Related
Hi!
I saw that khold has recently posted the gsm ics ota. However it's only possible to flash it with rsd lite or similiar methods. I don't have access to a computer right now so is it possible to flash the ics update as a nandroid backup(if some one could upload it)?
My gsm razr is currenly running rooted 651.167.20.XT910.Retail.en.EU 6.1.5-167_SPU-15-M2
You can use this nandroid http://forum.xda-developers.com/showthread.php?t=1734893 it is "Latam" but works fine on european razr.
This rom is much better and faster than stock ics.
Just sayin'...
...
Well I don't want to try any roms cuz if anything goes wrong I'll be stuck without a phone for weeks
Firidan said:
Hi!
I saw that khold has recently posted the gsm ics ota. However it's only possible to flash it with rsd lite or similiar methods. I don't have access to a computer right now so is it possible to flash the ics update as a nandroid backup(if some one could upload it)?
My gsm razr is currenly running rooted 651.167.20.XT910.Retail.en.EU 6.1.5-167_SPU-15-M2
Click to expand...
Click to collapse
you can't flash a ics nandroid on a gb rom
Sorry to hear that. Guess I gotta borrow a computer somewhere.
BakaPhoenix said:
you can't flash a ics nandroid on a gb rom
Click to expand...
Click to collapse
oh, i didn't notice it was gb, sorry
My razr xt910 dont turn on(only red motorola screen), it chrased when I updated it to 4.1.2. . I used it (http://forum.xda-developers.com/showthread.php?t=2078021) that is my fault .
But please , if anyone have idea how to fix it just tell me !!!
(sorry for my bad language)
in that OP there are also instructions for coming back to ICS. you can read the entire thread to find more help
also, wrong section
You have to give more details. Do you have the customer Id error? What about bmm? Try a factory reset through stock recovery. Otherwise rsd back to ics
And you are on the wrong section. This is only for development.
Sent from my Motorola Galaxy s3 using Tapatalk 2
I have customer id error. What i else i can do ? Please help....
If i want go back to ics i need to restore cid file. now i cant .
This is not the right section.
You're spamming other thread.
And you want us to help you ?
ncck890 said:
I have customer id error.
Click to expand...
Click to collapse
I faced with exact the same situation after few days on JBX ROM.
Device did not boot to bmm and showed only cust. id error.
I was not able to restore EU CID and ICS kernel to boot to stock ROM.
In my case solution was to flash webtop partition from stock ICS fastboot from sbf.droid-developers.org using EternityProject's FastBoot FlashME utility.
In this case RSD will not able to flash stock ROM because you are with CDMA CID.
So after you flash webtop you should be able to boot to bmm and restore stock CID & kernel and then boot system_1 or revert to ICS.
Hope it helps and sorry for my english
You cab boot selecting BPTools
OMG i did it . Thanks for eveyone who posted there. I am really sorry for my topic there. I was scared , forgive me please!
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
SimonTWolf said:
I have an DROID RAZR XT910 GSM/CDMA with the following stock ICS: 673.94.328.XT910.Optus.en.AU, Version 4.0.4, Build 6.7.3-94_SPI-328 and while looking at all the mods and roms out there I'm not confident in flashing this device because the version numbers are different and I don't wanna brick my phone (at close to AUD$800 I think you can understand why) so need help with getting JB onto it (impatient here in OZ, last round from GB to ICS took 6 months from advertised to actually going OTA here). Phone is rooted, have Titanium Backup and SuperSU installed but:
1: don't know how to back up the whole stock in case of failure and need to reinstall
2: not sure that any ROMs are safe to use in my phone (differing stock numbers etc)
3: what other software needed to make this happen
Can anyone please help!?! (where's that old interrobang when you need it)
Click to expand...
Click to collapse
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Big UPS
philharmonick said:
Hi!
I'm an Aussie user but bought mine through Kogan (so it's a German phone). If you've already rooted the phone and have Stock ICS I'd recommend installing SS3.11 or BMM and running another JB ROM rather than try to flash stock.
