Motorola noob here in need of some guidence! - Motorola Droid RAZR

So I've always had HTC's and recently had a One X, but decided to sell it due to no micro-sd slot. I had a backup phone, Samsung Infuse 4G (which I'm using now as a daily) and read up and learned about it and about rooting it, since it was another world from what I was originally used to. Now, coming to the Razr forums, I find myself even more lost than I was on the Infuse forum coming from HTC! I currently own the latin american (latam) Claro Razr Maxx running ICS out of the box, and what I pretty much want to know is about rooting it, sim-unlocking it and (if possible) flashing a jb ota (ICS doesnt really cut it...).
So, from what I managed to read and understand, I first need and have to use the "EPRJ_EasyRootICS_MultiOS_v1.5" to root it (pretty easy according to the video).
As fas as sim-unlocking, I believe the only method is through eBay, paying for the unlock code and sending in my IMEI? (Always been against sending my IMEI, but well.... I have AT&T, so....)
Finally, ROM's... I read that I can ONLY flash latam (latin american) based ROM's, and I didn't manage to fing a jb ota for the latam version (unless I didn't look hard enough??).
So, what I really want to know is if I'm on the right path or if there's something else I should know about to achieve what I need.
Thanks in advanced!!

Luisit0 said:
So I've always had HTC's and recently had a One X, but decided to sell it due to no micro-sd slot. I had a backup phone, Samsung Infuse 4G (which I'm using now as a daily) and read up and learned about it and about rooting it, since it was another world from what I was originally used to. Now, coming to the Razr forums, I find myself even more lost than I was on the Infuse forum coming from HTC! I currently own the latin american (latam) Claro Razr Maxx running ICS out of the box, and what I pretty much want to know is about rooting it, sim-unlocking it and (if possible) flashing a jb ota (ICS doesnt really cut it...).
So, from what I managed to read and understand, I first need and have to use the "EPRJ_EasyRootICS_MultiOS_v1.5" to root it (pretty easy according to the video).
As fas as sim-unlocking, I believe the only method is through eBay, paying for the unlock code and sending in my IMEI? (Always been against sending my IMEI, but well.... I have AT&T, so....)
Finally, ROM's... I read that I can ONLY flash latam (latin american) based ROM's, and I didn't manage to fing a jb ota for the latam version (unless I didn't look hard enough??).
So, what I really want to know is if I'm on the right path or if there's something else I should know about to achieve what I need.
Thanks in advanced!!
Click to expand...
Click to collapse
are you cdma or gsm ? model xt 910 or xt 912 ?

naifs_br10 said:
are you cdma or gsm ? model xt 910 or xt 912 ?
Click to expand...
Click to collapse
Ahh my bad, forgot to add those details... Model xt910 and gsm
Sent from my XT910 using xda premium

Luisit0 said:
Ahh my bad, forgot to add those details... Model xt910 and gsm
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
ok firstly you can update to jb using RSD lite and the fastboot files. for the firmware you currently have. i'll get you the link in just a moment. secondly sim unlocking is not like it is in samsung but you can just pay to get it unlocked.
root for jb is only available on linux there is a thread in development section on it will get you that as well in a moment, you can flash any roms as long as you dont flash cdma by accident. this can be confirmed by other members if possible but im very very sure 99% sure that you can flash gsm roms doesnt matter what region and we dont have a gsm patch yet for cdma roms yet so when we do you can flash cdma roms with gsm patch as well. ok. now let me get you the links
1) http://forum.xda-developers.com/showthread.php?t=2231289
this link above is for firmware you will need to download and use rsd lite version 6.0 to flash to get to jb and remember there is no way back to ics once you do that.
2) http://forum.xda-developers.com/showthread.php?t=2246747
this one is for rooting once you have jb. for now its only linux you can sideload ubuntu then delete or wait till they release a windows type method.
good luck

