Hey guy, about 10 minutes ago I decided to use my phone. When I picked it up, i noticed it was at the boot screen, I thought "meh" and restarted it, but It got stuck at the boot screen.. I tried my sisters battery and she used mine, it would start on hers but hers wouldn't start on mine.
Any way, I tried Power Button + Volume Up + Home which went straight to the bootscreen
Please help me guys
My phone's rooted on 4.1.2
caleblich said:
Hey guy, about 10 minutes ago I decided to use my phone. When I picked it up, i noticed it was at the boot screen, I thought "meh" and restarted it, but It got stuck at the boot screen.. I tried my sisters battery and she used mine, it would start on hers but hers wouldn't start on mine.
Any way, I tried Power Button + Volume Up + Home which went straight to the bootscreen
Please help me guys
My phone's rooted on 4.1.2
Click to expand...
Click to collapse
Can you get into Recovery? Can you get into Download mode? Are you rooted? What rom? What kernel? I guess it would be good to have some more information .
chrismast said:
Can you get into Recovery? Can you get into Download mode? Are you rooted? What rom? What kernel? I guess it would be good to have some more information .
Click to expand...
Click to collapse
I can't get into recovery or download yes it's rooted and I got it to 4.1.2
chrismast said:
Can you get into Recovery? Can you get into Download mode? Are you rooted? What rom? What kernel? I guess it would be good to have some more information .
Click to expand...
Click to collapse
My mistake, I can get into Download Mode, I hacked it to 4.1.2 if that's what you mean by rom, and I'm not sure what kernel is
Well, a kernel is basicly a code which connects your phone's or actually any electronical device's hardware and software. For example if you press the vol up button, your kernel 'transmits' the singal to your software and makes the volume go up.
ROM is basicly your operating system. It comes from words Read Only Memory. If you search XDA, you will find tons of information about roms and kernels and stuff. Hope I helped
Sent from my GT-I9300 running CM10.1 nightly ROM using xda premium
leinobOy said:
Well, a kernel is basicly a code which connects your phone's or actually any electronical device's hardware and software. For example if you press the vol up button, your kernel 'transmits' the singal to your software and makes the volume go up.
ROM is basicly your operating system. It comes from words Read Only Memory. If you search XDA, you will find tons of information about roms and kernels and stuff. Hope I helped
Sent from my GT-I9300 running CM10.1 nightly ROM using xda premium
Click to expand...
Click to collapse
Thanks
i'm currently downloading Samsung galaxy s3 4.1.2, and I'm going to utilize it through Odin. It sucks because it stopped working on the last night of holidays haha
leinobOy said:
Well, a kernel is basicly a code which connects your phone's or actually any electronical device's hardware and software. For example if you press the vol up button, your kernel 'transmits' the singal to your software and makes the volume go up.
ROM is basicly your operating system. It comes from words Read Only Memory. If you search XDA, you will find tons of information about roms and kernels and stuff. Hope I helped
Sent from my GT-I9300 running CM10.1 nightly ROM using xda premium
Click to expand...
Click to collapse
I get this error in odin now
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELK4_I9300OJKELK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
And I never ticked Re-Partition
It sounds like half sds. I don't expect it can be repaired without a service centre.
Read some of the sds threads in general
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
It sounds like half sds. I don't expect it can be repaired without a service centre.
Read some of the sds threads in general
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I'm currently downloading the stock rom, if that doesn't work i'll have to take it back to the store
Did you make sure that the ROM you're flashing is .tar file? You can't flash .zip files with odin. If you have a .zip file and working clock work mod recovery you can flash the ROM with it. If your clock work mod recovery doesn't work you shoult try to find .tar file of your rom and flash it with odin.
Sent from my GT-I9300 using xda premium
leinobOy said:
Did you make sure that the ROM you're flashing is .tar file? You can't flash .zip files with odin. If you have a .zip file and working clock work mod recovery you can flash the ROM with it. If your clock work mod recovery doesn't work you shoult try to find .tar file of your rom and flash it with odin.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You can see its a valid tar by the odin output a few posts back
Sent from my GT-I9300 using Tapatalk 2
enter download mode..if product name not show gt-i9300...for sure u need to repair it with samsung service centre...
