Hi it is the first time that i try to flash a custom rom everything was going well but when the installation finished i got error 0 installation aborted and my phone bootloop.
How to fix that?
thanx in advance
waheed94 said:
Hi it is the first time that i try to flash a custom rom everything was going well but when the installation finished i got error 0 installation aborted and my phone bootloop.
How to fix that?
thanx in advance
Click to expand...
Click to collapse
Redownload the rom, maybe some error while you download in the first time.
mauam said:
Redownload the rom, maybe some error while you download in the first time.
Click to expand...
Click to collapse
Thanks problem solved by redowloading the rom
Related
when trying to install a custom rom from cwm recovery always gives me the error status 7 installation aborted, why?
Thanks
Redownload and try again.
Have the same problem, redownload doesn't solve the issue.
duke_droid said:
Have the same problem, redownload doesn't solve the issue.
Click to expand...
Click to collapse
The same for me, always error 7, instalation aborted.
CWm again
FlasH cwm Again if u r using cwm5 revert back to previous version d try again
Click thnkz if i helped[/SIZE]
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
You have wiped system.
Do never wipe system. It is used to verify that you are trying to install it on the correct device.
Rapier07 said:
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
that doesnt work
DavidMKD said:
that doesnt work
Click to expand...
Click to collapse
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
hnl_dk said:
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
Click to expand...
Click to collapse
still the same error. I tried that even when I had the first error.
DavidMKD said:
still the same error. I tried that even when I had the first error.
Click to expand...
Click to collapse
The first error is because system has been wiped, so it will only help, if the assert has been removed.
What you could do, is to try to temporarily install a ROM, that does not check for what device it is installed on.
When that is done, are you able to install the FXP ROM, as the other one will setup a new system partition.
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
thebrainkafka said:
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
Click to expand...
Click to collapse
You may not wipe/format system.
The installation does need system, so make sure that it is installed on the correct phone.
So never wipe/format system yourself.
If it is needed, will the install script do it by itself, when it is needed.
Ok, and there are no issue with older files Which maybe not cleared during Installation when going from gb to ics?
Thx
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
This may hep you
sau94 said:
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Click to expand...
Click to collapse
I had the same problem when I was flashing MIUI rom weekly update to my Galaxy S3.
When I had this error, I was using CWM Recovery then I flashed Philz Recovery.
I tried to flash ROM again, and It was OK.
I hope, it works for you, too.
oOWeaponXOo said:
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
Click to expand...
Click to collapse
i got some problem too.. can u explain more details? replace "update-binary" from stock ICS rom or from other rom? my device st25i (xperia u) with xnovathor 4.4.2 Custom rom, i would down grading to Xmiui v4 ICS.
hi =) i know maybe its late but ot end this problem and to let know how to solve to anyway will got this issue the solution is to check ,before flashing the zip, the box to allow the installation of old binaries, it works with an i8260
I have a Rooted Galaxy S3. Can anyone tell me the steps required to flash the Imperium v12.2 ROM?
I have the official firmware I9300XXEMC2, will I have a problem with the bootloader or something like that? Can I flash it with Mobile ODIN or must be in CWM?
Thanks
blinkx said:
I have a Rooted Galaxy S3. Can anyone tell me the steps required to flash the Imperium v12.2 ROM?
I have the official firmware I9300XXEMC2, will I have a problem with the bootloader or something like that? Can I flash it with Mobile ODIN or must be in CWM?
Thanks
Click to expand...
Click to collapse
I assume you are talking about this rom, as there are no special instructions in that thread, follow the guide to flash a rom (depending on what format the rom is in (zip, or md5), you can use CWM or Odin/Mobile Odin)
edit: sorry, just saw that it has an Aroma installer, hence CWM is the way to go.
thanks
Thanks for answering.
That is the Rom that I'm trying to flash.
