I downloaded the Xperia Go Jelly Bean FTF but am unable to extract the system.sin and retrieve the system files. I followed this method but it did not work, is there another compression value I could use or another method?
Also I've tried that method on GB and ICS FTF's and it worked it is just this JB FTF which it does not work on.
Just open ftf file with winrar, extract sin files and then extract sin files using sin editor.
Sent from my ST25i using xda app-developers app
ShinOrochiX said:
I downloaded the Xperia Go Jelly Bean FTF but am unable to extract the system.sin and retrieve the system files. I followed this method but it did not work, is there another compression value I could use or another method?
Also I've tried that method on GB and ICS FTF's and it worked it is just this JB FTF which it does not work on.
Click to expand...
Click to collapse
can you give me the link for downloading xperia go JB FTF file ? plz..
i dont know from where to download.
Nakulkhanna said:
can you give me the link for downloading xperia go JB FTF file ? plz..
i dont know from where to download.
Click to expand...
Click to collapse
Here
http://forum.xda-developers.com/showthread.php?t=2249947
drsanket_xperia_u said:
Here
http://forum.xda-developers.com/showthread.php?t=2249947
Click to expand...
Click to collapse
thanks a lot buddy
ShinOrochiX said:
I downloaded the Xperia Go Jelly Bean FTF but am unable to extract the system.sin and retrieve the system files. I followed this method but it did not work, is there another compression value I could use or another method?
Also I've tried that method on GB and ICS FTF's and it worked it is just this JB FTF which it does not work on.
Click to expand...
Click to collapse
did you find the value then please tell me too
garvitdelhi said:
did you find the value then please tell me too
Click to expand...
Click to collapse
I didn't find a value but successfully extracted the ftf using the method on this thread. Refer to posts # 2,3 & 4.
ShinOrochiX said:
I downloaded the Xperia Go Jelly Bean FTF but am unable to extract the system.sin and retrieve the system files. I followed this method but it did not work, is there another compression value I could use or another method?
Also I've tried that method on GB and ICS FTF's and it worked it is just this JB FTF which it does not work on.
Click to expand...
Click to collapse
complete guide on how to extract the jb ftf is posted here, follow it to extract
Related
W8 Stock ROM 2.1.1.A.0.53
Download link: http://dl.dropbox.com/u/61155616/E16i_2.1.1.A.0.53_Sony Stock 2.1-update1.ftf (218 MB)
This is the original untouched stock firmware (E16i) directly extracted from binary blob from PCC using flash tool (not a nandroid backup).Maybe useful for flashing to original stock or as a base for new ROMs.
Hope this helps.
7ziped by B.Jay http://www.mediafire.com/?7kra2c1160vuhf2 (103 MB)
aji_s said:
W8 Stock ROM 2.1.1.A.0.53
Download link: http://dl.dropbox.com/u/61155616/E16i_2.1.1.A.0.53_Sony Stock 2.1-update1.ftf
This is the original untouched stock firmware (E16i) directly extracted from binary blob from PCC using flash tool (not a nandroid backup).Maybe useful for flashing to original stock or as a base for new ROMs.
Hope this helps.
Click to expand...
Click to collapse
Thanks! i will flash it to my X8!
thanks pal.. i have pressed tks button for u.. i was looking every where for this
hey can you pls tel me how to flash this stock rom and stock kernel using Flash tool?? pls PM me..
Hmm how did you do that? and what region is this?
does it work on X8?
molimo said:
does it work on X8?
Click to expand...
Click to collapse
Yes, i guess so
molimo said:
does it work on X8?
Click to expand...
Click to collapse
TimeWasterNL said:
Yes, i guess so
Click to expand...
Click to collapse
it works i tried it out
amnher said:
Hmm how did you do that? and what region is this?
Click to expand...
Click to collapse
I am from India.I extracted ROM from PCC update.
aji_s said:
I am from India.I extracted ROM from PCC update.
Click to expand...
Click to collapse
how you extracted it?
ghost9685 said:
thanks pal.. i have pressed tks button for u.. i was looking every where for this
hey can you pls tel me how to flash this stock rom and stock kernel using Flash tool?? pls PM me..