You need go to service center. No PIT Partition - you emmc chip damaged.
SDS if you haven't wiped PIT accidently
Related
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Sbl.bin
I flashed rom through Odin and its return is like this.
The Sbl.bin is likely to be related to the bootloader.
I cannot access to the recovery or normally reboot.
What can I do?? I tried flashing for several times.
Zillions of thanks if you guys can help me!!!!
What is your device?
aceofclubs said:
What is your device?
Click to expand...
Click to collapse
i9100 of course.
superfan' said:
i9100 of course.
Click to expand...
Click to collapse
Why did you start a new thread? You already had a perfectly good thread going for the same problem here: http://forum.xda-developers.com/showthread.php?p=24175814.
And you've apparently decided to ignore all the advice in that thread that said to flash back to a stock GINGERBREAD firmware, since you again are trying to flash LPQ, which is one of the earlier ICS releases.
superfan' said:
i9100 of course.
Click to expand...
Click to collapse
Not of course. Because the problem you describe is what happens when you try to flash I9100 firmware on a model like I9100G or others that are called SGS2 but are different hardware. Only true way to tell is read the sticker under the battery.
Anyway forget this thread and take the advice in the other thread and report back there.
Good luck.
ctomgee said:
Why did you start a new thread? You already had a perfectly good thread going for the same problem here: http://forum.xda-developers.com/showthread.php?p=24175814.
And you've apparently decided to ignore all the advice in that thread that said to flash back to a stock GINGERBREAD firmware, since you again are trying to flash LPQ, which is one of the earlier ICS releases.
Click to expand...
Click to collapse
I tried to flash KI3, the gingerbread, it still fails. I think it is a new problem, and it is related to the NAND rw corruption mentioned by others. Therefore, I started a new post but not ignoring others' advice.
If you can help me with my problem, zillions of thanks then.
Flash a stock GB rom and see what happens .
jje
Given you say you've tried everything suggested, and given you think it's a bootloader issue, there are literally dozens and dozens of posts on here about same.
Do a Google search (rather than using XDA search), and append 'XDA' to whatever your search terms are.
This problem you're having is not common, and you're not going to find a fix easily for this (as you're discovering) short of having it JTAG'd or sending it to a Samsung service center.
Is samsung customer service accepted to handle this, even i have some custom binary no?
Or if i pay some money, they wll fix that for me??
Sent from my GT-P7500 using XDA
Yep. They'll fix it, but you'll more than likely end up paying for it. A JTAG repair might be a cheaper option. Here's one in the US, I'm sure there are many others around the world (maybe near you, search Google).
Can you still enter download-mode (Vol. down + Home Button + Power Button)? If so, you can try these steps in this Guide here
Be careful with Re-Partition..i ruined my device some days ago with it after try to fix nand rw corruption.
I have tried all of those before. But i even can't flash things through. Even vthe kernel, recovery and bootloaders.
Sent from my GT-P7500 using XDA
So when you try to flash a 3-Part Firmware (without Re-Partition) it stucked again?
PS: Be very careful .. I has a very similar problem and with Re-Partition I shoot it up -.- (http://forum.xda-developers.com/showthread.php?p=24115788#post24115788)
What have you done to shoot it up??
I stucked even i flashed a three part firware without repartition and pit file
Sent from my GT-P7500 using XDA
Hey,
I'm sorry but i didn't solve the problem for me. With "shoot it up" I mean "i killed my phone". Sorry for that mistake!
I followed the guide too but at first step I flashed with Re-Partition and PIT file. Odin stucked at "Partitioning" so after 10min I closed Odin and restart S2...after that my device was completly dead. Screen stays black. Sorry don't know how to fix it. My S2 is on the way to rapaircenter now.
Aur0r4 said:
Hey,
I'm sorry but i didn't solve the problem for me. With "shoot it up" I mean "i killed my phone". Sorry for that mistake!
