ViperAmaze 1.6.5
Faux 029
S-On
4EXT
My sensors and rotation have stopped working. I've factory reset and soft reset. Flashed stock and custom ROMs and kernels. During setup the screen rotates but minutes after rotation, gyro, and etc stop working. I've calibrated and all is well. The weird part is that if I take my sim out it works perfectly. Any help would be awesome.
Sent from my HTC_Amaze_4G using Tapatalk 2
Stopfakn said:
ViperAmaze 1.6.5
Faux 029
S-On
4EXT
My sensors and rotation have stopped working. I've factory reset and soft reset. Flashed stock and custom ROMs and kernels. During setup the screen rotates but minutes after rotation, gyro, and etc stop working. I've calibrated and all is well. The weird part is that if I take my sim out it works perfectly. Any help would be awesome.
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
well i don't think it is a software issue...did you tried a different sim card?
hatim_rajput said:
well i don't think it is a software issue...did you tried a different sim card?
Click to expand...
Click to collapse
Yeah I had T-Mobile send me out a different sim card and the issue still remains
Sent from my HTC_Amaze_4G using Tapatalk 2
Stopfakn said:
Yeah I had T-Mobile send me out a different sim card and the issue still remains
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
by which method you flashed stock??
hatim_rajput said:
by which method you flashed stock??
Click to expand...
Click to collapse
4ext. I should've said stock based roms
Sent from my HTC_Amaze_4G using Tapatalk 2
Stopfakn said:
4ext. I should've said stock based roms
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
i see....are you s-off or s-on?
---------- Post added at 10:33 PM ---------- Previous post was at 09:59 PM ----------
Stopfakn said:
4ext. I should've said stock based roms
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
well,boot into 4ext,do a super wipe then try to flash stock via hboot by renaming stock.zip file as PH85IMG,see if this helps..
Related
Hey, so I bought EVO 3D couple of days ago and when I installed silver-needle kernel, my phone crashed. When I try to turn it on, after three secs I see a title htc, after 10 more seconds it dissappears and then I see title htc again. And a phone doesnt turn on at all. Can u help me please ??!!
Sounds like a bad flash or some incompatibility with the kernel. What hboot and Rom ate you using?
Sent from my PG86100 using Tapatalk 2
coal686 said:
Sounds like a bad flash or some incompatibility with the kernel. What hboot and Rom ate you using?
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
He flashed a CDMA Kernel on a GSM phone. Not sure what you can do.
Wipe everything and flash a cdma kernel.
Edit: meant wipe all and flash a gsm kernel the phone will boot.
#Root-Hack_Mod*Always\
laie1472 said:
Wipe everything and flash a cdma kernel.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
I say run a stock gsm ruu.
Sent from my PG86100 using XDA
tgruendler said:
He flashed a CDMA Kernel on a GSM phone. Not sure what you can do.
Click to expand...
Click to collapse
Silver needle is a CDMA kernel? Never heard of it. Anyway, I did not know what type of phone since I am on Tapatalk and do not see the left sidebar or signatures.
If it is the wrong type of kernel, then a flash of the right type of kernel should fix it.
Sent from my PG86100 using Tapatalk 2
Hello again. I'm here with another question from 3d land.
My EVO 3D CDMA is flashed to Boost Mobile (meid/esn was changed). I see that the new ota is available.
Is it safe to flash this firmware? Will it reset my esn/meid to the original?
Sent from my PG86100 using xda premium
Datguy_n_Disguy said:
Hello again. I'm here with another question from 3d land.
My EVO 3D CDMA is flashed to Boost Mobile (meid/esn was changed). I see that the new ota is available.
Is it safe to flash this firmware? Will it reset my esn/meid to the original?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I'm 98% sure you will have no problem with the esn/meid reverting
did you flash yourself (have donor) or not?
louforgiveno said:
I'm 98% sure you will have no problem with the esn/meid reverting
did you flash yourself (have donor) or not?
Click to expand...
