I just checked Motorola's global update schedule and it is telling me that my XT910 (from South Africa) will remain on 4.0.4! I think this is ridiculous. What are my choices? Perhaps wait for an official firmware and not the leaked official, and then just flash anyways? I'm currently using 673.94.328.XT910.MERetail.en.06.
Wait for rooting and official. Stock ROM is not OK!
Sent from my XT910 using xda premium
Flash any European JB if you wanna use English or another Eu language. Cheers
Sent from my XT910 using xda premium
I was thinking that same thing. I only need English. But my plan is to wait it out a bit - especially until root is possible.
So until JB is rolled out more extensively, I guess I'll have to just hang on until a "tested, safe" official firmware is available for me. I trust it wont be an issue to use another regions' firmware? I will probably have to check in around that time then top find out more.
Sent from my Moto Razr Maxx XT910 using the xda-developers' app
d.casper.b said:
I trust it wont be an issue to use another regions' firmware? I will probably have to check in around that time then top find out more.
Click to expand...
Click to collapse
It won't be an issue. I'm also from SA. Flashed to EU without issue and upgraded to JB.
No issues buddy! I had 672.180.41.XT910.NonEFIGSRetail.en.EU with ICS 4.0.4. Motorola denied to update it to JB . So first I tried CM 10.1, everything was working great except no car home app in 4.2.2, so tried to install the official 4.1.2 by Moto. And now I am successfully running both CM 10.1 and 982.124.14.XT910.Retail.en.EU with root access! .. Really loving the update, no issues till now
Sent from my XT910 using xda app-developers app
Could you please describe the steps?
Thanks
Sent from my XT910 using Tapatalk 2
install latest CM 11 / 12 nightly.
Related
Any freakin Idea about ICS in India?
When is it launching.
My FOTA updater says no updates found
Sent from my GT-I9100 using xda premium
Brother I understand that you are very excited about the ics release, but I installed it and is pure [email protected] , wait for 2 or 3 months for the os to work correctly, cheers!
Sent from my GT-I9100
ICS Is Ready for INDIA
Dear Friend,
ICS is ready for India, Download from the below link. Use Odin to install it.
It will some time to come on Kies, If you want it before it comes on Kies.
Its the Kies version and 100% safe to install.
http://skywanker.net/roms/intratech/Firmwares/Unbranded/India/GT-I9100_INU_I9100XXLPQ_I9100ODDLP7_I9100DDLP8.7z
lvvine said:
Dear Friend,
ICS is ready for India, Download from the below link. Use Odin to install it.
It will some time to come on Kies, If you want it before it comes on Kies.
Its the Kies version and 100% safe to install.
http://skywanker.net/roms/intratech/Firmwares/Unbranded/India/GT-I9100_INU_I9100XXLPQ_I9100ODDLP7_I9100DDLP8.7z
Click to expand...
Click to collapse
This isn't authentic by any means. The Bangladesh firmware is modified to an Indian one
I'm not too happy with LPQ firmware anyways.. Reverted back to gb la4 firmware..
Thanx guys for the replies.
I mean the KIES version?
Anyone has that?
Sent from my GT-I9100 using xda premium
Hello Mr.impatient
Indian official ICS will be released this week in Kies.So just wait 1-2 more days.
I will not comment about that Indian ICS which is already here in some thread.
Indian official ICS release will not come through OTA.
It will be only through Kies.
Sent from my Galaxy Tab using TT
Me too waiting for the update through Kies. No update from Samsung's Twitter account as well. :-/
Sent from my GT-I9100 using XDA
Ya I have set up google alerts too.
Sent from my GT-I9100 using xda premium
ICS for I9100G
Does anybody have any idea about when the ICS is going to release for Indian I9100G version?
Thanks
Folks, got any updates?
Sent from my GT-I9100 using XDA
Just flash XXLPQ or the indian rom is leaked at intra's thread
http://skywanker.net/roms/intratech...9100_INU_I9100XXLPQ_I9100ODDLP7_I9100DDLP8.7z
sahibunlimited said:
Just flash XXLPQ or the indian rom is leaked at intra's thread
http://skywanker.net/roms/intratech...9100_INU_I9100XXLPQ_I9100ODDLP7_I9100DDLP8.7z
Click to expand...
Click to collapse
Unless, of course, you are an I9100G user. (Of which there was at least one posting in this thread.)
No offense, sahibunlimited... just want to be clear.
Any updates?