Click to expand...
Click to collapse
Hi Ghost,Put the file in the firmware folder (C:\Flashtool\firmwares) of Flash tool then enter Flashmode.The firmware will be autodetected and flash it.enjoy
c2t2l4n said:
how you extracted it?
Click to expand...
Click to collapse
When updating using PCC.The firmware will be stored in db folder of PCC .(C:\ProgramData\Sony Ericsson\Update Engine\db\).
Update /Repair your phone using PCC. Then search for blob_fs folder in db folder.There you can find 3 files with name starting FILE_. Then start Flash tool.In
Advanced menu select "Decrypt Files'. Point blob_fs as source folder and select the "FILE_" files.After decrypting select "create bundle" from Advanced menu.After completion you can find ftf file in firmwares folder.hope this helps
aji_s said:
When updating using PCC.The firmware will be stored in db folder of PCC .(C:\ProgramData\Sony Ericsson\Update Engine\db\).
Update /Repair your phone using PCC. Then search for blob_fs folder in db folder.There you can find 3 files with name starting FILE_. Then start Flash tool.In
Advanced menu select "Decrypt Files'. Point blob_fs as source folder and select the "FILE_" files.After decrypting select "create bundle" from Advanced menu.After completion you can find ftf file in firmwares folder.hope this helps
Click to expand...
Click to collapse
thx it works but when i try downloading app from market with the W8 Rom phone reboots
edit: i wouldn't flash the Rom now i can't flash back to 2.1 using PCC it only says for you Phone no Software available (tried flashing X8 and W8) PCC says Sony /Sony Ericsson Phone it doesn't detect X8 just Phone
Take back the original x8 2.1 kernel, then I think you can flash it
kapocszoltan said:
Take back the original x8 2.1 kernel, then I think you can flash it
Click to expand...
Click to collapse
doesn't work, i flashed 2.1 kernel and tried installing Rom with PCC...
im downloading 2.1 tft Stock Rom i will flash it with Flashtool and after i try
PCC again. But download takes few hours connection (not mine) is very slow and there are many 2.1 stock rom tft links offline only 1 i found is working (2.1.1.A.0.0.6) and it takes long
can someone use this guide to make X8 Stock Rom?
3g doesn't work for me!!!! WHY?
lucasiumej said:
3g doesn't work for me!!!! WHY?
Click to expand...
Click to collapse
maybe the W8 Version is not fully compactible with X8 and i can't download apps with W8 Rom getting random reboots and i can't flash back because PCC says Update-Server not available atm
Edit: Reparing Phone works again after i flashed 2.1 ftf and rebootet PC (i think rebooting PC worked for me)
Thats sucks, then I will try it later if it won't be dangerous.
Anyway, you can't flash with PCC. Have you tried with seus?
kapocszoltan said:
Thats sucks, then I will try it later if it won't be dangerous.
Anyway, you can't flash with PCC. Have you tried with seus?
Click to expand...
Click to collapse
no but i do atm seems it works with SEUS and PPC works again too as i installed Stock Rom ftf and rebootet PC
i found it out and it was before 2.1.1.C.0.0 (i have found download link but im not sure what the newest version is)
found out that 2.1.1.C.0.0 should be newer than the 2.1.1.A.0.6 (should)
aji_s said:
When updating using PCC.The firmware will be stored in db folder of PCC .(C:\ProgramData\Sony Ericsson\Update Engine\db\).
Update /Repair your phone using PCC. Then search for blob_fs folder in db folder.There you can find 3 files with name starting FILE_. Then start Flash tool.In
Advanced menu select "Decrypt Files'. Point blob_fs as source folder and select the "FILE_" files.After decrypting select "create bundle" from Advanced menu.After completion you can find ftf file in firmwares folder.hope this helps
Click to expand...
Click to collapse
i'll try this one buddy
Sent from my E16i using XDA
What's the difference beetween this 2.1.1.A.0.53 and the W8 2.1.1.A.0.46?