naifs_br10 said:
ok firstly you can update to jb using RSD lite and the fastboot files. for the firmware you currently have. i'll get you the link in just a moment. secondly sim unlocking is not like it is in samsung but you can just pay to get it unlocked.
root for jb is only available on linux there is a thread in development section on it will get you that as well in a moment, you can flash any roms as long as you dont flash cdma by accident. this can be confirmed by other members if possible but im very very sure 99% sure that you can flash gsm roms doesnt matter what region and we dont have a gsm patch yet for cdma roms yet so when we do you can flash cdma roms with gsm patch as well. ok. now let me get you the links
1) http://forum.xda-developers.com/showthread.php?t=2231289
this link above is for firmware you will need to download and use rsd lite version 6.0 to flash to get to jb and remember there is no way back to ics once you do that.
2) http://forum.xda-developers.com/showthread.php?t=2246747
this one is for rooting once you have jb. for now its only linux you can sideload ubuntu then delete or wait till they release a windows type method.
good luck
Click to expand...
Click to collapse
Thanks for this, I'll get to it right away! I don't think I'll miss ICS once I'm on JB
Also, just to be sure... Do I have to root ICS first using EasyICSRoot one-click?
EDIT: I also found this: http://forum.xda-developers.com/showthread.php?t=2257137
Would it be better to use that method instead of the Linux one?

Luisit0 said:
Thanks for this, I'll get to it right away! I don't think I'll miss ICS once I'm on JB
Also, just to be sure... Do I have to root ICS first using EasyICSRoot one-click?
EDIT: I also found this: http://forum.xda-developers.com/showthread.php?t=2257137
Would it be better to use that method instead of the Linux one?
Click to expand...
Click to collapse
Yeah try that easy method . Its really very easy to root the phone .
We can't say it completely for windows because the stuff is running on vm and phone is connected to samba server but still ya can try this as it is really easy
Thx
Hit the thx button if i helped ya in anyways

anurag.dj2u said:
Yeah try that easy method . Its really very easy to root the phone .
We can't say it completely for windows because the stuff is running on vm and phone is connected to samba server but still ya can try this as it is really easy
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
I will, thanks! Just gotta wait till the Rogers Canada 4.1.2 firmware finishes downloading... For some reasin it's downloading slow as f**k!!

Luisit0 said:
I will, thanks! Just gotta wait till the Rogers Canada 4.1.2 firmware finishes downloading... For some reasin it's downloading slow as f**k!!
Click to expand...
Click to collapse
Lolz . **** happens so don't worry
I think that easy root method may not work on Rogers Canada karnel . Try it once and hit us back here because ive not yet seen any post about getting rooted by that Dan method .
I hope that would work on ya RAZR too.
Thx
Hit the thx button if i helped ya in anyways

anurag.dj2u said:
Lolz . **** happens so don't worry
I think that easy root method may not work on Rogers Canada karnel . Try it once and hit us back here because ive not yet seen any post about getting rooted by that Dan method .
I hope that would work on ya RAZR too.
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
Thanks bro, and I will do it too! I was counting on doing it the moment I replied but looks like im gonna have to wait till friday to flash jb and attempt to root it with that method.. Still, thanks for ur help too!

So finally I have free time!! I rooted my XT910 with easyrootics, so now I'm rooted. Now, I have a doubt about RSD Lite... How exactly do I use it? I mean, I connected the phone via USB but it really didn't do anythin to let me know it detected my Maxx... Also, I clicked the button to browse for the firmware .xml.zip file and chose do decompress it (only option available to click) and it seemed to do so fine, but I really don't know what to do from there... There's a button that says "Start" at the top, next to the browse button, but I wasn't sure if that's the next step. What do I do next?

