Hello!
I'm tierd of the boring official JB stock on my Motorola Razr Maxx and want to install the RLS7 ROM on my device. To do this, I need the christmas leak kernel. Is it possible to install this kernel or the leaked stock rom?
My current system version is 982.124.14.XT910.Retail.en.EU.
Thank you (and sorry for bad english) :laugh:
henricson said:
Hello!
I'm tierd of the boring official JB stock on my Motorola Razr Maxx and want to install the RLS7 ROM on my device. To do this, I need the christmas leak kernel. Is it possible to install this kernel or the leaked stock rom?
My current system version is 982.124.14.XT910.Retail.en.EU.
Thank you (and sorry for bad english) :laugh:
Click to expand...
Click to collapse
I have been asking this for days
Sent from my XT910 using xda app-developers app
Any help people
Sent from my XT910 using xda app-developers app
Are you on ota path?
Sent from my XT912 using xda app-developers app
Stock
Sent from my XT910 using xda app-developers app
You should be able to use matt's utility to switch kernels to flash a leak kernel ROM.
Please leave a thanks if I helped you!
i need the kernel
I have found it
magicninja said:
i need the kernel
Click to expand...
Click to collapse
http://www.droidforums.net/forum/droid-razr-hacks/216562-droid-razr-utility-1-8-a.html
(I have not tested it yet but it seems good )
EDIT: Only for Verzion
Related
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Australian, plus just found the question thread
Hey man if your comfortable using rsd lite i recommend viewing this thread to get JB
http://forum.xda-developers.com/showthread.php?p=39189048
I'm from NZ , purchased my fone here but its from Australia. I'm running JB from the above thread and its working just fine
Sent from my XT910 using xda app-developers app
does your...
does your system version include either XXX.XX.XXX.XT910.VF.en.Au or XXX.XX.XXX.XT910.Optus.en.Au
marconz said:
Hey man if your comfortable using rsd lite i recommend viewing this thread to get JB
http://forum.xda-developers.com/showthread.php?p=39189048
I'm from NZ , purchased my fone here but its from Australia. I'm running JB from the above thread and its working just fine
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Sorry can only tell you what I'm on now 982.184.14.retail.en.eu (jb)
I was originally on a gb au ROM a long time ago, couldn't stand waiting for ics so i switched to en.eu ics from there i upgraded to jb
Sent from my XT910 using xda app-developers app
my niece has a vibrant with an old team whiskey 2.2 rom and i want to update it to a newer stable rom any recomedations would be great. Also links and directions how to install and any isues coming from froyo rom ? Thanks
godcomplex37 said:
my niece has a vibrant with an old team whiskey 2.2 rom and i want to update it to a newer stable rom any recomedations would be great. Also links and directions how to install and any isues coming from froyo rom ? Thanks
Click to expand...
Click to collapse
It depends are you wanting to get on the newest or what. I personally have to ROMs that I've ported and they're very stable
Sent from my SGH-T959 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=2167819
http://forum.xda-developers.com/showthread.php?t=2167857
Those are my two roms I ported. Both are android 4.2.2
Sent from my SGH-T959 using xda app-developers app
skinzy98 said:
http://forum.xda-developers.com/showthread.php?t=2167819
http://forum.xda-developers.com/showthread.php?t=2167857
Those are my two roms I ported. Both are android 4.2.2
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
There gonna be any problems comimg from 2.2 custom rom to one of these? Any special procedures?
godcomplex37 said:
There gonna be any problems comimg from 2.2 custom rom to one of these? Any special procedures?
Click to expand...
Click to collapse
I would normally say flash to ICS. But! There is the chance of the EU bug. Therefore I would try to flash to jelly bean first if your on stock and rooted maybe flash a custom froyo then go up to jellybean. Don't forget gapps
Sent from my SGH-T959 using xda app-developers app
I installed cm 10.1 over my stock rom via SS accidentally without having a backup... Now I`m running cm 10.1 on stock alot and slot 1, but only the slot one works (as supposed).
I had eclipse v4 ICS rom installed on stock, which i did via BMM, and now I`m not sure what to do.
Since the rom installed on slot 1 (cm 10.1) is working with no issues, I`m leaving it this way for a while, but I`d really like to clean up installations in future to install JB on stock with no slots, since I`d have more internal space available.
So the question is: What do I have to do to clean up my razr gsm and start over from a clean JB on stock slot (LATAM, isn`t released yet, right?).
And finally, should I face any issues if I install EU JB release?
Thanks in advance!
If you want to start fresh you have to go to stock recovery and full wipe, the flash your stock latam firmware of choice..
Sent from my XT910 using xda premium
Thanks! I should search for fastboot files, right?
kamikass said:
Thanks! I should search for fastboot files, right?