Hi,
First of i want to say that i am not from Ray section, i own a Xperia S, but my sister has Xperia Ray, i upgraded her phone from GB. to ICS (4.1.B.0.587) but didn't know how to root it, after searching i found this on Arc section. i tried it and seems to work on Ray too. So here it goes. And i take no credit for this work, all credit goes to the makers.. And i don't know if this was posted here before but if so MODs. can delete it.
This tutorial is for 4.1.B.0.587 only!
1) flash this via flashtool : ST18i_4.1.A.0.562_kernel.ftf http://www.mediafire.com/?gbs29dw3tzx765k (thanks to zstoichev)
OBS : you might get errors after the reboot, don't worry, this is normal and step 3 will fix that.
2) Root your Ray with DooMLoRD's tool:
Unknown Sources and Debugging must be checked in phone settings. Before you open the .bat file.
http://forum.xda-developers.com/showthread.php?t=1601038
3) Flash the 4.1.B.0.587 kernel via. flashtool
http://www.mediafire.com/?1pthkluxcsjkp5k
4) Your done..
Credits to : DoomLoRD, OverLo4d ( for his tutorial in Arc/S section) and last but not least zstoichev)
Thank you. I assume, it's also ok if the Xperia Ray is on stock ICS 4.0.4_4.1.B.0.587 already before starting your guide?
mirkuma said:
Thank you. I assume, it's also ok if the Xperia Ray is on stock ICS 4.0.4_4.1.B.0.587 already before starting your guide?
Click to expand...
Click to collapse
yea, it is ok.
Can you please upload just striped-down verisions of both kernels 4.0.3 (562) & 4.0.4 (587) (only *.sin files packed in ftf file)? In this case there is no need to DL 200+MB files wor me (already on ICS 4.0.4_4.1.B.0.587) so I only need kernel files in ftf not the whole ROM).
Thank you!
mirkuma said:
Can you please upload just striped-down verisions of both kernels 4.0.3 (562) & 4.0.4 (587) (only *.sin files packed in ftf file)? In this case there is no need to DL 200+MB files wor me (already on ICS 4.0.4_4.1.B.0.587) so I only need kernel files in ftf not the whole ROM).
Thank you!
Click to expand...
Click to collapse
Sure why not, uploading. So it will be up in a sec.
Here : http://www.mediafire.com/?1pthkluxcsjkp5k
Anicane said:
Sure why not, uploading. So it will be up in a sec.
Here : http://www.mediafire.com/?1pthkluxcsjkp5k
Click to expand...
Click to collapse
Great, thank you very much! Will upgrade my Ray to .587 & root it tonight!
EDIT: It seems, that there is only one version of kernel in ftf file, which one is it? 4.0.4 (.587)?
mirkuma said:
Great, thank you very much! Will upgrade my Ray to .587 & root it tonight!
EDIT: It seems, that there is only one version of kernel in ftf file, which one is it? 4.0.4 (.587)?
Click to expand...
Click to collapse
I think if you read the first post, you will see that i have posted two links, with instruction. The first one is (.562 kernal only), and the second one is (587 kernal only)... Hope that helps.
Anicane said:
I think if you read the first post, you will see that i have posted two links, with instruction. The first one is (.562 kernal only), and the second one is (587 kernal only)... Hope that helps.
Click to expand...
Click to collapse
Ups, I didn't noticed. I could swear that one file of tft files was ower 200+MB not the striped-one.
Rooting now...
mirkuma said:
Ups, I didn't noticed. I could swear that one file of tft files was ower 200+MB not the striped-one.
Rooting now...
Click to expand...
Click to collapse
Yes it was, but only one of them, the new FW, and i uploaded only the kernal afterwards, when you asked.
Just to add another info to your guide:
Unknown Sources and Debugging and Mass Storage Mode (under Settings/Xperia/Connectivity) must be checked in phone settings. Before you open the .bat file...
Click to expand...
Click to collapse
Thank you, I have just rooted my Ray successfully.
Anicane said:
Hi,
First of i want to say that i am not from Ray section, i own a Xperia S, but my sister has Xperia Ray, i upgraded her phone from GB. to ICS (4.1.B.0.587) but didn't know how to root it, after searching i found this on Arc section. i tried it and seems to work on Ray too. So here it goes. And i take no credit for this work, all credit goes to the makers.. And i don't know if this was posted here before but if so MODs. can delete it.