Just install the motorola drivers for ya PC and install it and then connect ya phone to the PC it will automatically install all the appropriate drivers of RAZR maxx now once ya done with installing all the drivers . Switch off ya phone ,press both vol- and vol+ at a time and power botton , it ll take ya to the bootloader jist press vol- down and select fasboot (on 3rd no. ) and press vol+ to selct that .
Now open rsd lite and ya can find ya phone model in it connecting into fastboot mode now decompress the .xml fasboot file and hit the flash rsd lite ll start flashing . Ya cell phone ll restart 2or3 times during flashing
Once ya see done in rsd lute just disconnect ya phone from usb now go into the stock recovery and do full wipe data and caches.
Profit
Thx
Hit the thx button if i helped ya in anyways

anurag.dj2u said:
Just install the motorola drivers for ya PC and install it and then connect ya phone to the PC it will automatically install all the appropriate drivers of RAZR maxx now once ya done with installing all the drivers . Switch off ya phone ,press both vol- and vol+ at a time and power botton , it ll take ya to the bootloader jist press vol- down and select fasboot (on 3rd no. ) and press vol+ to selct that .
Now open rsd lite and ya can find ya phone model in it connecting into fastboot mode now decompress the .xml fasboot file and hit the flash rsd lite ll start flashing . Ya cell phone ll restart 2or3 times during flashing
Once ya see done in rsd lute just disconnect ya phone from usb now go into the stock recovery and do full wipe data and caches.
Profit
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
huh, had no idea i had to power it off before.. aight so after rsd is done how do i get to recovery? vol-, vol+ and power?
EDIT: finally, would u recommend flashing one of the jb firmwares or one of the rom .zip's instead? or is my only option flashing the firmware? cause i was thinkin of this one: http://forum.xda-developers.com/showthread.php?t=2234934

The link ya attached is not actually firmwares, thats a custom rom made from stock rom . Yeah ya can flash that as well if ya have root privilege.
Just read the op and requirements before flashing the rom because its saying ya need to be on ....................latam (xml).
So check out ya system version in about phone if it matches go ahead to flash that rom . Thx :thumbup:
Hit the thx button if i helped ya in anyways

anurag.dj2u said:
The link ya attached is not actually firmwares, thats a custom rom made from stock rom . Yeah ya can flash that as well if ya have root privilege.
Just read the op and requirements before flashing the rom because its saying ya need to be on ....................latam (xml).
So check out ya system version in about phone if it matches go ahead to flash that rom . Thx :thumbup:
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
aaah i see now.. so basically if i wanna flash that rom i gotta do the same thing u said but with the latam firmware stated on the op? cause the one i was gonna flash originally via rsd lite is also latam, but from canada and 4.1.2... i understand it just has to be latam, so im guessing using the one in the rom thread's op instead of the canada one would do the same thing except keep me on ICS as stated on the op so that i can then flash the 4.1.2 rom?
also, just an fyi, my device's build number is 6.7.2-180_SLC-34 and the firmware on the op's build number is 6.7.2-180_SLC-35
also, my firmware configuration is GAS_LA_SPYDERICSCLALALA_P034 and the firmware on the op's is SPYDERICSRETBRLA, both of em LATAM so im guessin i should be ok flashin that firmware on rsd lite?? so many questions... lol im sorry, just tryin to be 100% sure, i rlly dont wanna mess up this phone.. i love it!
EDIT: as of now, im rooted on ics 4.0.4 and have bmm installed... i just booted into the custom recovery and did a full backup... u never know when its gonna come in handy lol

Related

[Q] how to return the Atrix 4G to stock 2.3.6 ?

