Hey guys,
I am new to Xiaomi Devices, Just got a Redmi Note 3 Snapdragon variant from India. Let me get to the issue at hand. I have tried to get to EDL mode and i have been successful, but the issue is that the device is then not staying in EDL mode, but rather its rebooting after 5 or 6 secs of EDL mode. Is there any way to solve this?
Please note : Using Windows 10 , MIUI 7 latest Stable version.
Is there any one who can help me out?
shyam2010 said:
Is there any one who can help me out?
Click to expand...
Click to collapse
How are you booting to EDL mode?
stephendt0 said:
How are you booting to EDL mode?
Click to expand...
Click to collapse
I am booting to EDL mode by following these steps.
Shut down phone - then volume down + power to fastboot - then connect to PC - Then boot to EDL by double clicking a .bat file in my pc
everything goes well and boots to EDL mode - led blinks for 5 - 6 times, then mi logo appears, phone has shut down automatically
Beats me..! Tried another pc?
stephendt0 said:
Beats me..! Tried another pc?
Click to expand...
Click to collapse
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
shyam2010 said:
Thanks for trying to help me though ! Will try on another PC, maybe its because of my previous Phone's ADB drivers.
Click to expand...
Click to collapse
ever resolve this?
Related
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
hey everyone, flashed the cwm recovery which i found someware and the source were saying the it meant for all devices. but npw my phone does not go to fastnoot nor to recovery mode.
But, whenever i connect it to pc the the red noti. red light blinks and device name qualcomm 900e shows up in device manager. also waiting for device in adb. is there any way to revive my phone???:crying: :crying:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
GNVM said:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
Click to expand...
Click to collapse
flashtool does not recognize the device.
also in adb there is no device in list?
jobangill99 said:
flashtool does not recognize the device.
also in adb there is no device in list?
Click to expand...
Click to collapse
Try miflash to flash a new rom. If this does not work, then remove the back panel of you phone and disconnect the battery cable. Watch video on youtube for help. After that leave the phone disconnected for 30 mins and then reconnect it. Press vol down and power and you should be able to enter fastboot mode.
If nothing works go for test point method. see videos for better understanding.
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Try to press power button at least 30 to 40 sec...or till u see mi logo
It's hard bricked I think
Sent from my LS-5010 using XDA-Developers mobile app
How can hard brick happen with miflash edl?
bhanuchowdary said:
Dear Friends today I flashed my redmi note 3 using EDL flash and it went success but after that my device is not turning on and its always on EDL mode only. please help me.
Click to expand...
Click to collapse
Connect to pc with usb cable and wait until battery fully discharged. And recharge it for 3 hours. and press power buton for 20-25 second it will open.
What does the windows device manager say when your phone is connected to the pc? If it has something like "900E" mode you need this http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928 . This helped me out as my phone was dead. It only works when your battery is not completely discharged.
If you have "9008" mode in device manager, you are really in the EDL mode. So it is no problem to flash an appropriate fastboot rom with mi flash tool. Maybe you need the latest beta from mi flash tool though.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
redminote3 said:
How can hard brick happen with miflash edl?
Click to expand...
Click to collapse
happend to me after i tried to unlock my bootloader. I put a modified bootloader to the rom that i wanted to flash. After that my phone was dead, had only HS USB 900E in device manager
Yeah i know that can happen on locked BL, but I thought on unlocked
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
adithyan25 said:
could you please explain more, about what u have actually done...?
edit:-
some helpful things you may try .
*hoping you are running windows7,8,10(64bit) try usong mi flash tool beta..if on32 bit os use layest mi flash tool..
*install pda net,and adb drivers
*disable driver enforcement in windows.
*make sure phone is detected in miflash tool..(just click refresh button to see whether phone is detected in mi flash tool..
*use latest fastboot rom (you can see link for kenzo in guide section,just go through old posts)
Click to expand...
Click to collapse
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
asett3 said:
Thanks for your support. I am using Win 10-64Bit, Mi Flash Beta, Detecting phone without any issue flashing is also done successfully. But after that it is still on EDL mode
Click to expand...
Click to collapse
Press power button about 10-20 seconds
[email protected] said:
Press power button about 10-20 seconds
Click to expand...
Click to collapse
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
asett3 said:
Tried but not booting.... Also tried combination pwr+vol-/ (pwr)+(vol-) / (pwr)+(vol-) / (pwr)+(vol-)+(vol-) ..........
Still in EDL Red led Blinking while charging and connected to PC. (9008)
Click to expand...
Click to collapse
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
adithyan25 said:
some clarifications needed
*did you replaced any file especially the bootloader file to unlock the unofficial way.
*kenzo/kate?
*did you try booting into fastbokt mode by connection phone to pc(pow+vol down)
Click to expand...
Click to collapse
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
bigbrother69 said:
Some ppl told me I was saying sh** but even with a fully working ROM my vol down never came back.
My story is kinda similar to yours, if I do remember, disconnect battery + deep flash cable made de trick (http://en.miui.com/thread-365090-1-1.html)
Click to expand...
Click to collapse
But my pc is detecting Qualcomm HS-USB QDLoadar 9008 and i can flash via mi flashtool.
asett3 said:
Kenzo,
Officially Unlocked
Fastboot Mode not working
Power + Vol Down no respond :,(
Click to expand...
