I have an HTC ONE X+ and it will not connect to the computer nothing happens, it will only charge.
I have tried to connect it with and without debugging on. I have tried connecting it after uninstalling sync manager and even reinstalling sync manager to the latest version and it still will not connect, I get no acknowledgement from the PC or PHONE (except for the phone charging). I have connected it to 2 other computers and still no response, I have tried another USB cord and still nothing. I did connect my other HOX and it connects just fine but my HOX+ will not.
Any suggestions/solutions?
Drivers?
Install this drivers from Hasoon's Toolkit Thread and try it again.
You may also want to uninstall the HOX drivers as they maybe causing a conflct and remember to have the screen unlocked while connecting (helps my device, no idea why).
JAy3k1 said:
You may also want to uninstall the HOX drivers as they maybe causing a conflct and remember to have the screen unlocked while connecting (helps my device, no idea why).
Click to expand...
Click to collapse
I figured out the "port" on my was bad. Got a replacement phone under warranty and all is good.
Related
Okay all. Usually I don't post and just lurk around here to find the answers to my issue. This time after reading 300 posts about Activesync and the TP my problem is still not resolved.
Up until last Friday I have been able to sync the TP with my computer running WinXP via the USB connection. I sync with my exchange server OTA but use the USB connection for file transfers. My computer won't recognize that the TP is even plugged into the USB now. It still charges, but doesn't do anything else. I've rebooted the machine and TP, reinstalled Activesync on computer, unchecked the "enable advanced network functionality" box, changed USB cords, verified that I have the correct three repllog.exe values in my notification queue, and even hard reset the TP. Still no luck. I would think that it's something to do with the computer except that I plugged my Mogul in to check and it synced instantly.
Does anyone have any more ideas why the TP would not be registering as connected? You all are amazing when it comes to stuff like this, so any help would be greatly appreciated.
Thanks in advance.
uninstall the Windows Mobile-based Device from the
network adapters section of Device manager on the PC.
control panel -> system -> hardware tab -> device manager button
restart pc and plug in the phone via usb and select active sync.
also the reason this may work in your case is i have had to do this for a friend.
windows installed the general rdnis driver however each device has a different
instance installed and thus the one device can have a corrupted driver yet the
other works perfect.
i see that u used another usb cable, cuz once it happened to me that the cable would charge but vista wouldn't recognize my TP "unrecognized USB device" , until i changed my usb cable!
Well I finally just went to a friend at the Sprint store and he swapped me for another TP. The new one works perfectly with the same setup that the other wouldn't. I can only guess that somehow the USB connection on my phone failed somehow. Just wanted to post this in case anyone else may have this issue in the future. Thanks for the responses.
This problem has happened on a friends, as well as just happening to mine (about 20 minutes ago). The usual fix which seems to clear it up:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
The same thing happened with my phone.... I took it to the Sprint store and they even tried a hard reset. It worked once after that then again it wouldn't sync. So they just replaced mine.... It was like you said.... some malfunction in the phone itself.
Hope HTC can figure out why this is happening.
Touch pro not sync
I can sync with my Vista Laptop and my friends xp machine but not to my xp desktop. I have tried many different cables. Each time I try something new, I toggle the "enable faster data synchronation box on USB to PC on try to sync then off then try to sync.
I have tried to delete all the usb drivers and rebooted to let the computer put in a new set.
I have tried to delete all the non running programs in my device manager using view hidden files.....
I have uninstalled active sync and then reinstalled it.
I have hard reset my phone a few times to no avail.
I went and bought a blue tooth adapter so I could sync using blue tooth and this computer does not do a good job of recognizing the adapter, but it did recognize it the first time but, could not pair the two. my blue tooth adapter is now coming up as a an unknown device
when i hook up the phone this is the message i get:
USB not Recognized,
One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message....
Any ideas?
