Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
have you tried ADB??
santiagoruel13 said:
have you tried ADB??
Click to expand...
Click to collapse
Not yet.. but can’t get in fastboot mode, so that’s not possible I think
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
santiagoruel13 said:
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
Click to expand...
Click to collapse
Yes, the phone won’t boot to fastboot mode with arrow up and power button. Will try it with laptop later today..
Fastboot mode is volume down button + power button.
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
KabalLV said:
Fastboot mode is volume down button + power button.
Click to expand...
Click to collapse
Both not working, - and +.
santiagoruel13 said:
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
Click to expand...
Click to collapse
Not working.. device isn’t recognized in cmd
Bjarnie said:
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
Click to expand...
Click to collapse
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
ayush2901 said:
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
Click to expand...
Click to collapse
See the results.. unf not working.
Sydtek said:
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Try to google the error's and see what you can find out about them.
Bjarnie said:
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Click to expand...
Click to collapse
Did you solved this? i have the same problem
alanleonardi said:
Did you solved this? i have the same problem
Click to expand...
Click to collapse
Are you using Intel or AMD Ryzen PC? Use Intel PC and use Miflash to flash the stock ROM.
hi
did you solve your problem? i have the same issue and no one can fix it
i have exactly the same problem with poco f1 and unfortunately no one knows what is these errors
some says it is because authorized account but when authorizes account be needed its error appear wile flashing not error of cannot receive hello pocket or can not read com port
I think it happpened because of wrong firmware? I already experienced this to my son's bricked tablet. which is LG Gpad v400 i flashed the wrong firmware which firmware of Gpad V410 and end up to bricked tablet. I think the only solution for that is jtag. Try to Search for pocophone jtag.
HELLO PACKETS ERROR
happened to me with Redmi3s
i tried possibly everything related to DRIVERS, ROMS, MIFLASHER VERSIONS, FASTBOOT ROM VERSION , STORED THEM IN SAPERATE LOCATION WITH SMALLER NAMES, TRIED ON TWO DIFFERENT PC (WIN10 / WIN7,) USED DIFFERENT CABLES, TRIED QUALCOME QLOADER METHOD
USING BLADE, I CUT THE GLUE AND OPENED THE PANEL BEHIND, used TEST POINT SHORT CIRCUIT METHOD , REMOVED BATTERY AND CHARGED OVERNIGHT
BUT
redmi3s NEVER resuscitated ...
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Hey guys,
I am new to Xiaomi Devices, Just got a Redmi Note 3 Snapdragon variant from India. Let me get to the issue at hand. I have tried to get to EDL mode and i have been successful, but the issue is that the device is then not staying in EDL mode, but rather its rebooting after 5 or 6 secs of EDL mode. Is there any way to solve this?
Please note : Using Windows 10 , MIUI 7 latest Stable version.
Is there any one who can help me out?
shyam2010 said:
Is there any one who can help me out?
Click to expand...
Click to collapse
How are you booting to EDL mode?
stephendt0 said:
How are you booting to EDL mode?
Click to expand...
Click to collapse
I am booting to EDL mode by following these steps.
Shut down phone - then volume down + power to fastboot - then connect to PC - Then boot to EDL by double clicking a .bat file in my pc
everything goes well and boots to EDL mode - led blinks for 5 - 6 times, then mi logo appears, phone has shut down automatically
Beats me..! Tried another pc?
stephendt0 said:
Beats me..! Tried another pc?
Click to expand...
Click to collapse
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
shyam2010 said:
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
Click to expand...
Click to collapse
ever resolve this?
uh, well.. i just hard-bricked my tablet while trying to flash the stock rom, if i long press the power button nothing happens, for example. i dont know what to do... before this i did a full backup through twrp, can that save me or is this dead forever? the software i used was SP Flast Tool and all the drivers needed.
DarkAlpha.Sete said:
uh, well.. i just hard-bricked my tablet while trying to flash the stock rom, if i long press the power button nothing happens, for example. i dont know what to do... before this i did a full backup through twrp, can that save me or is this dead forever? the software i used was SP Flast Tool and all the drivers needed.
Click to expand...
Click to collapse
Try to boot your Android in recovery mode. You can recover it from backup in recovery mode. If your Android not starting anyways then may be you corrupted your Android bootloader.
Ashwinrg said:
Try to boot your Android in recovery mode. You can recover it from backup in recovery mode. If your Android not starting anyways then may be you corrupted your Android bootloader.
Click to expand...
Click to collapse
the problem is: I can't do anything... it doesn't even turn on the light when its charging... I can't even make the logo appear
Then how do I fix the corrupted boot loader?
DarkAlpha.Sete said:
the problem is: I can't do anything... it doesn't even turn on the light when its charging... I can't even make the logo appear
Then how do I fix the corrupted boot loader?
Click to expand...
