Related
So i made this DIY Deep Flash Cable using the copper wire method . First it connects. Once it connected as 8000 now its 900E .
When i install drivers it basically gives me error 10 Device Cannot Start.
BTW i have the blinking red light of death.
Any help?
Name your phone??!!
---------- Post added at 12:33 PM ---------- Previous post was at 12:24 PM ----------
Its not blinking red light of death. Its edl mode.
Just download the latest fastboot rom of latest miui version of you are using redmi note 3 from any site and make sure it is of .tgz extension and extract the file.
Disable device signature enforcement in your computer and connect the phone with your computer.
Open device manager on your computer and under ports section check if your phone is getting detected as 900E or something like that.
Download and install mi flash app from any site.
Now run the mi flash application and now connect your phone to the computer. After 10 seconds press the refresh button. Your phone would be seen as written 'comp' or 'com' on the mi flash app. Now from there browse to the folder where you extracted the fastboot rom and in the extracted files there would be a folder named image, just select that folder and press ok. Now click on flash.
Voila!! Your phone is now back.
Varun Sharda said:
Name your phone??!!
---------- Post added at 12:33 PM ---------- Previous post was at 12:24 PM ----------
Its not blinking red light of death. Its edl mode.
Just download the latest fastboot rom of latest miui version of you are using redmi note 3 from any site and make sure it is of .tgz extension and extract the file.
Disable device signature enforcement in your computer and connect the phone with your computer.
Open device manager on your computer and under ports section check if your phone is getting detected as 900E or something like that.
Download and install mi flash app from any site.
Now run the mi flash application and now connect your phone to the computer. After 10 seconds press the refresh button. Your phone would be seen as written 'comp' or 'com' on the mi flash app. Now from there browse to the folder where you extracted the fastboot rom and in the extracted files there would be a folder named image, just select that folder and press ok. Now click on flash.
Voila!! Your phone is now back.
Click to expand...
Click to collapse
Il try will update!
Nope , should i try testpoint?
your phone is redmi note 3 right? then try to reboot your phone in fastboot mode by holding volume down + power key untill it gives you the image of the mi bunny screwing with android bot. if this mode is opening then ur phone can be revive again dead sure. but if its blinking you have to make sure its in edl mode. just download adb driver from google search for your phone install it install your phones driver and connect it to the pc. if there is a device showing qloader 9008 something in device manager then your phone is alive and you can recover it by flashing the latest miui rom either global or developer via mi flash tool. your phone will be as good as new. just check it and msg if your phone is showing such indication i will help you to revive it.
No fastboot mode , no recovery , no MI logo
Does my flash detect ur device?
@Wardoge You can use deep flash method. You need special usb cable.
deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
how to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
Wardoge said:
So i made this DIY Deep Flash Cable using the copper wire method . First it connects. Once it connected as 8000 now its 900E .
When i install drivers it basically gives me error 10 Device Cannot Start.
BTW i have the blinking red light of death.
Any help?
Click to expand...
Click to collapse
If you have the blinking led of death then you can maybe just flash the ROM ?. Try it.
kounir said:
@Wardoge You can use deep flash method. You need special usb cable.
deep flash https://www.youtube.com/watch?v=uXai6PMmM7s
how to make deep flash cable https://www.youtube.com/watch?v=hmdrj4uX7gY
Click to expand...
Click to collapse
I will but later
Adarsh2000 said:
If you have the blinking led of death then you can maybe just flash the ROM ?. Try it.
Click to expand...
Click to collapse
I am not an edl mode also i don't have fastboot , nor recovery
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
adithyan25 said:
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
Click to expand...
Click to collapse
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
asett3 said:
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
Click to expand...
Click to collapse
Press power button about 10-20 seconds
[email protected] said:
Press power button about 10-20 seconds
Click to expand...
Click to collapse
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
asett3 said:
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
Click to expand...
Click to collapse
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
adithyan25 said:
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
Click to expand...
Click to collapse
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
bigbrother69 said:
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
Click to expand...
Click to collapse
But my pc is detecting Qualcomm HS-USB QDLoadar 9008 and i can flash via mi flashtool.
asett3 said:
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Click to expand...
Click to collapse
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
adithyan25 said:
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
Click to expand...
Click to collapse
Same not powering on aftr successful flash
Please Help someone
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
bigbrother69 said:
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
Click to expand...
Click to collapse
tried gave it to service center!
mobile pc co conect rakho apne aap reboot ho jayega automatic
Bro plz tell me ur contact number nd my number 7340329575 plz call me im helf u
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
Bro tell me ur contact number nd my contact number 7340329575 plz call me my number im helf u
Did u find any solution?
