hi all. i was trying to unlock bootloader with rom toolkit, and something went wrong.
tried hard reset with power, volume and home keys, nothing.
tried to go into software upgrade to reflash kdz, nothing.
when i plug in phone, computer just beeps like it's mounting and unmounting really quickly.
lg mobile updater says phone not hooked up. it just goes "duh duh duh duh, then the sound windows makes when you unplug usb device.
i thought this was unbrickable. hehe, leave it to me.
any help would be greatly appreciated.
I had the same problem,but this guide helped me a lot!
Download LG Mobile Support Tool and do the following steps:
..1. Remove the battery and the USB cable from phone.
..2. Without the battery, plug the USB cable and connect the PC to the phone with USB cable.
..3. Press and hold (VolumeUp) key and press (Power) key for 2/3 secs. You should see "S/W Upgrade" on the screen after a few seconds.
..4. Re-insert the battery in the phone.
..5. Start LG Mobile Support Tool(B2CAppSetup.exe), let it find the phone (and load drivers) and start the software update.
IMP: This method is online Software upgrade mode and faster internet will be required which will download around 500+mb file while recovering. So be prepared pals.
Sent from my LG-P760 using xda premium
MahdiNl said:
I had the same problem,but this guide helped me a lot!
Download LG Mobile Support Tool and do the following steps:
..1. Remove the battery and the USB cable from phone.
..2. Without the battery, plug the USB cable and connect the PC to the phone with USB cable.
..3. Press and hold (VolumeUp) key and press (Power) key for 2/3 secs. You should see "S/W Upgrade" on the screen after a few seconds.
..4. Re-insert the battery in the phone.
..5. Start LG Mobile Support Tool(B2CAppSetup.exe), let it find the phone (and load drivers) and start the software update.
IMP: This method is online Software upgrade mode and faster internet will be required which will download around 500+mb file while recovering. So be prepared pals.
Sent from my LG-P760 using xda premium
Click to expand...
Click to collapse
won't go into software mode. just makes the connect/disconnect sound over and over.
was trying to get fastboot running, but now have mirror image
Do you have installed the right drivers?
Sent from my LG-P760 using xda premium
redheadplantguy said:
won't go into software mode. just makes the connect/disconnect sound over and over.
was trying to get fastboot running, but now have mirror image
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
steps 1 and 2, don't worry about mirrored image in fastboot
Lelus said:
http://forum.xda-developers.com/showpost.php?p=40121966&postcount=7
steps 1 and 2, don't worry about mirrored image in fastboot
Click to expand...
Click to collapse
i can't get into S/W upgrade mode. will this still work?
don't wanna just start hammering away on commands without having full picture.
when i plug in cable and hit volume button, it just connects/disconnects very quickly, giving the usb connection sound windows does.
da DEEP
DO doop
over and over
redheadplantguy said:
i can't get into S/W upgrade mode. will this still work?
don't wanna just start hammering away on commands without having full picture.
when i plug in cable and hit volume button, it just connects/disconnects very quickly, giving the usb connection sound windows does.
da DEEP
DO doop
over and over
Click to expand...
Click to collapse
you need to do step 1 and you'll be able to get into s/w upgrade mode
Lelus said:
you need to do step 1 and you'll be able to get into s/w upgrade mode
Click to expand...
Click to collapse
says waiting for device, but it won't connect
just makes that disconnect reconnect sound over and over. tried to install the fastboot stuff again, but the part where it says install drivers included, windows says unable to.
tried to uninstall all lg drivers like another thread said, laptop refuses to.
poop
redheadplantguy said:
won't go into software mode. just makes the connect/disconnect sound over and over.
was trying to get fastboot running, but now have mirror image
Click to expand...
Click to collapse
I believe this is actually a Windows issue. Disconnect the phone. Right click computer, manage, device manager. Scroll down and start deleting "usb root hub(s)" at the bottom. Don't fret when the mouse control goes away. Once they are gone, reboot, and let them reinstall..
Then try again.
