Is there a way of doing this? Runnig 4,1,2 with the system version 982.124.14.XT910.Retail.en.AU with custom rom DSEA0588 v1.22en.
I do got BMM 0.3.4 installed and I am rooted.
Yeah there are so many custom ROMs are available in development section . Try to flash that if ya rooted
If ya don't have root privilege then ya need to wait because probably there are very rare chances to released 4.2.2 upgrade in next 2-3 months .
Hit the thx button if i helped ya in anyways
Well, OP says he's got BMM so he's gotta have root. Installing a 4.2.2 rom is the same as any other - I'd suggest LiquidSmooth - it's the most complex and good looking one of them (IMO of course).
dubisz said:
Well, OP says he's got BMM so he's gotta have root. Installing a 4.2.2 rom is the same as any other - I'd suggest LiquidSmooth - it's the most complex and good looking one of them (IMO of course).
Click to expand...
Click to collapse
Ooops !!! My bad i did noy see that he got bmm and he is rooted ... . M even using liquidsmooth . I really love its ui and it kinda faster then rest ( my opinion )
Thx by the way for informing me .
Hit the thx button if i helped ya in anyways
NP. You might want to combine it with JBX kernel - I'm using it's battery saver edition and it works pretty damn good!
Alright thanks, so I just have to flash a rom, Can I then Relfash a rom with 1,2,2 if I wanted to?
baxtex said:
Alright thanks, so I just have to flash a rom, Can I then Relfash a rom with 1,2,2 if I wanted to?
Click to expand...
Click to collapse
Yeah, cause all 4.2.2 roms are kexec (have their own kernels embedded), you still remain on 4.1.2 kernel for older roms.
Okay
baxtex said:
Okay
Click to expand...
Click to collapse
That sound work if you do that
I'm still on my old rom, (the one in OP) but can i Flash for example the the battery saver kernel?
http://forum.xda-developers.com/showthread.php?t=2223517
baxtex said:
I'm still on my old rom, (the one in OP) but can i Flash for example the the battery saver kernel?
http://forum.xda-developers.com/showthread.php?t=2223517
Click to expand...
Click to collapse
I think the kernel ya link up is only working with cm10 and liquid smooth.
Make a backup and then try to flash , in case if it doesn't work and ya stuck somewhere or ya get bootloops then restore ya backup.
Thay kernel is really batterysaver because i used it long back when when i had rooted RAZR
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Okay, that's what I thought. Liquid Smooth looks like a nice rom but there seems to be many people expericencing it unstable. Think I will wait a little while for a better version of it. Thanks.
Flashed it but it didn't work. Used my backup.
Related
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
aussiesausage said:
hey guys
just got my X10 back from repairs, just wondering whats a good ROM to install on it?
cheers
Click to expand...
Click to collapse
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
I have stock 2.1 + jit - junk apps, and Very nice, i waiting for a 2.3+ camera
Mr Patchy Patch said:
I can strongly recommend Wolfbreaks CM V4.3. That is a fantastic ROM and hasn't caused me any issues.
I find it much better than FreeX10 Beta4
Click to expand...
Click to collapse
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
i use this one.....and never had a problem....
aussiesausage said:
i tryed to install that, but it constantly has a boot loop
the phone lasts 20 seconds then goes to cyogen mod ( spelling? ) then back to phone ect
tryed factory reset, delvik cache ect but didn't work
installed it 3 times to
Click to expand...
Click to collapse
Did u flash the correct baseband?
Mr Patchy Patch said:
Did u flash the correct baseband?
Click to expand...
Click to collapse
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
aussiesausage said:
it didnt tell me to? or i missed it
which one do i flash and where do i get it? i cant find nothing
Click to expand...
Click to collapse
What baseband are you on? .54 or .55?
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=945264
alankstiyo said:
I wanted to reinstall cm7 but hate flashing base bands xD
for that cm4? where's the link??? and what are the bugs so far?
Click to expand...
Click to collapse
Eh - have a read, and if you have issues use the "SEARCH" button.
http://forum.xda-developers.com/showthread.php?t=911364
will give it a try but still got to flash my bb xD
@nadiros trust me I read a lot of threads with roms, and the version confused me, when I saw the link i was like "oh, so that one is the rom"
not asking about the link cause i'm lazy
alankstiyo said:
will give it a try but still got to flash my bb xD
Click to expand...
Click to collapse
What baseband are you on??
Try letting the boot screen loop run for a few minutes. I recently reinstalled wolf's CM2.2 again and it looped a good 6 or so times before actually loading up.
Also make sure that you are on the latest firmware, Wolf's rom requires it
EDIT:: lol I don't know why my post was so late.. guess all the questions were answered.
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
aussiesausage said:
i got no idea what base band im on, downloading a 2.1 ROM for the new flash tool
ps, stop hijacking my thread, go make your own, i need help here damnit
Click to expand...
