NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
adithyan25 said:
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
Click to expand...
Click to collapse
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
asett3 said:
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
Click to expand...
Click to collapse
Press power button about 10-20 seconds
[email protected] said:
Press power button about 10-20 seconds
Click to expand...
Click to collapse
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
asett3 said:
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
Click to expand...
Click to collapse
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
adithyan25 said:
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
Click to expand...
Click to collapse
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
bigbrother69 said:
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
Click to expand...
Click to collapse
But my pc is detecting Qualcomm HS-USB QDLoadar 9008 and i can flash via mi flashtool.
asett3 said:
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Click to expand...
Click to collapse
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
adithyan25 said:
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
Click to expand...
Click to collapse
Same not powering on aftr successful flash
Please Help someone
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
bigbrother69 said:
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
Click to expand...
Click to collapse
tried gave it to service center!
mobile pc co conect rakho apne aap reboot ho jayega automatic
Bro plz tell me ur contact number nd my number 7340329575 plz call me im helf u
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
Bro tell me ur contact number nd my contact number 7340329575 plz call me my number im helf u
Did u find any solution?
I have also experiencing this problem. Back in MIUI 8, when I'm totally running out of battery, the phone won't charge or getting into any mode
Try to
"Hold Vol- + Connect the phone to PC USB Slot"
Let me know if it works
Try TWRP flashing
As you said that the mi flash tool is detecting your phone so try flashing the twrp recovery by the edl method and then you can flash the rom
Refer this link for Flashing TWRP
youtu.be/rCONN1_IPuU(please add https:// before the link )
And after flashing process is done and of you are unable to access the internal storage then complete wipe the internal storage and you are good to go
Just disconnect battery, connect EDL cable (deep flash cable with pressed button), run MiFlash and flash the phone.
Related
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
have you tried to re-install the Driver? make sure that you only use win 64 bit for flashing, many issues occurred when you try to flash using win 32 bit
I am using Windows 10 64 bit. Moreover, I have installed ADB drivers separately (although these seem to come with the Mi Flash utility too).
I think it's intended behavior not to be able to flash via Fastboot with the bootloader locked? I was hoping to be able to restore via Mi PC Suite but it can't seem to see the phone, although the computer does and Mi Flash does too.
try using Mi PC Suite, http://en.miui.com/thread-92720-1-1.html, After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash
"I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too)."
For some reason, Mi PC Suite is not detecting the phone.
Ultimatum99 said:
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
noersetiawan said:
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
Click to expand...
Click to collapse
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Ultimatum99 said:
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Click to expand...
Click to collapse
Hi,
Thank you for the help. Unfortunately it doesn't work straight away, fortunately this leads me to the right direction, after I tried to point the driver to Xiaomi directory, a window dialog says the driver is 32 bit thus noninstallable for my PC, then I looked around for 64 bit driver for Qualcomm, installed it. I can finally install the driver but the phone is detected as unknown USB device, after removing it from Device Manager, restarted my PC, and tried again, it's still the same, on the third try it finally detected properly. It's working now, thank you very much.
Really weird why did MiFlash comes with noninstallable driver.
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Garu8 said:
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Click to expand...
Click to collapse
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
jokerpappu said:
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
Click to expand...
Click to collapse
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Garu8 said:
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Click to expand...
Click to collapse
then you should buy a usb cable which has a button in it which forces xiaomi devices to boot into edl mode.i forgot its name but i think you can google to find it
jokerpappu said:
then you should buy a usb cable which has a button in it which forces xiaomi deveot into edl mode.i forgot its name but i think you can google to find it
Click to expand...
Click to collapse
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Garu8 said:
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Click to expand...
Click to collapse
i saw it on ebay also.i think that seller will ship worldwide to any country.
here is the link
http://www.ebay.com/sch/i.html?_fro...le.TRS0&_nkw=xiaomi+deep+flash+cable&_sacat=0
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
jazz452 said:
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
Click to expand...
Click to collapse
As I have already said edl mode won't work since developers option was not activated as edl requires oem activated. I had already tried all the methods.
By the way thanks to u all at xda as I have successfully flashed new rom using deep flash cable method...
Nexus 10 rooted in a bootloop
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Novice12 said:
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Click to expand...
Click to collapse
Hi,
This is Redmi 3 section. The correct section for your device is here. Please explain your issue there. Good luck!
Sent from my Redmi 3 using XDA Labs
Unbrick Xiaomi Redmi 3s prime with unlocked boot loader
Hi all,
I've a Xiaomi redmi 3s prime with rooted and unlocked bootloader. I tried unrooting from SuperSu and the phone is in bootloop now. I had TWRP recovery mod installed and a nandroid back up in my phone. But, I can't even enter the recovery mode now. Fast boot is working. Please help me to unbrick it without losing the data or recover the nandroid back up at least.
Thanks!!
