Bluetooth Settings - AT&T HTC One (M7)

Well, since search is "temporarily unavailable" (again) on XDA, I am posting a new thread.
The little quirk I am running into is in the BT settings. When connecting to a BT headset, it allows you profiles to choose. I don't want to have media audio through my Plantronics headset so I uncheck that option in profiles. However, it doesn't stick and resets itself after a while to include the media audio. Sometimes it does it after a reboot, but other times it just does it.
Has anyone else ran into this?

Related

Bluetooth a2dp & headset conflict

Hi,
I use my iMate Startrek with a set of a2dp headphones (the iMuffs), and I have to manually tell the phone to connect to the iMuffs using a2dp through the "Set as wireless stereo" option in the settings, can this be done automatically?
Another thing is that if I get a call while listening to music, the microphone on the headset doesnt work very well, and I have to shout for the person to hear me. I think that the mic in the headset is not being used. Has anybody had this problem and solved it?
Does anyone know if there are some registry settings that need to be tweaked to get these problems solved?
Thanks a lot.
I use an itech s38 and doesn't have a problem with the mic.
I do have problems with automatic connections.
after setting up properly, if the headset gets disconnected,
the next time it reconnects by itself is always on the headset profile
and mostly only connects if i make a call
So even when no indicator is shown I would assume that seconds
before ther call is answered the sound would be transfered to the headset
that's not so much of a problem
what really sickens me is that if i wanted to
listen to music via the headset when headset profile is connected
i would have to
1.hit the stick once to go to comm manager
2.hit "2" to turn off BT
3.exit to make sure action is done
4.hit center to go to comm manager again
5.hit "2" turn it on (making sure it doesn'ty connects to headset profile first)
6.hit Settings to go to BT settings (hit one or enter to getto that's two presses)
4.hit menu
5.hit devices
6.hit menu
7.hit set as wireless stereo
8.hit done
9.hit done again
10.hit exit
11.hit start
12.hit windows media
13.mess another big while in windows media playlists
..........
now that's too much ... many places i could use the home button
to exit quickly .. that's not what's frustating
what i need actually is a shortcut to the BT devices page
and a smarter profile to connect to wireless stereo for me
without having to turn off headset profile first
I am using HP Stereo Bluetooth headset with my QTEK 8500. It works fine besides the reconnection. If I turn the headset off in order to reconnect I have to go to the BT settings and set the headset to Stereo Headset again. I beleive your problem ocurs because your headset is also a handsfree headset, which HP is not.
I do beleive this behaviour is by design. Although I do not seen to understand the logic behind it.

[Q] Bluetooth Autoconnect Issues

I see there are a lot of posts about this for the Galaxy S III but not the DNA.
Coming from the Bionic I have been very happy with the DNA in all areas except the Bluetooth! For whatever reason after pairing my car (2012 Impreza) or headset all subsequent Bluetooth connections must be done manually. I tried the Bluetooth auto connect app and its hit or miss. For the time being I am using Widetoid and created a shortcut to Bluetooth settings in the notification bar.
I tried about everything I could find that was attempted for the S3 with no luck.
Has anyone else encountered this or have any ideas on how to fix.
Thanks
No one here?
Sent from my HTC6435LVW using xda app-developers app
I just got a Bluetooth audio adapter for my car to play music and it pairs automatically once the Bluetooth receiver gets power, at least it has so far, ive only used it a few times now, but it looks like its automatic for me.
I can report a similar problem. My 2011 Mitsubishi has a built in multimedia/nav system which always paired perfectly with my Thunderbolt for calls and music. The DNA connects automatically for phone calls, but not for music. When I'm in my car, I can go into bluetooth settings see that it is connected and "phone audio" and "media audio" are both checked, but media audio does not work (my car reports 'no connection'). In order to get media audio to work I have to un-check and then re-check "media audio" while it is connected to the car. I assumed this was a bug in my car's system, but maybe not...

[Q] Bluetooth settings keep resetting to media & phone

Hi there,
I like to stream music through my headphone jack to my car when I'm driving, but still use my bluetooth headset. So I've setup the bluetooth settings to disable media through bluetooth but to allow phone. Problem is, every time my bluetooth reconnects to my phone, it resets those settings and it starts streaming music through my headset...
Is anyone else having these issues? Is there a solution?
Thanks
I've noticed the exact same behavior; would it be considered a bug? If so, does HTC have an avenue to receive bug reports?
On other Android phones I have/had, when you disable a particular Bluetooth profile for a device, it seems to remember that upon reconnection.
Get "Bluetooth auto connect " on play store. By Jacob Klos. GREAT APP!!! Used 2+years. Sets profiles and more. Also has tasker plugin and frequent updates. Free app
Hope this helps. Hit thanks if you wish. Cheers
(clever signature_here)

Bluetooth call volume low in car.

I cant seem to turn up the in call volume past 15, it always reverts back. I was able to fix it once by unpairing it then re-pairing, but that only lasted until I reconnected. Had the same issue with my S8.
My equalizer in the settings is set to normal.
Headunit: DDX774BH
No other devices connected to phone or headunit.
If this is a bluetooth connection,
From settings, do a search for bluetooth.
Try changing the Disable Absolute Volume option
also, from the Settings, bluetooth, 3dots, try changing the Media volume sync option
Ugh, same problem for me with a Kenwood HU. No solution yet, including the one mentioned above.

Bluetooth call & media audio seem to conflict, call always work, media not so much

Bluetooth call & media audio seem to conflict, call always work, media not so much
Hello,
I'm on the Z5 Compact (6.0.1) and using the Jabra Stealth as my headset. Automatically both Call and Media Audio are always turned on, but sometimes, only the Call Audio works. And for it to work, I need to disable the Call Audio. But this means that next time I'll connect the device, only Media Audio will be turned on, rendering my BT device useless next time I get a call.
Now, I think I found a work around with Bluetooth Auto Connect, which appears to reset the profile to Call + Media at each connection. But I still need to disable Call Audio everytime Media doesn't work.
So, questions:
What the **** is this all about? No thread seem to be able to answer that question.
Would Tasker be able to do the following: If device connects outside of incoming call, activate Media Audio Only, if else activate Call + Media?
Would there be any other app that could solve my problem?
I personally despise Tasker, I found much simpler solutions with MacroDroid. But Tasker does have potential.
I looked around and found that this problem was recurrent amongst users, despite of brand or version.

Categories

Resources