Click to collapse
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Mr Patchy Patch said:
What baseband are you on??
Click to expand...
Click to collapse
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Mr Patchy Patch said:
Go into settings, about phone, and tell me what the baseband version is. Once you tell me that, Ill make a .zip file with all the appropiate files to flash with xrecovery.
Click to expand...
Click to collapse
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
aussiesausage said:
gotta re-flash a 2.1 ROM, went to install something but installed a ROM i had on my SD card for a desire HD, didnt end to well haha!
Click to expand...
Click to collapse
LOL! ok, well im gonna be up for a while, so if your on the same baseband as me I already have all the files on my computer so I can quickly make you a .zip file with all the proper files to flash.
alankstiyo said:
on .54 so far, but getting a lot of troubles since the last time I flashed to .52 for cm7
somehow when I came back to stock rom my x10 has no signal at all :S
don't really trust on flashing bb cause seems in Mexico they're not welcomed xD (note I have no idea in which rom mex x10s are)
Click to expand...
Click to collapse
Ok, im on .54 as well and the ROM works awesome. no need to change your baseband to flash that ROM. Just download the proper files.
Ok - so I've got everything all set to try my first rom.. Think I'll go w/ Ineffabilis as I don't mind sense and theirs seems to be nice and un-crapified as well as includes a working WFT. My question is about kernels- in reading other threads it seems there is a lot of oddities going on with not only the kernel flashing process, but the kernels themselves.. If I'm going to give Ineffabilis a go - as of today anyways- should I stick w/ his rooted stock? Ziggy? Thoughts?
if u can see my signature..i set up mine jus the way i wanted it..and not a single random REBOOT or and BOOT LOOP wat so ever..everything is perfect but only one con which is my battery barely makes it through the day n where i live theres no 4g at all..but everything else is very stable
Cool- just finished up putting in on w/ stock and so far so good but maybe I'll try dsb.. Still a little unsure about the kernel update process so I've got some more homework to do.
Naisaelee21 said:
if u can see my signature..i set up mine jus the way i wanted it..and not a single random REBOOT or and BOOT LOOP wat so ever..everything is perfect but only one con which is my battery barely makes it through the day n where i live theres no 4g at all..but everything else is very stable
Click to expand...
Click to collapse
Im thinking of trying this ROM as well, but I have a question. Does the kernal HAVE TO be flashed after the ROM or is their a kernel included IN the ROM? Just not sure if the kernel is posted for those who want to revert to stock kernels...
Thanks
Oldsteel....... the rom comes included with a stock rooted kernel and they also have the kernel posted as well.
stm_ said:
Oldsteel....... the rom comes included with a stock rooted kernel and they also have the kernel posted as well.
Click to expand...
Click to collapse
thats what i figured. Ty sir
no problem
Just got a RAZR and I love it, I've already rooted it but I'm having trouble understanding safe strap and boots trap and can I install clockworkmod recovery as much info on installing and what they are would help a lot?
I had a htc desire hd before this which everything was so much easier
Thanks in advance
kyaldearing said:
Just got a RAZR and I love it, I've already rooted it but I'm having trouble understanding safe strap and boots trap and can I install clockworkmod recovery as much info on installing and what they are would help a lot?
I had a htc desire hd before this which everything was so much easier
Thanks in advance
Click to expand...
Click to collapse
Install BMM (BOIT MENU MANAGER) Iys more secure then any others like ss or cmw . Now a days nost of the custom roms are coming for bmm only so look around in devlopment section fo it
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Install BMM (BOIT MENU MANAGER) Iys more secure then any others like ss or cmw . Now a days nost of the custom roms are coming for bmm only so look around in devlopment section fo it
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
I disagree.. Safe strap is much more forgiving than BMM, And I've yet to see more than 1-2 ROMs for only BMM. Safe strap is supported on almost every RAZR ROM that I've seen. Also, if you screw up, Safe strap can normally (see: "normally") still allow you to have a working system.
Safestrap is safer, bootmenu has a few more options... Use one of the two depending con which ROM you want...
Sent from my XT910 using xda premium
I figured out BMM faster than SS, which happened to soft-brick my phone. Also, I replaced stock ICS with JB on BMM, which I couldn't figure out on the other one.
BMM can install any ROM you want. Just use System 2, and kexec roms (for not to flash jb kernel) and you'll never loose your stock one.
vato_bth said:
BMM can install any ROM you want. Just use System 2, and kexec roms (for not to flash jb kernel) and you'll never loose your stock one.
Click to expand...
Click to collapse
Thank you everyone for your help.
I updated my phone to stock 4.1.2 so no i have to wait till someone comes out with a way to root it.
Again thanks for the help
kyaldearing said:
Thank you everyone for your help.