This tutorial is for 4.1.B.0.587 only!
1) flash this via flashtool : ST18i_4.1.A.0.562_kernel.ftf http://www.mediafire.com/?gbs29dw3tzx765k (thanks to zstoichev)
OBS : you might get errors after the reboot, don't worry, this is normal and step 3 will fix that.
2) Root your Ray with DooMLoRD's tool:
Unknown Sources and Debugging must be checked in phone settings. Before you open the .bat file.
http://forum.xda-developers.com/showthread.php?t=1601038
3) Flash the 4.1.B.0.587 kernel via. flashtool
http://www.mediafire.com/?1pthkluxcsjkp5k
4) Your done..
Credits to : DoomLoRD, OverLo4d ( for his tutorial in Arc/S section) and last but not least zstoichev)
Click to expand...
Click to collapse
I am using JJ's Hybrid ROM 3.2 for locked bootloaders,. its already rooted,. will this method work for if like say I just skip step 1-2 and flash to the new 4.1.B.0.587 kernel ?
kenethic said:
I am using JJ's Hybrid ROM 3.2 for locked bootloaders,. its already rooted,. will this method work for if like say I just skip step 1-2 and flash to the new 4.1.B.0.587 kernel ?
Click to expand...
Click to collapse
yes you can. flash only kernel.sin from .ftf file wont remove your superuser.apk
sirkay said:
yes you can. flash only kernel.sin from .ftf file wont remove your superuser.apk
Click to expand...
Click to collapse
Thanks! worked like charm!
Can i use this method if i have bootloader unlocked ?
I have tried to root the phone, root step worked like a charm and the phone started like always.
But after flashing the stock kernel (step 3) when I switch on the phone it show Sony and then black.
I have tried to flash the 562 kernel but I have the same black screen. What can I do?
shshmhn said:
i cannot root my ray
no root methods working
see attachment ss
Click to expand...
Click to collapse
Be sure you have installed ADB drivers.. Also be sure to ON USB Debugging and be in MSC..
I can't root my xperia ray.
The flashtool is work for x10 not for my xperia ray.
Sent from my ST18i using xda app-developers app
Bro, Getting error as following when trying to flash ST18i_4.1.A.0.562_kernel.ftf file. Pls let me know who to resolve the issue.
04/053/2012 11:53:28 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
Could not flash 587 kernel
Hi, I've run into a problem that's just been driving me crazy.
I've essentially been able to flash into build 562, and then run the root (which works), but when I try to flash to the 587 kernel, I keep checking my version and it always says 4.0.3 build 562 (paraphrasing here).
I've converted the 587 kernel.sin file into an ftf and ran it, but still it does not work.
Can I get some help please?
I'm probably newbing out on something, but everywhere I search people keep saying "flash to 587 kernel" but there was barely any information on what to do with the .sin files after I got them. I just want to confirm that I simply bundle them up using flashtool and flash that file right? but that doesnt work.
Phone is xperia ray st18a, bootloader is locked on Rogers.
Thanks for any help.
I also wanted to add, for flashing the kernel, i've tried using fastboot(adb) but could not select the kernel yet.
My attempts are flashing with a full 587 build but excluding everything but the kernel, and not wiping any data, I am still stuck at 562.
xperia ray
hi.... i hv rooted my device ..... running on ics... but there are no changes on my phone at all....the settings to control cpu is not availaible... help
Need help guys!
I deleted my phones (ST15i ICS 4.1.B.0.587) system folder.
now,when i turn my phone on,it's showing only the SONY logo but nothing else.No blue or green LED!
is there any hope for me(phone) to get it back to life,can we be Dr.Frankenstein or should i hang myself up?
The bootloader is locked.
HELP ME PLEASE!!!!!!!
arvarobert said:
Need help guys!
I deleted my phones (ST15i ICS 4.1.B.0.587) system folder.
now,when i turn my phone on,it's showing only the SONY logo but nothing else.No blue or green LED!
is there any hope for me(phone) to get it back to life,can we be Dr.Frankenstein or should i hang myself up?