I followed the guide too but at first step I flashed with Re-Partition and PIT file. Odin stucked at "Partitioning" so after 10min I closed Odin and restart S2...after that my device was completly dead. Screen stays black. Sorry don't know how to fix it. My S2 is on the way to rapaircenter now.
Click to expand...
Click to collapse
I can access to the download mode but I can't flash anything through my beloved s2.
I am going to send it to the repair centre, u suggest me to send them to Samsung's or others??
Go into recoverymode and install a rom in ur memory internal or extaernal
Just do that turn off phone...and them volume up+power+home button u will enter in recovery mode not in download mode...now just search the rom ...notice u do this if its rooted... Look if u just put insecure kernel by odin i sugere u take sd card out download a rom by computer to sd card. input again in phone and turn on in recovery mode... i think will works im not responsabile for nothing can happened but im pass the same like i write...tell something
Sent from my GT-I9100 using XDA
Look the guy up say to you a dificult way to do and also u may brick ur phone...u do somethings in odin i just never do...i just saw now otherwise u already fix it if i put this earlier
Sent from my GT-I9100 using XDA
Good day gang,
I was trying to sort out a USB Host problem and from another forum I was following a thread in which they stated to flash a .pit etc etc etc. Last time i do something from another forum. Ive been here since WinMo days....i know better than that....
Well...I've loaded up Odin....got my ROM (Factory) and it would hang on NAND Write Start. From there it would do nothing.
"Tech Support" :silly:
Thanks Mate.
PS- It's a I-9300
Paul_Days said:
Good day gang,
I was trying to sort out a USB Host problem and from another forum I was following a thread in which they stated to flash a .pit etc etc etc. Last time i do something from another forum. Ive been here since WinMo days....i know better than that....
Well...I've loaded up Odin....got my ROM (Factory) and it would hang on NAND Write Start. From there it would do nothing.
"Tech Support" :silly:
Thanks Mate.
PS- It's a I-9300
Click to expand...
Click to collapse
Had that yesterday (only worse, Odin stopped half way during the flash), pull the battery and wait 30 seconds, put back battery and cover. Insert a jig in the phone`s usb port and you`re in downloadmode. Now flash a stock rom with Odin V3 3.0.4.
If you don`t have a jig you could try in manualy (volume down + menu + power button at the same time).If that doesn`twork there are threads on this site to revive your phone after a bad flash, please search for them. Good luck
???
gee2012 said:
Had that yesterday (only worse, Odin stopped half way during the flash), pull the battery and wait 30 seconds, put back battery and cover. Insert a jig in the phone`s usb port and you`re in downloadmode. Now flash a stock rom with Odin V3 3.0.4.
If you don`t have a jig you could try in manualy (volume down + menu + power button at the same time).If that doesn`twork there are threads on this site to revive your phone after a bad flash, please search for them. Good luck
Click to expand...
Click to collapse
I dont have a jig, but I can get the phone in download mode. When I do, I choose in the PDA section my ROM, Reboot and F. Reset Time, and START then this happens:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
From there it hangs.....the usual SYSTEM prompt on the top and the bar which shows progress dont appear.
Do i need to reflash a .pit to revert back?
Paul
Try 2
So I decided to try to flash it without the F. Reset Time option and this is what I got:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Kies is not running but I checked my PC startup files and there are some Kies managers and such that load on boot....gonna try to disable them....
Still if u guys know how to unbrick, please ring in...
Paul
Should I try a 3 part ROM and Re-Partition? Before bricking I just loadad a PIT by itself.....thats when the phone bricked.....
Paul_Days said:
Should I try a 3 part ROM and Re-Partition? Before bricking I just loadad a PIT by itself.....thats when the phone bricked.....
Click to expand...
Click to collapse
First close everything Kies related, also in the windows traymanager. Rightclick on the bottom windows bar and select taskmanager, there are Kies aplications also and end them. Tick autoreboot and f.reset.time then retry flashing the rom with Odin. You don`t need an extra pit file because it is inside the rom already. Report back after you`re done please.
gee2012 said:
First close everything Kies related, also in the windows traymanager. Rightclick on the bottom windows bar and select taskmanager, there are Kies aplications also and end them. Tick autoreboot and f.reset.time then retry flashing the rom with Odin. You don`t need an extra pit file because it is inside the rom already. Report back after you`re done please.
