Every other device in the house can find my bluetooth speaker (GoGroove BlueSync OR3) but for some reason it doesn't show up on the Note II's list of bluetooth devices. Why is this and how can I fix it?
Zecharixs said:
Every other device in the house can find my bluetooth speaker (GoGroove BlueSync OR3) but for some reason it doesn't show up on the Note II's list of bluetooth devices. Why is this and how can I fix it?
Click to expand...
Click to collapse
Sometimes when first setting up my headset (after new ROM flash) I have to push the sync/phone button on my headset, then my phone sees it.
Sent from my SCH-I605 using Tapatalk 2
Related
I just got my new car yesterday, a 2012 Hyundai Veloster, and my phone refuses to connect to the already paired system unless I actually choose to connect to it.
In my Toyota Matrix in which I installed a Clarion CZ500, I had no problems auto connecting.
Can anyone think of why this might be happening or know of a workaround? Unfortunately, Tasker doesn't have a feature to connect to a Bluetooth device.
Check out the pairing section.
http://www.hyundaiusa.com/bluetooth/bluefaq.aspx
I'm going to try to set it up through the voice interface, but it shouldn't make a difference.
It started working properly all of a sudden.
Sent from my GT-I9100 using xda premium
rickytenzer said:
I just got my new car yesterday, a 2012 Hyundai Veloster, and my phone refuses to connect to the already paired system unless I actually choose to connect to it.
In my Toyota Matrix in which I installed a Clarion CZ500, I had no problems auto connecting.
Can anyone think of why this might be happening or know of a workaround? Unfortunately, Tasker doesn't have a feature to connect to a Bluetooth device.
Click to expand...
Click to collapse
Having the same problem with my Atrix 4G running GB 2.3.4 and my car stereo (Pioneer MVH-8200BT).
Manual connection works fine. This used to work too, I just can't figure out what broke it (2.3 upgrade maybe). I've deleted the BT profiles from both the car stereo and the phone, didn't change anything. (and yes, the car stereo is set to Auto-Connect).
I find this extremely annoying :-/
Is BT on before the car starts? I found that that's the problem.
Sent from my GT-I9100 using xda premium
rickytenzer said:
Is BT on before the car starts? I found that that's the problem.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I'll try to reverse the order and turn the BT on after the radio is fully powered up
At the risk of highjacking an old thread:
How secure is bluetooth.
I'm looking at a bluetooth ignition system.
Function:
When a pairing is made, a relay is turned on.
When the pairing is lost, the relay is turned off.
The device gives no indication, physical or via bluetooth about the relay status.
The device is set to non-discoverable by hardware.
The password is a 20 character alpha-numeric code.
The device performs no function and stores no data, it simply operates from the pairing.
How secure would this be? or more accurately, how much time would likely be required to crack this device assuming no physical access?
Also looked into RFID, but that looks to be easy to crack unless I spend silly money on an active encryption system.
Hey gang.
I have two bluetooth devices in my car. One for Streaming audio and one for voice calls. Is there a way to have both devices active at the same time but have one device devoted to handsfree and one device devoted to streaming?
I can't find any settings in the Bluetooth Settings to enable/disable certain profiles.
Thanks,
Nevermind...answered my own question
Long Press on the device in the Bluetooth Settings and select which profile you want
hi.
what is your mobile model?
i can't find this item.
Payman62 said:
hi.
what is your mobile model?
i can't find this item.
Click to expand...
Click to collapse
Umm. Its a at&t galaxy note
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Hello. Does anyone know if the T959 can connect to two bluetooth devices at once, or is the bluetooth version too old? I tried connecting a speaker and a headset but only one would work at a time.
However what I really want to do is connect an external bluetooth GPS receiver and a bluetooth speaker at the same time. Will it work?
Sent from my SGH-T959 using xda app-developers app
The s5 on original rom 4.4.2 will not auto connect to my car Bluetooth (it is a blue star system ) there is no connection problems with my HTC m7.any ideas what I can do to get the s5 to auto connect?
klauspabst said:
The s5 on original rom 4.4.2 will not auto connect to my car Bluetooth (it is a blue star system ) there is no connection problems with my HTC m7.any ideas what I can do to get the s5 to auto connect?
Click to expand...
Click to collapse
When anything that is paired properly to my phone turns on, they auto connect. Go through the pairing steps with the car and your phone, then turn off the car and turn it back on again.
