Hi
Everyone from afternoon my xt912 acting weirdly im tried to take picture and then camera interface stuck at preview..then im rebooted same issue camera stuck preview ...then im booted into stock 4.1.2 same error photo focused but cam flash turned and camera stuck flash didnt turn off.so rebooted again same issue noe getting camera unable to intialize.dunno why whats going on with my razr im thinking to flash will it solve or not? Need ur suggestion thanks And Regards HARSHA
Sent from my XT925 using xda app-developers app
L7iharsha said:
Hi
Everyone from afternoon my xt912 acting weirdly im tried to take picture and then camera interface stuck at preview..then im rebooted same issue camera stuck preview ...then im booted into stock 4.1.2 same error photo focused but cam flash turned and camera stuck flash didnt turn off.so rebooted again same issue noe getting camera unable to intialize.dunno why whats going on with my razr im thinking to flash will it solve or not? Need ur suggestion thanks And Regards HARSHA
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
copy all important docs from int and ext card, format them, then reboot. after, you can try factory reset on stock rom
if not working, there is an mod from camera stock, see theme and app section
Maybe try to fresh install you jb
Yes I do thinking same as I' live in India I can't flash due to 16hrs pwrcut I'll do tomorrow.
Sent from my Golden'd Atrix HD MAXX using xda app-developers app
I'm flashed but still no luck Camera sticks at preview when I take a picture is it cam.fault or board fault?
Sent from my MB886 using xda app-developers app
manually clear cache
Try this: If you are using TB run cache clear for user + system apps. Then boot into recovery and manually clear cache partition
TB means? Im tried clearing cache still no luck .plz watch this video once
https://www.youtube.com/watch?v=TbmZysw8jHQ&feature=youtube_gdata_player
Sent from my XT925 using xda app-developers app
L7iharsha said:
TB means? Im tried clearing cache still no luck
Click to expand...
Click to collapse
Titanium Backup
Related
Good morning guys. I'm having trouble with my Samsung galaxy SGH-I777. Every time I open an app that uses he camera (ie camera, barcode scanner, flashlight, camera) he flash goes off then it just reboots he phone. I've already done a factory restore. I even went into recovery mode and wipe cache and did a restore from there. I've also just downloaded the new ICS update and it still didn't fix the problem. Please help
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
when you say factory restore does that mean you completely wiped the phone and flashed back to stock rom. If not, that's what I would do to determine if we're looking at a hardware or software issue.
No I didn't flash it back to stock. How would I even do that?
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
pichienyfl said:
No I didn't flash it back to stock. How would I even do that?
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Read the stickies
(⊙＿⊙)
OK I flashed a new rom but it didn't work. Flashed back to ics still doesn't work
Sent from my SGH-I777 using xda app-developers app
I would flash back to stock. If it still does it, bring it in to at&t service center and show them. They can give you a replacement. Or you can call them. Just make sure your on non rooted stock firmware.
a full wipe and reflash is required before posting any problems. because99 % of the time it's user error. Did you fully wipe system, cache, data, and run the kernel cleaning scriptbefore posting this issue?
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Yes. I did a full wipe and restore. Installed a new rom and still nothing can I maybe install a new camera apk?
Sent from my SGH-I777 using xda app-developers app
pichienyfl said:
Yes. I did a full wipe and restore. Installed a new rom and still nothing can I maybe install a new camera apk?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
IF this is happening across roms, and assuming correct firmware, with a clean install (factory reset, no misc apps installed) then I'd say you have a hardware problem. If you've flashed incorrect firmware then a reset won't help you until you flash back to the correct firmware. Of course all of this moot if its physical damage caused by dropping the phone or maybe water damage. If you're completely stock and haven't subjected the phone to any physical abuse, then return the phone for a new one.
Phalanx7621 said:
a full wipe and reflash is required before posting any problems. because99 % of the time it's user error. Did you fully wipe system, cache, data, and run the kernel cleaning scriptbefore posting this issue?
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
thanks! went back to full stock and problem went away
pcamlin said:
thanks! went back to full stock and problem went away
Click to expand...
Click to collapse
Awesome! Glad yer back in business
Sent from my SGH-I777 using Tapatalk 2
CallMeAria said:
IF this is happening across roms, and assuming correct firmware, with a clean install (factory reset, no misc apps installed) then I'd say you have a hardware problem.
. . .
Click to expand...
Click to collapse
This.
Run fix permissions in recovery (last resort).