I tried once with CWM, BUT! The flashing process went wrong. I just follow the steps in Aroma installer and when I click continue the flashing process begins and the phone reboots and the samsung logo appears, but nothing more happend.
I had to restore the firmware :s ...
Any help?
blinkx said:
Thanks for answering.
That is the Rom that I'm trying to flash.
I tried once with CWM, BUT! The flashing process went wrong. I just follow the steps in Aroma installer and when I click continue the flashing process begins and the phone reboots and the samsung logo appears, but nothing more happend.
I had to restore the firmware :s ...
Any help?
Click to expand...
Click to collapse
I guess you did a full wipe before? If not do so and try again.
Thanks
chrismast said:
I guess you did a full wipe before? If not do so and try again.
Click to expand...
Click to collapse
@chrismast Yes, I did a full wipe before flashing...
Aroma installer gets frozen in some parts of the installation process...
After trying a lot, finally I did it!
Good custom ROM
Thanks @chrismast
hello i tried to flash a custom rom somehow instalation aborted i reboot my phone and now its stuck on se screen tried a lot of methods couldnt work can u give me a simple tutorial steps to fix that?
kpassaris said:
hello i tried to flash a custom rom somehow instalation aborted i reboot my phone and now its stuck on se screen tried a lot of methods couldnt work can u give me a simple tutorial steps to fix that?
Click to expand...
Click to collapse
Update your Phone by using Sony ericsson update service..install it from http://www.sonymobile.com/gb/tools/update-service/
Then follow the instructions and everything will work fine..all d best:good:
kpassaris said:
hello i tried to flash a custom rom somehow instalation aborted i reboot my phone and now its stuck on se screen tried a lot of methods couldnt work can u give me a simple tutorial steps to fix that?
Click to expand...
Click to collapse
unlocked the bootloader?
hi all, i'm trying to install cm 11(weekly7) nypon on Xperia P...bootloader unlocked, rooted, cwm 6.0.1.2.
i've done fastboot kernel of cyano but when i go to recovery and i start to install cyano, it gives me error status 7 installation aborted, and above there's repeated "getprop,ecc.."(i think the error is it here). could anyone help me, please?
Federicogs3 said:
hi all, i'm trying to install cm 11(weekly7) nypon on Xperia P...bootloader unlocked, rooted, cwm 6.0.1.2.
i've done fastboot kernel of cyano but when i go to recovery and i start to install cyano, it gives me error status 7 installation aborted, and above there's repeated "getprop,ecc.."(i think the error is it here). could anyone help me, please?
Click to expand...
Click to collapse
Delete the assert lines from your updater script
Update to a newer version of recovery since older recoveries don't support selinux.
Regards
MasterAwesome
MasterAwesome said:
Delete the assert lines from your updater script
Update to a newer version of recovery since older recoveries don't support selinux.
Regards
MasterAwesome
Click to expand...
Click to collapse
thanks, but i can't find a newer cwm...can you help me?
Federicogs3 said:
thanks, but i can't find a newer cwm...can you help me?
Click to expand...
Click to collapse
If your current recovery gives status 7 that means your recovery is good To go... Try deleting the asset statements in the top of updater script.
Regards
MasterAwesome
unfortunatly the phone doesn't restart the system because of cyano kernel, i've recover stock rom and i'll repeat all the procedures!
It's taking too longer to save the modified "updater script"...more than 30 minutes and it stills going on!
edit: i've downloaded zipplus because winzip gets stuck, now there's no problem and cyano is fantastic! thanks #MasterAwesome
Federicogs3 said:
unfortunatly the phone doesn't restart the system because of cyano kernel, i've recover stock rom and i'll repeat all the procedures!
It's taking too longer to save the modified "updater script"...more than 30 minutes and it stills going on!
edit: i've downloaded zipplus because winzip gets stuck, now there's no problem and cyano is fantastic! thanks #MasterAwesome
Click to expand...
Click to collapse
No problem.. I'm here to help
Regards
MasterAwesome