Related
Trying to update my mom's Fascinate which is currently running DI01. I have tried via wifi and 3g and also did the *228 thing but it still tells me the update server is unavailable.
I don't have any experience with dealing with the Galaxy-x devices (only used a nexus one and Dell Streak) Is there an easy way to upgrade to DI09 and then froyo? Can I put the update file on the sd card and flash through a stock recovery? Or any other things I should try? Thanks
Can anyone help with getting the froyo update?
i have the same issue, so i just flashed it through odin. Look for it in the development section from adrynaline, how to quickly update to Froyo. Lazy to look for the link. but hope that helps
Search my man, I had the same issue and it was resolved in my thread.
phonefiend said:
Search my man, I had the same issue and it was resolved in my thread.
Click to expand...
Click to collapse
your thread? and which one would that be? [Q] Technical explanation of recovery, rom manager, odin, etc. or Battery bar mod cause thats the only two threads you have created? or are you referring to something else.
If you are referring to the other posts about putting the update.zip file from the ED01 update on the sd card and updating through recovery I am gonna give that a try as it doesn't appear anyone has a fix to make it work OTA (which would be a lot easier seeing as how its my mom's phone and not in my possession to do the manual upgrade right now)
http://androidforums.com/fascinate-...-fixed-how-get-froyo-if-your-ota-failing.html
Phone updated 20 MB over wifi then shut off to reboot with a white screen saying "update failed." I have a mid December entropy kernel and entropy stock rom/root. Do I even want this update? Phone being rooted is a must for me. I also have a jig just in case..... but my PC is down, so no ADB for me
Sent from my SAMSUNG-SGH-I777 using XDA App
read around. that update is the UCKK6 update. plenty of complaints about the stock version of it eating up battery like (mostly the when wifi is on and the phone is idle). It happened to mine.
I just decided to go with Unnamed. it's pretty much stock kk6 without the battery drain (and bloat of course).
you dont want that update.
Why are you trying to install an ATT update on your phone if you have a custom rom on it? I think you need to re-read the op of the rom that you're using.
I had to unroot to get the 2.3.6 update that this is. Basically fixed the pin screen issue but nothing too major. Going to re-root here in a couple minutes.
I suspect the update failed because you have the custom kernel. If you want the update, flash back to stock UCKH7 plus root first, then update. You will retain root. Then you can put Entropy's kernel back on. However, as others have said, UCKK6 stock doesn't play well on some phones, so it's a crap shoot whether it will be good for you.
The other option if you want to stay stock, is to stay on UCKH7 with Entropy's kernel, and delete or freeze device manager so you won't get any more updates.
Edit: Also, Entropy has a UCKK6 plus root you can flash directly. You can download that from his unbrick/return to stock thread.
Yupp, it's because you're running another kernel/ROM other than stock.
The update failed for many of us who were rooted. It's really no big deal. I mean, I'm not one to tell you what YOU need/don't need, but the update wasn't a big one at all, so I highly doubt you'd need it.
BrokenLegGuy said:
Why are you trying to install an ATT update on your phone if you have a custom rom on it? I think you need to re-read the op of the rom that you're using.
Click to expand...
Click to collapse
It was an automatic pop up. It said install failed anyway and it hasn't bothered me again.
Sent from my SAMSUNG-SGH-I777 using XDA App
How come I get error (2) when uploading a picture from my gallery to tapatalk?
snotball007 said:
I had to unroot to get the 2.3.6 update that this is. Basically fixed the pin screen issue but nothing too major. Going to re-root here in a couple minutes.
Click to expand...
Click to collapse
Good luck with that. Be sure to read up on that subject because you are due to be disappointed. And don't start a new thread on the problem before reading and searching. Everything in this post could have been discovered with just a little bit of reading.
OP question answered, search results would have yielded multiple pages of multiple threads all saying the same thing... now we get to add this thread to the search results of "KK6, AT&T update, horrible battery..."
Thread closed.
