Hi,
I bought a branded at&t htc titan and I'm trying to install HSPL on it.
Unfortunately without any luck...
After doing the goldcard method, the installation of the europian rom (IMG_Eternity_HTC_Europe_1.09.401.02_Radio_16.23.02 .09_A_16.24.00.23_Signed_ETERNITY_RELEASE.nbh)
and finally the installation of the 2.05 SPL via goldcard,
In SPL it reads:
PI39100 MFG
SPL-2.5.160015.3(137079)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1,V11,B:F8)
Radio-16.23.02.09_A
Everytime I startup the device, I have to input the unlock code that the seller provided me so that i can use sim cards other than at&t's...
From what I've seen, all at&t titans have to re-input the unlock code after restarting - even with a custom rom - ,
so we don't have to bother about this issue.
Also if I'm not mistaken, PI39100 MFG with SPL-2.5.160015 is what I should have before HSPL.
So, everything is ok till this point...
But, when I try to install HSPL, it connects, installs, says that HSPL installed successfully, device reboots, but still has PI39100 MFG with SPL-2.5.160015!
EDIT: From hat I've seen I'm stuck with a half-bricked titan, with official EU rom and spl 2.05 MFG.
Can't downgrade, either HSPL...
i managed to downgrade to official att rom, but the spl didn't downgrade...
I installed the rom 3 times with no luck with the spl...
Afterwards i renamed the eu rom from ETERNIMG to ETERDIAG and it installed.
but still the spl is PI39100 MFG SPL-2.5.160015.3(137079)...
I tried to install spl2.05 again, then spl2.6 with no luck, then hspl without results...
Finally I upgraded to 7.8 via cab installer and thats the best I managed to accomplish...
Anyone who can help with this bug and have succesfully HSPL att titan?
cotulla needs a titan stuck in 2.05 to fix it
elmanortega said:
cotulla needs a titan stuck in 2.05 to fix it
Click to expand...
Click to collapse
Sorry, I'd have no problem giving it to cotulla, but my Titan is all I have at the moment... (my HD2 died so I gave it to a friend, and I sold my Trophy...). i hope that someone can help...
Related
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
caztronics said:
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
Click to expand...
Click to collapse
I've never downgraded IPL or SPL but other than that I've gone back to original config with my UK Vodafone branded Hermes.
There is a section in Mrvanx's guide on SPL downgrading here http://forum.xda-developers.com/showthread.php?t=299462 but you may need to search a bit further for the IPL downgrade.
Good Luck.
so at this point my goal is to follow mrvanx guide and downgrade the ipl and spl and then i was planning to reinstall the officially released wm6 upgrade in the hopes that it would put its own version of its ipl/spl on the phone. the problem im encountering is when i run the downgrader the phone asks me will i allow bl.exe to run and i click yes
it goes into the red/green/blue/white screen and says its
herm100
ipl-sspl by des
herm100
spl-1.09.ds
wtf is that? it wont let me go past this point, ie i get an error when it tries to verify information from the phone. i can restart the phone and it goes back to windows and olipro2.10 --- im not sure what direction to go? should i try to put an original wm5 rom on the phone then try to downgrade again or what?
hard spl is the way to go i think
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
i have hard spl 2.10.... im trying to get rid of it and return the phone to factory like conditions, well not really factory cus im going for the official wm6 but essentially i cant send my phone in for the warranty with olipro on it so im trying to ditch it, but the posted methods arent working for me
Searching returned almost 30 different threads. Have you looked here
http://forum.xda-developers.com/showthread.php?t=314107
Are you following the MrVanx guide carefully? I have never had an issue following the steps carefully. The info you are getting is because it is using the force SSPL option, which it should. I would suggest you try again, following the directions very carefully. Good luck. It really should work.
when it gets to the screen where i see spl-1.09.ds the ruuwrapper provided from mrvanxs guide says "Verifying the information on your Hermes... Please wait..."
this is where i get an error 260 and its asking that i check the usb cable and what not which i know isnt the issue. im gonna try this on the other comp in my house which is xp. i have been trying this on a vista machine
so it worked on my windows xp rig. once i downgraded the spl, i reinstalled the official wm6 and it upgraded the ipl to 1.04 and the spl to 2.03 which im happy with and have already placed my order for the warranty exchange.
thanks for the help to those who helpful
Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...
hii,
I bought a HTC HD2 from a friend with a broken LCD.
He walked with his HD2 in his pocket against a table and it cracked.