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
look
you got bootloop and its very very different from brick
update your title
hey everyone, flashed the cwm recovery which i found someware and the source were saying the it meant for all devices. but npw my phone does not go to fastnoot nor to recovery mode.
But, whenever i connect it to pc the the red noti. red light blinks and device name qualcomm 900e shows up in device manager. also waiting for device in adb. is there any way to revive my phone???:crying: :crying:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
GNVM said:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
Click to expand...
Click to collapse
flashtool does not recognize the device.
also in adb there is no device in list?
jobangill99 said:
flashtool does not recognize the device.
also in adb there is no device in list?
Click to expand...
Click to collapse
Try miflash to flash a new rom. If this does not work, then remove the back panel of you phone and disconnect the battery cable. Watch video on youtube for help. After that leave the phone disconnected for 30 mins and then reconnect it. Press vol down and power and you should be able to enter fastboot mode.
If nothing works go for test point method. see videos for better understanding.
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Have you unlocked your bootloader yet?
Sent from my Redmi 3 using Tapatalk
GrimEire said:
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Click to expand...
Click to collapse
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
I just let windows find the driver and they do.it automatically if u have internet connection ok.why work hard when it can be simple
It has never worked for me, but if it works for you, no problem
Sent from my Redmi 3 using Tapatalk
haha maybe i am lucky
my computer for some reason just detected the phone the first time i connected to it a few days later.
im having bigger issues now as the flashing took forever after about 12 hours it was still flashing so i unplugged it.
now my phone is bricked i think.
when trying to turn on the phone it is stuck at the mi mi.com logo
it stays there for a few minutes and then vibrates and goes black and starts again.
i can get into fastboot (volume down and power) but cant get into anything else.
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-t...with-drivers-on-windows-quickest-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Redmi note4
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Hello,
My Redmi Note 4 got Bootlooped,No Recovery No Rom and no way for Charging while pressing and hold the power button,there appeared one second blink of MI Logo.i tried all the ways to flash thro' fast boot mode.but remote partition flashing is no allowed.while tried to flash in edl mode,mi flash didn't detect the Driver.On Seeing device manager the it shows Qualcomm HS-USB Diagnostics 900E and not as Qualcomm HS-USB qdloader 9008.while upading driver it shows the best driver already installed.In my opnion due to Qualcomm HS-USB Diagnostics 900E ,mi flash didn't detect the driver.how can i switched up to Qualcomm HS-USB qdloader 9008.
device not showing in miflash tool in edl mode..
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
in edl mode device not showing in miflash tool ...
ManishOutlook said:
in edl mode device not showing in miflash tool ...
Click to expand...
Click to collapse
Make sure you have all tye drivers of ur device installed on ur pc and also latest miflash tool and try again
You can try a different usb cable
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
gottlobzufall said:
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
Click to expand...
Click to collapse
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Max.Payne said:
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Click to expand...
Click to collapse
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
rekh said:
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
Click to expand...
Click to collapse
Deepflash cabe not needed, i used tespoint to forse in qualcomm hsxxx mode, device is present in device manager but flasher can't see him. I solved phone on the same way on another computer. First is win7-64, second is win10-64, same program, drivers, flash file... I don't know why... but problem is solved...
How long should it take? Mine is taking very long. And will there be sounds playing of device disconnected and connected again?
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Try to press power button at least 30 to 40 sec...or till u see mi logo
It's hard bricked I think
Sent from my LS-5010 using XDA-Developers mobile app
How can hard brick happen with miflash edl?
bhanuchowdary said:
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Click to expand...
Click to collapse
Connect to pc with usb cable and wait until battery fully discharged. And recharge it for 3 hours. and press power buton for 20-25 second it will open.
What does the windows device manager say when your phone is connected to the pc? If it has something like "900E" mode you need this http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928 . This helped me out as my phone was dead. It only works when your battery is not completely discharged.
If you have "9008" mode in device manager, you are really in the EDL mode. So it is no problem to flash an appropriate fastboot rom with mi flash tool. Maybe you need the latest beta from mi flash tool though.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
redminote3 said:
How can hard brick happen with miflash edl?
Click to expand...
Click to collapse
happend to me after i tried to unlock my bootloader. I put a modified bootloader to the rom that i wanted to flash. After that my phone was dead, had only HS USB 900E in device manager
Yeah i know that can happen on locked BL, but I thought on unlocked
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
smokinjoe2122 said:
Can you get into the bootloader to use fastboot? Does that much work? If not, you may be in trouble
Also, are you positive you have the MTK driver installed correctly? I remember there being driver verification issues with Win10.
Click to expand...
