Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Living4God1991 said:
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Click to expand...
Click to collapse
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
On the unresponsive part, if you have uninstalled the app and it is still unresponsive, try factory resetting the phone. This method involves turning off the phone, holding down the Volume Down button, while holding down the vol down button press and hold the power button until one second after the phone has turned on. While holding down the vol down button, press the power button a couple more times until the factory reset screen comes up. Use Vol up and down to scroll and power button to select.
I am bad at explaining things, so sorry if you do not understand.
Hope this helps!
Xsavi said:
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
Hope this helps!
Click to expand...
Click to collapse
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Living4God1991 said:
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Click to expand...
Click to collapse
I don't think doing what that link says will even work. ADV can't seem to detect my phone when I plug it in. My computer makes a sound like there was a device plugged in, but I can't do anything with it. I'm glad I have insurance on this phone. Hopefully getting a replacement won't be too hard.
Lg up and uppercut with the firmware/kdz of the aristo 2 may fix it. Never use one click roots unless its off XDA and even then be careful with links. Also that link xsavi posted should work just make sure to follow the steps.
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Lg aristo 2
Can anybody help me with rooting an LG aristo 2 i dont have a pc all i have is a chromebook
LG Aristo 2 qualcomm 9008 unbrick
my aristo 2 super hard bricked ...only shows up QDL 9008 in device manager and won't boot..completely unresponsive. Is there any fix? I've tried extsd card method to no avail. Please help.
Living4God1991 said:
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Click to expand...
Click to collapse
Do you still have the phone?
LG Aristo 2 qualcomm 9008 unbrick
NonStickAtom785 said:
Do you still have the phone?
Click to expand...
Click to collapse
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Tesh3180 said:
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Click to expand...
Click to collapse
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
NonStickAtom785 said:
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
Click to expand...
Click to collapse
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
Click to expand...
Click to collapse
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Click to expand...
Click to collapse
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Tesh3180 said:
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Click to expand...
Click to collapse
I wish I could help you there but all I have is 1.8 GB Chromebook. Very crappy. I'll PM some people to see if I can get an ADB dump for you:fingers-crossed:.
Sent from my LGE LM-X210(G) using XDA Labs
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Ah.Pook said:
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Click to expand...
Click to collapse
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
NonStickAtom785 said:
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
Click to expand...
Click to collapse
Yes, I believe so, I sure will try it. I didn't get one off the dump from LGUP
Related
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
Problem Description
1.LG G2 stuck at boot logo.
2.Cannot enter download Mode
3.Stuck at factory reset screen (factory reset processing) and cannot enter RECOVERY
4.cannot enter fastboot mode
5.Phone not detecting in your computer either windows or linux!
6.Cannot enter qhsusb mode.
7.Gone to service centre and they said to replace motherboard and u hav no warranty!
[ As stated by dear friend kryptonite
THIS METHOD WONT WORK IF YOU ARE STUCK IN QDLOADER 9008 MODE.(PHONE CONNECTED TO PC SHOWS SERIAL PORT).
(For you guys,there seems to be no options as of now.You will have to replace motherboard or wait for JTAG support.IF any of you need me to try to find a method you are welcome to sent your device to me so i can check it out.) ]
This can occur when flashing wrong images to the partitions when in qhsusb mode.
IF YOU CAN ENTER QHSUSB MODE [BLACK SCREEN BOOT] THEN FOLLOW THIS TUTORIAL
http://forum.xda-developers.com/show....php?t=2582142
Only solution for you guys is the following..
[THIS SOLUTION IS EASY BUT NEEDS YOU TO MESS WITH THE MOTHERBOARD.BUT SOLUTION DOESNOT REQUIRE HARDWARE SERVICE SKILLS.THE ONLY OTHER SOLUTION FOR YOU GUYS IS TO CHANGE THE MOTHERBOARD.SO THIS WIL BE YOUR ONLY CHOICE.]