Click to collapse
No, cell bros flashed it. They used a donor but I guarantee that they threw it away a while ago
Sent from my PG86100 using xda premium
looking for help too , someone else flashed my phone for me and i want to upgrade to the new ics room but im scared because it had new radio hboot and all that and i dont my flash to revert back ,
I would like to know if this is going to cause any issues as well. I am in the same boat as everyone else.
Anyone?
Sent from my PG86100 using xda premium
Nevermind.
Verified that flashing the new firmware does NOT affect boost mobile flash.
Datguy_n_Disguy said:
Nevermind.
Verified that flashing the new firmware does NOT affect boost mobile flash.
Click to expand...
Click to collapse
so you flashed the new firmware on your flashed phone and it still works? im about to install it on mines
RoyalYeo said:
so you flashed the new firmware on your flashed phone and it still works? im about to install it on mines
Click to expand...
Click to collapse
Yup. Nothing really seems different either.
Sent from my PG86100 using xda premium
Datguy_n_Disguy said:
Yup. Nothing really seems different either.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Hey do u have radio disconnect like alot of us are having. Can't seem to figure this out. I have 2 EVO 3ds one is s on and has no root even on stock gingerbread. The other one is s off with cool Rom v7 with latest firmware and I still random straight to voicemail problems. When I call out it returns to normal. I'm going to try something else tomorrow I'm going to turn this phone off and turn my diner back on for the day and see if it is happening on the doner.
gmzombie said:
Hey do u have radio disconnect like alot of us are having. Can't seem to figure this out. I have 2 EVO 3ds one is s on and has no root even on stock gingerbread. The other one is s off with cool Rom v7 with latest firmware and I still random straight to voicemail problems. When I call out it returns to normal. I'm going to try something else tomorrow I'm going to turn this phone off and turn my diner back on for the day and see if it is happening on the doner.
Click to expand...
Click to collapse
When did that issue start? after the firmware update, or before?
louforgiveno said:
When did that issue start? after the firmware update, or before?
Click to expand...
Click to collapse
I had it for a while now. At least 3 months or so. No rhyme or reason but I've tried everything it seems.
gmzombie said:
I had it for a while now. At least 3 months or so. No rhyme or reason but I've tried everything it seems.
Click to expand...
Click to collapse
you can check your "accloc"...(something like that)...settings in qpst.....the lower the number, the higher priority your phone has on the tower. (2) is a good number to be set at....i think boost default is (5)
louforgiveno said:
When did that issue start? after the firmware update, or before?
Click to expand...
Click to collapse
I had it for a while now. At least 3 months or so. No rhyme or reason but I've tried everything it seems.
Datguy_n_Disguy said:
Yup. Nothing really seems different either.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
so i just download the firrmware file goto into recovery and install from zip? sorry im a big noob when it comes to android '/
louforgiveno said:
you can check your "accloc"...(something like that)...settings in qpst.....the lower the number, the higher priority your phone has on the tower. (2) is a good number to be set at....i think boost default is (5)
Click to expand...
Click to collapse
mine was already set to 2
---------- Post added at 10:11 PM ---------- Previous post was at 09:31 PM ----------
gmzombie said:
mine was already set to 2
Click to expand...
Click to collapse
its weird because i have 2 evo 3ds one has s-on and stock gingerbread and the other one is s-off with cool rom v7 and they both do the same thing. it starts off good when i do a master reset and hands free activation but with 2 days its back to normal?
RoyalYeo said:
so i just download the firrmware file goto into recovery and install from zip? sorry im a big noob when it comes to android '/
Click to expand...
Click to collapse
Nope. You name the zip PG86IMG and place it in the root of your sd and boot into hboot
Sent from my PG86100 using xda premium
how about for you datguy n disguy do you have this issue at all?
gmzombie said:
how about for you datguy n disguy do you have this issue at all?
Click to expand...
Click to collapse
I don't think so... Not many people call me, but when they do it always works like it should...
Sent from my PG86100 using xda premium
Datguy_n_Disguy said:
I don't think so... Not many people call me, but when they do it always works like it should...
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
do i need to be s-off to flash the new firmware? -.- cause im s-on does this mean i cant install ics?