Click to collapse
Install mediatek vcom USB drivers to your computer. Press power button and either volume up and down button. See if your tablet detects in meta mode(preloader USB vcom port) on your computer device manager. If it detects in meta mode then flash your tablet stock ROM using SP flash tool.
Ashwinrg said:
Install mediatek vcom USB drivers to your computer. Press power button and either volume up and down button. See if your tablet detects in meta mode(preloader USB vcom port) on your computer device manager. If it detects in meta mode then flash your tablet stock ROM using SP flash tool.
Click to expand...
Click to collapse
That worked... Its working(again) Sorry but this time I can't give you a thanks, I figured how to solve this alone, before you posted that
Lenovo Yoga 8 B600-f stuck in downloading using spflash tool
i tried different ways to fix this error but nothing can do with this
---------- Post added at 01:58 PM ---------- Previous post was at 01:51 PM ----------
how can i fix this
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
adithyan25 said:
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
Click to expand...
Click to collapse
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
asett3 said:
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
Click to expand...
Click to collapse
Press power button about 10-20 seconds
[email protected] said:
Press power button about 10-20 seconds
Click to expand...
Click to collapse
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
asett3 said:
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
Click to expand...
Click to collapse
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
adithyan25 said:
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
Click to expand...
Click to collapse
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
bigbrother69 said:
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
Click to expand...
Click to collapse
But my pc is detecting Qualcomm HS-USB QDLoadar 9008 and i can flash via mi flashtool.
asett3 said:
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Click to expand...
Click to collapse
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
adithyan25 said:
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
Click to expand...
Click to collapse
Same not powering on aftr successful flash
Please Help someone
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
bigbrother69 said:
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
Click to expand...
Click to collapse
tried gave it to service center!
mobile pc co conect rakho apne aap reboot ho jayega automatic
Bro plz tell me ur contact number nd my number 7340329575 plz call me im helf u
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
Bro tell me ur contact number nd my contact number 7340329575 plz call me my number im helf u
Did u find any solution?
I have also experiencing this problem. Back in MIUI 8, when I'm totally running out of battery, the phone won't charge or getting into any mode
Try to
"Hold Vol- + Connect the phone to PC USB Slot"
Let me know if it works
Try TWRP flashing
As you said that the mi flash tool is detecting your phone so try flashing the twrp recovery by the edl method and then you can flash the rom
Refer this link for Flashing TWRP
youtu.be/rCONN1_IPuU(please add https:// before the link )
And after flashing process is done and of you are unable to access the internal storage then complete wipe the internal storage and you are good to go
Just disconnect battery, connect EDL cable (deep flash cable with pressed button), run MiFlash and flash the phone.
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Living4God1991 said:
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Click to expand...
Click to collapse
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
On the unresponsive part, if you have uninstalled the app and it is still unresponsive, try factory resetting the phone. This method involves turning off the phone, holding down the Volume Down button, while holding down the vol down button press and hold the power button until one second after the phone has turned on. While holding down the vol down button, press the power button a couple more times until the factory reset screen comes up. Use Vol up and down to scroll and power button to select.
I am bad at explaining things, so sorry if you do not understand.
Hope this helps!
Xsavi said:
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
Hope this helps!
Click to expand...
Click to collapse
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Living4God1991 said:
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Click to expand...
Click to collapse
I don't think doing what that link says will even work. ADV can't seem to detect my phone when I plug it in. My computer makes a sound like there was a device plugged in, but I can't do anything with it. I'm glad I have insurance on this phone. Hopefully getting a replacement won't be too hard.
Lg up and uppercut with the firmware/kdz of the aristo 2 may fix it. Never use one click roots unless its off XDA and even then be careful with links. Also that link xsavi posted should work just make sure to follow the steps.
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Lg aristo 2
Can anybody help me with rooting an LG aristo 2 i dont have a pc all i have is a chromebook
LG Aristo 2 qualcomm 9008 unbrick
my aristo 2 super hard bricked ...only shows up QDL 9008 in device manager and won't boot..completely unresponsive. Is there any fix? I've tried extsd card method to no avail. Please help.
Living4God1991 said:
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Click to expand...
Click to collapse
Do you still have the phone?
LG Aristo 2 qualcomm 9008 unbrick
NonStickAtom785 said:
Do you still have the phone?
Click to expand...
Click to collapse
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Tesh3180 said:
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Click to expand...
Click to collapse
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
NonStickAtom785 said:
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
Click to expand...
Click to collapse
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
Click to expand...
Click to collapse
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Click to expand...
Click to collapse
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Tesh3180 said:
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Click to expand...
Click to collapse
I wish I could help you there but all I have is 1.8 GB Chromebook. Very crappy. I'll PM some people to see if I can get an ADB dump for you:fingers-crossed:.
Sent from my LGE LM-X210(G) using XDA Labs
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Ah.Pook said:
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Click to expand...
Click to collapse
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
NonStickAtom785 said:
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
Click to expand...
Click to collapse
Yes, I believe so, I sure will try it. I didn't get one off the dump from LGUP