I was trying to root my phone using
S-OFF, root, & Fix Everything All-in-One! by remanifest at androidforums.com
When I got to the wire trick, my phone turned and now won't turn on. No red light. When connected to windows it shows up as QHSUSB_DLOAD on Device Manager. Any one know how to help? Thanks
I have HTC Evo V 4G virgin mobile
http://forum.xda-developers.com/showthread.php?t=1627917
EM|NEM said:
http://forum.xda-developers.com/showthread.php?t=1627917
Click to expand...
Click to collapse
Tried but can't go past ./brickdetect.sh
my phone is not being detected by ubuntu at all.
did you use JuopunutBear S-OFF?
Jaee Geee said:
did you use JuopunutBear S-OFF?
Click to expand...
Click to collapse
yes
What do you get when you try to turn it on???
---------- Post added at 10:30 PM ---------- Previous post was at 10:16 PM ----------
Sorry lol. You said it won't turn on, try to hold power and vol down then go to fastboot. You should try to use a pc to reflash your boot.IMG from the Rom you have. Just extract the boot from the zip. Make sure you got the driver on the pc so it will read the phone and SDK-tools or if you can reflash a Rom. I hope that will help you. Sorry if it doesnt
Jaee Geee said:
What do you get when you try to turn it on???
---------- Post added at 10:30 PM ---------- Previous post was at 10:16 PM ----------
Sorry lol. You said it won't turn on, try to hold power and vol down then go to fastboot. You should try to use a pc to reflash your boot.IMG from the Rom you have. Just extract the boot from the zip. Make sure you got the driver on the pc so it will read the phone and SDK-tools or if you can reflash a Rom. I hope that will help you. Sorry if it doesnt
Click to expand...
Click to collapse
It won't turn on or charge, Tried power and vol-. Tried power vol+. Tried vol- while connecting to the computer. Tried connecting to computer with and without battery. I get nothing. Ubuntu can't detect the phone and Windows detects as QHSUSB_DLOAD. I have tried the Ultimate Recovery Tool 3.1. It can't go past "Waiting for Device."
Do you know of anything else I can try?
Thank you for replying
Well sorry I couldn't help. But ill research and see what I can find. You could try the unbrick project again, you might need a diver for the QHSUSB_DLOAD so it will read it on the pc. I never ran into any kind of bricking incident so I'm not that experienced. Sorry
Jaee Geee said:
Well sorry I couldn't help. But ill research and see what I can find. You could try the unbrick project again, you might need a diver for the QHSUSB_DLOAD so it will read it on the pc. I never ran into any kind of bricking incident so I'm not that experienced. Sorry
Click to expand...
Click to collapse
Thanks for trying to help.
I guess I'm going back to my Optimus V
Related
Please help! After flashing a new rom (Nexus_Prime_360_Vr-1_3-1),my PC (windows 7 64 bit), Odin and Heimdall doesn't recognize my Vibrant, after that i accidentally formatted boot in CWM. Now i can only acces to download mode and PC doesnt recognize my phone in anyway, i installed drivers correctly . When i power on the phone, nothing shows because the vibrant screen,pleaaaaaaaaaaaaaase help to fix my Vibrant!!!!!!!!!!!!!
vnh001 said:
Please help! After flashing a new rom (Nexus_Prime_360_Vr-1_3-1),my PC (windows 7 64 bit), Odin and Heimdall doesn't recognize my Vibrant, after that i accidentally formatted boot in CWM. Now i can only acces to download mode and PC doesnt recognize my phone in anyway, i installed drivers correctly . When i power on the phone, nothing shows because the vibrant screen,pleaaaaaaaaaaaaaase help to fix my Vibrant!!!!!!!!!!!!!
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=848737
---------- Post added at 02:27 PM ---------- Previous post was at 02:16 PM ----------
Mostdef said:
try this
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
there many way to unbrick your phone
here what i found
Try this, it is slightly different from what the guy earlier said..
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have Odin OPEN with admin privileges!
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
Continue holding the volume keys & you should pop into DOWNLOAD mode within a few seconds
or
1. remove battery, sim and sd
2. Open Odin
3. Connect usb to phone
4. Hold down both volume keys and power
5. but battery back in
6. once the screen blinks, let go of the power button
7. keep holding both volume keys until the downloading screen starts
8. Flash back to stock. I always go back to stock after something like this just to make sure that nothing got corrupted. Also check the re-partition option.