1. For that you have to contact me...........
dear op, i have d802. my foolishness, i flashed d800 software on it.now it stuck in boot loop.i can factory reset the phone but of no use. phone can be booted in download mode but it is not detected by pc.although it is detected by windows when in boot loop, lg android net modem all shows but in download mode, nothing is detected.
as it is not detected in download mode, i can not flash anything.it is also not detected in ubuntu.
need help and advice regarding this what to do now.
hahmad78 said:
dear op, i have d802. my foolishness, i flashed d800 software on it.now it stuck in boot loop.i can factory reset the phone but of no use. phone can be booted in download mode but it is not detected by pc.although it is detected by windows when in boot loop, lg android net modem all shows but in download mode, nothing is detected.
as it is not detected in download mode, i can not flash anything.it is also not detected in ubuntu.
need help and advice regarding this what to do now.
Click to expand...
Click to collapse
The next step I'd try is using a different computer if possible. I've had similar issues before, but it turns out my old laptop just didn't like my phone.
shubh2007 said:
[ As stated by dear friend kryptonite
THIS METHOD WONT WORK IF YOU ARE STUCK IN QDLOADER 9008 MODE.(PHONE CONNECTED TO PC SHOWS SERIAL PORT).
(For you guys,there seems to be no options as of now.You will have to replace motherboard or wait for JTAG support.IF any of you need me to try to find a method you are welcome to sent your device to me so i can check it out.) ]
This can occur when flashing wrong images to the partitions when in qhsusb mode.
I.
Click to expand...
Click to collapse
Just FYI - this is an incorrect statement. I myself had a QHUSB 9008 error and it was fixed REMOTELY (using TeamViewer) using a special software called BoardDiag by some members on this board (like Tungkick). It does cost 20-30$ though, but the G2 is one of the most repairable phones I have seen
asdfvtn said:
The next step I'd try is using a different computer if possible. I've had similar issues before, but it turns out my old laptop just didn't like my phone.
Click to expand...
Click to collapse
have tried 3 different pc, windows xp, 7 32 bit, 64 bit, even 12.10 ubuntu
---------- Post added at 10:42 PM ---------- Previous post was at 10:34 PM ----------
i tried to go for short capacitor method too, but as i attach data cable, pc detecte lg virtual modem and lg blue tooth modem. confused what to do now
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
This Thread dedicated to LG V10 VS990 variant only, I may add another threads for other variants soon.
If you tried to downgrade your VS990 to lower version or flashed with wrong firmware, Chances you stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your VS990 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: VS9902AA with Fixed GPT modified Error.
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version VS9902AA (recommended), You can download it from here.
Warning! Newbies Guide
Many users faced GPT Modified problem with bootloops after the unbrick process, if that's the case, You have to open your device and short the test point like its shown in the picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please follow this guide carefully.
1- You have to disassemble the phone: follow this guide
2- Using tweezers, Gently short the small resistor like shown in the image above to gnd (Ground), while you are doing that connect USB to PC, Wait few seconds you should see your device in Qualcomm mode, you can unshort now.
(Don't push too much on the resistor, you could brick it.)
3- Now, repeat the old process with new VS9902AA Unbrick-Qfil-Fix-GPT-Modified Qfil files.
4- If this method works, Please report quickly in the comments.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Greet thank's This work perfec
cheetzcell said:
Greet thank's This work perfec
Click to expand...
Click to collapse
Did u unbricked your device?
cheetzcell said:
Greet thank's This work perfec
Click to expand...
Click to collapse
Is this metode works? Bcz i have bricked H900 with VS990 Mainboard inside
---------- Post added at 12:31 AM ---------- Previous post was at 12:21 AM ----------
cranknet said:
This Thread is dedicated to LG V10 VS990 variant only, I may add another threads for other variants soon.
If you tried to downgrade your VS990 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your VS990 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: VS99029A - VS9902AA this is the latest version right now.
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version VS9902AA (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
How did u make qfil files, i will try to help you make qfil file from another kdz version. The lollipop one.
petriandra said:
Is this metode works? Bcz i have bricked H900 with VS990 Mainboard inside
---------- Post added at 12:31 AM ---------- Previous post was at 12:21 AM ----------
How did u make qfil files, i will try to help you make qfil file from another kdz version. The lollipop one.
Click to expand...
Click to collapse
Try with VS9902AA version, if it doesn't work, You may try with H90021w unbrick files in V10 At&T section.
