Hi.
I've siyah kernel installed in my I9300 with cyanogenmode 10.1.
When i update the cm to a new nightly, the kernel(bootloader) changes too.
Is there any way to keep the siyah kernel installed? From odin or some app?
Sorry for my bad english! :silly:
betovalladao said:
Hi.
I've siyah kernel installed in my I9300 with cyanogenmode 10.1.
When i update the cm to a new nightly, the kernel(bootloader) changes too.
Is there any way to keep the siyah kernel installed? From odin or some app?
Sorry for my bad english! :silly:
Click to expand...
Click to collapse
Read the faqs and guides before not after this is one of the basics .
Flash whatever kernel suits you .
jje
betovalladao said:
Hi.
I've siyah kernel installed in my I9300 with cyanogenmode 10.1.
When i update the cm to a new nightly, the kernel(bootloader) changes too.
Is there any way to keep the siyah kernel installed? From odin or some app?
Sorry for my bad english! :silly:
Click to expand...
Click to collapse
You install CM then you flash the kernel. So if you update, you must reinstall siyah.
Sent from my GT-I9300 using XDA Premium
IRPnet said:
You install CM then you flash the kernel. So if you update, you must reinstall siyah.
Sent from my GT-I9300 using XDA Premium
Click to expand...
Click to collapse
Thanks!!
Related
So i have a Samsung Galaxy S II and earlier today i were thinking about rooting it.
So i were preparing for the root and installed the Samsung drivers.
When it had installed it popped up a message about new firmware(ICS).
So i installed it, and i dident like it.
So i were wondering, is there a root for ICS 4.0.3 yet?And if it is, can i install Clockworkmod and Cyanogenmod 7 (or 9) on it?
Thanks in advance!
(Sorry for my bad english,Im from Norway )
-olawp
You don't need root to flash a ROM. Just enable usb debbuging and reboot in recovery, then flash whatever rom you want.
Easiest way to root your phone is to flash Siyah kernel (my opinion )
Cm7 is Gingerbread, Cm9, which is still nightly release, is 4.0.4. Cm9 comes rooted (I'm not sure about Cm7 though, but I think it's rooted too).
I personally use Cm9 with Siyah kernel because of the CWM and better recovery menu. Otherwise Cm9 comes with integrated Rom manager, so Siyah is not necessary.
Sent from my GT-I9100 using XDA
But dont you need root for clockworkmod?
Sent from my GT-I9100 using XDA
Please post in correct area
You would get lot's of help if you post this question here
http://forum.xda-developers.com/forumdisplay.php?f=1148
In new to forums, sorry
But i dident get an answer
Sent from my GT-I9100 using XDA
olawp said:
So i have a Samsung Galaxy S II and earlier today i were thinking about rooting it.
So i were preparing for the root and installed the Samsung drivers.
When it had installed it popped up a message about new firmware(ICS).
So i installed it, and i dident like it.
So i were wondering, is there a root for ICS 4.0.3 yet?
YES CF Root for one
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
And if it is, can i install Clockworkmod
See above link .
and Cyanogenmod 7 (or 9) on it?
That depends upon the instructions posted for the roms .
jje
Click to expand...
Click to collapse
olawp said:
In new to forums, sorry
But i dident get an answer
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
It's ok man. You're new. But I can see not a noob. These guys will help you out.
So cyanogenmod is working on ICS 4.0.3? I thought it only were on gingerbread ?
Sent from my GT-I9100 using XDA
Try reading dont expect others to read for you .
http://forum.xda-developers.com/showthread.php?t=1410400
jje
olawp said:
So cyanogenmod is working on ICS 4.0.3? I thought it only were on gingerbread ?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
CM Stable version only on GB
other versions are called
Experimental Mod & Nightly Builds which you can find in ICS versions also..
http://www.cyanogenmod.com/devices/samsung-galaxy-s2
olawp said:
But dont you need root for clockworkmod?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yes, you need root for CWM.
olawp said:
So cyanogenmod is working on ICS 4.0.3? I thought it only were on gingerbread ?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Cyanogenmod 7 is based on Gingerbread and it's the only STABLE Cyanogenmod for Galaxy S2 so far.
Cyanogenmod 9 is still in nightly release ("nightly" means beta (or alpha?) release: may contain bugs, crashes, not working/included apps etc.) and it's based on ICS 4.0.4.
-------------------------------------------------------
Cyanogenmod 9 comes with integrated ROM Manager which is practically CWM with other name and more functions. With ROM manager you can backup/restore current rom, partition SD card, download and install ROMs AND you can flash latest clockworkmod recovery from where you can flash all kernels/roms/updates that you want (with clockworkmod recovery I mean the volume up-home button-lock button thing It changes the default recovery and gives you more options lol)
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
ssbnasa said:
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Error status code 7 when flashing ROMs usually means the install script failed an assert when trying to determine if you have the correct model of phone that the ROM is intended for.