Is there any way to return to COMPLETE STOCK 2.3.6 ? of course also to be rooted.
Thanks !
Not an OP but extensively read
I would like to know the answer to this also. I've read everywhere and there seems to be lots of warnings involved when going back to a stock room on the Atrix 4G. Is anyone available to confirm?
Only safe way is to flash a Fruitcake.
Check the Fruitcakes thread...
Sent from my MB860 using XDA Premium App
ccrows said:
Only safe way is to flash a Fruitcake.
Check the Fruitcakes thread...
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
What are the dangers in flashing with RSDlite ? i flashed my fathers RAZR with it few times..
I have flashed two phones with the stock sbf. I don't know why everyone is freaking out about it. I just flashed a 2nd time to be sure. NO PROBLEMS ......
chrism.brunner said:
I have flashed two phones with the stock sbf. I don't know why everyone is freaking out about it. I just flashed a 2nd time to be sure. NO PROBLEMS ......
Click to expand...
Click to collapse
guide please ?
Download the latest RSD lite.
Install the program on your Windows computer. ( xp works best for me. Sometimes get errors on win7).
Download the 2.3.6 sbf. Make sure it is the one for your carrier.
Open rsd lite.
Select the sbf file.
Start.
That's what I did. It was simple.
A google search could probably find you a better guide though.
Good luck.
As usual, this is what I have done, and I take no responsibility if it doesn't work for you.
Using rsdlite to flash an .sbf is dangerous if you flash one prior to 2.3.4 gingerbread. All others are safe to my knowledge. But using pudding is easier and faster.
Sent from my MB860 using Tapatalk 2
Quick note: If you SBF flash a stock ROM while you're on a custom ROM, remember to wipe the data in stock recovery when you're done! :good:
Thanks !
Now, where can i find SBF file which is compatible with ATT Atrix 4G in Israel ?
My carrier is Cellcom but i bought the phone with ATT Rom.
And another q's, if i flash SBF of complete stock 2.3.4, will i be able to use Moto OTA update through the phone to get 2.3.6 ?
Thanks again !
Edit -
what about one of those ?
https://sites.google.com/site/motosbf/atrix-sbf-files
Edit #2 -
Or maybe shall i use this ?
http://direct.motorola.com/ENG/Soft...ountry=GBR&language=ENG&web_page_name=SUPPORT
Edit #3-
if i do this - http://www.androidauthority.com/atrix-4g-revert-4-5-91-stock-firmware-52952/
Will i be able to use OTA update ?
Edit 4#-
or this - http://www.android-advice.com/2012/fix-bricked-motorola-atrix-after-ota-update/
Do not use RSD lite and .sbf. do some searching and you will find that Motorola doesn't condone using RSd lite for public use. Flash the appropriate fruitcakes just like you would a rom except wipe the phone completely (especially when you are down grading. If you do use rsd lite and hard brick your phone I will have no sympathy for you as your phone will be a very expensive paper weight. Many many people have already started forum pages on why you should not use rsd lite. Just my opinion... take it or leave it as you may.
Sent from my MB860 using Tapatalk 2
Mphill46 said:
Do not use RSD lite and .sbf. do some searching and you will find that Motorola doesn't condone using RSd lite for public use. Flash the appropriate fruitcakes just like you would a rom except wipe the phone completely (especially when you are down grading. If you do use rsd lite and hard brick your phone I will have no sympathy for you as your phone will be a very expensive paper weight. Many many people have already started forum pages on why you should not use rsd lite. Just my opinion... take it or leave it as you may.
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
mhh...:<
ok, you got me convinced.
Thank you all !
Your welcome... didn't mean to come off harsh, but I'd rather sound harsh then have another fellow member hard brick their phone.. use the search and look for fruitcakes... completely safe, just remember to always have a known working backup as always before upgrading or downgrading versions.
Sent from my MB860 using Tapatalk 2
Mphill46 said:
Your welcome... didn't mean to come off harsh, but I'd rather sound harsh then have another fellow member hard brick their phone.. use the search and look for fruitcakes... completely safe, just remember to always have a known working backup as always before upgrading or downgrading versions.
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
No, its totally fine.I appreciate your help !
Sorry but there seems to be an issue with all the 2.3.6 fruitcakes...:\
is it ok if i flash this SBF ?
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf
I live in Israel and have the ATT atrix 4G running Cm7 now.
The problem with sbf files is if you flash the wrong one. Make sure you have the right one and you will have no problems. Check the other threads. There are alot of us flashing them.
It would solve your problem.
Check out this thread.
http://forum.xda-developers.com/showthread.php?t=1806106
chrism.brunner said:
Check out this thread.
http://forum.xda-developers.com/showthread.php?t=1806106
Click to expand...
Click to collapse
Thanks but is there a specific SBF that i can flash ? or is the one on my previous comment good to flash ?
That is the one that i flash.
chrism.brunner said:
That is the one that i flash.
Click to expand...
Click to collapse
So if i have an ATT Atrix 4G, but i live in Israel and not the US, can i flash this freaking truble maker ? XD

Please Help. RAZR MAXX JB 4.1.2 bricked.