Is there an ODIN for Stock OEM i605VRALL4 available yet to flash straight to stock VRALL4? I haven't been able to locate one.
Thanks.
H3Dude said:
Is there an ODIN for Stock OEM i605VRALL4 available yet to flash straight to stock VRALL4? I haven't been able to locate one.
Thanks.
Click to expand...
Click to collapse
I don't think so. You can always flash previous version here, http://forum.xda-developers.com/showthread.php?t=2040264 and get it OTA updated.
dcdgoth said:
I don't think so. You can always flash previous version here, http://forum.xda-developers.com/showthread.php?t=2040264 and get it OTA updated.
Click to expand...
Click to collapse
been hesitant to do this because I thought that the new bootloader would cause problems restoring to an older image..
Thanks.
H3Dude said:
been hesitant to do this because I thought that the new bootloader would cause problems restoring to an older image..
Thanks.
Click to expand...
Click to collapse
Are you unlocked?
Sent from my SCH-I605 using Tapatalk 2
kintwofan said:
Are you unlocked?
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
yes
H3Dude said:
yes
Click to expand...
Click to collapse
Then you're safe to Odin the stock jb image
Sent from my SCH-I605 using Tapatalk 2
kintwofan said:
Then you're safe to Odin the stock jb image
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Thanks!!!
H3Dude said:
been hesitant to do this because I thought that the new bootloader would cause problems restoring to an older image..
Thanks.
Click to expand...
Click to collapse
works good, I've flashed back three times now with no issues at all
Sent from my SCH-I605 using Tapatalk 2
mike7728 said:
works good, I've flashed back three times now with no issues at all
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
thanks for answering this. I restored back with no problems and am now stock VRALL4 again.
mike7728 said:
works good, I've flashed back three times now with no issues at all
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
So you flashed back to stock, took the update then unlocked again?
Sent from my SCH-I605 using Tapatalk 2
I flashed back. Took update. Haven't unlocked again yet. But i did unlock on update last time.
Sent from my SCH-I605 using xda app-developers app
I've been considering going back to stock. Any particular reason you did it?
Sent from my SCH-I605 using Tapatalk 2
I was debating giving to my son for his birthday, assuming I can find another phone to play with, and wondered if it would even work. I also had some issues with with volume getting low during phone calls and wanted to see if it happens on stock rom.
Sent from my SCH-I605 using xda app-developers app
Do y'all know if going back to stock would fix connection issues. Im having terrible data connection issues ever since I flashed the jb 10 rom. I tried doing a nan restore but still have connection issues. And the *228 isnt working now either.
Sent from my SCH-I605 using xda app-developers app
donelam304 said:
Do y'all know if going back to stock would fix connection issues. Im having terrible data connection issues ever since I flashed the jb 10 rom. I tried doing a nan restore but still have connection issues. And the *228 isnt working now either.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
You should never use *228 on an lte device. It usually cooks the sim card. I would go to stock and probably get a new sim now. A ROM usually can't affect signal unless it's an AOSP ROM, but if that's the only variable changed then it would make sense to undo it.
Sent from my SCH-I605 using Tapatalk 2
Which file do you recomend I flash or use odin with. The main one or the one that lets you keep the unlocked bootloader.
donelam304 said:
Which file do you recomend I flash or use odin with. The main one or the one that lets you keep the unlocked bootloader.
Click to expand...
Click to collapse
I would use the full JB stock image. So you're full stock and also if you have to go into Verizon is already ready. Also I suggest triangle away before doing it
Sent from my SCH-I605 using Tapatalk 2
kintwofan said:
I Also I suggest triangle away before doing it
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
I'm not to sure what you mean by this. I'm not familiar with this term.
donelam304 said:
I'm not to sure what you mean by this. I'm not familiar with this term.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=22462960
Sent from my SCH-I605 using Tapatalk 2
Awesome. Thanks so much for informing me of this.
Aparently J-bear no longer supports windows and I'm having trouble with getting Ubuntu to find my hard drive. Does anyone have the S off kit somewhere by chance?
Edit: got it thanks.
Sent from my HTC_Amaze_4G using xda app-developers app
Run Ubuntu from a LiveCD. That's how I ran Juopunutbear and did S-Off on my Amaze.