Click to expand...
Click to collapse
It's a no-go its hangs on NAND write Start!!!
You haw imternational sgs3??
Sent from my GT-I9300 using xda premium
muhamet said:
You haw imternational sgs3??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Read OP.
Sent from my GT-I9300 using xda premium
nodstuff said:
Read OP.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I believe it is the International Version, the ROM is brazilian if I am not mistaken (I9300XXALF2_I9300OXAALF2_I9300XXLF2). BTW this is a Demo Unit, so I don't have the calling services. But I do remember that when I was inquiring about aftermarket ROMs I found out this one was Brazilian.
So yes, this is the International version.
So you borked your partition table by flashing a .pit? It would probably be a good idea to go one step back and fix your partition table before trying to flash a Rom.
I'm sorry but I have no idea where to find a .pit to return your partitions to the factory state.
Sent from my GT-I9300 using Tapatalk 2
dr.m0x said:
So you borked your partition table by flashing a .pit? It would probably be a good idea to go one step back and fix your partition table before trying to flash a Rom.
I'm sorry but I have no idea where to find a .pit to return your partitions to the factory state.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Me neither....But....I'll search around and see if there is a factory .pit somewhere....also...If I can get another device exactly like mine, can I dump the WHOLE system and flash EVERYTHING (pit, system, etc) onto mine?
???
Paul
Try this link: http://www.mod2xtreme.com/showthread.php?11722-Download-OPS-amp-PIT-files
Sent from my GT-I9300 using Tapatalk 2
torsrex said:
Try this link: http://www.mod2xtreme.com/showthread.php?11722-Download-OPS-amp-PIT-files
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Which do I choose? The latest one? Then how do I this???
Do I run Odin......choose the PIT? click "Re-partition?, select the "PDA" and i9300 image? then Start?
I have no idea what to do....
Take your phone to a service center and tell them something went wrong during a software update.
Verstuurd van mijn GT-I9300 met Tapatalk
gee2012 said:
Take your phone to a service center and tell them something went wrong during a software update.
Verstuurd van mijn GT-I9300 met Tapatalk
Click to expand...
Click to collapse
We don't have one....
PASS!!!
SUCCESS!!!
Moderators PLEASE STICKY!!!
Thanks to torsrex...I did a re-partition to the latest .pit found in that list. Then I selected my factory ROM which I had...
4 mins later... flash.....PASS!!!
In case this happens to a member...here is the simple solution....just hard to find .pit file.
Cheers,
Paul
PS- My system is COMPLETE: no files were lost....wow!
How did you flash the pit??
that is which option did you choose in Odin
Repartition and loaded the file to PDA or Loaded the file in PIT.
Also
Does anyone know how to extract Modem from Stock firmware??
adkamath said:
How did you flash the pit??
that is which option did you choose in Odin
Repartition and loaded the file to PDA or Loaded the file in PIT.
Also
Does anyone know how to extract Modem from Stock firmware??
Click to expand...
Click to collapse
There is a modem thread
Paul_Days said:
SUCCESS!!!
Moderators PLEASE STICKY!!!
Thanks to torsrex...I did a re-partition to the latest .pit found in that list. Then I selected my factory ROM which I had...
4 mins later... flash.....PASS!!!
In case this happens to a member...here is the simple solution....just hard to find .pit file.
Cheers,
Paul
PS- My system is COMPLETE: no files were lost....wow!
Click to expand...
Click to collapse
Hello,
Is your Galaxy S3 with internal 16Gb card?
Thanks in adavance.
[]'s
Ok so last night my phone froze up while I was browsing the web (it froze just after rotating, if that's of any significance) so I held the power button down until it turned off. Trying to turn it on again, it just sat at the galaxy s 2 logo before any bootanimations etc start playing.
I thought I'd try to just re-flash the ROM (CM10 nightly 26/9/2012) and it seemed to just freeze up near the end of the flash, so I left it to do it's thing.