Thanks,
Kent
MCW junior member THANKS....
thanks so much, this worked for me I could not sync my tasks or calendar, once I did what you said here I did get and Error Code 67..then cannot connect saying remote party has ended this connection...whatever that means...but anyway it proceeded to start automatically resynching and walla..all of sudden my tasks and calendar were on my computer ....first time I was ever on this forum ....I shall continue reading and learning here...so appreciate your help...I love my HTC Touch Pro and have just figured out how to connect to my big screen tv with only an MP3 or the like cable...works beautifully...except picture on tv is not the clearest...I will work on perfecting that next if it is possible...
Then I want to figure out how to get the phone connected to my computer screen, just like I did to my TV...then your phone acts as a controller...it's so cool!!
Michele S
Ok I just found a solution for this, at least under Vista.
Click Start > Settings > Connections (tab)
Choose USB to PC
Once I removed the check mark next to "Enable advanced Network functionality" and clicked OK, my PC immediately saw my TP.
Hope this helps someone.
so what does the faster syc option do?
Ok so I searched the internet and found the advice to turn off the faster sync option on the phone.
After trying everything else I figured what the heck..
So it worked.
(btw windows adds a dif driver rather then the window-mobile baised device driver... )
So what does this option do? What does it point to being the problem on the computer?
Thanks,
HA>!
dashrender said:
ok i just found a solution for this, at least under vista.
Click start > settings > connections (tab)
choose usb to pc
once i removed the check mark next to "enable advanced network functionality" and clicked ok, my pc immediately saw my tp.
Hope this helps someone.
Click to expand...
Click to collapse
yeah i was having the same problem...my cpu would just recognize my phone as a mass storage device... Read your solution. And it worked... Damn i feel like a moron should have checked. Thanks!
I am having the same problem except the enable advanced network functionality option is checked and grayed out so it can't be unchecked.
I am running a 6.5 rom...
Any suggestions?
Solution solved
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
tjrmoney said:
If you go to Settings->Connections->USB to PC and uncheck Enable faster data synchronization.
You will notice below that it will say "(Clear this check box if ActiveSync does not recognize the device)"
Once I did this it worked perfect.
Click to expand...
Click to collapse
Think of this step as telling your tp to quick boot/sync if nothing between the device and the reciving pc has changed (ie: hardware, software etc.
Enables faster syncing and quicker connection and authentication between pc and WM device. Reason for unchecking this to make it work?, by hard-reseting or changing specfic phone information you've reset specfic settings that are registerd with your pc.
i was having this problem with my sprint tp2 and tried it and worked. wish i would of learned if before reseting my computer and losing some windows i had open and the hard reset on my phone and losing all my contacts now i gotta go back to sprint store to get them again.
Works on the Touch2
I had this problem, which was driving me nuts especially as it was intermittent. I found Dashrender's advice and followed it except for turning off "Enable faster data synchronisation". Brilliant, works perfectly, thanks.
But what are HTC doing putting something in the software that fouls things up?
I knew i wasnt loosing my mind!
I have been workn on phones for a while. And have just been freakn about these same Issues Sony vio with 64bit vista. Thanks for all the tips. only took 6 hrs of pain to figure it out myself.
I have a similar problem now with my USB to PC . i have used this usb cable for many flashes but now when I plug it in, my computer doesnt recognize the usb device. also TV-Out pops up on my phone too. what is that all about? i dunno what to do
just found this thread searching for why my tp2 wouldn't sync. somehow under usb to pc i had it set to disk drive instead of active sync. checked it and works like a charm, can even see it in my computer now.
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
might be the cable that you're using. i used before a cable that is not the original and the same thing happened to me, i.e. pc cannot recognize device.
Try Settings-->Other-->USB To Pc-->UNCHECK (enable faster data sync) this should help...
cable : original came with the phone (used to work up until b4 yesterday) also tried another micro usb cable that came with me N900 but still nothing.
I did the un-check "enable faster sync" still nothing
Did soft reset, hard reset using volume keys, and factory reset from phone setting itself. still nothing.. the phone charges.. but no data transfer.. its something to do with the phone because i tried multiple PC's the phone doesn't bring up the connection type option page
Epiclipto said:
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
Click to expand...