Hello Razr people,
I have Chinese Razr maxx with Blur_Version.67.213.6.XT910.ChinaRetail.en.CN.zip OTA installed.
CDT might have been 5. But still I managed to root with a chinese root method.
Everything was fine until I went outside China.
None of the sim cards I tried were working. And in China, apart from China Telecom, everything else was working.
So I thought, maybe I should try the GSM patch with the magic code patch given in XDA in some other thread.
Hence I went into BMM recovery, installed the patch. rebooted the phone.
And it didn't start at all for like 30 minutes. It was stuck with M logo and blinking every now and then.
Hence, I decided to factory reset from stock recovery. Still it's the same.
And now I think I cannot flash it back to JB, as it was an OTA, and there's no firmware for flashing.
as CDT might have gone higher, I can't even go back to ICS.
I am new to all this, but I have spent a lot of time in reading all this info and now I'm stuck wondering what can i do if JB with higher CDT got bricked?
Please Please guys, I really need help with this,
Thank you very very much in advance. I really really appreciate it.
nishuthereaper said:
Hello Razr people,
I have Chinese Razr maxx with Blur_Version.67.213.6.XT910.ChinaRetail.en.CN.zip OTA installed.
CDT might have been 5. But still I managed to root with a chinese root method.
Everything was fine until I went outside China.
None of the sim cards I tried were working. And in China, apart from China Telecom, everything else was working.
So I thought, maybe I should try the GSM patch with the magic code patch given in XDA in some other thread.
Hence I went into BMM recovery, installed the patch. rebooted the phone.
And it didn't start at all for like 30 minutes. It was stuck with M logo and blinking every now and then.
Hence, I decided to factory reset from stock recovery. Still it's the same.
And now I think I cannot flash it back to JB, as it was an OTA, and there's no firmware for flashing.
as CDT might have gone higher, I can't even go back to ICS.
I am new to all this, but I have spent a lot of time in reading all this info and now I'm stuck wondering what can i do if JB with higher CDT got bricked?
Please Please guys, I really need help with this,
Thank you very very much in advance. I really really appreciate it.
Click to expand...
Click to collapse
Reflash the Chinese fastboot file using rsd lite and then again apply the ota update.zip and do full wipe /factory reset and wipe caches . It will fix ya razr
Thx
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Reflash the Chinese fastboot file using rsd lite and then again apply the ota update.zip and do full wipe /factory reset and wipe caches . It will fix ya razr
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
Thanks. However, I was wondering can I still flash the ICS fastboot after having the JB OTA installed that too with higher CDT?
I still have BMM coming when I boot the phone.
So I am afraid of fastbooting the ICS file and loosing even BMM.
Please let me know what do you think is the best option?
A
1. Flash ICS flastboot of Chinaretail.
2. Upgrade via the zip file of the 4.0.4 OTA
3. Update via zip to ChinaRetail JB 4.1.2
or
B
1. Install a custom rom like AOKP on 2nd rom/system slot (Will it work though?)
Thank you very much.
nishuthereaper said:
Thanks. However, I was wondering can I still flash the ICS fastboot after having the JB OTA installed that too with higher CDT?
I still have BMM coming when I boot the phone.
So I am afraid of fastbooting the ICS file and loosing even BMM.
Please let me know what do you think is the best option?
A
1. Flash ICS flastboot of Chinaretail.
2. Upgrade via the zip file of the 4.0.4 OTA
3. Update via zip to ChinaRetail JB 4.1.2
or
B
1. Install a custom rom like AOKP on 2nd rom/system slot (Will it work though?)
Thank you very much.
Click to expand...
Click to collapse
In ya case i believe both method are wrong and wont work on ya razr .
For first method :
Just flash the appropriate china fastboot via rsd and then apply jellybean ota.zip from stock recovery .