It will work, but you will face problems like security settings stopped, no hotspot.... I recommend you to use it as a last resort.
cranknet said:
Try with VS9902AA version, if it doesn't work, You may try with H90021w unbrick files in V10 At&T section.
It will work, but you will face problems like security settings stopped, no hotspot.... I recommend you to use it as a last resort.
Click to expand...
Click to collapse
Hi cranknet,
The qfil completed successfully. I removed the battery and put it back again. Plugged the USB cable with vol up pressed, kept it pressed for another 10-15 seconds, then released it. Nothing! I repeated the unplugging and plugging process. Nothing. Before qfil I was in Qualcomm mode. Now there's nothing. It's still plugged in for the past 10 mins. I don't know if this is normal. Anyway LGUP is not recognizing anything either. Did I miss something?
Thanks.
Update: After about 15 mins the phone booted with the LG Life's Good logo. I guess the battery must have been empty and after it charged some, it booted. Anyway, now it's in an unending bootloop. I disconnected from PC and again connected with volume up, after some vibration it gives a "790 GPT modified: 3" message on top left and then goes in bootloop. LGUP still doesn't recognize the phone (neither does it show now in device manager). But at least I am glad now that my phone shows some signs of life. With a little help it should be back to complete normalcy. Waiting for guidance.
Thanks.
pricksharp said:
Hi cranknet,
The qfil completed successfully. I removed the battery and put it back again. Plugged the USB cable with vol up pressed, kept it pressed for another 10-15 seconds, then released it. Nothing! I repeated the unplugging and plugging process. Nothing. Before qfil I was in Qualcomm mode. Now there's nothing. It's still plugged in for the past 10 mins. I don't know if this is normal. Anyway LGUP is not recognizing anything either. Did I miss something?
Thanks.
Update: After about 15 mins the phone booted with the LG Life's Good logo. I guess the battery must have been empty and after it charged some, it booted. Anyway, now it's in an unending bootloop. I disconnected from PC and again connected with volume up, after some vibration it gives a "790 GPT modified: 3" message on top left and then goes in bootloop. LGUP still doesn't recognize the phone (neither does it show now in device manager). But at least I am glad now that my phone shows some signs of life. With a little help it should be back to complete normalcy. Waiting for guidance.
Thanks.
Click to expand...
Click to collapse
What Qfil u use?
petriandra said:
What Qfil u use?
Click to expand...
Click to collapse
The one provided here by cranknet in this thread. I uninstalled all previous versions and drivers including qualcomm, lg usb, etc. But I guess it was not an issue. Qfil completed successfully. Or didn't it?
Thanks.
V10 H901 w/ vs990 now in bootloop
Alright. I followed cranknet's every step in detail. I used only the files downloaded from the op. My qfil was successful on all counts. It all took not more than 5 mins. I saved the log and I can see there was not a single error. Yet. When I rebooted with volume up, it went in a bootloop instead of the download mode. I get a a "790 GPT modified: 3" before the lg logo appears and keeps on bootlooping then on. Any idea what it all means?
Thanks.
pricksharp said:
The one provided here by cranknet in this thread. I uninstalled all previous versions and drivers including qualcomm, lg usb, etc. But I guess it was not an issue. Qfil completed successfully. Or didn't it?
Thanks.
Click to expand...
Click to collapse
I will try tonight with qfil that i made from VS990_11B kdz, i'll let you guys know soon. Hope it will works
pricksharp said:
Hi cranknet,
The qfil completed successfully. I removed the battery and put it back again. Plugged the USB cable with vol up pressed, kept it pressed for another 10-15 seconds, then released it. Nothing! I repeated the unplugging and plugging process. Nothing. Before qfil I was in Qualcomm mode. Now there's nothing. It's still plugged in for the past 10 mins. I don't know if this is normal. Anyway LGUP is not recognizing anything either. Did I miss something?
Thanks.
Update: After about 15 mins the phone booted with the LG Life's Good logo. I guess the battery must have been empty and after it charged some, it booted. Anyway, now it's in an unending bootloop. I disconnected from PC and again connected with volume up, after some vibration it gives a "790 GPT modified: 3" message on top left and then goes in bootloop. LGUP still doesn't recognize the phone (neither does it show now in device manager). But at least I am glad now that my phone shows some signs of life. With a little help it should be back to complete normalcy. Waiting for guidance.