Click to collapse
Altho u have tried with diff PCs,try reinstalling MS Activesync on one PC.
did that too
when you make/recieve a call, does the loudspeaker come on?
nope everything is normal except no data transfer when connected to usb...
Epiclipto said:
did that too
Click to expand...
Click to collapse
Now pls chek whether USB2 is enabled in your PC Bios...
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Epiclipto said:
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Click to expand...
Click to collapse
No harm in checking.Infact i faced similar issue once and the USB2 was disabled.It took me an entire week to diagnose the problem.These PCs have got a mind of their own and do mischievous things on their own without our knowledge.
But since its not working on multiple PCs,i am not sure.We'll hav 2 wait 4 a solution i guess...
hmmmm.. would a full system format and re-install be possible? and would it fix it? (talking bout on the phone)
HELP, HELP
SAME PROBLEM WITH HTC2 T0MOBILE
even on the boot loader screen, it charges but no USB stuck on serial.
even when on sleep mode and plug the cable orange led is on but it didn't wake up for choose (active syn or stoeag memory)
PLEASE HELP
i can do nothing, HSPL or rom upgrade
the cable and the USB drivers are tested more than 100 times
Most horror problems I had with the USB sync have been down to not having the latest version fo Activesync from microsoft. Uninstall the old version thwen reboot - now download the 4.5 version which I think is the newest and last version they made (unless im out of date) and then reboot the machine, then connect up the phone - but not immediately after the machine has booted wait a couple on mins, Windows takes longer than it often appears to be ready to go. One your hard drive led flashing light has settled down it is probably time to try. Then see if it finds all the devices in your phone.
If it doesnt go into the control panel and double click system, hardware tab, then select device manager and see if there are any devices with a yellow sign with a "!" in them. If there are delete them and then unplug the phone and plug it back in again. It might get past some stuck things. If it doesnt see anything new on device manager theres a menu at the top and look for "scan for hardware changes" this gives teh device manager another look at what its got connected.
If that fails open up the USB section under in device manager - its got a little plus next to it, press that plus and it open up all the names of chips you have for your USB control on the pc's motherboard. Write down the numbers and go and get the correct up to date drivers for that type of USB and install them. Then try the process again. Sometimes deleting the USB drivers and just doing a "scan for hardware changes" again, will reset the USB drivers and start things working, however it can get tricky if your using USB mouse and Keyboard to select anything if you delete the USB, because thats what the KM/mouse relies on to control teh machine, so have a PS2 mouse plugged in if you can. If that fails I would suggest reinstalling windows as its probably knackered. It amazing how things start to work wonderfully on a fresh copy of windows.
I have been where you are! And tried every suggestion that was given here. It all came down to the cord. I actually went through 3 different cords before I found one that worked and found that by accident. I bought an external drive and that cord works. For whatever reason, that is the only cord that now works for me. I only use it for data transfers. i use the other cords for charging.
Delete
Are you getting "usb device not recognized" from your computer?
You've installed the samsung drivers?
Was it working at a given point in time and now it doesn't work all of a sudden?
I had a similar issue this week where i got "usb device not recognized" from my computer everytime i plugged in the device. I thought i had not installed the samsung mobile drivers properly, or my usb drivers on my PC was messed up, etc etc.
It turned out that my USB charging cable was the issue. It charged my phone fine but did not let me connect it to Odin or even transfer files.
So my suggestion is to try to find someone else's cable and give it a shot.
I used an AT&T captivate cable from a coworker and that's how i found out it was my cable.
Delete
where do i go to uninstall? i have a vibrant and stared getting this issue today
Alanrocks15 said:
where do i go to uninstall? i have a vibrant and stared getting this issue today
Click to expand...
Click to collapse
from desktop, windows button, in search box just above button type device manager, should be at the top of the windows pop up, clock that, go down to usb controllers, click the plus sign box. the rest was explained above.
USB fix
So I had the same problem. A new oem cable solved it. don't fight too long with this problem just get a new cable.