Click to expand...
Click to collapse
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
kamikass said:
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
Click to expand...
Click to collapse
i think the 6.7.2 one, because i flashed retail eu ics and the number is 6.7.2
Well, I`m trying 6.7.2-180_SLC-35_LATAM_SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip... All I should do is restart phone on AP Fastboot, full wipe and flash it? (RSD?)
Btw, do I have to uninstall SS or delete rom slots?
kamikass said:
Btw, do I have to uninstall SS or delete rom slots?
Click to expand...
Click to collapse
Maybe yes
Sent from my GT-I9300 using xda app-developers app
I just checked Motorola's global update schedule and it is telling me that my XT910 (from South Africa) will remain on 4.0.4! I think this is ridiculous. What are my choices? Perhaps wait for an official firmware and not the leaked official, and then just flash anyways? I'm currently using 673.94.328.XT910.MERetail.en.06.
Wait for rooting and official. Stock ROM is not OK!
Sent from my XT910 using xda premium
Flash any European JB if you wanna use English or another Eu language. Cheers
Sent from my XT910 using xda premium
I was thinking that same thing. I only need English. But my plan is to wait it out a bit - especially until root is possible.
So until JB is rolled out more extensively, I guess I'll have to just hang on until a "tested, safe" official firmware is available for me. I trust it wont be an issue to use another regions' firmware? I will probably have to check in around that time then top find out more.
Sent from my Moto Razr Maxx XT910 using the xda-developers' app
d.casper.b said:
I trust it wont be an issue to use another regions' firmware? I will probably have to check in around that time then top find out more.
Click to expand...
Click to collapse
It won't be an issue. I'm also from SA. Flashed to EU without issue and upgraded to JB.
No issues buddy! I had 672.180.41.XT910.NonEFIGSRetail.en.EU with ICS 4.0.4. Motorola denied to update it to JB . So first I tried CM 10.1, everything was working great except no car home app in 4.2.2, so tried to install the official 4.1.2 by Moto. And now I am successfully running both CM 10.1 and 982.124.14.XT910.Retail.en.EU with root access! .. Really loving the update, no issues till now
Sent from my XT910 using xda app-developers app
Could you please describe the steps?
Thanks
Sent from my XT910 using Tapatalk 2
install latest CM 11 / 12 nightly.
Hi team
Thanks for the wonderful Stock ROM in the development. Section
Im having Moto Razr Maxx (XT910) with Asian Retail ICS 4.0 ROM.
& 3.0.6-g3c83d29 kernal.
I have activated Safe strape. 3.11 with slot0-Stock ICS 4.0
Slot1-Cyanogen mod 10.1 RC05
Slot2- tried Stock EU ROM as instructed. But getting blank screnn after reboot. !!!!
Can you pl. Help me to resolve the issue??
Let me tell you, I have not installed kernel as suggested. In this thread.....
Sent from my XT910 using Tapatalk 2
You must flash the JB kernel because that rom is Jelly Bean and you are still on ICS...
Sent from my Razr XT910
Thanks mate..
So I want to load JB kernel on slot2 right??
I have already downloaded specific JB kernel (ArtMod 14 number. Kernel) but its .image file hence not showing in safe strape'install' menu.
Bro. Can you please give more detail on how to load the same??
Im really fedup with the battery life On CM 10.1....pls. help....
Sent from my XT910 using Tapatalk 2
Pl. Help brothers!!!!
Sent from my XT910 using Tapatalk 2
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
demonshouter said:
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
Anybody. Plsssssssss... help
Sent from my XT910 using Tapatalk 2
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
I'm also using BMM that can flash boot.img directly. But I think you can do this guide: http://forum.xda-developers.com/showthread.php?t=2078021
CAREFULL: use just the kernel flashing part of the guide: fastboot flash boot boot.img
and be sure you flash the correct boot.img that you downloaded. you can download the right kernel from the other artur mode:http://forum.xda-developers.com/showthread.php?t=2260951
one more thing. I never done that after SS was installed. So better wait for others to confirm that it's OK before you actually doing this.
Maybe you can also try this tool to flash kernel: http://forum.xda-developers.com/showthread.php?t=2399385
He says it support any fastboot device.
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
hi all! i have some minor issues with the rom and i hope you can help me...
1. the phone (razr maxx) didnt charge while powered off
2. i cant seem to install the smart actions i so love!
does anyone have any idea to fix those?
sun1983 said:
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
sun1983 said:
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to erase your Cid if you are from Europe,otherwise yes.
And if this is your first time that you want to install some rom on System 2,you must activate the partition.
Here http://forum.xda-developers.com/showthread.php?t=2325764 are some video tutorials how to use BMM.
Sent from my Razr XT910