There's heaps of threads with great ROMs on here and the Development thread:
http://forum.xda-developers.com/showthread.php?t=2162827
http://forum.xda-developers.com/showthread.php?t=2028020
Personally I use SS3.11 with CM10.1 as my daily and it's fine. I can also recommend AOKP4.22 which is now officially supported on XT910.
Benefit of this setup is that I can also boot back to stock whenever I want.
Cheers and happy flashing!
:victory:
Click to expand...
Click to collapse
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
SimonTWolf said:
many thanks, as I don't want to touch the stock at all I'm using this method (ss3 and aokp/cm10.1 tri-boot {keeping the stock I'll have three systems})
Click to expand...
Click to collapse
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
dabanhfreak said:
This is a bit late to see this thread, but there is a thread for the retail.au 4.1.2 official. If you do a search of the forum with "retail" and "au" you'll find it. Stock rom that needs to flash a kernel first.
First be sure to root if you're still on ICS. There's a one-click root tool in the development section.
Requires BMM 0.3.4, from there you can install the recovery and reboot into it. It allows you to do a nandroid backup.
Click to expand...
Click to collapse
thx mate, not impressed with AOKP or CM10 so hopefully the 4.1.2 official will keep me happy
Hello
I have this rom in my rom slot 3, just as I been told trough the official thread.
If I do a full backup of the ROM in Safestrap after installing all my programs and settings, can I then Restore it to the Stock Rom Slot?
I have always done this with all the other custom rom's with no problem, I do not want more than one ROM on my phone, call me weird...
Wouldn`t do that if I were you... These custom roms are hard coded to only work on specific slots. In case of Liquid Smooth, it only works on slot 3 for now, but that will probably be fixed soon.
BTW, I`ve flashed CM 10.1 accidentally on my stock slot (Was on custom ICS rom) and now I can`t boot on stock slot, only on CM 10.1 (slot 1) and Liquid Smooth (slot 3).
Facing some issues, trying to solve them, but no success so far...
kamikass said:
Wouldn`t do that if I were you... These custom roms are hard coded to only work on specific slots. In case of Liquid Smooth, it only works on slot 3 for now, but that will probably be fixed soon.
BTW, I`ve flashed CM 10.1 accidentally on my stock slot (Was on custom ICS rom) and now I can`t boot on stock slot, only on CM 10.1 (slot 1) and Liquid Smooth (slot 3).
Facing some issues, trying to solve them, but no success so far...
Click to expand...
Click to collapse
When this happens to me I always swallow my pride and go back to stock via RSDlite.
But I have always done like I said with all the custom roms, I have never had any problems after but the whole restore on stock rom slot.
But let's say, If I continue to use rom slot three. If I then go into Safestrap and format the stock rom slot, this will free up the space on mye phone right?
Not sure about that, but since you have usb working, you`ll always have RSD,.. My usb isn`t working, but I don't know if it's hardware or something messed up with stock slot...
kamikass said:
Not sure about that, but since you have usb working, you`ll always have RSD,.. My usb isn`t working, but I don't know if it's hardware or something messed up with stock slot...
Click to expand...
Click to collapse
What about making a backup file from the one rom you have working and restore it to stock rom slot? It will not boot on this slot at all?
I have been out in the dark maybe 100 times before, but I have never had usb not working??? Strange..
My case is that I'm on ICS on stock and on JB on rom slots...
I was wondering, did I mess my CID by installing JB over LATAM ICS, since there isn`t a LATAM JB release yet?
Anyways, sorry, completely out of topic here, so, let`s go to the point:
If you see me as a lab rat, you should know that I just tried flashing my working LiquidSmooth backup on stock slot, and didn`t work... At least for me...
kamikass said:
My case is that I'm on ICS on stock and on JB on rom slots...
I was wondering, did I mess my CID by installing JB over LATAM ICS, since there isn`t a LATAM JB release yet?
Anyways, sorry, completely out of topic here, so, let`s go to the point:
If you see me as a lab rat, you should know that I just tried flashing my working LiquidSmooth backup on stock slot, and didn`t work... At least for me...
Click to expand...
Click to collapse
Maybe you have to let the stock rom slot be, until there is a rot or rsd for Jelly Bean
Haha, lab rat!