LG-P769 - Needs MIUI
this can be closed
thanks to everyone who tried to help, but i just took it back to T-mo, told them it died in the middle of a call and never came back on. replaced under warranty for only $20 expedited shipping.
laptop also acting wonky, so doing factory reset before I hook up new one.
redheadplantguy said:
hi all. i was trying to unlock bootloader with rom toolkit, and something went wrong.
tz greatly appreciated.
Click to expand...
Click to collapse
Can you give us link to this toolkit thread?
I used this guide http://forum.xda-developers.com/showthread.php?t=2221102
and it went with no problems.
Waiting for device means that you doesn't have installed fastboot drivers installed correctly.
If you want to unlock it successfully then follow guide step by step. Make sure to wait 30min if you won't you may lock it permanently.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
maxver0 said:
Can you give us link to this toolkit thread?
I used this guide http://forum.xda-developers.com/showthread.php?t=2221102
and it went with no problems.
Waiting for device means that you doesn't have installed fastboot drivers installed correctly.
If you want to unlock it successfully then follow guide step by step. Make sure to wait 30min if you won't you may lock it permanently.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Click to expand...
Click to collapse
this was the link
http://design-extreme.net/unlock-bootloader-for-lg-optimus-l9-at-official-jelly-bean-firmware/
i got my replacement, but i'm having problems rooting this one.
first time, was tedious and many steps, but this time something not working.
do you happen to have the link for problems thread handy? the b2capp setup isn't working. when trying to flash kdz, tells me not installed.
Related
Hi, because with last update increased count of people with bricket phone, I just tryed search for way how to repair this phone. It seems, that last possible way how to save your phone is emergency mode.
I would like to notify you, that I didn't tested it (I'm had not luck enough to brick my phone yet ). I just searched and tried write this for help to others.
So, let's go on.
1) If it's not possible connect to phone via ADB (in Adroid SDK/tools run "adb shell") at all you will try next steps. If it will work, you can use another, verified tools like custom recovery or KDZ_FW_UPD (search on forum for more) [HOWTO] Flash original firmware on P500, )
2) If you fail in previous step, you can try enter into emergency mode manually and try to flash ROM with KDZ_FW_UPD:
Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they were not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Make sure that all update was done successfully. Phone should restart itself automatically
Disconnect the USB cable from the phone
Press the three button combo for HW reset of device i.e volume up + home + power button
List to do based on Zecanilis's [HOWTO] Flash original firmware on P500
3) Still no success? Wait for more "What I can do" or just go to LG and let repair on them.
Source:
http://forum.gsmhosting.com/vbb/f282/vygis-shell-v1-1-0-josedavido-1166478/ (included file named "Flash help.txt" in application)
http://android.modaco.com/content/l...modaco-com/321895/faq-gt540-reference-thread/
Please let me know if it works. I just searched for way and I haven't possibility to test this steps for now. I will do update if it will be necessary, same as I will try describe more about software which I founded.
Some experiences from thread(s):
AVanover5: ...It works if you set the mode to CDMA and DIAG. Just to let people know. Not sure if it'd work without the recovery screen or not. I never tried it ironically, haha. Thank you guys.
geejay2: ...Bricking seems to be easily achieved by forgetting to disable the LG Modem driver. Apparently the modem driver interferes during flashing. Also I noted that kdz is not stable under Win2k, I switched to WinXP to flash successfully. I saw several aborted flashing attempts in WinXP with modem driver enabled.
domenic_s:KDZ_FW_UPD doesn't work (Application cannot start) -.- Using Windows 7 64bit version. //edit: allright tried another pc (win xp 32bit) and yeah - it worked... I'm so happy.
Click to expand...
Click to collapse
About shaking (sorry, but I still can't believe... )
salte_eskil:wow! shaking the phone really worked! seems kind of stupid but thanks to you all at the xda forum for tips and tricks
4wd vege: Now unbricked. Strangely kdz updater only saw my phone after shaking!!!
me2kimi:It sound crazy to shake the phone while at emergency mode. I's crazy but it magic. ...So what I do is connect to usb, Launch software update at kdz while shaking the phone. Then after that kdz is working like normal.
Click to expand...
Click to collapse
I tried with all possible combination.. with and without battery.. vol- home, vol + return, power vol+ home.. end more.. but phone don't turn on...