---------- Post added at 02:41 PM ---------- Previous post was at 02:27 PM ----------
OOP wrong thread
i've tried all but pc and odin still dont recognize my phone
Another suggestion is to try the Jig
And if that is not working then your only option is Jtag
go to www.mobiletechvideos.com and he sells professional JIGs for $8 and he can also fix complete bricks for $40. I ordered my JIG yesterday but I'm expecting that I will have to have him do the Jtag on it because my phone just DIED badly yesterday. Nothing has worked. We'll see what happens.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
vnh001 said:
i've tried all but pc and odin still dont recognize my phone
Click to expand...
Click to collapse
does it even turn on?
Another suggestion is to try the Jig And if that is not working then your only opti
if i try the Jig, my pc will recognize phone or not?
vnh001 said:
if i try the Jig, my pc will recognize phone or not?
Click to expand...
Click to collapse
The Jig is to get it into Download mode. As you had stated earlier you can do this without issue.
I am guessing you are just missing the "Nexus S" drivers on your machine. I had to install them before it would recognize my phone when I first went to ICS.
You should find a link for the "Nexus S" drivers in the Development section. ICS does not want the Galaxy S drivers.
usb driver
http://forum.xda-developers.com/showthread.php?t=1459304&highlight=nexus+s+driver
Sorry this is the wrong driver, You gave him the HOST mode driver.
You will need the drivers listed here http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/
thank you for help but my phone after installing nexus s drivers still can not be recognized by pc and odin((((
vnh001 said:
thank you for help but my phone after installing nexus s drivers still can not be recognized by pc and odin((((
Click to expand...
Click to collapse
Hi,
did you try installing google's SDK? try installing Java SDK x64 http://www.oracle.com/technetwork/java/javase/downloads/index.html
then install http://developer.android.com/sdk/index.html
when installing Android SDK in the "extra" section check the usb drivers.
after it downloads you can try changing the drivers in the device manager of windows and use the drivers found here.
C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
well thats what i did after odin didnt recognize my phone. but my phone wasnt bricked. hope it helps.
thank you for triying help to me!!!!!! I also installed ANDROID SDK bu noyhing help me to fix that problem and PC stil recognized my phone as an {unknown device} ((((((((
Edit: nvm i see that you can access download mode.
It is definitely a driver issue, try a different usb port or even a different computer.
thank's but i've already tried that in 4 different PCs but nothing helped me there are shown only unknown device
Please anybody Help to fix my vibrant!!!!
vnh001 said:
Please anybody Help to fix my vibrant!!!!
Click to expand...
Click to collapse
Try a new USB cable.
I can tell you from experience that I thought I was completely bricked...I went out and bought a brand new phone! BUT, when I got home from the store, I kept trying, and I finally got everything working.
I know it's been said, but really make sure you have the correct drivers on your computer! That's the thing that saved me. I didn't have them at first, and I finally found them...do you have a friend whose computer you can try?
I had the same issue with my phone a while back.. I called Samsung, told them it just stopped working, and somehow i managed to still be under warranty. I sent it to them, and they say they replaced some parts or something, and sent it back working like new.
However, i would suggest trying the JIG. Ive heard it works, just forces your phone into download mode, and ODIN at that point should recognize it. GL
(Might want to try cleaning your computer, the registry files, and rebooting. Cant tell you how often thats helped solve issues for me.)
Thanks all for help but my phone didnt fixedhttp://media.xda-developers.com/images/smilies/frown.gif
How I fix those bricks....
1. Download AI0 Vibrant Tool Box here...
http://www.google.dm/url?sa=t&rct=j...uJ2iBA&usg=AFQjCNHHTDPoSZz-8jqhAHy7S2lsO5Vq4g
2. Run the toolbox.exe file.
3. From menu do "Install Drivers" just to be sure & follow screen directions.
3. Remove the phone battery.
4. From AI0 Menu select "Flash to Stock"
5. From Menu select Reboot into download & Start ODIN
6. Connect your USB cable to phone.
7. Hold down both UP/Down Volume buttoms AND Power button.
8. While doing that Install your battery.
9. See if Odin will recognize the phone by highlighting the ID:COM to yellow.
10. If so then load the PIT & PDA files & flash back to stock Eclair 2.1
Thank you,but AIO Vibrant Toolbox 2.5 doesnt help me to fix my vibrant,there are still uknown device((((((((((((
Dont know how i turn in this situation.
I tried to root it, and did almost everything to turn back to the original OS, but cant find any resolve..
The recovery mode is the CWM.. what should i do? Do i need new data?..
Please someone, HELP!!
Any help please??
I'm sorry for you. I think at this moment, you have to wait since this tablet is too new.
Sent from my SGP312 using Tapatalk
---------- Post added at 12:51 AM ---------- Previous post was at 12:50 AM ----------
ngvuanh said:
I'm sorry for you. I think at this moment, you have to wait since this tablet is too new and you don't need to ask the same question for several times.