When I returned to the phone, it was showing me a kernel panic screen, so I held the power button to turn it off again and since then it won't boot into the ROM, it won't boot into recovery, and until just now it wouldn't be recognised by odin in download mode.
I had tried installing the USB drivers for the phone etc and it wouldn't work, however while writing this topic I just got a notification on my PC saying USB drivers had been installed and Odin seemed to recognise my phone, so I tried flashing cm9 resurrection, however it seems to be stuck. These are the messages in Odin, for reference:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cm-9-20120420-ODIN-galaxys2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> NAND Write Start!!
and it's just been stuck there since I pressed start. There is no progress bar or anything on the phone either. Oh, and Odin's progress bar thing at the top just says "KERNEL" with a blank bar under it and "0:[com3]" with a yellow background below that.
Is it safe to unplug the phone and try again with a different USB cable?
EDIT: After trying different methods to recover it (with the same result from Odin):
Orkane1989 said:
I wouldn't risk it. Does definity sound like a dodgy data partition. You should post in that guide explaining your situation. Somebody who know more than me should be able to give you a few options.
Click to expand...
Click to collapse
Try reflashing kernel then flash ROM.
Sent from Jelly Fuelled SGS2
Orkane1989 said:
Try reflashing kernel then flash ROM.
Sent from Jelly Fuelled SGS2
Click to expand...
Click to collapse
So it's safe to unplug the phone?
D3_ said:
So it's safe to unplug the phone?
Click to expand...
Click to collapse
Yes I have done it before. You just won't have a ROM on your device. Just put it back into download mode and try the kernel first before ROM.
Sent from Jelly Fuelled SGS2
Orkane1989 said:
Try reflashing kernel then flash ROM.
Sent from Jelly Fuelled SGS2
Click to expand...
Click to collapse
Orkane1989 said:
Yes I have done it before. You just won't have a ROM on your device. Just put it back into download mode and try the kernel first before ROM.
Sent from Jelly Fuelled SGS2
Click to expand...
Click to collapse
Just tried this, getting the same thing, Odin gets the first "bar" in the progress bar completed and seems to get stuck. Same output as above.
When the first bar completes that (from what I remember) is just Odin unpacking the files to flash to device. Once it does that it checks that its on there properly which is by comparing md5, then it send a command to run the kernel.
Seems like your phone is unable to do even that.
You will have to consult someone with some more knowledge about this than me. You could have a corrupt data partition... but its honestly out of my league now lol. Sorry I couldn't help.
Sent from Jelly Fuelled SGS2
Orkane1989 said:
When the first bar completes that (from what I remember) is just Odin unpacking the files to flash to device. Once it does that it checks that its on there properly which is by comparing md5, then it send a command to run the kernel.
Seems like your phone is unable to do even that.
Click to expand...
Click to collapse
According to the output it gives me (in the OP) it does successfully check the MD5 though.
I'll admit, I haven't actually used Odin since I first rooted this phone (back in december last year) so I'm back to knowing basically nothing about how it works.
Yes it does confirm the md5
But after that it sends the commands to start running the new kernel (basically installing it on the device firstly)
Which is where it gets stuck.
Sent from Jelly Fuelled SGS2
Just tried this: http://forum.xda-developers.com/showthread.php?t=1457458
Same issue with flashing those files.
I don't want to try the .pit because if it doesn't flash then I'll be pretty f*cked, right?
I would try what ever else you could find because if you get that guide wrong you could end up turning your phone into a paperweight. But if you so have to use the guide take note that you ahould try flashing the files WITHOUT .pit or repartition first. If that doesn't succeed than your last option is to use the .pit file and repartition.
Sent from Jelly Fuelled SGS2
I did try it, without the .pit/repartition as the guide says to try it without it first, but again, it won't flash anything (which is why I don't think I'll try the .pit/repartition)
I wouldn't risk it. Does definity sound like a dodgy data partition. You should post in that guide explaining your situation. Somebody who know more than me should be able to give you a few options.
Sent from Jelly Fuelled SGS2
Hey guys.
I have a GT- i9300 with cm10. 1 hour ago my phone randomly shut down and would not boot!