Thanks.
Click to expand...
Click to collapse
is there any battery logo or sign while u charging the phone, for 15 minits before the logo come out
petriandra said:
is there any battery logo or sign while u charging the phone, for 15 minits before the logo come out
Click to expand...
Click to collapse
No. If I plug it into the charger or to the laptop through USB, the bootloop begins even if I haven't pressed any keys. Then I must take the battery off to stop it.
Now if you mean, if I did get any sign when my phone was supposedly charging when I first booted my phone after qfil? Then no. There was nothing. The screen was blank and dead as a dodo. Or the way it was since the LGUP MM update a month ago. I waited 10 minutes then replied on this thread about it and 5 minutes later the lg logo came up and the bootloop started. I unplugged it from the laptop, removed the battery, put it back in, pressed the vol Up and plugged the USB into my laptop. "790 GPT modified: 3" and bootloop goes on and on again.
Thanks.
Twiddling my thumbs. I've been at it for the past 12 hours straight. The qfil was successfully completed in the first five minutes. Rest of the time I thought - any moment now till someone responds with the solution. Tired. Taking a nap. I have put the mail notification on and I'll be up the moment I receive a response from xda.
pricksharp said:
Twiddling my thumbs. I've been at it for the past 12 hours straight. The qfil was successfully completed in the first five minutes. Rest of the time I thought - any moment now till someone responds with the solution. Tired. Taking a nap. I have put the mail notification on and I'll be up the moment I receive a response from xda.
Click to expand...
Click to collapse
im also waiting please i have almost lost all hope because my pc cant recognize my phone anymore
pricksharp said:
Hi cranknet,
The qfil completed successfully. I removed the battery and put it back again. Plugged the USB cable with vol up pressed, kept it pressed for another 10-15 seconds, then released it. Nothing! I repeated the unplugging and plugging process. Nothing. Before qfil I was in Qualcomm mode. Now there's nothing. It's still plugged in for the past 10 mins. I don't know if this is normal. Anyway LGUP is not recognizing anything either. Did I miss something?
Thanks.
Update: After about 15 mins the phone booted with the LG Life's Good logo. I guess the battery must have been empty and after it charged some, it booted. Anyway, now it's in an unending bootloop. I disconnected from PC and again connected with volume up, after some vibration it gives a "790 GPT modified: 3" message on top left and then goes in bootloop. LGUP still doesn't recognize the phone (neither does it show now in device manager). But at least I am glad now that my phone shows some signs of life. With a little help it should be back to complete normalcy. Waiting for guidance.
Thanks.
Click to expand...
Click to collapse
after flash the right files from kdz phone should enter dl mode if wrong files flashed with qfil phone will not show any sign of life then you need to short test points to put it in qualcomm mode again
samy2015 said:
after flash the right files from kdz phone should enter dl mode if wrong files flashed with qfil phone will not show any sign of life then you need to short test points to put it in qualcomm mode again
Click to expand...
Click to collapse
Samy, as you know, my phone was hard bricked and was in Qualcomm mode for over a month. After this qfil flash I'm at least getting the LG logo. I thought this was a good development. A bootloop doesn't seem as hopeless as a cold hardbrick. Isn't this a good sign? Do I surely need to short test points? I will definitely if it's necessary.
Thanks.
samy2015 said:
after flash the right files from kdz phone should enter dl mode if wrong files flashed with qfil phone will not show any sign of life then you need to short test points to put it in qualcomm mode again
Click to expand...
Click to collapse
what is the right pin for test point for v10? any pictures?
---------- Post added at 02:54 AM ---------- Previous post was at 02:34 AM ----------
Try the qfil last night, ended with success status, but phone become dead. No bootloop, no logo, no qualcomm mode. Already tried the to short test point, nothing happend. Duh... epic fail
petriandra said:
what is the right pin for test point for v10? any pictures?
---------- Post added at 02:54 AM ---------- Previous post was at 02:34 AM ----------
Try the qfil last night, ended with success status, but phone become dead. No bootloop, no logo, no qualcomm mode. Already tried the to short test point, nothing happend. Duh... epic fail
Click to expand...