The bootloader is locked.
HELP ME PLEASE!!!!!!!
Click to expand...
Click to collapse
Hmmm...use SEUS to re-flash back your stock roms....
is SEUS working on PC running Linux OS?
arvarobert said:
is SEUS working on PC running Linux OS?
Click to expand...
Click to collapse
Nope....I don't think so.....
I think flashtool might work...just download the ftf file and flash it using flashtool.
Press THANKS if I helped,
Regards,
Abhinav
Sent from my Xperia Mini Pro using Tapatalk 2
how to flash with Flashtool when no blue led,and which ftf files do i need to download and where?
i need a guide.
Here you can find the guide of flashing the stock firmwares...in the same thread the ftf files of stock firmwares are given...
Press THANKS if I helped,
Regards,
Abhinav
Sent from my Xperia Mini Pro using Tapatalk 2
but i have 4.1.B.0.587 kernel.
in this tutorial is only 4.1.B.0.431 Stock Firmware.
i'm downloading 4.1.B.0.587 Stock Firmware now,so, i need only flash this FW and that's it or i have to flash kernel again?
Please help my guys!
arvarobert said:
but i have 4.1.B.0.587 kernel.
in this tutorial is only 4.1.B.0.431 Stock Firmware.
i'm downloading 4.1.B.0.587 Stock Firmware now,so, i need only flash this FW and that's it or i have to flash kernel again?
Please help my guys!
Click to expand...
Click to collapse
You have to flash the entire ftf file of .587 just as you would flash the .431 ftf. No changes at all. Also, kernel does not contain the system folder(ROM) but contains only the ramdisk and zImage binary. The system.sin file in your ftf package actually contains the "system" folder. Anyway, it is just safer to flash the entire package. Good luck!
abcdjdj said:
You have to flash the entire ftf file of .587 just as you would flash the .431 ftf. No changes at all. Also, kernel does not contain the system folder(ROM) but contains only the ramdisk and zImage binary. The system.sin file in your ftf package actually contains the "system" folder. Anyway, it is just safer to flash the entire package. Good luck!
Click to expand...
Click to collapse
that means,i need to flash first the kernel and then the FW,correct?
but my phone has already the kernel inside,i can turn phone on but stocked on bootlogo and have to remove battery.
So...:crying:
arvarobert said:
that means,i need to flash first the kernel and then the FW,correct?
but my phone has already the kernel inside,i can turn phone on but stocked on bootlogo and have to remove battery.
So...:crying:
Click to expand...
Click to collapse
Just flash the ftf :banghead:and your phone will be fine
Just flash the ftf and that's all nothing more to do :banghead:!!!!!!!!!!
Sent from my Xperia Mini Pro using Tapatalk 2
arvarobert said:
that means,i need to flash first the kernel and then the FW,correct?
but my phone has already the kernel inside,i can turn phone on but stocked on bootlogo and have to remove battery.
So...:crying:
Click to expand...
Click to collapse
Just place your ftf in firmwares folder, start flashtool and select the ftf from the list and click the flash button! Don't uncheck any options there and press flash. Then connect your phone in download mode and done! Don't worry about the kernel and all that stuff. Flashing a stock ftf should take care of all the problems in your phone.
Press thanks if I helped.:laugh:
Thanks guys,i've done it and it's working:laugh:!!!!!!
Thanks again!:fingers-crossed::victory:
Hey guys, I can't find any stock ROM for xperia go .zip file... can anyone provide it to me???
I need a flashable .zip file, not ftf.....
Sent from my C6603 using xda app-developers app
[STOCK][FIRMWARE][ICS] Sony Xperia Go ST27i FTF
[STOCK][FIRMWARE][GB] Sony Xperia Go 6.0.B.3.184.ftf UA, RUS
He asked flashable zip file not .ft file bro...thanks nyways
Sent from my Xperia Sola using xda premium
so tell me how to make one and I will try do it for u
Correct me if I'm wrong, but if you have a locked BL and you're rooted, if you install a Locked BL CWM, is other not the option in Advanced- Create firmware zip? Can someone do that for him?