Sent from my SGP312 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGP312 using Tapatalk
Even the "helpers" seem to have no clue...
Bagiz, you must hard-reset the device and flash a FTF. Then it will work again.
How this is done has been mentioned numerous times on xda and elsewhere on the net, no need to repeat it again and again for each brickflasher.
hasenbein1966 said:
Even the "helpers" seem to have no clue...
Bagiz, you must hard-reset the device and flash a FTF. Then it will work again.
How this is done has been mentioned numerous times on xda and elsewhere on the net, no need to repeat it again and again for each brickflasher.
Click to expand...
Click to collapse
I tried to flash with FTF file via Flashtool, the flash seem like nor reconize my device.. in the log is "device is disconnected"
I saw somebody in youtube revive his phone via CMD with 3 .img files: boot, recovery and system (i think)
But i cant find such files in the net for my tablet..
*rolling eyes* You must first start the tablet in flash mode (turn off, Vol down, then connect USB, then LED should be blue)...
hasenbein1966 said:
*rolling eyes* You must first start the tablet in flash mode (turn off, Vol down, then connect USB, then LED should be blue)...
Click to expand...
Click to collapse
...i did it.. i know im stupid but not that much..
Still, "device is disconnected" or something like that..
bagiz010 said:
...i did it.. i know im stupid but not that much..
Still, "device is disconnected" or something like that..
Click to expand...
Click to collapse
Are you using the right flashtool? this one:
http://www.flashtool.net/index.php
And ftf files are flashed in flashmode. Same steps as fastboot, but with volume down instead.
You must also install drivers for the tablet on your Windows PC... *twiddling thumbs*...
Ok thanks ill try it when i come home
Hi everyone,
I bought Lenovo A806 from china and wanted to clear the android so I flashed bootloader. After flashing with SP flash tool, phone cannot start.
If I connect it to PC with or without battery, it looks like PC find some device, but in about 30 seconds, it disconnect it and connect again. If I try to flash again, SP tool cannot find the phone.
I don't want to send it to china again, so if someone have any idea, it would be very helpful.
Thank you and Merry Christmas
format again with manual option don't use auto.
same issue
Martasdx said:
Hi everyone,
I bought Lenovo A806 from china and wanted to clear the android so I flashed bootloader. After flashing with SP flash tool, phone cannot start.
If I connect it to PC with or without battery, it looks like PC find some device, but in about 30 seconds, it disconnect it and connect again. If I try to flash again, SP tool cannot find the phone.
I don't want to send it to china again, so if someone have any idea, it would be very helpful.
Thank you and Merry Christmas
Click to expand...
Click to collapse
Same problem here with my phone, you got any solution?
please tell me if you fixed it
---------- Post added at 12:53 AM ---------- Previous post was at 12:46 AM ----------
abgnokia said:
format again with manual option don't use auto.
Click to expand...
Click to collapse
can you elaborate, about addresses ?
I fix it. Try to connect your phone without battery. It will connect with proper drivers (ADB) and you are able to flash bootloader and ROM.
Hey there I'm having the same problem - every time I run flash tool hit download and connect the phone, nothing happens.
I've tried connecting without battery but doesn't seem to make a difference. When phone is on I can connect the phone and is recognised fine but when I turn it off and connect I can hear it connect and then disconnect after 20sec approx.
Please could you give step by step how you got this to work plzzzzzzzz
Thanks
Martasdx said:
I fix it. Try to connect your phone without battery. It will connect with proper drivers (ADB) and you are able to flash bootloader and ROM.
Click to expand...
Click to collapse
Can you share bootloader file for Lenovo A806. Thanks
You can download it here: http://www.needrom.com/download/vibe-ui-2-0-1508-st-multilanguage-deodex/ or browse roms or bootloaders in parent folder.
Step without battery is simple:
unplug phone from PC
install PC drivers
remove battery
connect with USB to PC
After that you should heart sound indication your phone was recognized by PC and You can install bootloader
link of file for Lenovo A806. Thanks
Can you share bootloader and driver file for Lenovo A806. Thanks
Same here..Encounter bootloop after flash official Fw from needrom after search for tutorial..Now stuck on boot with TOOL DL Image fail...Anyone can help??
---------- Post added at 11:10 PM ---------- Previous post was at 10:53 PM ----------
feez909 said:
Same here..Encounter bootloop after flash official Fw from needrom after search for tutorial..Now stuck on boot with TOOL DL Image fail...Anyone can help??
Click to expand...
Click to collapse
Hi..Problem solve..
I try use SP Flash tool 5.14 instead of 5.16.