Ya don't have to flash ics ota.zip ,just fastboot would work to update ya phone to jellybean
Second method :
Ya can't install akop or cm10 unless ya not on jellybean .
So first update ya phone to jellybean and then root (if root exploit is available for Chinese jellybean ) ,
Install ss or bmm ,
Partition and install custom roms on 2nd or 3rd slot
Thx
Hit the thx button if i helped ya in anyways
Thanks bro. I will do it as soon as my battery is up and will let you know the result.
But really a huge thanks for help.
nishuthereaper said:
Thanks bro. I will do it as soon as my battery is up and will let you know the result.
But really a huge thanks for help.
Click to expand...
Click to collapse
Its my pleasure that i helped ya outta ... please do full charge ya battery a if ya going to flash fastboot because battery drainage problem is sucks while flashing
Thx
Hit the thx button if i helped ya in anyways
Hey man,
Thanks a ton. I got AOKP 4.2.2. JB installed in slot 2 and it's working flawlessly.
However, I cannot access the network provider. So there is no mobile network.
My phone is unlocked.
Another strange thing is that, in the settings menu, the IMEI number is 000000000 ...
Now that is not possible as far as I know.
Any idea as to what I can do to get the network and make phone calls?
Thanks again for all your help.
nishuthereaper said:
Hey man,
Thanks a ton. I got AOKP 4.2.2. JB installed in slot 2 and it's working flawlessly.
However, I cannot access the network provider. So there is no mobile network.
My phone is unlocked.
Another strange thing is that, in the settings menu, the IMEI number is 000000000 ...
Now that is not possible as far as I know.
Any idea as to what I can do to get the network and make phone calls?
Thanks again for all your help.
Click to expand...
Click to collapse
I think ya should flash ya region basband . Try to look on forum for Chinese basband
Hit the thx button if i helped ya in anyways
Hey man, I tried to install the baseband from the previous OTA that was on my phone ... and another Baseband from Chinese JB Fastboot.
However, still no network or no imei.
I am currently in India, so does it mean I will have to find an indian baseband?
Also, AOKP is installed via BMM in rom slot system 2.
Can that be a problem?
I was wondering if I tried to flash with a Chinese JB fastboot via RSDLite, will it flash through properly?
Cause then at least I can send my phone to motorola and ask them about the network issue.
Thanks so much though. Seriously. You are a saviour.
nishuthereaper said:
Hey man, I tried to install the baseband from the previous OTA that was on my phone ... and another Baseband from Chinese JB Fastboot.
However, still no network or no imei.
I am currently in India, so does it mean I will have to find an indian baseband?
Also, AOKP is installed via BMM in rom slot system 2.
Can that be a problem?
I was wondering if I tried to flash with a Chinese JB fastboot via RSDLite, will it flash through properly?
Cause then at least I can send my phone to motorola and ask them about the network issue.
Thanks so much though. Seriously. You are a saviour.
Click to expand...
Click to collapse
No ya don't have to flash Asian retail jellybean ota beacause ya are on Chinese kernel ,ya may stuck on fastboot if ya flash Asian retail on ya razr unless ya don't erase ya cid .
I just can't understand why ya getting network issue even after flashing all the baseband. Damn !!
Try to flash Indian baseband it may help ya .
Nah flashing any custom rom on another slot doesn't affect stock slot at all akop or cm10 is not the issue .
Edit : flashing different region kernel and bricking ya phone and send it to service centre wont help ya at all beacsue they ll come to know that ya tried to flash it illegally so ya warranty no more void . As ya saying ya in India and using Chinese xt910 ,service centre ll not accept it so ya need to go back to China and give it there for fix
Thx
Hit the thx button if i helped ya in anyways