In meantimes the phone is in the service LG.. hope...
Exscuse me for my English
Did you had phone off before trying this? And also battery should be charged. I just added this things...
If event that it not show you emergency mode, LG service and warranty is probably the only way how to proceed. Sorry. But I will be searching if another way will exist...
Good work .. I hope that you will find a way to solve ... especially for other users .. good luck
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Moved to development and stickied it for a while!
Thank you!
Cheers
socialdistortion said:
Good work @The_ERROR.
It should work. I think you should also add that the phone mode should be set to Emergency (and not DIAG as mentioned) in the kdz updater.
Click to expand...
Click to collapse
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Recovery Phone?!
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
zeule said:
Hello,
Had anyone tried "Recovery Phone" from the LGMobile Update app? It's under the "Customer Support" menu. Enter IMEI or S/N and see if it can bring it up to life.
Cheers.
Click to expand...
Click to collapse
I can add that as next possible way Let me expect it.
batman89i said:
Yes.. I tried.. but nothing.. the LG MOBILE UPDATE crashed because don't wiew the phone in Usb...
Click to expand...
Click to collapse
So... it sad everything
The_ERROR said:
Good to know - do you know differences between CS_EMERGENCY and EMERGENCY?
Click to expand...
Click to collapse
Not really. Gathered some info though. We use emergency mode when the phone boots into only emergency mode else we try CS emergency as last option.
In any case this method will work only if the kdz updater recognises the phone.
Further reading http://android.modaco.com/content/lg-gt540-optimus-gt540-modaco-com/321895/faq-gt540-reference-thread/
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
pariksheetsharma said:
I was able to do the KDZ, actually thats the only way possible. Please add this to the list:
1. Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments.
2. Install the LG drivers by selecting the update manager from the lg site.
3. Disable the modem driver.
4. Once done, reboot the handset and when it has come to emergency mode connect it via USB.
5. Its going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
6. shake the handset - IT DID WORKED FOR ME.
My suggestion don't give up. It took me around 14 hours to bring the handset back to original firmware and here I am today trying to boot the rom once again.
7. UPDATE AND ENJOY.
Click to expand...
Click to collapse
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
The_ERROR said:
Thanks, I will do!! Only about 4 and five.
First reboot the handset and when it has come to emergency mode connect it via USB
and then
It's going to detect it as usb drive. Launch KDZ. No need to go into Emergency mode.
So, whats about if phone didn't go into emrgency itself (for example stuck on Android logo)?
Click to expand...
Click to collapse
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
pariksheetsharma said:
I am talking about phone getting into Emergency mode, KDZ doesn't need to switch to CS_EMERGENCY or EMERGENCY Switch off the phone first, then you are either connect it to USB cable or you can remove it from the USB cable. Key combination to bring the phone only in emergency mode are:
1. Connected to USB cable, only thing visible is the LG logo, this is because its getting charged. Press VOL UP + BACK BUTTON
2. Not connected to USB cable and is not charging and so switched off: Press VOL UP + BACK BUTTON + POWER BUTTON
In both the cases phone will switch to a yellow screen showing: "Emergency mode!!" and will remain like that.
It's only in Emergency mode that the handset will be detected like a USB drive and can be KDZed.
Click to expand...
Click to collapse
OK, I edited it. But I kept possibilities of EMERGENCY and CS_EMERGENCY modes if standard way failed. About switch into emergency, I think that it does not matter which way for emergency is used.
socialdistortion said:
I seriously doubt the "Shake your phone part". It just sounds so ...
Peace
Click to expand...
Click to collapse
Yes, I know... but if it will help, it doesn't matter how stupid it sounds....
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
cjbi said:
Stuck in LG logo, unable to boot into emergency mode.
What can I do? Go to LG?
Click to expand...
Click to collapse
Have you tried all the mentioned methods? Press the combination buttons a little longer (Maybe that can help).
BTW what did you do that bricked your phone?
Hey guys.