I have also experiencing this problem. Back in MIUI 8, when I'm totally running out of battery, the phone won't charge or getting into any mode
Try to
"Hold Vol- + Connect the phone to PC USB Slot"
Let me know if it works
Try TWRP flashing
As you said that the mi flash tool is detecting your phone so try flashing the twrp recovery by the edl method and then you can flash the rom
Refer this link for Flashing TWRP
youtu.be/rCONN1_IPuU(please add https:// before the link )
And after flashing process is done and of you are unable to access the internal storage then complete wipe the internal storage and you are good to go
Just disconnect battery, connect EDL cable (deep flash cable with pressed button), run MiFlash and flash the phone.
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
have you tried ADB??
santiagoruel13 said:
have you tried ADB??
Click to expand...
Click to collapse
Not yet.. but can’t get in fastboot mode, so that’s not possible I think
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
santiagoruel13 said:
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
Click to expand...
Click to collapse
Yes, the phone won’t boot to fastboot mode with arrow up and power button. Will try it with laptop later today..
Fastboot mode is volume down button + power button.
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
KabalLV said:
Fastboot mode is volume down button + power button.
Click to expand...
Click to collapse
Both not working, - and +.
santiagoruel13 said:
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
Click to expand...
Click to collapse
Not working.. device isn’t recognized in cmd
Bjarnie said:
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
Click to expand...
Click to collapse
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
ayush2901 said:
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
Click to expand...
Click to collapse
See the results.. unf not working.
Sydtek said:
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Try to google the error's and see what you can find out about them.
Bjarnie said:
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Click to expand...
Click to collapse
Did you solved this? i have the same problem
alanleonardi said:
Did you solved this? i have the same problem
Click to expand...
Click to collapse
Are you using Intel or AMD Ryzen PC? Use Intel PC and use Miflash to flash the stock ROM.
hi
did you solve your problem? i have the same issue and no one can fix it
i have exactly the same problem with poco f1 and unfortunately no one knows what is these errors
some says it is because authorized account but when authorizes account be needed its error appear wile flashing not error of cannot receive hello pocket or can not read com port
I think it happpened because of wrong firmware? I already experienced this to my son's bricked tablet. which is LG Gpad v400 i flashed the wrong firmware which firmware of Gpad V410 and end up to bricked tablet. I think the only solution for that is jtag. Try to Search for pocophone jtag.
HELLO PACKETS ERROR
happened to me with Redmi3s
i tried possibly everything related to DRIVERS, ROMS, MIFLASHER VERSIONS, FASTBOOT ROM VERSION , STORED THEM IN SAPERATE LOCATION WITH SMALLER NAMES, TRIED ON TWO DIFFERENT PC (WIN10 / WIN7,) USED DIFFERENT CABLES, TRIED QUALCOME QLOADER METHOD
USING BLADE, I CUT THE GLUE AND OPENED THE PANEL BEHIND, used TEST POINT SHORT CIRCUIT METHOD , REMOVED BATTERY AND CHARGED OVERNIGHT
BUT
redmi3s NEVER resuscitated ...
as the title said. my phone is tucked on blinking red light, can't access my fastboot. i've tried plugging it to pc but it can't detected and does'nt show anything at device manager.
Flash fastboot ROM via edl mode
zyzzyvo said:
as the title said. my phone is tucked on blinking red light, can't access my fastboot. i've tried plugging it to pc but it can't detected and does'nt show anything at device manager.
Click to expand...
Click to collapse
What did u flash on kenzo ? Why u cant access fastboot mode?
I literally have the same problem on my Kenzo but i can be detected in to the Mi Flash tool and Device Manager but it says "init: Storage Fail"
Black_Stark said:
What did u flash on kenzo ? Why u cant access fastboot mode?
Click to expand...
Click to collapse
hi sorry for the late. nothing i did not flash anything on my device.
Black_Stark said:
What did u flash on kenzo ? Why u cant access fastboot mode?
Click to expand...
Click to collapse
Put phone in Edl mode using test point method.
And then flash fastboot rom.
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
zyzzyvo said:
hi sorry for the late. nothing i did not flash anything on my device.
Click to expand...
Click to collapse
Use test point method.
Black_Stark said:
Put phone in Edl mode using test point method.
And then flash fastboot rom.
Click to expand...
Click to collapse
tried it but still my pc can't detected my phone (my pc runs on win 8 64bit)
zyzzyvo said:
tried it but still my pc can't detected my phone (my pc runs on win 8 64bit)
Click to expand...
Click to collapse
May be storage failed. Did ur phone fell in water? How long u used ur phone?
Black_Stark said:
May be storage failed. Did ur phone fell in water? How long u used ur phone?
Click to expand...
Click to collapse
no, the only thing that i remembered was when my brother borrowed my phone and drain the battery to 0%. i've been using it for like almost 2 years now
zyzzyvo said:
no, the only thing that i remembered was when my brother borrowed my phone and drain the battery to 0%. i've been using it for like almost 2 years now
Click to expand...