Idk why ppl are so gung-ho about s=off for this phone... I thought I solved all those issues when I had madmaxx82 come over to this phone with smart flash.
People must love custom splash screens lol
Sent from my SGH-T999 using Tapatalk 2
GalaxyS3Guy said:
Idk why ppl are so gung-ho about s=off for this phone... I thought I solved all those issues when I had madmaxx82 come over to this phone with smart flash.
People must love custom splash screens lol
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
The only real advantage I see is that it can be returned to Locked status for warranty returns. I'm S-ON and never had any problems.
GalaxyS3Guy said:
Idk why ppl are so gung-ho about s=off for this phone... I thought I solved all those issues when I had madmaxx82 come over to this phone with smart flash.
People must love custom splash screens lol
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
The only real advantage is to those with the international model because they must have it to upgrade to ics But according to the OP profile he is on tmo so doesn't really need it
Sent from my HTC_Amaze_4G using xda premium
lamortcroix said:
Aparently J-bear no longer supports windows and I'm having trouble with getting Ubuntu to find my hard drive. Does anyone have the S off kit somewhere by chance?
Edit: got it thanks.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
I have that. I can't put it in here.
PM me.
---------- Post added at 10:11 PM ---------- Previous post was at 10:07 PM ----------
GalaxyS3Guy said:
Idk why ppl are so gung-ho about s=off for this phone... I thought I solved all those issues when I had madmaxx82 come over to this phone with smart flash.
People must love custom splash screens lol
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
I believe smartflash sometimes fails to flash properly ROMs. Also, restore ROM (boot.img particularly) doesn't work. Phone just gets stuck after reboot, so needed kernel re-flash. Also, without S-Off and SCID, for example, latest radio update can't be flashed. So, I believe that's why peeps looking for S-Off.
j-bear no longer supports windows? Hmm mind if I grab a copy myself?
Sent from my YP-G70 using xda app-developers app
There must be something that I'm missing with the Note 2 and Note 3.
Rooted stock, then went to Bonsai, then back to rooted stock.
I made a backup each time in TWRP. I tried restoring my backup of Bonsai tonight, but it fails. Tried reflashing the rom (same file I used last time), and it boot loops. Tried using the rooted stock backup, and it fails.
Tried reinstalling stock root rom, and it bootloops. Tried another rom, and it boot loops.
I wipe after every install and restore attemp, and wipe cache and dalvik after each.
I had the exact same issues on the note 2. Any suggestions or ideas? I'm ready to go back to HTC or something...
I still can't get my phone to boot....I also noticed that when in recovery I cannot mount usb storage....wtf
Downloaded the stock file to flash through odin and it's failing....whats the deal with these phones...
Is there anyone here who can help.......
When you say the stock file, do you mean the MJ4 tar file? If that doesn't work, you might try one of the older files and see if that works and then flash mj4 again.. Outside of trying that, not to sure. You might try sending that guy freeza a message, he seems to be the go to guy for this phone.
Sent from my SM-N900P using XDA Premium 4 mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:53 PM ----------
http://forum.xda-developers.com/showthread.php?t=2549035
Sent from my SM-N900P using XDA Premium 4 mobile app
tonyevo52 said:
When you say the stock file, do you mean the MJ4 tar file? If that doesn't work, you might try one of the older files and see if that works and then flash mj4 again.. Outside of trying that, not to sure. You might try sending that guy freeza a message, he seems to be the go to guy for this phone.
Sent from my SM-N900P using XDA Premium 4 mobile app
---------- Post added at 08:56 PM ---------- Previous post was at 08:53 PM ----------
http://forum.xda-developers.com/showthread.php?t=2549035
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He's more of the come hither type.
Sent from my SM-N900P using Xparent BlueTapatalk 2
eskion said:
There must be something that I'm missing with the Note 2 and Note 3.
Rooted stock, then went to Bonsai, then back to rooted stock.
I made a backup each time in TWRP. I tried restoring my backup of Bonsai tonight, but it fails. Tried reflashing the rom (same file I used last time), and it boot loops. Tried using the rooted stock backup, and it fails.