Today I deleted some programs off my SGS2 that were in the list in the SGS2 General Forum. My phone was able to connect to the PC before that. After I uninstalled the applications on my phone, it no longer tries to talk to my computer. I have reinstalled the drivers, restarted both my computer and phone, and still nothing. I am worried it was something I uninstalled but I doubt it. I was quite careful removing the programs using Titanium Backup and they were completely unrelated in my opinion. I have a feeling it is only coincidental.
Anyhow can you please help me troubleshoot what has happened? Thanks.
Perhaps it wasn't related. I figured out how to do it with USB debugging ticked. I never had to do that before. Originally it would connect automatically with USB debugging unticked. Now it only connects with USB debugging ticked and after I say that it is 'OK' pretty much.
Still, if anyone can shed some light on what I may have uninstalled let me know. Thanks.
may not apply to you since im guessing you tried it both times on the same comp with the same OS. i find that kies hates 64 bit OS. it just wouldn't connect on my desktop running win 7 ultimate 64bit but connects just fine on my laptop running win 7 enterprise 32bit. anyway... i usually have debugging mode on anyway, much easier for me to access the phone and sd card using explorer instead of stupid kies. kies i only use for firmware updates or atleast until i've rooted this thing.
Sorry I should have mentioned that I am using Windows 7 Professional 64-bit. Thanks, shabs52. Good to know it could be my OS that is fumbling. I would have to agree as well, Kies stinks. I can't wait until I can get a stock OS without any crapware.
Anyhow it is strange how it worked for awhile and just stopped, but debug mode is better anyway.
Win 7 x64 Kies failed always .
Wiped drive brand new Win 7 x64 install Kies no problems = bad driver install or conflicts on original setup .
jje
I'm having this problem too
Despite my Win7 64bits, Kies always connected automatically, both with SGS2 and my previous SGS. Yesterday my SGS2 started to behave strange: when I plug the USB cable it doesn't recognizes automatically (takes a few seconds), and only starts charging the battery, but the data link is not stablished (Kies won't even recognize there is a device connected). When I remove the USB cable the charging indicator continues to show as if it still was connected (again, for a few seconds). The same with the power cord. Since the symptoms were the same in my notebook (also Win 7 64) I tried it on a Win XP 32 - same thing (different USB cables). This makes me think the problem is with the device itself. Anyone have seen this?
Try deleting the drivers on your pc for samsung usb while the phone is unplugged. Then plug back the phone and windows 7 should automatically search and install the required files...worked for me with w7 64
I already did that, but the problem persists. Today some new symptoms "arrived", which led me to this other thread (http://forum.xda-developers.com/showthread.php?t=1151863). The phone eventually enters car mode, or beeps and shows the charging indicator (even though it's not plugged). Weird. Will take to service tomorrow.
Im having this same problem with my epic touch. Was just wondering if anyone found a way to fix it.
My computer is having a problem recognizing my HTC Vivid as anything besides an Unknown USB Device. Sometimes it will come up as an Android Phone and list the normal drivers but that goes away and turns into an Unknown USB Device with no drivers in about 10 seconds. I've tried mounting it to Disk Drive, HTC Sync, Internet Pass-Through, and Sync Manager. Not sure what to do at this point, I want to update my phone.
Systehm said:
My computer is having a problem recognizing my HTC Vivid as anything besides an Unknown USB Device. Sometimes it will come up as an Android Phone and list the normal drivers but that goes away and turns into an Unknown USB Device with no drivers in about 10 seconds. I've tried mounting it to Disk Drive, HTC Sync, Internet Pass-Through, and Sync Manager. Not sure what to do at this point, I want to update my phone.
Click to expand...
Click to collapse
I'm having the same issue as you, just started tonight (trying to put the 1/15/2014 build of CM 11 on it), and so far haven't come across anything useful yet. I do recommend going to the HTC vivid forums and asking for help there, as you're more likely to get a response.
And sorry for reviving an old thread.