I jus tried the same myself, but the device would not start so this does not work.
For now I have formated and wiped my stock rom slot, and I have liquid smooth in slot 3 wich will be my daily rom waiting for things to happen.
mr.lysgaard said:
Maybe you have to let the stock rom slot be, until there is a rot or rsd for Jelly Bean
Haha, lab rat!
I jus tried the same myself, but the device would not start so this does not work.
For now I have formated and wiped my stock rom slot, and I have liquid smooth in slot 3 wich will be my daily rom waiting for things to happen.
Click to expand...
Click to collapse
Yeah, but in my case no usb, so it`ll have to be via stock recovery...
Well, for now, since there`s no use for my stock slot, I`m gonna do the same as you...
Yeah, thinks it's the best when your stock rom is out of order!
But liquid smooth is a pretty neat rom, it makes me not wanna go back to the regular ics roms.
kamikass said:
Yeah, but in my case no usb, so it`ll have to be via stock recovery...
Well, for now, since there`s no use for my stock slot, I`m gonna do the same as you...
Click to expand...
Click to collapse
Btw, when I think about it I once had a usb not working with the first razr maxx I bought.
I do not remeber everything, but I fixed it trough a guide I found trough putting some files on my SD card and installing from there?
You know what tutorial I mean? Have you tried this?
No, haven`t seen it!
I was wondering, what happens if I install both TWRP and CWM recovery?
kamikass said:
I was wondering, what happens if I install both TWRP and CWM recovery?
Click to expand...
Click to collapse
Im not shure about this but I found this thread, someones has twrp and cwm installed
http://forum.xda-developers.com/showthread.php?t=2122152
can anyone help me here, i'm on 31 march build liquidsmooth. if i want to be on 4 april build, do i need to reflash it ? or it can be updated just like that ?
microcuts65 said:
can anyone help me here, i'm on 31 march build liquidsmooth. if i want to be on 4 april build, do i need to reflash it ? or it can be updated just like that ?
Click to expand...
Click to collapse
Some custom roms can be updatet sort of like your asking!
But you should make a habbit of always clean install custom roms, this way you get into troubles less often and the stability will often be better,,
Liquidsmooth 2.1 ROM - MMS FAIL
Hey guys can someone help me with this problem? I cant seem to send MMS like pictures and such. Is there a setting I have to change orrr? I have mobile network mode on LTE/CDMA/EvDo/GSM/WCDMA. Very frustrating. Help pleasseeeee Thank you
I think there's a post on the main thread about what to do if SMS doesn't work.
Sent from my DROID RAZR using Tapatalk 2
Hey guys,
i have a problem with my phone (Droid Razr, XT910 with Stock Android 4.1.2).
Today I decided to root my phone and install a custom rom.
At first I got root, then I have rebooted my phone and everything workes OK.
After that I installed RazrTouchBlack.apk and clicked on "Install Clockworkmod touch" and afterwards "reboot cwm touch".
The phone made a reboot and i backed up my system with the backup function in cwm.
Then i did a reboot and the Error "Encryption unsuccessful" occurs:
I tried to use the "Reset phone" function but after the next reboot the same error occurs again.
At next I tried to open the "Recovery" but that screen comes up:
After hours of searching the Net I haven't any idea anymore.
May someone help me?
Thanks in advance
http://forum.xda-developers.com/showthread.php?t=2312054
Look out into this thread ive answered out there , this may help ya to fix ya phone .
If still ya have any question ya can ask here .
Please hit the thanks :thumbup: if i ever helped ya !!
Thanks, I'll try this
EDIT: AWESOME that worked fine. Thanks a lot
Ya most welcome bro !!
Please hit the thanks :thumbup: if i ever helped ya !!
How can i get CWM to work?
I tried RazrTouchBlack.apk and RazrBootstrap.apk
Is this "Encryption" a Feature/Bug which can be turned off?
Avoid using CWM.
Use Safestrap or BMM instead.
Sent from my XT912 using Tapatalk 2
Ok, thanks. I'll give Safestrap a try.