I'm not sure if I'm the only one who is having this problem but I've searched around and can't fix the issue. I recently had CM9 but went back to complete stock, on 2.3.4 (which isn't up to date). When I go to update from the settings menu, I get a communication failed text box, which then in turn makes me wait 24 hours before checking again.
I've done multiple battery pulls and stopped the running process for the software update to no avail. Can anyone help me with this?
Remember, I'm on the stock AT&T rom.
Sent from my SAMSUNG-SGH-I777 using XDA
myownwitness said:
I'm not sure if I'm the only one who is having this problem but I've searched around and can't fix the issue. I recently had CM9 but went back to complete stock, on 2.3.4 (which isn't up to date). When I go to update from the settings menu, I get a communication failed text box, which then in turn makes me wait 24 hours before checking again.
I've done multiple battery pulls and stopped the running process for the software update to no avail. Can anyone help me with this?
Remember, I'm on the stock AT&T rom.
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
Are you rooted? And why update to 2.3.6 uckk6? Its got a few really bad bugs.
Sent from my SGH-I777 using XDA App
Not rooted. I just want to get my phone up to date so when the ICS update rolls out I'll be able to get it.
Sent from my SAMSUNG-SGH-I777 using XDA
myownwitness said:
Not rooted. I just want to get my phone up to date so when the ICS update rolls out I'll be able to get it.
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
If*
Sent from my SGH-I777 using XDA App
Thank you for your helpful information.
Sent from my SAMSUNG-SGH-I777 using XDA
I think others were having trouble updating as well... I'd suggest flashing a custom rom, or if you want to stay with stock, using Entropy's Back to Stock packages (I'm not going to link that for you cause I'm too lazy and you should be able to find it.)
jcracken said:
I think others were having trouble updating as well... I'd suggest flashing a custom rom, or if you want to stay with stock, using Entropy's Back to Stock packages (I'm not going to link that for you cause I'm too lazy and you should be able to find it.)
Click to expand...
Click to collapse
Might give it a try. Trouble is, not having a rooted phone and going back to stock means I lose all applications and data with them. Eh. Thanks
Download stock rom (if u can get a tar file it most likely has everything u need, do some Googling just make sure its for the i777). Get mobile odin pro. Use mobile odin pro to flash the .tar and it gives u the option to root right there within the app before u flash. Profit. Just giving my two cents and what worked for me . If u do this though and don't remove any system apps it should allow u to ota upgrade. Haven't tried myself but that sounds like it'd work fine.
Sent from my GT-I9100 using Tapatalk
Phalanx7621 said:
Download stock rom (if u can get a tar file it most likely has everything u need, do some Googling just make sure its for the i777). Get mobile odin pro. Use mobile odin pro to flash the .tar and it gives u the option to root right there within the app before u flash. Profit. Just giving my two cents and what worked for me . If u do this though and don't remove any system apps it should allow u to ota upgrade. Haven't tried myself but that sounds like it'd work fine.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I already did this except for rooting about 3 weeks ago. From what you're saying, if I root my phone from its current state I should be able to receive OTA updates? I'm willing to root just to see but I don't see how that would fix the "communication failed" errors for updates.
Sent from my SAMSUNG-SGH-I777 using XDA
FYI I have a rooted stock ROM, and I'm having difficulty doing an OTA update also. Different error (mine is "interrupted" after reboot). I posted it here because it seemed more related to that thread and I had other Q's about the process.
You guys are in panic mode, wait till we actually get an ANNOUNCEMENT for ICS from AT&T, then try to go back to stock using the methods we have.
No reason to do so right now, since AT&T will probably take a long time before pushing it.
We have a possible sources dropping on March 15th from i9100 but you will be required to be rooted to flash the possible ICS Roms that will be available after that date.
LiLChris06 said:
You guys are in panic mode, wait till we actually get an ANNOUNCEMENT for ICS from AT&T, then try to go back to stock using the methods we have.