Click to collapse
Can not enter fastboot or recovery mode .. I am using win 7 64bit .. And for the mtk driver I've tried to install repeatedly from various sources and in various ways but the result is the same.
arilevint said:
Help me guys.. My RN4 mtk 3/64 MIUI Global 8.0.3.0 unlockbootloader suddently dead.. No led, no vibrate. My pc detect as mtk usb port..but connection not stable
.. Connect-disconnect repeatly. And SPFT can't work.. Can't format, can't readback, can't flash.. Always stuck at 100% red bar and ERROR : STATUS_DA_HASH_MISMATCH for rom miui 8 china or global stable.. And ERROR : STATUS_EXCEED_NUM_MAX for rom global dev and china dev..please give me solution :crying::crying:
Thanks..
Click to expand...
Click to collapse
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver/PC issue.
Sent from my Redmi Note 4 using Tapatalk
Wilderone said:
If your repeatedly getting disconnect/reconnect I would suggest you use another USB cable or USB port because that's not normal.
If not then it may be a driver issue.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Ok..I'm going to buy a new cable.
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Perhaps try downloading different firmware if you're getting a hash error?
I still think getting into fastboot is important...Since Official MIUI doesn't have a real recovery, you're better off installing TWRP and seeing if you can do something from within recovery.
arilevint said:
Still unresolved. I try memory test SPFT can run normally. Device manager detects as MediaTek DA vcom usb .. But if I format or flashing error message appears again .. STATUS_DA_HASH_MISMATCH.
Click to expand...
Click to collapse
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
subodhverma21 said:
Is your Rn4 a mtk device or snapdragon device???? Please check.
If it is mtk then u would require scatter file along with correct firmware.
And if it is a snapdragon device, u can flash most of the things through bootloader mode.
Hope it helps.
Click to expand...
Click to collapse
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
arilevint said:
Im sure my device xiaomi redmi note 4 mediatek 3/64gb with logo china mobile in back casing.
Click to expand...
Click to collapse
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one. http://spflashtool.com/
2. Get MediaTek USB VCOM drivers. http://spflashtool.com/
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions http://en.miui.com/thread-370620-1-1.html
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device. http://en.miui.com/download-309.html#454
Hope it helps.
Hi i have the same problem, spft always give me an error, i cannot enter in fastboot or recovery, did you solve the problem?
have you flashed preloader or had you selected "Format all and Download"? If not, or maybe yes,, try to flash custom cust.img and just plug in your phone without holding vol-down button. Also make sure that you disable driver signature enforcement. Anyway it sounds scary as I reflash my fastboot firmware on SP Flash Tool ocasionally after using twrp.
---------- Post added at 06:14 PM ---------- Previous post was at 06:12 PM ----------
If it doesn't work,, have a motherboard replacement
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
jr1945 said:
hello i managed to flash with sp flash tool but after flashing it is not charging and couldnt be powered on. i have held the power button for more than 20 secs
Click to expand...
Click to collapse
go to help at care centre buddy it look like a serious problem
subodhverma21 said:
Working with MTK devices is bit tricky.
though you will get success, i Hope
If you are sure that your device is MTK, then ofcourse your bootloader mode will not work. So try to adopt this solution:
1. Get SPFlash Tool, the latest one.
2. Get MediaTek USB VCOM drivers.
3. Now most important Get your Original Firmware along with the Scatter file. The SPflashtool only recognizes the scatter file. So you need ROM along with scatter file.
check this link and follow the instructions
check your ROM if it is here. Only Use the correct firmware for your devices otherwise you may do a permanent damage to your device.
Hope it helps.
Click to expand...
Click to collapse
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
chimouw said:
i stuck in (Vol -) ,( Vol - and power button )and plug in USB. red bar not appear in SP tool, why it happen? please help
Click to expand...
Click to collapse
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
subodhverma21 said:
are you able to go to VCOM mode?
you have to go to VCOM mode in the MTK device to use the SP Flash Tool.
1. Install Vcom drivers from internet.
2. Phone will get detected. Then the SP Flash Tool will Run
Hope it helps.
Click to expand...
Click to collapse
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
chimouw said:
I finally installed mediatek driver but it didn't give any progress, btw test point can work??
Click to expand...
Click to collapse
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
subodhverma21 said:
Do you have the scatter file?
where did you get the scatter file?
Which SPF tool are you working with?
Download the latest SPFT and then try.
hope it helps.
Click to expand...
Click to collapse
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
chimouw said:
I has scatter file from en. Miui /a-234 with codename nikel, I used spf tool the latest version.
Otherwise, my phone can not detected in my pc, neither unknown device or Vcom statuse. How should I do again? With test point or DFC can work??
Really my phone is Deep Death, before DD I flashed with snap dragon rom, result is DD
Click to expand...
Click to collapse
Have patience, it should not be problem.
Is your battery removable?
If yes, take it out. Unplug usb.
Plug usb again with battery out. Press -vol to detect vcom driver.
Most important , adb driver or usb debugging mode should not be enabled. Otheewise the vcom drivers will not install.
Once vcom mode works. SPFT will work on its own.
Hope it helps.