I was installing a rom on my phone (which I have done many times before). It was the CM 10.1 rom this time around. I got it installed per instructions and then I got the boot loop. I Figured, no biggy, been through this before. So I pulled the battery and went to boot back into the boot loader (vol - and pwr) and I get nothing. The phone wont turn on at all. It does nothing when I put in the charger as well (no led, etc). Did I some how get bricked?
Any help would be appreciated. Thanks!
Strange.
when you connect your device to the charger is there atleast a red dim light? you will have to look closely.
You might also wanna try a different charger or connect your phone to your computer and see if it recognizes it.
Astrikz said:
Strange.
when you connect your device to the charger is there atleast a red dim light? you will have to look closely.
You might also wanna try a different charger or connect your phone to your computer and see if it recognizes it.
Click to expand...
Click to collapse
No dim light. The computer dings when I plug it in, but adb can't do anything with it.
Connect your device to your computer again and on your computer go to (guessing your on windows) Start- Computer. If you see this "QHSUSB_DLOAD" under devices with with removable storage then your phone is bricked. Theres still hope.. You can try unbricking your device from the two options listen bellow.
Dexter's HTC Unbricking Project.
Closeone's HBOOT Downgrade Toolkit Live
Closeone's guide you can skip the bricking steps because well your device is already bricked..
Astrikz said:
Connect your device to your computer again and on your computer go to (guessing your on windows) Start- Computer. If you see this "QHSUSB_DLOAD" under devices with with removable storage then your phone is bricked. Theres still hope.. You can try unbricking your device from the two options listen bellow.
Dexter's HTC Unbricking Project.
Closeone's HBOOT Downgrade Toolkit Live
Closeone's guide you can skip the bricking steps because well your device is already bricked..
Click to expand...
Click to collapse
Thanks for the Help Astrikz. I tried the 2nd method with the CD and it just sits there with "Waiting for device". I do have QHSUSB_DLOAD in windows, so it is bricked. But it must be REALLY bricked. Bummer.
radink said:
Thanks for the Help Astrikz. I tried the 2nd method with the CD and it just sits there with "Waiting for device". I do have QHSUSB_DLOAD in windows, so it is bricked. But it must be REALLY bricked. Bummer.
Click to expand...
Click to collapse
Waiting for device? What step does it show this?
You should be able to skip to step 17 and start from there.
Astrikz said:
Waiting for device? What step does it show this?
You should be able to skip to step 17 and start from there.
Click to expand...
Click to collapse
Step 21.
radink said:
Step 21.
Click to expand...
Click to collapse
& you pressed the volume down button while connecting your device? If so then I'm out of ideas to be able to boot up your phone. If you have insurance on the phone i recommend taking it to a sprint store .
Astrikz said:
& you pressed the volume down button while connecting your device? If so then I'm out of ideas to be able to boot up your phone. If you have insurance on the phone i recommend taking it to a sprint store .
Click to expand...
Click to collapse
Yeah tried it. New phone is on the way. Glad I have the insurance.
Hi, people
I have a Neo V MT11i 4.1.B.0.587, it's rooted and BL Unlocked, i'm trying to flash a <kernel>.img file, but everytime i try to go into fastboot mode (pressing home button, pressing volume + button, entering through flashtool into fastboot...) the blue led appears for just a few seconds and then starts to charge the battery.
Can anyone help me?
Download and install flashtool, or download kernel flasher. I'm using flashtool which is really easy to use.
Switch the phone off.
In kernel flasher, follow the screen instructions.
In flashtool click the ray icon and select fastboot.
With the phone switched off, press menu button and connect it to the computer with the USB cable
On flashtool, you can check the status on the window.
Regards
milanjm said:
Download and install flashtool, or download kernel flasher. I'm using flashtool which is really easy to use.
Switch the phone off.
In kernel flasher, follow the screen instructions.
In flashtool click the ray icon and select fastboot.
With the phone switched off, press menu button and connect it to the computer with the USB cable
On flashtool, you can check the status on the window.
Regards
Click to expand...
Click to collapse
That's the point, i've already tried that, and every time (was 'bout 15 times) the blue led turned on for few seconds and then it turned off, and started charging the phone, it never stayed in fastboot mode enough time to have the kernel flashed
Any other ideas?