No reason to do so right now, since AT&T will probably take a long time before pushing it.
We have a possible sources dropping on March 15th from i9100 but you will be required to be rooted to flash the possible ICS Roms that will be available after that date.
Click to expand...
Click to collapse
I don't think you understand. First of all, in no way am I in panic mode. Secondly, my phone is a few updates behind since I just recently brought it back to stock from CM7. All I am trying to do is bring it up to date.
Sent from my SAMSUNG-SGH-I777 using XDA
ota issue
You might want to check the (Guide)How to flash custom binaries.....on this forum. Creepycrawly has posted a reply towards the end of the thread that might be helpful. Believe its on one of the last two pages.
As has been said many times in other threads, even on a stock ROM if you have rooted and removed even one item of bloatware or made any other mods you will not be able to download an OTA update.
I have not rooted my phone. And as I said earlier, I restored my phone to complete stock meaning no bloatware has been removed. I'm still at a loss for what to do
Sent from my SAMSUNG-SGH-I777 using XDA
You were on CM9 (in a later post you say CM7), but you went back to stock UCKH7. Now you are unable to update over the air to UCKK6. You are mainly interested in having the phone ready to receive the update over the air to ICS, whenever that occurs. You have not rooted the phone since you returned to stock but you are willing to try root if it will help the update happen. You were also concerned about loosing apps and their data since you are not rooted. I recapped all this because on stock you should be able to run the update. To help you solve the problem, need to know all the facts.
I've done the following, although it has been several months ago, about a week or two after UCKK6 first released. From running a custom rom, I did a wipe data/factory reset, flashed stock UCKH7 plus root, and ran the over the air update to UCKK6 successfully, retaining root on UCKK6. I just did this to test it out, so after completing the test, I used my nandroid backup to return to the custom rom I was on.
I would assume that you did a wipe data/factory reset either before or after you flashed back to stock? If not, there could be traces left over that could interfere with the update process. I'm not sure if there could be traces left even after a wipe data/factory reset, but the Cyanogen Mod file structure is so very different than stock that it wouldn't be inconceivable.
Next, I would wonder how soon after flashing back to stock you tried to run the update, and if not immediately, what action could have possibly placed or removed files that would intefere with the process.
I'm pretty certain that if you were to wipe data/factory reset with a format and then flash stock again, and then try to run the update immediately, it would succeed. So there has to be something in the file system preventing it. You may not find it easy to correct that something manually. You may just have to do a wipe data/factory reset, and maybe a format, and then start all over with a fresh install.
Of course, that is the reason for rooting first. Root, then back up everything with titanium backup, SMS backup, export contacts, etc. and save all that to your computer. Then you can restore stuff after.
Thanks creepy,
I'm in the process of doing what you said. I rooted my phone, backed up everything I thought needs to be backed up and flashed the stock rom (2.3.4 kernel version 2.6.35.7 baseband version I777UCKH7). I still need to do a factory format in order to see if that will fix the update problem.
Question. Is the firmware version(s) above the latest AT&T software? According to Kies, it is. But I am reading other places that the latest software is android 2.3.6.
Did exactly as creepy stated. Brought the phone back to stock software and did a factory reset. Without ANY customization and as soon as the phone booted up, I did the software update and had the same thing, "Communication failed" (says there is an update available but servers are busy).
I give up.
Well, I don't have any new ideas. Maybe if I get some time in the next few days I'll try it on my phone to see what happens. It has been a while since I tried it. Maybe the server behaves differently now?
creepyncrawly said:
Well, I don't have any new ideas. Maybe if I get some time in the next few days I'll try it on my phone to see what happens. It has been a while since I tried it. Maybe the server behaves differently now?
Click to expand...
Click to collapse
From what I've been reading on AT&T forums (http://forums.att.com/t5/Samsung/Sa...2-3-6-OTA-update-now-live/td-p/2996495/page/3) I don't think so. I've been trying every combination I can think of to make this thing work but I honestly have no idea. I was extremely surprised when I brought the phone back to complete stock and no root and still couldn't get the update.
