hard coded on the sim card with no option now to change it in network settings, which would have perhaps been the simplest solution. The other option is to see if there is an update for the apn that your service provider can push through for installation.
Click to expand...
Click to collapse
Ahhh, ok. Good point! Thanks. I'll contact Cricket and see if they may have one. I hadn't even thought of possibly needing an upgraded SIM card.
And yes, you are correct, the APN is all greyed out and the + is missing. I can't even access it from 3rd party options.
KorishanTalshin said:
Ahhh, ok. Good point! Thanks. I'll contact Cricket and see if they may have one. I hadn't even thought of possibly needing an upgraded SIM card.
And yes, you are correct, the APN is all greyed out and the + is missing. I can't even access it from 3rd party options.
Click to expand...
Click to collapse
While I appreciate your 'Thanks', please learn to use the 'Like' button when logged in (previously known as the 'Thanks' button). It's a longstanding XDA courtesy when members try to help or provide roms/guides etc,. for members use.

Categories

Resources