help?

I've been runingg CM10.1 and )tried) to flash another Rom.
Since then I have not been able to flash anything - I have run out of being able to access my BBm and I am unable to flash anything on my external (Installation Aborted) and nothing will boot.
Some help would be appreciated. (sorry if it's a bit garbled=Sunday night and all that)
Its not big issue if ya found ya bmm or ss3 not working . Just ya need to tell me a bit about your phone so that i can help ya .
What is ya phone system version ( if ya don't know may i know from which country ya bought ya phone )
Hit the thx button if i helped ya in anyways
GSM U.K.
And stock android version
Hit the thx button if i helped ya in anyways
I was on cm10.1 (30/4 nightly) and was trying to flash Avatar Rom 2.9b-747-20130504-umts_spyder when I messed up my phone.
I can access stock recovery but that's it.
Rsd. Lite back to stock and start over again
Sent from my XT910 using Tapatalk 2
so I managed to flash Jelly Bean OTA 982.124.14.XT910.Retail.en.EU but now I have no root so I am just wondering if anyone knows of an idiot proof method to root my phone again. Thanks.
barry_ said:
so I managed to flash Jelly Bean OTA 982.124.14.XT910.Retail.en.EU but now I have no root so I am just wondering if anyone knows of an idiot proof method to root my phone again. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2257137
Not idiot proof, but as far as I know, the only way.
barry_ said:
so I managed to flash Jelly Bean OTA 982.124.14.XT910.Retail.en.EU but now I have no root so I am just wondering if anyone knows of an idiot proof method to root my phone again. Thanks.
Click to expand...
Click to collapse
You can sideboard ubuntu and then delete it after once you have root or. Don't as a virtual. Machine very easy and simple hopefully we all get some windows love soon for this root thanks to Dan Rosenberg
Sent from my XT910 using Tapatalk 2

[Q] Flashing rom question about MOTO RAZR MAXX XT910

My device is a HK version of XT910 and has flashed the device for the euro 4.1 rom.
Unfortunately it cannot search any 2g/3g signal and thus i wanna flash back the HK4.0 rom to repair the phone.
I heard it is not possible to do so as the bootloader has been upgraded which cannot be downgraded afterwards.
I know XDAs are one of the best developers for smartphone, so wanna find some support here.
Deep thanks if guidance can be provided for my case.
Unfortunately ya can not degrade to the ICS or GB . Whatever ya heard is correct .
Now if ya having network problem what all ya can do is root ya phone and flash custom roms . I hope some custom roms may help ya finding the network
Please hit the thanks :thumbup: if i ever helped ya !!
what if he flash HK 4.1 ROM ? anyway he can`t go back so he have to try , wait, he should make full wipe in stock recovery if that's don`t help then flash HK 4.1
veimus said:
what if he flash HK 4.1 ROM ? anyway he can`t go back so he have to try , wait, he should make full wipe in stock recovery if that's don`t help then flash HK 4.1
Click to expand...
Click to collapse
HK 4.1 will never be available as Motorola abandons that market.
anurag.dj2u said:
Unfortunately ya can not degrade to the ICS or GB . Whatever ya heard is correct .
Now if ya having network problem what all ya can do is root ya phone and flash custom roms . I hope some custom roms may help ya finding the network
Please hit the thanks :thumbup: if i ever helped ya !!
Click to expand...
Click to collapse
thanks so much man. I am a new born baby for flashing roms so would like to ask any roms' recommendation? and for an euro 4.1.2 xt910, i jus find a root method from here http://forum.xda-developers.com/showpost.php?p=40901777&postcount=30 and cant root successfully and stopped like this pic's last sentence http://imageshack.us/a/img21/7610/rootrazrmaxx5.png.
Thanks ya
PALMPIL0T said:
HK 4.1 will never be available as Motorola abandons that market.
Click to expand...
Click to collapse
yup,:crying:
and without flashing back the HK roms, i can jus go to the street to find some not professionals to help me fix the network problem(coz i dont reli know whether the network problem is caused by flashing an euro rom or is the cell phone's sim card slot problem)
another question- how to uninstall safestrap? i have 2 rom-slot of CM10.1 but deleted the stock rom(official euro 4.1.2).
If i want to flash back the official rom using rsd lite, do i need to delete the partitions first? But as i dont have stock rom now, will there be any problems for me to just flash the rom using the lite?
I am unable to quote the comments and give reply for a particular problem but ya need to root ya RAZR because unless ya don't have super user access ya cant flash any custom Roms. Follow the instruction properly and get root privilege anyhow to flash custom roms . I know its kinda tough to work on linux and root razr but unfortunately there is no one click root method is available sir ..
Ya can get so many custom roms available in development thread but i would like to recommend ya to flash jelly wiz or d wiz first because cm10 still having network issues .
Please hit the thanks :thumbup: if i ever helped ya !!
---------- Post added at 08:34 PM ---------- Previous post was at 08:32 PM ----------
iankeung said:
yup,:crying:
and without flashing back the HK roms, i can jus go to the street to find some not professionals to help me fix the network problem(coz i dont reli know whether the network problem is caused by flashing an euro rom or is the cell phone's sim card slot problem)
Click to expand...
Click to collapse
I believe it is because ya flashed different region jellybean which having different baseband then HK. So only flashing a custom rom can only fix ya problem amd for that ya really need root
Please hit the thanks :thumbup: if i ever helped ya !!
---------- Post added at 08:38 PM ---------- Previous post was at 08:34 PM ----------
iankeung said:
another question- how to uninstall safestrap? i have 2 rom-slot of CM10.1 but deleted the stock rom(official euro 4.1.2).
If i want to flash back the official rom using rsd lite, do i need to delete the partitions first? But as i dont have stock rom now, will there be any problems for me to just flash the rom using the lite?
Click to expand...
Click to collapse
Oooops !! I'm sorry if ya already have rooted ya phone then why ya trying to root again lolz .
Come to the point , do not try to uninstall safestrap and delete the slot because ya do not have stock rom on ya phone so if ya delete ya slot 1 then phone ll normally boot to stock and stuck to the bootloops . If it happens then there is only way to fix is flashing fastboot again via rsd lite .
Note : ya ll loose ya root if ya flash it via rsd again and as i have already said rooting from Linux is really tough .
Please hit the thanks :thumbup: if i ever helped ya !!