My phone now only boots to the Samsung screen and stuck. I cant boot into recovery mode either so cant wipe data/factory.
Download mode still works.
So i tried to flash few thing with no success - cf-root, stock roms, cwm....but I get same error "no PIT partition" in odin.
Any ideas please help?
I searched for a solution on the forum and the web without success.
thanks
edit:
now i tried another stock rom and odin stuck on this
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL4_I9300OJKELK9_I9300JKELK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
Click to expand...
Click to collapse
please help!
try flashing the correct pit file
Glebun said:
try flashing the correct pit file
Click to expand...
Click to collapse
but i dont know what pit file i should flash or where can i download it.
can you give me a link?
Have you tried using a different pc?
Sent from my GT-I9300 using xda app-developers app
kofiaa said:
Have you tried using a different pc?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
YES
Try sammobile for PIT file .
jje
didnt help. someone know this problen?!
there is a solution?
razbensimon said:
didnt help. someone know this problen?!
there is a solution?
Click to expand...
Click to collapse
I`am 99,5% sure this file is correct for the 16GB Galaxy S3 https://www.dropbox.com/s/9o7r2uj0on6wb4q/GT-I9300_mx_20120220.pit. But check it yourself too, wouldn`t want to brick your phone
Usualy the higher the last 2 digits are the bigger the internal sdcard. There are 3 pit files for the 16,32 and 64GB model. The one posted above is the lowest number.
razbensimon said:
didnt help. someone know this problen?!
there is a solution?
Click to expand...
Click to collapse
which pit file did you flash?
gee2012 said:
I`am 99,5% sure this file is correct for the 16GB Galaxy S3 *removed because of 10 posts limit*. But check it yourself too, wouldn`t want to brick your phone
Usualy the higher the last 2 digits are the bigger the internal sdcard. There are 3 pit files for the 16,32 and 64GB model. The one posted above is the lowest number.
Click to expand...
Click to collapse
Hi,
I attempted to use your PIT file (my phone is already soft-bricked, so yeah), but Odin tells me 'Re-Partition operation failed'. That's all.
Anything you could think off I could do to fix it?
I am using an International SGS3 16GB, so it should be the right PIT file, I think.
I think your phone just died. All the symptoms make me to suppose the following syndrome: SDS.
Sorry for you bro .Check there are a couple of thread which are talking about that.
Sent from my GT-I9300 using xda premium
francescozanghetta said:
I think your phone just died. All the symptoms make me to suppose the following syndrome: SDS.
Sorry for you bro .Check there are a couple of thread which are talking about that.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Damn. There's no fix for that, right? Except for sending it back to where it came from...
razbensimon said:
Hey guys.
I have a GT- i9300 with cm10. 1 hour ago my phone randomly shut down and would not boot!
My phone now only boots to the Samsung screen and stuck. I cant boot into recovery mode either so cant wipe data/factory.
Download mode still works.
So i tried to flash few thing with no success - cf-root, stock roms, cwm....but I get same error "no PIT partition" in odin.
Any ideas please help?
I searched for a solution on the forum and the web without success.
thanks
edit:
now i tried another stock rom and odin stuck on this
please help!
Click to expand...
Click to collapse
try to press different timing on volup+menu+power until recovery mode shows up, try and try just like the guy did here
http://forum.xda-developers.com/showthread.php?t=2104059
chris151722 said:
try to press different timing on volup+menu+power until recovery mode shows up, try and try just like the guy did here
http://forum.xda-developers.com/showthread.php?t=2104059
Click to expand...
Click to collapse
He said he can't get into recovery mode, so that's not going to work.
Lolmewn said:
He said he can't get into recovery mode, so that's not going to work.
Click to expand...