Click to collapse
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
adithyan25 said:
probabaly you will have to disconnect battery and reconnect it again.. and flash rom using deep flash cable..(either make one or buy it online ,refer youtube if u wanna make one)
Click to expand...
Click to collapse
Same not powering on aftr successful flash
Please Help someone
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
bigbrother69 said:
Did you try to flash battery disconnected, deep flash cable connected, push button on, release, connect battery, push power button..
I mean every combinaison possible with those stuff...I really thought mine was dead during at least a month so...hope is still permitted..
Click to expand...
Click to collapse
tried gave it to service center!
mobile pc co conect rakho apne aap reboot ho jayega automatic
Bro plz tell me ur contact number nd my number 7340329575 plz call me im helf u
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
asett3 said:
NO Fastboot, No Recovery mode only EDL is accessible.
Qualcomm HS-USB QDLoader 9008 is detected. Tried flashing Global Dev Rom and Global Stable Rom. But Same problem... NO FastBoot, No Recovery
Please Help
Click to expand...
Click to collapse
Bro tell me ur contact number nd my contact number 7340329575 plz call me my number im helf u
Did u find any solution?
I have also experiencing this problem. Back in MIUI 8, when I'm totally running out of battery, the phone won't charge or getting into any mode
Try to
"Hold Vol- + Connect the phone to PC USB Slot"
Let me know if it works
Try TWRP flashing
As you said that the mi flash tool is detecting your phone so try flashing the twrp recovery by the edl method and then you can flash the rom
Refer this link for Flashing TWRP
youtu.be/rCONN1_IPuU(please add https:// before the link )
And after flashing process is done and of you are unable to access the internal storage then complete wipe the internal storage and you are good to go
Just disconnect battery, connect EDL cable (deep flash cable with pressed button), run MiFlash and flash the phone.
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
have you tried ADB??
santiagoruel13 said:
have you tried ADB??
Click to expand...
Click to collapse
Not yet.. but can’t get in fastboot mode, so that’s not possible I think
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
santiagoruel13 said:
You mean , your phone cant boot to fastboot mode??
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
Fastboot reboot bootloader..
Have you tried that???
Click to expand...
Click to collapse
Yes, the phone won’t boot to fastboot mode with arrow up and power button. Will try it with laptop later today..
Fastboot mode is volume down button + power button.
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
KabalLV said:
Fastboot mode is volume down button + power button.
Click to expand...
Click to collapse
Both not working, - and +.
santiagoruel13 said:
Just connect the phone to pc. .then hit adb.
Then run the command
Adb reboot bootloader..
Click to expand...
Click to collapse
Not working.. device isn’t recognized in cmd
Bjarnie said:
Hello,
I have my Pocophone for 2 months now. I installed Lineage OS 16.0 succesfully and everything was working perfect. Out of nothing I got a blue screen and now my phone won't turn on anymore. When I connect it to my laptop , the device is seen as Qualcomm HS-USB QDLoader 9008. Looks like it's bricked...
Can someone help me to unbrick it?
Thanks in advance.
Greetings,
Bjarnie
Click to expand...
Click to collapse
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
ayush2901 said:
As per my guess, your device is in EDL mode. I think you could directly flash fastboot rom to it in MiFlash tool, while it is seen as Qualcomm HS-USB QDLoader 9008.
Click to expand...
Click to collapse
See the results.. unf not working.
Sydtek said:
Go to
https://miui.blog/any-devices/qualcomm-qpst-tool/
Click to expand...
Click to collapse
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Try to google the error's and see what you can find out about them.
Bjarnie said:
Thanks! I tried it without any result yet. Tried different roms/configs but everytime it ends with an error
Click to expand...
Click to collapse
Did you solved this? i have the same problem
alanleonardi said:
Did you solved this? i have the same problem
Click to expand...
Click to collapse
Are you using Intel or AMD Ryzen PC? Use Intel PC and use Miflash to flash the stock ROM.
hi
did you solve your problem? i have the same issue and no one can fix it
i have exactly the same problem with poco f1 and unfortunately no one knows what is these errors
some says it is because authorized account but when authorizes account be needed its error appear wile flashing not error of cannot receive hello pocket or can not read com port
I think it happpened because of wrong firmware? I already experienced this to my son's bricked tablet. which is LG Gpad v400 i flashed the wrong firmware which firmware of Gpad V410 and end up to bricked tablet. I think the only solution for that is jtag. Try to Search for pocophone jtag.
HELLO PACKETS ERROR
happened to me with Redmi3s
i tried possibly everything related to DRIVERS, ROMS, MIFLASHER VERSIONS, FASTBOOT ROM VERSION , STORED THEM IN SAPERATE LOCATION WITH SMALLER NAMES, TRIED ON TWO DIFFERENT PC (WIN10 / WIN7,) USED DIFFERENT CABLES, TRIED QUALCOME QLOADER METHOD
USING BLADE, I CUT THE GLUE AND OPENED THE PANEL BEHIND, used TEST POINT SHORT CIRCUIT METHOD , REMOVED BATTERY AND CHARGED OVERNIGHT
BUT
redmi3s NEVER resuscitated ...