"The answer is most likely... probably not."
-Reality
Strike_Riku said:
Correct me if I'm wrong, but if you have a locked BL and you're rooted, if you install a Locked BL CWM, is other not the option in Advanced- Create firmware zip? Can someone do that for him?
"The answer is most likely... probably not."
-Reality
Click to expand...
Click to collapse
could be bootloader locked by this? or u need pure stock untuched one
hanys23 said:
could be bootloader locked by this? or u need pure stock untuched one
Click to expand...
Click to collapse
He needs untouched.
"The answer is most likely... probably not."
-Reality
Strike_Riku said:
He needs untouched.
"The answer is most likely... probably not."
-Reality
Click to expand...
Click to collapse
In this case Im out of the game :crying:
Im so sorry but I cant help
I also faced that problem a while ago, as a stock update.zip would be very useful. Flashing a file via cwm is much more faster than booting up flashtool and flash a ftf file. I was able to extract the firmware files from a ftf file with flashtool but I just didn't know how to pack them into an update.zip. My main problem is that I didn't know how to set the permissions correctly.
EDIT: Ah. I think I found something out. This website sounds good. I think that is what you are looking for. http://www.xda-developers.com/android/easily-extract-ics-system-files-from-sony-xperia-ftf-files/
EDIT2: To build an update.zip package this could work. http://www.xda-developers.com/android/extract-ftf-files-and-turn-them-into-flashable-zips/
EDIT3: And with this tool you can unpack the ext4 files of a xu ics ftf file. http://sourceforge.net/projects/androidicsjbext/files/20130408/ext4_unpacker_exe.zip/download
EDIT4: I sum up the extraction process:
0. Get a ftf file(e.g. this generic ics ftf http://forum.xda-developers.com/showthread.php?t=2075526)
1. Get flashtool, 7zip and the ext4_unpacker(see above)
2. Open firmware ftf file with 7zip and extract system.sin
3. Flashtool->Tools->Sin Editor-> Select system.sin file. -> Dump data
4. Open extracted system.ext4 file with the ext4_unpacker and extract system files to a folder called system/.
Now anyone has to figure out how to create an update.zip file. I think that's the harder part.
hanys23 said:
[STOCK][FIRMWARE][ICS] Sony Xperia Go ST27i FTF
[STOCK][FIRMWARE][GB] Sony Xperia Go 6.0.B.3.184.ftf UA, RUS
Click to expand...
Click to collapse
This came out in man. Format ,
How do i get it to ftf format?
hey guys i need stock ICS FTF file for xperia go... which could work fine in india.
i did find some FTF files but they all seems to have some issues. people are complaining about lag, wifi problems and no 3G...
so if any1 could provide me an ICS FTF which would work fine...
plus i also need help in flashing the FTF file via Flashtool... i have never flashed any FTF before, i tried searching on youtube for a tutorial but couldn't find anything... so if any1 could post a link of tutorial or a guide on how to flash the FTF file would be great.
P.S- i have the flashtool from binary & androxyde but i do need the ICS FTF file for xperia Go which works fine in India or if there is universal FTF file which works fine everywhere...
thanks in advance....
Edit...
am trying to go back to ICS from JB so that i can root.
Here you GO. (the pun intended.)
http://forum.xda-developers.com/showthread.php?t=2112716
Thanks to tecomi.
As for instructions to use flashtool:-
*do not connect phone*
>Open flashtool
>Open the folder to which you have downloaded the ftf.
>Simply drag the ftf into flashtool
>Just click ok
>Follow instructions which show up.
apex_predator619 said:
Here you GO. (the pun intended.)
http://forum.xda-developers.com/showthread.php?t=2112716
Thanks to tecomi.
As for instructions to use flashtool:-
*do not connect phone*
>Open flashtool
>Open the folder to which you have downloaded the ftf.
>Simply drag the ftf into flashtool
>Just click ok
>Follow instructions which show up.
Click to expand...
Click to collapse
thanks a lot brother... made my day...
i hope this FTF wont have any issues...
thanks again... (hitting thanks button for u)