Click to collapse
iknow that, thats why i said try different timing just like pressing the combination longer than usual pressing time, i am not also sure if it will work or not cos other have same situation in the link i posted(boot loop, no recovery, only download mode) tried also many diiferent rom but at the end he managed to get into cwm recovery by pressing the combination key longer.
http://forum.xda-developers.com/showthread.php?t=2360816
I have the same problem what can i do except returning to sam ****y center ?
i had the same problem with my i9300 samsung
the solution is to change the EMMC chip
i have verizon galaxy note 2 and jailbreak bootloader and flashed DN3 rom.
and i had no time to fix wifi so i went out and came back really late..my computer was off
so i just re-search on google and i just put dn3 and went in the first one...which is for GT-N7100....
and i just scroll down without checking...click the wifi fix thread for GT-N7100..and i also scroll down without checkin..
and i follow those steps....dang alcohol make me blind.. i didnt even check the file name...after i finish that..boot it up
in front of me my VZW galaxy note2 show me "SAMSUNG GT-N7100".....
so i fricked out i try to flashed STOCK I605 rom..odin give FAIL message....tried 66root VZW stock rom...again odin give me FAIL message..
and after that on the screen.... phone- -yellow triangle with exclamation mark - - computer with Firmware upgrade encountered an issue.please select recover mode in kies & try again...
what do i have to do now..:crying::crying::crying::crying:
corean0213 said:
i have verizon galaxy note 2 and jailbreak bootloader and flashed DN3 rom.
and i had no time to fix wifi so i went out and came back really late..my computer was off
so i just re-search on google and i just put dn3 and went in the first one...which is for GT-N7100....
and i just scroll down without checking...click the wifi fix thread for GT-N7100..and i also scroll down without checkin..
and i follow those steps....dang alcohol make me blind.. i didnt even check the file name...after i finish that..boot it up
in front of me my VZW galaxy note2 show me "SAMSUNG GT-N7100".....
so i fricked out i try to flashed STOCK I605 rom..odin give FAIL message....tried 66root VZW stock rom...again odin give me FAIL message..
and after that on the screen.... phone- -yellow triangle with exclamation mark - - computer with Firmware upgrade encountered an issue.please select recover mode in kies & try again...
what do i have to do now..:crying::crying::crying::crying:
Click to expand...
Click to collapse
Where is Odin giving you a fail message after? You are still able to get into recovery? If so just flash another ROM for Verizon.. Let me know.. Don't freak out though this is not a big deal
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
Where is Odin giving you a fail message after? You are still able to get into recovery? If so just flash another ROM for Verizon.. Let me know.. Don't freak out though this is not a big deal
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
i forgot to take a picture that message....and dont remember..:crying:
i can not get into recovery..only download mode...
so what i tried i extract n7100 file that i flash into my bootload and check what kind of file is in, and than i extract ROM file to get same kind of file..
and i looking around how to make .tar.md5 and done.
so i flash this file into my phone's on download mode.. i saw download gauge getting up and i thought i found out the way to fix..BUT gauge go up near to max and just stop there and does not move.. even odin dont show me any FAIL or ERROR message it just stop and im pretty sure it stop on sboot.bin section.
corean0213 said:
i forgot to take a picture that message....and dont remember..:crying:
i can not get into recovery..only download mode...
so what i tried i extract n7100 file that i flash into my bootload and check what kind of file is in, and than i extract ROM file to get same kind of file..
and i looking around how to make .tar.md5 and done.
so i flash this file into my phone's on download mode.. i saw download gauge getting up and i thought i found out the way to fix..BUT gauge go up near to max and just stop there and does not move.. even odin dont show me any FAIL or ERROR message it just stop and im pretty sure it stop on sboot.bin section.
Click to expand...
Click to collapse
You need to go to droidstyle 's thread and download a Odin file with bootloader in it..Also pit file.. flash them through Odin and you should be good
Sent from my SCH-I605 using xda app-developers app
lacoursiere18 said:
You need to go to droidstyle 's thread and download a Odin file with bootloader in it..Also pit file.. flash them through Odin and you should be good
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
are you talking about this one?
http://forum.xda-developers.com/showthread.php?t=2043636
corean0213 said:
are you talking about this one?
http://forum.xda-developers.com/showthread.php?t=2043636
Click to expand...