If ICS ever comes to AT&T GS2, I'll wait a month or so to keep trying then I might resort to going to an AT&T store to get a replacement. Who knows
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
This is a Backup of the PH1 ROM's system and modem partitions. This is a Pre-Rooted ROM with the SD Card write permissions fix. This is different from my other post in those two differences.
You will need a custom recovery to install this ROM. (http://forum.xda-developers.com/note...lipop-t3089382)
Always perform the appropriate backups and other steps just in case something messes up. If you are on Lollipop, you should be able to just flash and go without any data loss (except custom system apps), but no promises.
Extract the folder (ES File Explorer or 7 Zipper) to "extsdcard/TWRP/backups/[serial number]" then boot into recovery and restore the image. The easiest way to get this folder is to simply perform a backup first, then unzip this folder next to the one for the backup you just created.
I didn't factory reset prior to this backup because it's just system partitions, so let me know if there's anything weird.
https://drive.google.com/open?id=0B2iEgzRTFjrQa2JEbE1DSE9qNHM
Here's the Odin ROM:
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178/page1
Here's my non-rooted TWRP ROM:
http://forum.xda-developers.com/not...stom-recovery-rom-stock-rooted-t3449321/page1
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
evilvoice said:
Still 5.0 this is probably just a security update
RDF
http://device.sprintpcs.com/Samsung/SM-N900P-SPRINT/PH1.rdf
Click to expand...
Click to collapse
Yep, just a security update most likely. Looks like some of the stock (Sprint) apps may have been updated as well . The update file was only about 190 megabytes if I remember correctly.
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
MeAtKeRtN said:
Quick question on updating modem & firmware.. I'm stock rooted ok2, and i dont have this update yet. I am working toward flashing the newly released and highly anticipated DL Modded N5N7 v4 which requires the PH1 updated firmware.
Do I need to ODIN flash the update files from the other PHI ROM thread or can I just do a full wipe and flash this backup with TWRP?
Thanks in advance.
Sent from my SM-N900P using XDA Labs
Click to expand...
Click to collapse
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
jhunt75 said:
You can just flash the rom you want and keep your current bootloader/modem. But it's always suggested to keep current with any bootloader/modem, that the OP mentioned. That way if there is a issue with the install, it wouldn't be that.
Sent from my Nexus s using XDA-Developers mobile app
Click to expand...
Click to collapse
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Lyvewire said:
Hey, I've seen you in a few threads and figured I ask before I made the same mistake. I'm looking to upgrade to DL Modded N5N7 v4 like yourself. I have a exploding Note 7 still and I'm anticipating being blacklisted at some point. As crazy as it sounds I like my Note 3's snappiness and everything else over the 7. My issue is my Note 7 radio gets 4g in my job and my Note 3 radio is 3g or spotty. I'm sure my modem and baseband is outdated and may help being updated
I'm on a older Moars Rom Baseband Nk4 android version 4.4.2. Did you figure out where things went bad. I was thinking of following these instructions http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178 don't want to mess this up.
What did you use and what should you have used?
Thanks
Click to expand...
Click to collapse
My mistake was following bad advice and flashing the TWRP Backup of PH1 in the OP of this thread instead of ODIN flashing the full ROM-ODIN-PH1- Update- t3463178.
I was able to get TWRP to restore my backup to OK2. From there I did a full wipe 3x and ODIN flashed the full PH1 update, immediately rooted with CFautoroot and reinstalled TWRP 2.8.7.0.
From there I followed the OP instructions in the DL Modded N5N7 thread which require the ROM, Kernel Cleaner, MVNO Buzbee2, Sprint VVM, and I installed the DL MM UIX Kernel.
The ROM and kernel are both really well put together except my mobile network connection to Sprint has been intermittent... the phone was stuck roaming and was connecting in spurts with Verizon, sprint, or the network was unavailable.