Sent from my GT-I9100 using xda premium
chintz24 said:
Any updates?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
You'll know when a crapton of people spam the board with new threads announcing it.
sahibunlimited said:
Just flash XXLPQ or the indian rom is leaked at intra's thread
http://skywanker.net/roms/intratech...9100_INU_I9100XXLPQ_I9100ODDLP7_I9100DDLP8.7z
Click to expand...
Click to collapse
I am just a little skeptic about using Odin (scared rather). And now that I'm on 2.3.6, zergRush exploit doesn't work due to which I'm unable to root. Hence waiting for the update through Kies.
Sent from my GT-I9100 using XDA
I'm on the Ressurection Remix Rom by westcrip. Quite stable and way better than dear old TW thats rolled out with the ICS update from samsung.
d4RkN355 said:
I am just a little skeptic about using Odin (scared rather). And now that I'm on 2.3.6, zergRush exploit doesn't work due to which I'm unable to root. Hence waiting for the update through Kies.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
U don't need root to flash that
their is not risk in using odin
zergRush doesn't work after 2.3.5
d4RkN355 said:
I am just a little skeptic about using Odin (scared rather). And now that I'm on 2.3.6, zergRush exploit doesn't work due to which I'm unable to root. Hence waiting for the update through Kies.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Odin is safer than Kies in my opinion.
You can TRY the "memory crash" method when using zergRush. Just open a ton of apps and exit using the Home button instead of Back to fill up as much memory as possible (at least over 500 mb used), then use zergRush.
I don't know if it will work for you or not, but it's worth a shot.
If not, just flash a kernel that roots for you, like CF-Root or Siyah.
How the hell does it matter when you get the update.
Its the same Samsung ****!
Id say stay on GB or use CM9!
But then again thats what i think.
So I asked a question like three days ago and I think I wasn't very clear
I have a Mexican SG3 and I want to try one of the European Jelly Bean Roms that have been out for weeks but I haven't really understood how does the builds and basebands work on this phone, I used to have an epic 4g touch from Sprint and I was used to only have one kind of baseband because it's an us phone only, but with this one I don't know what all the XX(insert random letters here) builds mean cause my phone has a build number of UBBLG2 and I'm afraid that if I install one of the jelly bean roms my data service will be lost...could someone please tell me how does this work
Sent from my GT-I9300
since its the international s3, you have no problem.
If you lose your service flash a compatible modem/radio from here http://forum.xda-developers.com/showthread.php?t=1740061
Sent from my GT-I9300 using xda app-developers app
but if there's no JB modem for my GS3 can I use a ICS modem that is from my region?!
Sent from my Nexus 10
*GalaxyDev* said:
but if there's no JB modem for my GS3 can I use a ICS modem that is from my region?!
Sent from my Nexus 10
Click to expand...
Click to collapse
There is only one modem for JB, much more simple than allthe ics stuff. In the pointed thread download XXDLID baseband if you don't already have it.
Striatum_bdr said:
There is only one modem for JB, much more simple than allthe ics stuff. In the pointed thread download XXDLID baseband if you don't already have it.
Click to expand...
Click to collapse
thank you so basically with the new JB Roms it doesn't matter what baseband I'll have it'll work with my carrier it's because in the thread I saw a guy I think yesterday that from Argentina flashed the last Rom of JB and flashed the ICS Baseband...Why?!
Sent from my Nexus 7 using xda app-developers app
*GalaxyDev* said:
thank you so basically with the new JB Roms it doesn't matter what baseband I'll have it'll work with my carrier it's because in the thread I saw a guy I think yesterday that from Argentina flashed the last Rom of JB and flashed the ICS Baseband...Why?!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Don't worry, just flash the jb rom. If you encounter andyproblem, then you should flash another modem.
Sent from my GT-I9300 using xda app-developers app
I even have 'csc unknown' and no problem at all.
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Australian, plus just found the question thread
Hey man if your comfortable using rsd lite i recommend viewing this thread to get JB
http://forum.xda-developers.com/showthread.php?p=39189048
I'm from NZ , purchased my fone here but its from Australia. I'm running JB from the above thread and its working just fine
Sent from my XT910 using xda app-developers app
does your...
does your system version include either XXX.XX.XXX.XT910.VF.en.Au or XXX.XX.XXX.XT910.Optus.en.Au
marconz said:
Hey man if your comfortable using rsd lite i recommend viewing this thread to get JB
http://forum.xda-developers.com/showthread.php?p=39189048
I'm from NZ , purchased my fone here but its from Australia. I'm running JB from the above thread and its working just fine
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Sorry can only tell you what I'm on now 982.184.14.retail.en.eu (jb)
I was originally on a gb au ROM a long time ago, couldn't stand waiting for ics so i switched to en.eu ics from there i upgraded to jb
Sent from my XT910 using xda app-developers app
Sent from my XT910 using xda premium
I am on 673.94.328.xt910retail.asiaretail.en.03
As there is no JB Update in india. Is it worth to upgrade from other country ota or good to stick to ICS.