Onegai :crying:
Alexei.Robles said:
That's the point, i've already tried that, and every time (was 'bout 15 times) the blue led turned on for few seconds and then it turned off, and started charging the phone, it never stayed in fastboot mode enough time to have the kernel flashed
Any other ideas?
Onegai :crying:
Click to expand...
Click to collapse
Are you sure your bootloader is unlocked?
milanjm said:
Are you sure your bootloader is unlocked?
Click to expand...
Click to collapse
I couldn't do it through the official way
So i had to do it with the testpoint, negative battery cable thing xD
But yes, according to that post and S1tool, it is unlocked
Alexei.Robles said:
I couldn't do it through the official way
So i had to do it with the testpoint, negative battery cable thing xD
But yes, according to that post and S1tool, it is unlocked
Click to expand...
Click to collapse
Can you access your phone through adb from your computer?
The only thing I can think of is a problem with the drivers. Which OS do you have?
There some issues with Windows 8.1. I don't have it, so I cannot tell, but look for it on xda. I see references to it
milanjm said:
Can you access your phone through adb from your computer?
The only thing I can think of is a problem with the drivers. Which OS do you have?
There some issues with Windows 8.1. I don't have it, so I cannot tell, but look for it on xda. I see references to it
Click to expand...
Click to collapse
With adb i have no problem.
Win 7 ultimate 32 bit
Post the screenshots of flash tool. Maybe we can see something on them
Sent from my Dark neo V
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
dreamnewbie said:
Do You connect phone in software update mode (w/o battery press vol-up and connect usb, than connect battery)?
Click to expand...
Click to collapse
Yes I tried this. It doesn't work. Stops at 15%. Says the phone isn't connected even though it is.
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
dreamnewbie said:
If the phone can run update mode than it's not bricked (correct me please if i am wrong). I had some issues lately with recovering firmware on windows 8.1 and finally i did this on w7. Maybe try other pc?
Wysłane z mojego LG-P760 przy użyciu Tapatalka
Click to expand...
Click to collapse
It can get into S/W upgrade mode perfectly fine. I am doing this on a Windows 7 but I will try my windows 8 ASAP
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
dreamnewbie said:
install drivers, connect LG in SW mode - 3 devices should be installed, than go with update with lgmobile support tool.
Click to expand...
Click to collapse
I just got through trying it multiple times with the same phone not connected error.
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
noob.gamer said:
Flash ics xloader and uboot. You should be good to go then. I did the same thing.
Click to expand...
Click to collapse
With this tool? http://forum.xda-developers.com/showthread.php?t=2601480
I tried and it continues to say device not found. Do I go into S/W upgrade mode?
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Hackjab said:
So I am trying to follow http://forum.xda-developers.com/showthread.php?t=2085344 this tutorial to unbrick, but I believe my debugging mode is off and since I can't boot into the phone, the KDZ flash gets stuck at 15%. Any ideas on what to do?
Click to expand...
Click to collapse
Im actually in the same boat right now. Mind telling me what you did or if you solved it yet cause im really stuck please help?
noob.gamer said:
No not that tool. Use lelus script for flashing those files in fastboot and then go into s/w upgrade.
Sent from my Amazon OtterX using Tapatalk
Click to expand...
Click to collapse
Hey,I was having this exact same problem and I did what you said and got the fastboot drivers.Now when I try to flash a rom it passes 15%,but disconnects somewhere around along the way(after the analysis that is).I've noticed that when this happens my phones sceen goes from S/W mode to a blank screen(or maybe it's turned off). In any case,I disconnect my phone when this happens and do the steps to put it back into S/W mode and click Restart and it just keeps giving me that same error.When I start anew after putting the phone back into S/W mode it does the same exact thing at perhaps a different percentage and/or a different stage.Any ideas?Also,one time the screen on my phone stayed on throughout the entire process up until 96% of the final stage and it turned off,but it still continued to 100% and gave me the completion screen.Any thoughts about what I can do?So far I'm just doing this again and again,seeing if maybe one time it won't disconnect on me.
Edit: I just did what this link http://forum.xda-developers.com/showthread.php?t=2119090 told me to do.Was I supposed to do something else?
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.