I updated my phone to stock 4.1.2 so no i have to wait till someone comes out with a way to root it.
Again thanks for the help
Click to expand...
Click to collapse
There is a way to root 4.1.2. Just use matts utility 1.9 to root it! It should be in the dev section!
blackops11252 said:
There is a way to root 4.1.2. Just use matts utility 1.9 to root it! It should be in the dev section!
Click to expand...
Click to collapse
i cant seem to find anything besides 1.82.
i tried this http://www.droidrzr.com/index.php/topic/6924-root-achieved-for-jb-ota-razrmaxx-xt912-razr-blade/ and its not working
Hey guys,
i have a problem with my phone (Droid Razr, XT910 with Stock Android 4.1.2).
Today I decided to root my phone and install a custom rom.
At first I got root, then I have rebooted my phone and everything workes OK.
After that I installed RazrTouchBlack.apk and clicked on "Install Clockworkmod touch" and afterwards "reboot cwm touch".
The phone made a reboot and i backed up my system with the backup function in cwm.
Then i did a reboot and the Error "Encryption unsuccessful" occurs:
I tried to use the "Reset phone" function but after the next reboot the same error occurs again.
At next I tried to open the "Recovery" but that screen comes up:
After hours of searching the Net I haven't any idea anymore.
May someone help me?
Thanks in advance
http://forum.xda-developers.com/showthread.php?t=2312054
Look out into this thread ive answered out there , this may help ya to fix ya phone .
If still ya have any question ya can ask here .
Please hit the thanks :thumbup: if i ever helped ya !!
Thanks, I'll try this
EDIT: AWESOME that worked fine. Thanks a lot
Ya most welcome bro !!
Please hit the thanks :thumbup: if i ever helped ya !!
How can i get CWM to work?
I tried RazrTouchBlack.apk and RazrBootstrap.apk
Is this "Encryption" a Feature/Bug which can be turned off?
Avoid using CWM.
Use Safestrap or BMM instead.
Sent from my XT912 using Tapatalk 2
Ok, thanks. I'll give Safestrap a try.
Safestarp is better then cwm but if still ya want cwm just use bootstrap to install cwm . Thats pretty easier
Please hit the thanks :thumbup: if i ever helped ya !!
Hey, I have the same problem except my firmware is telcelmx, not sure the exact, i only know its MX any help on wich firmware do i need to use? Thanks in advance.
can't solve the problem
anurag.dj2u said:
http://forum.xda-developers.com/showthread.php?t=2312054
Look out into this thread ive answered out there , this may help ya to fix ya phone .
If still ya have any question ya can ask here .
Please hit the thanks :thumbup: if i ever helped ya !!
Click to expand...
Click to collapse
Hi Anurag,
Thanks for your help.
I have the same problem with this Encryption Unsuccessful message.
I flashed the new MIUI v. 3.9.27 on my XT910. I followed the instructions as I always do, but can't get pass this screen.
I also tried Android Razr HD Utility and sometimes it allows me to use my phone, but whenever I have to reboot it, it goes straight to the AP fastboot screen.
I've tried to flash an ICS ROM just to restart it all, but it says my phone is locked and I can't flash it.
And if I can choose to go to recovery, appears this screen with android and the red triangle, like a dead end.
I'm a complete noob, but I can follow the steps, hehehe. If you could help me out here, and point me some tutorial to get out of this mess, I will apreciate.
Thanks
Lucas
Hi Lucas,
to restore your phone you have to restart from a clean installation from rsd .. Here
http://forum.xda-developers.com/showthread.php?t=2231289 you can find the complete instrucrion to how to.
When you are on clean JB follow this
http://forum.xda-developers.com/showthread.php?t=2257137 to root your phone and install BMM from market.
OK now you have your phone rooted and with custom recovery and you can install every ROM do you want! Enjoy!
Sent from my XT910 using xda app-developers app
If I was helpful please hit thanks!
Lucas Martins Moreira said:
Hi Anurag,
Thanks for your help.
I have the same problem with this Encryption Unsuccessful message.
I flashed the new MIUI v. 3.9.27 on my XT910. I followed the instructions as I always do, but can't get pass this screen.
I also tried Android Razr HD Utility and sometimes it allows me to use my phone, but whenever I have to reboot it, it goes straight to the AP fastboot screen.
I've tried to flash an ICS ROM just to restart it all, but it says my phone is locked and I can't flash it.
And if I can choose to go to recovery, appears this screen with android and the red triangle, like a dead end.
I'm a complete noob, but I can follow the steps, hehehe. If you could help me out here, and point me some tutorial to get out of this mess, I will apreciate.
Thanks
Lucas
Click to expand...
Click to collapse
Are You Using RSDlite To flash?
Thank you Vince.
I managed to flash a stock Moto JB ROM back to my phone and I was wondering how to root it again.