[Q] rooting

Hi,
the Atrix 4G root thread has post 1 to download sbf and second post has preinstall.zip for international users and fast boot mode at http://forum.xda-developers.com/showthread.php?t=1138204
The sbf links in post 1 on thread do not get me the sbf so owning ATT phone is it still ok to use post 2 steps to root ?
I learned to a script to do rooting but could not get its link. if some one has it please share.
Regards,
Miten.
If you really only want root, the preinstall image is all you need. No idea why you'd want to mess with some SBFs just for rooting.
I agree, the only reason you should be messing with an sbf is if you're going to unlock the bootloader to load a custom rom, or a last ditch effort to return to stock
Sent from my MB860 using xda app-developers app
try
dude dont worry try doomlord rooting kit i cant give the link cause i am not alowed to so download it connect your phone to your pc start doomlord install drivers if you want then press any key to continue it will automaticly boot when it has finished
good luck
hit the thanks button please:highfive:
savio_mascarenhas said:
dude dont worry try doomlord rooting kit i cant give the link cause i am not alowed to so download it connect your phone to your pc start doomlord install drivers if you want then press any key to continue it will automaticly boot when it has finished
good luck
hit the thanks button please:highfive:
Click to expand...
Click to collapse
After update my wife mb860 to latest from ATT, no longer had root. Lucky found your post with that "doomlord: key word. Thanks, now her phone is rooted again. Next step is to find easyway to try ICS/jellybean on her phone.
conket said:
After update my wife mb860 to latest from ATT, no longer had root. Lucky found your post with that "doomlord: key word. Thanks, now her phone is rooted again. Next step is to find easyway to try ICS/jellybean on her phone.
Click to expand...
Click to collapse
You've got some good ones to chose from, just gotta decide if ics or jb is better for you.
Sent from my MB860 using xda app-developers app

Categories

Resources