I just dirty flashed the Rom, Kernel, and MVNO fix an hour or so ago and the APNs seem to be sticking now. We'll see.
I have three Note 3's and each has its own quirky 'personality'- not especially playing nicely with most of the Port ROMs available these days. Hope this answers your questions and helps someone else trying to keep their Note 3 thriving.
MeAtKeRtN said:
The preferable answer would have been 'NO' or 'I'M NOT SURE' as a direct answer to my very specific question... as I now have a phone that doesn't make phone calls.
Click to expand...
Click to collapse
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Sent from my SM-N920C using XDA-Developers mobile app
jhunt75 said:
I am not trying to start any trouble, but from reading your comment it seems you are suggesting I gave you bad or wrong advice. So I want to explain myself just in case it was a misunderstanding. All roms are capable of being flashed with older bootloaders and modems. But the proper thing to do, is to always be up to date with all bootloader/modem files. This way you will not run into any problems. Now I didn't mention anything about flashing the OP'S twrp backup method. I figured you may have been experienced enough to flash these BL/modem files from a source like sammobile. Then proceed to flash your rom of choice. As you experienced you lost your signal. It may have been a few reasons why this happen. 1. The way the OP mentioned to flash wasn't meant for your phone. Every phone response differently. 2. The rom for whatever reason can only be used if you dirty flashed over your current system. This will not be the only time you may have to do it this way. So instead of being sarcastic with your reply, maybe try and ask the one who is helping you to explain themselves more. We are all here to help each other, and by no means was my response to your question was meant to harm your phone.
Click to expand...
Click to collapse
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
I never knew giving someone detailed information was a problem. It's funny how I never had an issue with the install, but you did. It seems you lack enough experience to realize a few things. But I will make it a point to never help you again. Whether that's to long-winded or not for you, oh well.
Sent from my SM-N920S using XDA-Developers mobile app
MeAtKeRtN said:
No misunderstanding here... I asked a specific either/or question directly related to the thread topic (twrp custom recovery version) and you either misunderstood my question or decided it required an answer other than a 'yes or no' As a result of your longwinded answer, I lost several hours working through how to get a signal back on my phone. Was pretty annoying.
Click to expand...
Click to collapse
Did you get it all figured out?
I did get it figured out. Wasn't much more than an unnecessary inconvenience that someone else might be able to avoid.
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Unidave199 said:
Ok, so something weird...
Im running KK4.4.2 with the NC5 baseband on Sprint.
I upgraded my TWRP to 2.780 to flash the recovery both first time 'dirty flashing' and the 2nd time doing a facory wipe.
I removed the battery after the flash.
When I reboot, the phone stays on the Yellow Sprint screen and the LED pusles blue slowly. So far been doing it for 15 mintues.
What am I missing?
Dave
Click to expand...
Click to collapse
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
evilvoice said:
Give it 30 minutes? It seriously takes a long time. Are you sure you want to upgrade to lollipop? In just asking because you've been on Kit Kat long after support for lollipop or this phone has long stopped. I'd suggest downloading the latest Odin and flashing that instead, unless there is something here you wanted? I'm rooted on PL1 and have no issues other than my phone being as old as it is and how many times it's been flashed.
Click to expand...
Click to collapse
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Unidave199 said:
30 minutes? Woah that is a long time. Ok I will give it a try sometime when I go to bed.
I am mainly trying to get the PL1 update and not mess with Odin if I can get around it. I would like to try and port the Darklord Marshmellow ROM and take advantage of built in google assistant
So I thought I would try them. And always get back if I need to but wanted to keep the PL1 modem updates.
I only have one problem with one other phone user... She doesnt always get my texts and I dont always get hers. I dont know if others arent getting them and just dont know but my 1 friend I text a lot so she notices when there is a gap.
Anyways. Just feeling out how I can maximize this phone's performance. NO plans on changing phones anytime soon.
Click to expand...