Click to collapse
Then battery gone may be
Hi there,
I have a Redmi Note 4 here. The device is "not" booting correctly. After switching on the screen does not show the MI logo. The screen is working and the background light is definitely switched on. I already replaced the screen (with digitizer) - same issue as before.
Device can be detected with ADB and/or FASTBOOT.
Reaching out for a second opinion. Could this be a hardware problem and how can I detect the issue? Maybe a chip died?
Update: I left the device without battery over night and pressed the power button for 30 sec. Reconnecting the battery now and switched on: the device vibrates, backlight is on - devices switches off after 10..20 sec. No ADB, no FASTBOOT.
Txs
mgw2015 said:
Hi there,
I have a Redmi Note 4 here. The device is "not" booting correctly. After switching on the screen does not show the MI logo. The screen is working and the background light is definitely switched on. I already replaced the screen (with digitizer) - same issue as before.
Device can be detected with ADB and/or FASTBOOT.
Reaching out for a second opinion. Could this be a hardware problem and how can I detect the issue? Maybe a chip died?
Update: I left the device without battery over night and pressed the power button for 30 sec. Reconnecting the battery now and switched on: the device vibrates, backlight is on - devices switches off after 10..20 sec. No ADB, no FASTBOOT.
Txs
Click to expand...
Click to collapse
Try restoring stock rom via fastboot or mi flash tool.
amitzeo1996 said:
Try restoring stock rom via fastboot or mi flash tool.
Click to expand...
Click to collapse
FASTBOOT not available with this device!
MI falsh tool only operates on Windows ...
amitzeo1996 said:
Try restoring stock rom via fastboot or mi flash tool.
Click to expand...
Click to collapse
As I wrote: FASTBOOT not available with this device!
MI falsh tool only operates on Windows ...
mgw2015 said:
As I wrote: FASTBOOT not available with this device!
MI falsh tool only operates on Windows ...
Click to expand...
Click to collapse
How did your phone end up in that situation. Did it happen automatically or you were trying to something. And if it is being detected by pc what is showing?
amitzeo1996 said:
How did your phone end up in that situation. Did it happen automatically or you were trying to something. And if it is being detected by pc what is showing?
Click to expand...
Click to collapse
The earphone jack didn't work so I had open it. After re-assembly the screen was black upon boot as described - I intially thought the display died (since not even the MI logo showed up - and replaced it - no change.
The phone is neither detected by ADB nor by FASTBOOT now. Upon connecting to the PCs USB-port my Linux launches an MTP dialog but the file list is empty.
First time this happens to me and I've dealt with >20 devices already. Spare parts carrying brick now I guess...
Move the thread here:
https://forum.xda-developers.com/redmi-note-4/help
mgw2015 said:
The earphone jack didn't work so I had open it. After re-assembly the screen was black upon boot as described - I intially thought the display died (since not even the MI logo showed up - and replaced it - no change.
The phone is neither detected by ADB nor by FASTBOOT now. Upon connecting to the PCs USB-port my Linux launches an MTP dialog but the file list is empty.
First time this happens to me and I've dealt with >20 devices already. Spare parts carrying brick now I guess...
Click to expand...
Click to collapse
Try to flash in edl mode.
Disconnect the battery, while shorting the edl pins (on the bottom left side of pcb), connect usb. After u see 9008 mode in device manager, disconnect the short. Then flash latest global fastboot rom using Xiaomi flash tool. After flash, connect battery and try to boot.
Btw while replacing the headphone jack r u sure u didnt damage any other components? Coz its quite easy to destroy other components if u apply excessive heat.
amitzeo1996 said:
Try restoring stock rom via fastboot or mi flash tool.
Click to expand...
Click to collapse
+999
---------- Post added at 01:10 PM ---------- Previous post was at 01:09 PM ----------
Te$la said:
Try to flash in edl mode.
Disconnect the battery, while shorting the edl pins (on the bottom left side of pcb), connect usb. After u see 9008 mode in device manager, disconnect the short. Then flash latest global fastboot rom using Xiaomi flash tool. After flash, connect battery and try to boot.
Btw while replacing the headphone jack r u sure u didnt damage any other components? Coz its quite easy to destroy other components if u apply excessive heat.
Click to expand...
Click to collapse
+99898
---------- Post added at 01:10 PM ---------- Previous post was at 01:10 PM ----------
nubitolz said:
Move the thread here:
https://forum.xda-developers.com/redmi-note-4/help
Click to expand...
Click to collapse
Nice
Te$la said:
Try to flash in edl mode.
Disconnect the battery, while shorting the edl pins (on the bottom left side of pcb), connect usb. After u see 9008 mode in device manager, disconnect the short. Then flash latest global fastboot rom using Xiaomi flash tool. After flash, connect battery and try to boot.
Btw while replacing the headphone jack r u sure u didnt damage any other components? Coz its quite easy to destroy other components if u apply excessive heat.
Click to expand...
Click to collapse
Txs!
However, as wrote: I use it as a spare parts source now.