Found preloader solve.Now able to boot to ROM.Thanks
Hi there, I after trying to flash twrp to my a806 I got stuck with TOOL DL Image fail. I tried sp v5.14,5.16 and 3.something.
Nothing seems to work. Any suggestions.
Sent from my 620G using Tapatalk
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Living4God1991 said:
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Click to expand...
Click to collapse
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
On the unresponsive part, if you have uninstalled the app and it is still unresponsive, try factory resetting the phone. This method involves turning off the phone, holding down the Volume Down button, while holding down the vol down button press and hold the power button until one second after the phone has turned on. While holding down the vol down button, press the power button a couple more times until the factory reset screen comes up. Use Vol up and down to scroll and power button to select.
I am bad at explaining things, so sorry if you do not understand.
Hope this helps!
Xsavi said:
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
Hope this helps!
Click to expand...
Click to collapse
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Living4God1991 said:
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Click to expand...
Click to collapse
I don't think doing what that link says will even work. ADV can't seem to detect my phone when I plug it in. My computer makes a sound like there was a device plugged in, but I can't do anything with it. I'm glad I have insurance on this phone. Hopefully getting a replacement won't be too hard.
Lg up and uppercut with the firmware/kdz of the aristo 2 may fix it. Never use one click roots unless its off XDA and even then be careful with links. Also that link xsavi posted should work just make sure to follow the steps.
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Lg aristo 2
Can anybody help me with rooting an LG aristo 2 i dont have a pc all i have is a chromebook
LG Aristo 2 qualcomm 9008 unbrick
my aristo 2 super hard bricked ...only shows up QDL 9008 in device manager and won't boot..completely unresponsive. Is there any fix? I've tried extsd card method to no avail. Please help.
Living4God1991 said:
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Click to expand...
Click to collapse
Do you still have the phone?
LG Aristo 2 qualcomm 9008 unbrick
NonStickAtom785 said:
Do you still have the phone?
Click to expand...
Click to collapse
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Tesh3180 said:
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Click to expand...
Click to collapse
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
NonStickAtom785 said:
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
Click to expand...
Click to collapse
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
Click to expand...
Click to collapse
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Click to expand...
Click to collapse
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Tesh3180 said:
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Click to expand...
Click to collapse
I wish I could help you there but all I have is 1.8 GB Chromebook. Very crappy. I'll PM some people to see if I can get an ADB dump for you:fingers-crossed:.
Sent from my LGE LM-X210(G) using XDA Labs
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Ah.Pook said:
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Click to expand...
Click to collapse
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
NonStickAtom785 said:
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
Click to expand...
Click to collapse
Yes, I believe so, I sure will try it. I didn't get one off the dump from LGUP
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Is the phone in bootloader mode? Make sure it is because it might be just in a bootloop.
nkomarn said:
Is the phone in bootloader mode? Make sure it is because it might be just in a bootloop.
Click to expand...
Click to collapse
No, I did not know before but the bootloader is locked and the phone is not booting at all.
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Spoiler: What I'm going to say won't help you!
I've had that myself! The micro-USB slot on your phone is possibly damaged. For getting that fixed, you'll either have to quickly push in the USB cable and hold it there for a while until it is detected. The sad thing is, if pushing in the USB cable in any way doesn't help then the way to go is some service.
If you're lucky enough, then it may indeed be a driver issue. Please share your OS version and your architecture so that I could be of some more help - other than scaring you!
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
ashrafuzzaman16 said:
Hello I have a chinese Huawei TAG-TL00 phone which I bricked by flashing wrong ROM. Now I have the correct flash file but my phone keeps disconnecting and reconnecting when connect it via USB. In SP flash tool after I click download and connect my phone after 4 seconds the phone disconnects automatically. I have tried numerous MTK drivers and also change USB cable, port and PC too. Nothing has worked. Please help me!!!
Click to expand...
Click to collapse
Wait wait wait - have you installed the VCOM drivers?
BusinessKid said:
Spoiler: What I'm going to say won't help you!
I've had that myself! The micro-USB slot on your phone is possibly damaged. For getting that fixed, you'll either have to quickly push in the USB cable and hold it there for a while until it is detected. The sad thing is, if pushing in the USB cable in any way doesn't help then the way to go is some service.
If you're lucky enough, then it may indeed be a driver issue. Please share your OS version and your architecture so that I could be of some more help - other than scaring you!
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
Wait wait wait - have you installed the VCOM drivers?
Click to expand...
Click to collapse
Android 5 and ARM MT6753T @ 1.50 GHz 1 processor, 8 coresARM implementer 65 variant 0 part 3331 revision 4 and yes I did install numerous VCOM drivers even updated manually in the few seconds the phone keeps connected.