Click to collapse
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
evilvoice said:
I still use my note 3. Granted not for main phone as I switched to iPhone, but I use it every day. I don't really know the hesitation of using Odin, but to each their own. If you did decide to use Odin, I'd flash the ROM, boot it, go to download mode again, flash TWRP, boot recovery (so it sticks and doesn't go back to stock recovery), flash SuperSU, done. You're rooted on PL1. Hopefully you have already backed up your text messages and other various things to either SDCard or something else. I'm not sure if that survives whether you wipe and flash clean or Odin. Depending on provider, that could be your issue with text messages. If you're with Sprint, check that you are on latest PRL. If not, make sure APN settings are correct.
If you're only looking for Assistant, I had it running on stock PL1. XDA did a blog post about enabling it in Lollipop, so once you upgrade, check it out. I couldn't stay on Marshmallow. Being that these are ports and not specifically built for our phone, I ran into issue with every single ROM either not being able to place calls, text (MMS actually), or wireless/data not working. No matter what I changed APN to, I would always have issues. Some do not. I just can't recommend a port when they haven't worked for me. Some roms have been abandoned, which meant if I found one that I could at least handle, it was so outdated that it was unusable (issues had arisen and the developer had moved on so they weren't being fixed). By handling a rom, I mean that after I upgraded to iPhone, I only needed wireless to work (to connect to hotspot) and it not go into a boot loop or crash all the time (some do). Those roms I have no idea if calls or text work because I wasn't using that. A lot have issues with wireless working.
One more thing you can try is to do a flash, wait about 30 minutes. If it still doesn't boot, pull the battery and reboot into recovery. Wipe data and cache and reboot again. It should boot. It'll still take a long time. Make sure you wait the 30 minutes before pulling the battery (it should have finished upgrading your system by then). Do note that first boot from now on will take forever no matter if it's a port or stock. Lollipop and higher take a long time to upgrade. I've only had 1 or 2 roms take around 5 minutes and that's because they were minimalist and without Google apps. The phone does get a little warm and uses a lot of battery, so I'd keep it plugged in.
Please report back if you got it to work and how. Like I said, I still use mine. I still visit this forum every day even though I've had an s5 and an s7 edge. I love this phone. I need to get mine replaced because I've worn it out: broken charger port so I have to make sure the cable is plugged in a certain way and I can't touch the phone while charging, side molding is broken off in places, some of my partitions can't be changed which means the memory is failing (not even Odin flashes correctly anymore let alone custom roms). But, it still keeps on ticking.
Click to expand...
Click to collapse
Come back to Android! We miss you!!!!
Yes I am backed up and also have a Titanium Backup of everything so I am pretty much covered... I have even backed up the backups to my PC!
You have much wisdom in what you are saying. I thought I would play around with some other ROM's and see what the potential is.
I hear good things about the Darklord Reborn by Midevil and JCorderno so thought I would investigate.
I am not opposed to using Odin, but I was at work, and no access to a computer so wanted to see if I could do the upgrade 'on the fly' since I am already rooted and with recovery.
Man, waiting 30 minutes for a phone to boot sounds like a anxiety attack waiting to happen! But still wanna give it a try.
As to your USB port. Have you thought of going wireless charging? I did and haven't looked back! You can get a wireless charging back and a case that will fit at...
for the charging back
https://smile.amazon.com/Samsung-Ga...=8-2&keywords=samsung+note+3+wireless+charger
for the case
https://smile.amazon.com/gp/product/B00F3KP156/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Clone Wars....
Just wanted to put out a big THANKS for this.. I broke my Note 3 after 2,433 days (long story) but had bought a stock spare on Ebay last year... Making the switch now, but your PH1 Flashable update is making it super easy!
To let everyone who needs to use this nowdays... you will need to Flash an older TWRP (I used 2.7.8) in order to allow the Modem partition to be overwritten. Then you can flash up to 3.x to load a Android 10 based rom.