Sent from my XT910 using xda premium
Thanx in advance
Sent from my XT910 using xda premium
my opinion is to try 4.2.2 ROMS like AOKP and CM 10.1 cuz these work well on ICS roms and moreover the service center is **** in india if something really goes wrong then u wouldn't want to get stuck with those guys believe me those guys don't even know the diff b/w Factory cable and data cable so better wait for official OTA and then think abt it ....why try for 4.1.2 when u have 4.2.2 well that's just my opinion
assassin34 said:
my opinion is to try 4.2.2 ROMS like AOKP and CM 10.1 cuz these work well on ICS roms and moreover the service center is **** in india if something really goes wrong then u wouldn't want to get stuck with those guys believe me those guys don't even know the diff b/w Factory cable and data cable so better wait for official OTA and then think abt it ....why try for 4.1.2 when u have 4.2.2 well that's just my opinion
Click to expand...
Click to collapse
You are right there is no such good service provided in India. Also there is no hope for jb upgrade as Motorola clearly declared there will b no JB update in India. We have to stick to ics only. The custom roms like aokp can not b installed on stock slot.
Sent from my XT910 using xda premium
shakti15 said:
You are right there is no such good service provided in India. Also there is no hope for jb upgrade as Motorola clearly declared there will b no JB update in India. We have to stick to ics only. The custom roms like aokp can not b installed on stock slot.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Razr Maxx sales have stopped in India since last 1 month, they might be releasing the Razr Maxx HD with JB 4.1 soon , so dont expect any JB update.
You can go for the EU or China - These match Indian radio & baseband, To flash any of the other custom ROM on JB base you will need to flash a JB. I am using the US Verizon JB leak with Jellywiz RL7 and D-Wiz JBX with Zero problems.
link : http://forum.xda-developers.com/showthread.php?t=2078021&highlight=razrguy
Make sure you read the OP's instructions carefully before u try flashing.
SAJdroid said:
Razr Maxx sales have stopped in India since last 1 month, they might be releasing the Razr Maxx HD with JB 4.1 soon , so dont expect any JB update.
You can go for the EU or China - These match Indian radio & baseband, To flash any of the other custom ROM on JB base you will need to flash a JB. I am using the US Verizon JB leak with Jellywiz RL7 and D-Wiz JBX with Zero problems.
link : http://forum.xda-developers.com/showthread.php?t=2078021&highlight=razrguy
Make sure you read the OP's instructions carefully before u try flashing.
Click to expand...
Click to collapse
Thanx for you advice .i am thinking to go for Retail EU or CN which would b good?
Sent from my XT910 using xda premium
I suggest you to use the retail EU version than the chinese version because the china version have some chinese bloatware apps
Sent from my GT-N7100 using xda app-developers app
Hello!
I'm tierd of the boring official JB stock on my Motorola Razr Maxx and want to install the RLS7 ROM on my device. To do this, I need the christmas leak kernel. Is it possible to install this kernel or the leaked stock rom?
My current system version is 982.124.14.XT910.Retail.en.EU.
Thank you (and sorry for bad english) :laugh:
henricson said:
Hello!
I'm tierd of the boring official JB stock on my Motorola Razr Maxx and want to install the RLS7 ROM on my device. To do this, I need the christmas leak kernel. Is it possible to install this kernel or the leaked stock rom?
My current system version is 982.124.14.XT910.Retail.en.EU.
Thank you (and sorry for bad english) :laugh:
Click to expand...
Click to collapse
I have been asking this for days
Sent from my XT910 using xda app-developers app
Any help people
Sent from my XT910 using xda app-developers app
Are you on ota path?
Sent from my XT912 using xda app-developers app
Stock
Sent from my XT910 using xda app-developers app
You should be able to use matt's utility to switch kernels to flash a leak kernel ROM.
Please leave a thanks if I helped you!
i need the kernel
I have found it
magicninja said:
i need the kernel
Click to expand...
Click to collapse
http://www.droidforums.net/forum/droid-razr-hacks/216562-droid-razr-utility-1-8-a.html
(I have not tested it yet but it seems good )
EDIT: Only for Verzion