Tried reinstalling stock root rom, and it bootloops. Tried another rom, and it boot loops.
I wipe after every install and restore attemp, and wipe cache and dalvik after each.
I had the exact same issues on the note 2. Any suggestions or ideas? I'm ready to go back to HTC or something...
I still can't get my phone to boot....I also noticed that when in recovery I cannot mount usb storage....wtf
Downloaded the stock file to flash through odin and it's failing....whats the deal with these phones...
Click to expand...
Click to collapse
Try these methods:
http://forum.xda-developers.com/showthread.php?t=2550202
Sent from Sprint Galaxy Note 3 using Tapatalk
It turns out that TWRP did something with my efs backup and that caused the problems. I found a script that I flashed in recovery and now it's working again. Flashed back to bonsai but my lock screen isn't working and I don't have a power menu. Any suggestions or files that I would need to flash for this?
Sent from my SM-N900P using xda app-developers app
eskion said:
It turns out that TWRP did something with my efs backup and that caused the problems. I found a script that I flashed in recovery and now it's working again. Flashed back to bonsai but my lock screen isn't working and I don't have a power menu. Any suggestions or files that I would need to flash for this?
Sent from my SM-N900P using xda app-developers app
Click to expand...
Click to collapse
Try a diff rom
Sent from Sprint Galaxy Note 3 using Tapatalk
Ok, I'll try downloading one while I'm at work
Sent from my SM-N900P using xda app-developers app
Forgot to mention that I tried the odex stock rim in the forum as well. Same results
Sent from my SM-N900P using xda app-developers app
Tried the deodexed rom in the forum, and same issue. Did a wipe, install, and no lock screen, and when I hold the power to button for 2 seconds, the phone powers off
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
edit--
Just noticed my wifi is broke on this rom...Day is getting better and better
eskion said:
Tried the deodexed rom in the forum, and same issue. Did a wipe, install, and no lock screen, and when I hold the power to button for 2 seconds, the phone powers off
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
edit--
Just noticed my wifi is broke on this rom...Day is getting better and better
Click to expand...
Click to collapse
Sounds like factory mode triggered by efs problem. Search for this, I've seen posts to fix it temp/perm I'm 100% sure of this. Go look same fix will likely apply.
eskion said:
Tried the deodexed rom in the forum, and same issue. Did a wipe, install, and no lock screen, and when I hold the power to button for 2 seconds, the phone powers off
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
edit--
Just noticed my wifi is broke on this rom...Day is getting better and better
Click to expand...
Click to collapse
Did u fully wipe system, cache & delvic? Try the jelly bomb rom
Sent from Sprint Galaxy Note 3 using Tapatalk
insane209 said:
Try these methods:
http://forum.xda-developers.com/showthread.php?t=2550202
Sent from Sprint Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Trying this now. Will let you know
--edit--
Completed successfully in odin. Let's see what happens
eskion said:
Trying this now. Will let you know
Click to expand...
Click to collapse
Good luck
Sent from Sprint Galaxy Note 3 using Tapatalk
insane209 said:
Good luck
Sent from Sprint Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Looks like everything is working except wifi. Odd...
--edit--
Lockscreen isn't working again either, and no power menu
eskion said:
Looks like everything is working except wifi. Odd...
Click to expand...
Click to collapse
Its not sticking to a connection?
Sent from Sprint Galaxy Note 3 using Tapatalk
insane209 said:
Its not sticking to a connection?
Sent from Sprint Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Wifi won't turn on
eskion said:
Wifi won't turn on
Click to expand...
Click to collapse
Hmmm works fine on my phone...try just reinstalling the stock mj4 tar then
Sent from Sprint Galaxy Note 3 using Tapatalk
insane209 said:
Hmmm works fine on my phone...try just reinstalling the stock mj4 tar then
Sent from Sprint Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
That's the crazy part. That's what I did
eskion said:
That's the crazy part. That's what I did
Click to expand...
Click to collapse
Then try the jellybomb rom
Sent from Sprint Galaxy Note 3 using Tapatalk