Where did you download the copy of CM10.1 from? Are you sure that it is for your model of phone? According to your signature, you have an I9100. Are you sure you didn't download CM10.1 for I9100G, for example?
ctomgee said:
Error status code 7 when flashing ROMs usually means the install script failed an assert when trying to determine if you have the correct model of phone that the ROM is intended for.
Where did you download the copy of CM10.1 from? Are you sure that it is for your model of phone? According to your signature, you have an I9100. Are you sure you didn't download CM10.1 for I9100G, for example?
Click to expand...
Click to collapse
Yeah, I think i chose the correct copy and that was too from cm 10.1 thread.
Anyways, if I was wrong. Can u provide me with proper links for cm10.1 for my device? It'll be very helpful of u
Currently I'm running rooted xxlsj jb fm
Sent from my GT-I9100 using xda premium
ssbnasa said:
Yeah, I think i chose the correct copy and that was too from cm 10.1 thread.
Anyways, if I was wrong. Can u provide me with proper links for cm10.1 for my device? It'll be very helpful of u
Currently I'm running rooted xxlsj jb fm
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
https://www.google.com/search?q=cm10.1+xda+i9100
ssbnasa said:
Hey guys,
I'm running rooted leaked XXLSJ JB firmware.
I recently try to flash cm 10.1 via cwm but whenever I flash.. I always get something like error 7..
What should I do, to flash properly?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
TheATHEiST said:
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
Click to expand...
Click to collapse
Thx, I didn't know this about Philz... Mainly because I'm avoiding JB until Samsung releases an official version.
TheATHEiST said:
This is because your likley using Philz kernel for leaked JB.
To flash other custom roms you will need to change kernel back to a previous ICS or JB kernel like Siyah.
Flash the kernel (.tar version) via ODIN/Mobile ODIN.
Click to expand...
Click to collapse
But I'm not using philz kernel, I never flashed it..
I just flashed this leaked firmware few days back.. That's it!!
Anyways, but most of them say to not use siyah kernel with cm 10.1... Rather use dorminax kernel with it, what you say about it?
Sent from my GT-I9100 using xda premium
Hey
Flash dorimanax but don't boot and then flash cm10.1
Regards,
Paulius
Spoiler
XDA the best
can anybody help with this noob question, im on stock XXLS8 rooted, and want to install neat rom lite, what is the easiest way?
Flash a gb kernel.
Sent from my GT-I9100 using xda app-developers app
Dr.Molestratus said:
Flash a gb kernel.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
GB? can u link this
Fulfen said:
GB? can u link this
Click to expand...
Click to collapse
I think it's very dangerous for you to flash a custom rom, if you didn't get his sarcasm.
To answer your question: why do you think developers create instructions on their first page of the rom-thread? It's not there just to be ignored.
Sent from the Matrix
Donnie Sins said:
I think it's very dangerous for you to flash a custom rom, if you didn't get his sarcasm.
To answer your question: why do you think developers create instructions on their first page of the rom-thread? It's not there just to be ignored.
Sent from the Matrix
Click to expand...
Click to collapse
yes i understood, is there any cwm for xxls8
Fulfen said:
yes i understood, is there any cwm for xxls8
Click to expand...
Click to collapse
Flash Siyah kernel v6 beta4 via ODIN.
Fulfen said:
yes i understood, is there any cwm for xxls8
Click to expand...
Click to collapse
i would suggest u to flash the latest 'Philz' kernel from the stock recovery of LS8, it will root and install the latest custom recovery on ur phone, which u can use to flash the latest Neatrom lite v4.1 zip file
TheATHEiST said:
Flash Siyah kernel v6 beta4 via ODIN.
Click to expand...
Click to collapse
Sir, AFAIK Siyah will not boot neat rom lite v4.1 when installed from its Recovery as people have already faced that issue for now
it can be flashed later (after installing neat rom lite v4.1)
im on zero bug rom with speedmod kernel, as i wanna flash to cm10,1 nightly or carbon rom, it just says installation aborted. what does this mean? do i have to go back to ics and flash a safe kernel and flash the rom? i did a full wipe too..
Maybe try to redownload the zip-file again. Could be a corrupted file.
Donnie Sins said:
Maybe try to redownload the zip-file again. Could be a corrupted file.
Click to expand...
Click to collapse
already did
galaxy16 said:
im on zero bug rom with speedmod kernel, as i wanna flash to cm10,1 nightly or carbon rom, it just says installation aborted. what does this mean? do i have to go back to ics and flash a safe kernel and flash the rom? i did a full wipe too..
Click to expand...
Click to collapse
Use siyah or dori kernel.
MerXer ManiaX said:
Use siyah or dori kernel.
Click to expand...