Click to collapse
Negative..This would be the one:
http://forum.xda-developers.com/showthread.php?t=2024207
you probably want to use the RAMC3
lacoursiere18 said:
Negative..This would be the one:
http://forum.xda-developers.com/showthread.php?t=2024207
you probably want to use the RAMC3
Click to expand...
Click to collapse
i tried to do that with pit file.. but doesnt work wirh
these message...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i attached 2 picture that on my phone
if you take a look one in odin mode ( download mode )
says:
PRODUCT NAME: GT-N7100
CUSTOM BINARY DOWNLOAD : YES (9 COUNT) this number keep getting up when i flash VZW stock rom...
CURRENT BINARY : CUSTOM
SYSTEM STATUS : CUSTOM
WARRANTY BIT : 0
AND
another picture is when power on this shows and not going further...
You messed up hard core. You have to do kabols unbrick method bro or that phones a paper weight.....
Sent from my SCH-I605 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2615587 here is the link. Good luck. Your gonna need it. That resistor is so small. Your only other option other than that is a 50 dollar jtag done by mobiletech
Sent from my SCH-I605 using Tapatalk
roflcoptersoisoi said:
You messed up hard core. You have to do kabols unbrick method bro or that phones a paper weight.....
Sent from my SCH-I605 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2615587 here is the link. Good luck. Your gonna need it. That resistor is so small. Your only other option other than that is a 50 dollar jtag done by mobiletech
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
even i could enter download mode its hard brick?:crying::crying::crying::crying::crying::crying::crying:
Pretty much.
Sent from my SCH-I605 using Tapatalk
Yup you did just about the only thing possible to brick this device. Never flash a bootloader for another device.
akellar said:
Yup you did just about the only thing possible to brick this device. Never flash a bootloader for another device.
Click to expand...
Click to collapse
I would say you could send me your phone and I could do the unbrick method for you. But I would feel terrible if I messed it up. It does work though. but i also have jewlers tools and all that jazz. Get it jtagged and be done.
I say it's fixable stop giving him a heart attack...
Odin a 4.1.2 stock rom on there with a .pit
Like the one you asked about before lol
Dude the guy that made the unbricker made it cause he did the same thing... it's not fixable without jtag or unbrick
Sent from my SCH-I605 using Tapatalk
Lacoursiere18 knows his stuff well. He suggested what I thought would fix it.
Previously last week Corean0213 had similar problem and got it fixed. My apologies I didn't see/overlooked he flashed GT-N7100 firmware on a SCH-1605 this week. Thinking he still didn't do the 4.3 OTA stock firmware I thought he could re flash with Odin. But guess he made a bigger boo boo then expected with wrong device firmware. uch:
OffTheChainz said:
Lacoursiere18 knows his stuff well. He suggested what I thought would fix it.
Previously last week Corean0213 had similar problem and got it fixed. My apologies I didn't see/overlooked he flashed GT-N7100 firmware on a SCH-1605 this week. Thinking he still didn't do the 4.3 OTA stock firmware I thought he could re flash with Odin. But guess he made a bigger boo boo then expected with wrong device firmware. uch:
Click to expand...
Click to collapse
Thanks.. I think the problem might be if that bootloader he flashed is locked down.. If it is then I don't think odin can write over it..
I wouldn't say jtag would not work. Best thing to do is call Josh over at mobile tech videos and he'll let you know..He is reasonable and a nice guy, he won't steer you wrong..
Sent from my SCH-I605 using xda app-developers app
Jtag will work. They would have to do the downgrade method where they remove the emmc Chip and flash it. Then proceed as normal
Sent from my RM-915_nam_usa_228 using Tapatalk
I shouldn't even of bothered but flashed a bootloader that was linked to me. Apparently the wrong one it's a n7100 and I have a i605. I've been told it's not locked and posted several times in the DN3 thread. What can I do?
thechaoz said:
I shouldn't even of bothered but flashed a bootloader that was linked to me. Apparently the wrong one it's a n7100 and I have a i605. I've been told it's not locked and posted several times in the DN3 thread. What can I do?
Click to expand...
Click to collapse
Your answer can be found in the 8th post of this thread.
Sent from my SCH-I605 using XDA Premium 4 mobile app