Nick, yes. I was using RDS Lite and I finally did it. I don't know exactly what I did differently. But it worked.
Now I am wondering If I should try again to flash MIUI or if I will stick to this lousy Motorola ROM.
Should I?
Thanks again!
Lucas
I have used for so long the MIUI on my old DHD first and on the RAZR later, and i can say that is not the best rom ever, because it's based on stock kernel. yes you can change UI, manage options etc but if the kernel is the same I think is not a good job. I can reccomend the CM. The 10.1 is JB 4.2.2 based and it's stable version, the 10.2 is JB 4.3 based and it's a nightlies, but i run the last one and use it for daily use with the JBX Kernel with no problem. Try and give a look on the development thread there are a lot of roms that you can try!
Have a nice mod! :good:
vince686 said:
I have used for so long the MIUI on my old DHD first and on the RAZR later, and i can say that is not the best rom ever, because it's based on stock kernel. yes you can change UI, manage options etc but if the kernel is the same I think is not a good job. I can reccomend the CM. The 10.1 is JB 4.2.2 based and it's stable version, the 10.2 is JB 4.3 based and it's a nightlies, but i run the last one and use it for daily use with the JBX Kernel with no problem. Try and give a look on the development thread there are a lot of roms that you can try!
Have a nice mod! :good:
Click to expand...
Click to collapse
I'll give it a try tonight. Thanks!
dont use that junk CWM stuff as it will brick your phone
So, i been hearing custom roms offer the best smoothness, battery, Snappiness So what do you guys recommend =) ? I still want my BL to be locked =) I got my recovery & root much better battery in the rom is a BIG +
Croize said:
So, i been hearing custom roms offer the best smoothness, battery, Snappiness So what do you guys recommend =) ? I still want my BL to be locked =) I got my recovery & root much better battery in the rom is a BIG +
Click to expand...
Click to collapse
i found existenz, monxdified and my roms are good
existenz- got alot of modded apps hence improving smoothness, nice unique apps n all
romaur- tweaked, kinda buggy, has some nice features, fairly smooth
monxdified- tweaked, modded, quite nice
Envi-Rom- outdated but heavily tweaked, got alot of camera tweaks n all
try some roms, and find one you like
also note, this may sound like self advertisement because it kinda is, i try very hard to improve camera and battery life in my roms, for z2 it is outdated though which ill be trying to update it soon
Envious_Data said:
i found existenz, monxdified and my roms are good
existenz- got alot of modded apps hence improving smoothness, nice unique apps n all
romaur- tweaked, kinda buggy, has some nice features, fairly smooth
monxdified- tweaked, modded, quite nice
Envi-Rom- outdated but heavily tweaked, got alot of camera tweaks n all
try some roms, and find one you like
also note, this may sound like self advertisement because it kinda is, i try very hard to improve camera and battery life in my roms, for z2 it is outdated though which ill be trying to update it soon
Click to expand...
Click to collapse
Ye ive seen yours, Thats why im waiting wery much so to try it, So dont worry, Already got a plan on it, Whenever i can :/ Consider the firmwire
Im always scared to flash roms on a new phone when you dont know much about it.. The list is so long usually what to do, Cause it doesnt seem that you can just flash and run like im used to :/
Croize said:
Ye ive seen yours, Thats why im waiting wery much so to try it, So dont worry, Already got a plan on it, Whenever i can :/ Consider the firmwire
Click to expand...
Click to collapse
try existenz alot of people love existenz
Envious_Data said:
try existenz alot of people love existenz
Click to expand...
Click to collapse
Just factory wipe, and flash it ? I have a backup of stock rom already incase somthing goes wrong =) Also , Should i drain battery to 0 when u flashed the rom ??
Croize said:
Just factory wipe, and flash it ? I have a backup of stock rom already incase somthing goes wrong =) Also , Should i drain battery to 0 when u flashed the rom ??
Click to expand...
Click to collapse
download the rom
reboot to recovery
flash it
wipe dalvik cache
wipe cache
enjoy
its a stock based rom so data wipe isnt needed
Envious_Data said:
download the rom
reboot to recovery
flash it
wipe dalvik cache
wipe cache
enjoy
its a stock based rom so data wipe isnt needed
Click to expand...
Click to collapse
Ok i finished, Went nice ^^ Now i just play with this until yours is ready for 314
Croize said:
Ok i finished, Went nice ^^ Now i just play with this until yours is ready for 314
Click to expand...
Click to collapse
its as simple as that when it comes to flashing
the only thing you should note of is non stock based roms, they require a bootloader unlock and if your coming from stock you need to wipe your data,
you dont need to wipe data if your going across roms with same base, aka CM11 to Cm11 , stock to stock , based to based
Best rom threads are not allowed on XDA
Please try them out yourself to see which is best for you.
Thread closed