Click to collapse
Hello cranknet we are counting on you please help us let us know if there is no hope thank you... is there any way we can get our phones to qualcomm 9008 mode again
cranknet said:
This Thread is dedicated to LG V10 VS990 variant only, I may add another threads for other variants soon.
If you tried to downgrade your VS990 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your VS990 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: VS99029A - VS9902AA this is the latest version right now.
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version VS9902AA (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
Question. Should I uninstall all drivers, including the universal Google device drivers BEFORE installing the Qualcomm drivers?
kofi26 said:
Hello cranknet we are counting on you please help us let us know if there is no hope thank you... is there any way we can get our phones to qualcomm 9008 mode again
Click to expand...
Click to collapse
Samy2015 from the successful V10 f600l unbrick thread suggests test pin shorting to get back to the Qualcomm 9008 mode again. I will definitely do it but I am waiting for cranknet for his view on might have gone wrong with this. Mine was hard bricked due to the update and now on bootloop after this qfil unbrick.
---------- Post added at 06:18 AM ---------- Previous post was at 06:02 AM ----------
petriandra said:
what is the right pin for test point for v10? any pictures?
---------- Post added at 02:54 AM ---------- Previous post was at 02:34 AM ----------
Try the qfil last night, ended with success status, but phone become dead. No bootloop, no logo, no qualcomm mode. Already tried the to short test point, nothing happend. Duh... epic fail
Click to expand...
Click to collapse
Following are the links in which the test pin shorting is vividly demonstrated. But just the shorting. I won't go further as the rest is for non-vs990 motherboards.
http://www.aryk.tech/2017/11/lg-v10-hardbricked-unbrick-solution.html
https://forum.xda-developers.com/showpost.php?p=73004040&postcount=2
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
have you tried ADB??
santiagoruel13 said:
have you tried ADB??
Click to expand...
Click to collapse
Not yet.. but can’t get in fastboot mode, so that’s not possible I think
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
santiagoruel13 said:
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
Click to expand...
Click to collapse
Yes, the phone won’t boot to fastboot mode with arrow up and power button. Will try it with laptop later today..
Fastboot mode is volume down button + power button.
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
KabalLV said:
Fastboot mode is volume down button + power button.
Click to expand...
Click to collapse
Both not working, - and +.
santiagoruel13 said:
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
Click to expand...
Click to collapse
Not working.. device isn’t recognized in cmd
Bjarnie said:
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
Click to expand...
Click to collapse
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
ayush2901 said:
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
Click to expand...
Click to collapse
See the results.. unf not working.
Sydtek said:
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Try to google the error's and see what you can find out about them.
Bjarnie said:
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Click to expand...
Click to collapse
Did you solved this? i have the same problem
alanleonardi said:
Did you solved this? i have the same problem
Click to expand...
Click to collapse
Are you using Intel or AMD Ryzen PC? Use Intel PC and use Miflash to flash the stock ROM.
hi
did you solve your problem? i have the same issue and no one can fix it
i have exactly the same problem with poco f1 and unfortunately no one knows what is these errors
some says it is because authorized account but when authorizes account be needed its error appear wile flashing not error of cannot receive hello pocket or can not read com port
I think it happpened because of wrong firmware? I already experienced this to my son's bricked tablet. which is LG Gpad v400 i flashed the wrong firmware which firmware of Gpad V410 and end up to bricked tablet. I think the only solution for that is jtag. Try to Search for pocophone jtag.
HELLO PACKETS ERROR
happened to me with Redmi3s
i tried possibly everything related to DRIVERS, ROMS, MIFLASHER VERSIONS, FASTBOOT ROM VERSION , STORED THEM IN SAPERATE LOCATION WITH SMALLER NAMES, TRIED ON TWO DIFFERENT PC (WIN10 / WIN7,) USED DIFFERENT CABLES, TRIED QUALCOME QLOADER METHOD
USING BLADE, I CUT THE GLUE AND OPENED THE PANEL BEHIND, used TEST POINT SHORT CIRCUIT METHOD , REMOVED BATTERY AND CHARGED OVERNIGHT
BUT
redmi3s NEVER resuscitated ...