Sent from my SM-G900T using Tapatalk
Tried it and it did not work!
Anything else I can try?
I have a 2011 Mazda 3, and sometimes mine won't pair automatically, but 98% of the time it does
Sent from my Galaxy S5 using Tapatalk
Just got a Verizon GS and am noticing that my typical setup, Watch on left hand, BT headset in right ear I get constant disconnects with
my Bluetooth headset.
The connection will drop and the call audio will revert to the speaker on the watch.
I have tried disabling WiFi and GPS with no success.
Anyone else having this issue?
G
I don't have this issue but I did have a similar problem when I was using a Sony BT headset with my old Galaxy Gear.
I corrected this issue with an excellent app called "Bluetooth Auto Connect"
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect
It's useful for prioritising bluetooth devices. It might be helpful, then again the Gear S does have unusual connection bridging. It's worth a go.
apprentice said:
I don't have this issue but I did have a similar problem when I was using a Sony BT headset with my old Galaxy Gear.
I corrected this issue with an excellent app called "Bluetooth Auto Connect"
https://play.google.com/store/apps/details?id=org.myklos.btautoconnect
It's useful for prioritising bluetooth devices. It might be helpful, then again the Gear S does have unusual connection bridging. It's worth a go.
Click to expand...
Click to collapse
Hey I use to use that app on my original gear
---------- Post added at 06:04 PM ---------- Previous post was at 06:02 PM ----------
GuardianZX9 said:
Just got a Verizon GS and am noticing that my typical setup, Watch on left hand, BT headset in right ear I get constant disconnects with
my Bluetooth headset.
The connection will drop and the call audio will revert to the speaker on the watch.
I have tried disabling WiFi and GPS with no success.
Anyone else having this issue?
G
Click to expand...
Click to collapse
No but what version is your BT headset? 3.0 4.0 ect?
Uniquebarbee said:
Hey I use to use that app on my original gear
---------- Post added at 06:04 PM ---------- Previous post was at 06:02 PM ----------
No but what version is your BT headset? 3.0 4.0 ect?
Click to expand...
Click to collapse
Its a BT 4.0 headset, its the new Jawbone ERA, no issues with other devices.
Hi,
I`m using a Plantronics headset, which works fine with my Samsung S4 (and all other phones).
Now, I`ve tried to connect the headset to my Gear. The connection itself works fine and without any problem.
But, and that`s angrily, I can use the headset only when the Gear is not connected via BT to my mobile (S4).
Inside the Tel-App, the headset symbole is not shown (greyed out), but inside the BT Headset configuration profile shown as "paired".
If I disconnect my BT connection between the mobile and the Gear, the headset works at once with the gear.
Many configurations checked, I`ve no more ideas.
Any hint?
Thanks in advance, tregobad
Update:
I`ve checked again how it works.
My Headset (Plantronics 725) is connected with the mobile AND Gear S.
Mobile and Gear are connected via BT.
If I get a call, both devices ringing (Multi Sim). Doesn`t matter if I accept the call at the mobile OR Gear, i can use the Headset.
But , if I accept the call at the Gear and use the Headset, the mobile is used and connected with the Headset.
That means:
mobile and Gear BT connected = Headset connects to mobile
disconnected = Headset connect to the device you be beside, mobile OR Gear
tregobad
tregobad said:
Hi,
I`m using a Plantronics headset, which works fine with my Samsung S4 (and all other phones).
Now, I`ve tried to connect the headset to my Gear. The connection itself works fine and without any problem.
But, and that`s angrily, I can use the headset only when the Gear is not connected via BT to my mobile (S4).
Inside the Tel-App, the headset symbole is not shown (greyed out), but inside the BT Headset configuration profile shown as "paired".
If I disconnect my BT connection between the mobile and the Gear, the headset works at once with the gear.
Many configurations checked, I`ve no more ideas.
Any hint?
Thanks in advance, tregobad
Click to expand...
Click to collapse
I'm experiencing an issue that may be related. I have my Gear S connected with my Note 4 and when I turn on a BT headset that's only paired to my Note 4, the Gear S disconnects. I then manually go and reconnect my Gear S to my Note 4.
Is there a way to keep the Gear S connected to my Note 4 when I turn on my BT headset? Or will the Gear S always disconnect from my Note 4 when a different audio device connects to the Note 4?