I have an AT&T i717 running ics stock rom. I installed cwm 5.0. something and was intending on installing the CM10 JellyBean rom from paranoid. It would not install from sd card. tried another rom from diff developer, same thing. I read that I needed an updated cwm so I tried to flash another, wouldnt work with the version of ODIN i had so i upgraded to v3.07, was able to flash another and then when I went to recovery it stayed in a black screen, reflashed the older version of cwm and now when I go to recovery it will show the main screen, but if I try to install or even reboot it takes the menu away and shows the symbol in the center. Am I just completely stupid? Have I missed something?
Are you rooted?
Sent from my SGH-I897 using xda app-developers app
severinca said:
Are you rooted?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes...That is the first step I believe.
UPDATE: I have CWM recovery 5.5.0.4 working properly but I am getting an Error Status 7 (yes I have searched but everything I found was old and didn't help) I am trying to run cm-10.1-20120113-NIGHTLY-i717 build as well as pa_quincyatt-2.56-20121219-013738 build. both show same error. Any ideas?
U need to install twrp and then flash from twrp ull have no problem thn
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
deron37129 said:
U need to install twrp and then flash from twrp ull have no problem thn
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thank you. I will give an update shortly.
well the rom flashed and it is in first boot. just flashing the paranoid android 2.+ symbol on the screen. I have heard the first boot is the longest. Been about 5 Minutes. thought I would say thank you (hopefully not prematurely)! :good:
Shudnt have any trouble long as u did a full wipe
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
deron37129 said:
Shudnt have any trouble long as u did a full wipe
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I just realized I forgot to do that...
Do I select factory reset or system from the twrp menu?
MonsterSubie said:
I just realized I forgot to do that...
Click to expand...
Click to collapse
Did it work?
Figured it out. Cleared both cache and delvik Cache and did a factory reset. worked like a charm. thanks for the help and I hope this helps others as well.
Just for future reference, also wiping system along with wiping cache/dalvik and factory reset is good practice. Sometimes not wiping system can cause some issues.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Ok guys i need help. I figure maybe its related to bmm n not rom,so creating this thread outside the rom thread might help somehow. Sorry if its not.Here's the thing;
I tried flashing D-Wiz 3.0.1(just playing around since so many reports talk about its good batterylife)-i choose standard installation in aroma except i decided to try strong undervolting. It boots fine,i setup the fone a bit n suddenly it freezes.
Then i decided to flash again with standard undervolting option,everything done,then it didnt boot,its stuck at the colorful'X' logo for too long,then i hard reset using the 3buttons combo,i entered recovery,there i see'E:cant mount cache' n several error about cant mount cache.Whats its about? No big deal though since i restored my backed up rom but everytime i enter recovery,that msg appears. N fyi i always use 1st system. Latest bmm from market. Any idea please?
Sent from my XT910 using xda premium
Sent from my XT910 using xda premium
Re: (Help) BMM,error cant mount cache?
Its ok,problem solved by entering setting in bmm n deleting,setting up the rom slot again before flashing. Dont know what went wrong though.
Sent from my XT910 using xda premium
Hi guys, I have this weird problem.
Today I bought a S3 from a guy.
When the phone screen turns off because i don't use it, it doesn't wake and reboots.
When I use it, and screen is on, never reboots.
What to do?
I flashed the newest ROM and the problem still exists
R: Rebbot after screen turned off
Have you done a factory reset before flashing?
Sent from my GT-I9300 using xda app-developers app
killbubble said:
Have you done a factory reset before flashing?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes, I did
R: Rebbot after screen turned off
I mean a real factory reset, not the one found in samsung's settings, but in clockworknod's.
Just root, install clockworkmod, factory reset and flash a custom rom or a samsung stock rom edited to run on rooted s3.
If you've already done that, might also try dalvik cache format...but i dunno how much help it can be.
Sent from my GT-I9300 using xda app-developers app
Hi everyone my friend recently rooted his xt910 and then installed 4.2.2 on Safestrap after using few days he wanted to switch to stock ROM but when he activated stock and rebooted he was getting blank screen and showing No is installed he was only able to use CM10.1 is anyway to fix this issue he was running on 982.124.14.XT910.vodafone.en.EU I was searched for fxz file but no luck there is no way to flash via rsd any solutions? Thanks in advance
Sent from my XT890 using xda app-developers app
This doesn't usually happens with Safestarp. Try booting to stock recovery and perform a wipe & factory reset.
If it still shows error, RSDLite is always there.
Still same he didnt back stock rom and there is no fxz for vodafone.en.eu thats the main issue
Sent from my XT925 using xda app-developers app