hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
Hi,
During the upgrade to WM6 I had a communication problem error.
Then I tried the recovery mode several times but my AT&T 8525 is still blocked in the 3 colors screen
I don't know what to do!
Someone to help me please.
Thanks
canlimero said:
Hi,
During the upgrade to WM6 I had a communication problem error.
Then I tried the recovery mode several times but my AT&T 8525 is still blocked in the 3 colors screen
I don't know what to do!
Someone to help me please.
Thanks
Click to expand...
Click to collapse
1. Read the Wiki
2. Try to flash a STOCK ROM like the one from the HTC site for ATT Cingular.
Hello,Every One
while upgrading htcx7500 the computer turned off
now i cannt enter to bootloader i know how but device dont respond
any help!!!!!!
Please
what about hard reset?\
and and ring round joy stick?
i was stuck in similer problem but later i discovered my battery was dead fortunatly i had spare battery it dose help
and you can try leaving it on charge and then press reset button on its on for couple of time before
if you get green ring round then hope fully u should be able to get it in to bootloader
my story is i am stuck in bootloader but dont know what to do next
DrForIslam said:
Hello,Every One
while upgrading htcx7500 the computer turned off
now i cannt enter to bootloader i know how but device dont respond
any help!!!!!!
Please
Click to expand...
Click to collapse
i
TRy Camera+reset~10 seconds) to get into the bootloader. if you get into the bootloader then you have two options. 1. if you did you unlock the device with Olipro's unlocker then you can flash any rom you want(only athena rom). 2. if not you have to find the official rom for your device then unlock then flash the Pk rom.
Good luck
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
you mast flash with bootloader this rom
http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
and then you can flash any rom
Ok thanks for reply ;-)
I test it ...
:-(
I download this ROM, but it is not functional :-(.
Same problem Device has reboot on 4% flash process :-( :-(.
Any ideas ??? Pls
i have your problem and when i flash, all rom stopped 4%, because are rom cocking. the only one that no stopped was http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html. try again.
when stopped 4% what error appear?
error code
:-( I try flash ROM from you, but same problem. Just i Flash ROM: RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
Flashing process is without a problems, but on 4% my oxygen reboot...
And flash utility write: ERROR [294]: INVALID VENDER ID
I dont know how next, thx for reply...
Hi Jurig
What did you do?
I have the same problem!!
Hard Spl Not Work
You must make hardSPL part boot and not install another version of Statistics is not compatible with HTC Oxygen.Y have 1.005.0000 SPL means that no longer kent install another rum. If you folow carefully written and why not install all the rrom with the SPL and OS but only the bone y had not separate that issue. The only solute is imei-check.co.uk order to unlock part of boothloader and will save the phone.
Thanks Geo 2000
How can I make Hard SPL? The phone is HALTED on splash screen!
I can't synchronise with PC so I can't copy anything to phone memory.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
(I have SPL 1.70.0000)
Thanks friends
There had to install the archive with the bone and spl.Had to extract with Nbextract.exe and Htcrt.exe to recover rom only with the bone. had to do with the first date HardSPL method posted here: http://forum.xda-developers.com/showthread.php?t=340283 after those install rom respectively.Yf no longer open Windows no longer can repair only by sal the program from imei-check.co.uk. good luck
jurig said:
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
Click to expand...
Click to collapse
Try to make hard-reset..
How to do the Hard Reset?
Please help...
My Oxy is halted on HTC logo splash screen...
RA
abramq said:
Please help...
Click to expand...
Click to collapse
Press and keep two top soft-keys. Press "Power".
Wait (keep two top soft-keys!) until message "Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Reyter said:
"Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Click to expand...
Click to collapse
Oh, thans, but... there is: "Press Send key to restore..."
Where is the "Send" key? (pressing "0" doesn't help)
Probably death of my good Oxy...:-((
RA
send key is your dial number key
nemphis said:
send key is your dial number key
Click to expand...
Click to collapse
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Press "Green" button
abramq said:
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Click to expand...
Click to collapse
What SPL are you? IF YOU DO NOT 7.77.7777 and 1.05.0000 MAY CANT NOT DO NOTHING. If you 7.77.7777 May settled once rom.not matter which of them install only itself to be part of the bone
SOLVED)
Thanks to good man it is ok now
http://forum.xda-developers.com/showthread.php?t=391602&page=4
RA
Not Solved for me!
I downloaded that "Russian signed" rom and tryed to flash my Orange SPV C100 (equivalen to Htc Oxygen): Same problem, the operation failed and the phone restarts at 4%
(My SPL version is 1.07.0000)
i downloaded a new ROM here http://soft4vn.net/forum/showthread.php?t=3393 but when I tried to upgrade my phone, it stopped at 4%, then the phone resets itself. Please tell me what's wrong. my phone is unlocked branded HTC S310. Thank you
It is my rom 6.0..
Look this http://forum.xda-developers.com/showthread.php?t=360346
how do I install Hard-SPL? i downloaded and copied it to the phone but couldnt execute it. please help
I also have the same problem, a tried to upgrade my SPV C100 alias HTC S310 with 3 different roms and all give the same error, after the setup reaches 4% it resets and the pc updater gives error 280...
is it because i have my phone netowork locked?
i solved the problem by using hard-spl... thanks
edgeofthestring said:
i solved the problem by using hard-spl... thanks
Click to expand...
Click to collapse
i know you did it...but how? please explain the steps. thank you
charlietruong said:
i know you did it...but how? please explain the steps. thank you
Click to expand...
Click to collapse
Solution is on this post http://forum.xda-developers.com/showthread.php?t=340283 , read it carefully and there is your solution .