Click to collapse
they are both safe kernel too right?
galaxy16 said:
they are both safe kernel too right?
Click to expand...
Click to collapse
i recomend philz but yeah dori n siyah r safe too:thumbup:
Sent from my GT-I9100 using xda app-developers app
K0wneD said:
i recomend philz but yeah dori n siyah r safe too:thumbup:
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thanks im on cm10.1 already
For who wish here the 3 newest stock kernels for S3 mini I8190.
For instal use Odin.
Update:here is kernel for S3 mini I8910L and for S3 mini I8190N.
UPDATE_2:new kernel for S3 mini:XXAMC1.
UPDATE_3:kernel for S3 mini I8910T
UPDATE_4:new kernel S3 XXAMD3.
UPDATE_5:new kernel S3 XXAME1
UPDATE_6:new kernel S3L:UBAMD1 and kernel S3N:ZSAME1
UPDATE_7:new kernel for S3mini:XXAMG1
UPDATE_8:new kernel S3:XXAMG4
UPDATE_9:new kernel S3:UAAMH1
Which kernel is for what?
Any German Kernel?
Is stock kernel for XXAMA4,XXAMB2 and XXAMB3; generic firmware.
Yes AMB3 is for German Stock. Don`t forget this kernel is for GT-I8190 only.
installed ..what did i gain/recive by installing that?
i installed it with odin ..just want to make sure its that because i dont remember what was before .."3.0.31-900027 [email protected]#2 smp preempt wed feb 6 01:49:02 kst 2013"....looks like it went fine and good ...can you please tell me what i gain by that because i'm new with all that ...thanks..:good:
---------- Post added at 02:51 AM ---------- Previous post was at 02:47 AM ----------
i8190n
umarian said:
Is stock kernel for XXAMA4,XXAMB2 and XXAMB3; generic firmware.
Click to expand...
Click to collapse
in odin flash as PDA?
nazri5363 said:
in odin flash as PDA?
Click to expand...
Click to collapse
Yes man.
Can i use one of the first three kernels with my:
I8190XXAMA1 Basisbandversion?
Buildnumber JZ054K.I8190XXAMA1
THX for Help!
Com.Chakotey said:
Can i use one of the first three kernels with my:
I8190XXAMA1 Basisbandversion?
Buildnumber JZ054K.I8190XXAMA1
THX for Help!
Click to expand...
Click to collapse
Yes man you can use without problem.
better battery life...and boot speed
better battery life...and boot speed.2 things i noticed since i installed it
i8190nxxama1 dmodv2ni8190nxxama1 rev0.7
:good:
sassonno1 said:
better battery life...and boot speed.2 things i noticed since i installed it
i8190nxxama1 dmodv2ni8190nxxama1 rev0.7
:good:
Click to expand...
Click to collapse
Where can i find this ROM/Kernel? OK SORRY JUST FOUND IT...it's a ROM ;( its for me too much work to flash again all my apps etc...
When i flash my Kernel again with Odin, all Apps are deleted or is it just an "Update"?
Com.Chakotey said:
Where can i find this ROM/Kernel? OK SORRY JUST FOUND IT...it's a ROM ;( its for me too much work to flash again all my apps etc...
When i flash my Kernel again with Odin, all Apps are deleted or is it just an "Update"?
Click to expand...
Click to collapse
When flash a new kernel all apps remains and of course all data.
umarian said:
When flash a new kernel all apps remains and of course all data.
Click to expand...
Click to collapse
Mhhh still flashed the kernels with my Touch CWMR...
How do i flash it with Odin?
My Guide only show me flashing a completely ROM but this is the kernel only...
Flash in PDA in Odin thats all.
Sent from my GT-I8190 using xda premium
Com.Chakotey said:
Which kernel is for what?
Any German Kernel?
Click to expand...
Click to collapse
You're mixing kernels and radios, kernels are for booting up your system. Basically it's a system core. Radio is for RIL, signal and data.
ODIN > put the kernel file on PDA> START Flashing it is correct?
And can i flash this stock kernel even my phone is not ROOTED?
Sent from my GT-I8190 using xda app-developers app
kupalogz_11 said:
ODIN > put the kernel file on PDA> START Flashing it is correct?
And can i flash this stock kernel even my phone is not ROOTED?
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
yes....flash as pda in odin...no need root to flash via odin.....
Bit of a noob question, by my kernel ends differently, is it still safe to flash a new kernel Thx in advance, I'll post a pic
Carrier is O2 UK
Sent from my GT-I8190 using Tapatalk 2
MattJaO3D said:
Bit of a noob question, by my kernel ends differently, is it still safe to flash a new kernel Thx in advance, I'll post a pic
Carrier is O2 UK
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Yes,you can flash;its safe.
Thanks for response, will do when I get home
Sent from my GT-I8190 using Tapatalk 2