Safestarp is better then cwm but if still ya want cwm just use bootstrap to install cwm . Thats pretty easier
Please hit the thanks :thumbup: if i ever helped ya !!
Hey, I have the same problem except my firmware is telcelmx, not sure the exact, i only know its MX any help on wich firmware do i need to use? Thanks in advance.
can't solve the problem
anurag.dj2u said:
http://forum.xda-developers.com/showthread.php?t=2312054
Look out into this thread ive answered out there , this may help ya to fix ya phone .
If still ya have any question ya can ask here .
Please hit the thanks :thumbup: if i ever helped ya !!
Click to expand...
Click to collapse
Hi Anurag,
Thanks for your help.
I have the same problem with this Encryption Unsuccessful message.
I flashed the new MIUI v. 3.9.27 on my XT910. I followed the instructions as I always do, but can't get pass this screen.
I also tried Android Razr HD Utility and sometimes it allows me to use my phone, but whenever I have to reboot it, it goes straight to the AP fastboot screen.
I've tried to flash an ICS ROM just to restart it all, but it says my phone is locked and I can't flash it.
And if I can choose to go to recovery, appears this screen with android and the red triangle, like a dead end.
I'm a complete noob, but I can follow the steps, hehehe. If you could help me out here, and point me some tutorial to get out of this mess, I will apreciate.
Thanks
Lucas
Hi Lucas,
to restore your phone you have to restart from a clean installation from rsd .. Here
http://forum.xda-developers.com/showthread.php?t=2231289 you can find the complete instrucrion to how to.
When you are on clean JB follow this
http://forum.xda-developers.com/showthread.php?t=2257137 to root your phone and install BMM from market.
OK now you have your phone rooted and with custom recovery and you can install every ROM do you want! Enjoy!
Sent from my XT910 using xda app-developers app
If I was helpful please hit thanks!
Lucas Martins Moreira said:
Hi Anurag,
Thanks for your help.
I have the same problem with this Encryption Unsuccessful message.
I flashed the new MIUI v. 3.9.27 on my XT910. I followed the instructions as I always do, but can't get pass this screen.
I also tried Android Razr HD Utility and sometimes it allows me to use my phone, but whenever I have to reboot it, it goes straight to the AP fastboot screen.
I've tried to flash an ICS ROM just to restart it all, but it says my phone is locked and I can't flash it.
And if I can choose to go to recovery, appears this screen with android and the red triangle, like a dead end.
I'm a complete noob, but I can follow the steps, hehehe. If you could help me out here, and point me some tutorial to get out of this mess, I will apreciate.
Thanks
Lucas
Click to expand...
Click to collapse
Are You Using RSDlite To flash?
Thank you Vince.
I managed to flash a stock Moto JB ROM back to my phone and I was wondering how to root it again.
Nick, yes. I was using RDS Lite and I finally did it. I don't know exactly what I did differently. But it worked.
Now I am wondering If I should try again to flash MIUI or if I will stick to this lousy Motorola ROM.
Should I?
Thanks again!
Lucas
I have used for so long the MIUI on my old DHD first and on the RAZR later, and i can say that is not the best rom ever, because it's based on stock kernel. yes you can change UI, manage options etc but if the kernel is the same I think is not a good job. I can reccomend the CM. The 10.1 is JB 4.2.2 based and it's stable version, the 10.2 is JB 4.3 based and it's a nightlies, but i run the last one and use it for daily use with the JBX Kernel with no problem. Try and give a look on the development thread there are a lot of roms that you can try!
Have a nice mod! :good:
vince686 said:
I have used for so long the MIUI on my old DHD first and on the RAZR later, and i can say that is not the best rom ever, because it's based on stock kernel. yes you can change UI, manage options etc but if the kernel is the same I think is not a good job. I can reccomend the CM. The 10.1 is JB 4.2.2 based and it's stable version, the 10.2 is JB 4.3 based and it's a nightlies, but i run the last one and use it for daily use with the JBX Kernel with no problem. Try and give a look on the development thread there are a lot of roms that you can try!
Have a nice mod! :good:
Click to expand...
Click to collapse
I'll give it a try tonight. Thanks!
dont use that junk CWM stuff as it will brick your phone