If you push a little on the screen you still can see allmost everything.
so here is the problem:
I try to boot it but I've got a black screen with a white triangle...
I did some research on google en tried a soft reset bij holding de up and down volume en start up the phone, it was succesfull. But the problem didn't solved.
Than I did the thing with only the volume down button and this is what i get.
a screen with 4 collors.
HX-BC
SPL - 1.42.0000 XE
MicroP (LED) 0x05
MicroP (TOUCH) 0x30
Upgrade rom code error please try again...
someone knows what to do ?
I really need some help.
Many Thanks..
What is your phone type?
HD2 with 512rom or TMobile ?
If you flash with official rom. Below are the serial numbers you may need to download the rom from official website.[I quoted from mskip]
World Wide English (WWE) - Serial: HT9AZNW00968
South East Asia (Asian WWE) - Serial:HT01XNW03437
Denmark: (DAN) - Serial: HT9B6NW00167
Norway: (NOR) - Serial: HT9C7NW01234
France: (FRA) - Serial: HT9BLNW00122
Spain: (SPA) - Serial: HT9BDNW00592
Italy: (ITA) - Serial: HT9BCNW00722
Greek: (ELL) - Serial: HT9BMNW00059
Germany: (GER) - Serial: HT9B9NW00374
Netherlands: (NLD) - Serial: HT9AVNW01232
Russian: (RUS) - Serial: HT9BCNW00012
Turkey: (TUR) - Serial: HT9CMNW05766
East Europe: (WWE_EastEurope) - Serial: HT9B3NW02204
*If you want to flash with custom rom.
Read below thread.
http://forum.xda-developers.com/showthread.php?t=609477
Go to HTC's website and download an updated ROM. You will only be allowed, with your phone's serial number, to download a ROM that is suitable for your phone.
It can't be a tmous with working spl 1.42.
It's been SD card flashed with an incorrect stock Rom whilst hspl was installed so updated the spl , removed hspl and then the flash failed.
Either find and flash the correct stock, or go straight to hspl2 and flash what you like. Usb flashing from bootloader will be fine in either case.
Well try to get the stock rom flashed...
Sent from my HTC HD2 using XDA App
Download the Stock ROM from HTC's website for the country the phone was purchased from. It should work flashing via SD Card method.
No way to flash stock rom
Hi,
I have an HTC HD2 bought in austria in sept 2010. since march 2011 i flashed to HSPL 2.08, Radiorom 2.15.50.14, MAGLDR113 and a Android NAND.
2 weeks ago i tried to upgrade to new NAND Version and my HD2 brocked. I´ve tried zu flash with stockrom by usb AND sd, but nothing worked. Tryed to flash by usb with org. HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe and get an Error 290 at 8%. After that i´ve tryed leoimg.nbh in root of SD by renaming RUU_signed.nbh form that rom.
Starting in Bootloader I read "Upgrade ROM code error Please try again" but it does not load the image from SD.
Any ideas?
thx in advanced
try using hspl 2 , 3 and 4 to remove the spl 2.08.hspl first, my first try would be hspl2 - choose 1.66.0000, and then flash the stock rom from sd card, and my second attempt if that didnt work would be hspl4 - choose 3.03.0000
hi again,
i tryed to flash with all versions of hpsl 2,3 and 4, but nothing works.
last try was hspl 2, 1.42.0000 an flashing by usb.
it was working to 100%, reboot and i get a whitescreen with htc logo.
thats all.
after 1 hour reboot, but nothig, only whitescreen with logo.
flash by sd don´t work anyway.
In that case, and especially since the failure happened at 8%, I'd say you have the stuck radio issue, (which seems to be happening a lot more than usual lately...)
Symptoms are usually spl seemingly flashing but hasn't changed when you check in bootloader, plus flashing failing at around 8 or 9%.
You may be able to flash cooked roms which don't include radio or spl, and you may be able to flash android, but may well get fatal hit errors,, it's not always the same. I suspect bad memory blocks or corrupted radio (or both, perhaps they are the same thing)
Hello,
As told in the title I can't get the 576MB to work.
I have the 2.15.50.14 Radio and HSPL (3.03.HSPL) with the latest HD2O Rom installed.
I also can't get my Leicke 3600mAh extended battery to work, but several revievs say it works after an update of the latest stock rom.
What I've tried:
- Task29 + Radio flashed again in bootloader mode + HD2O installed in bootloader mode
- installing 2.02.HSPL and the same procedure as above.
LEODIAG.nbh also said that the full 576MB RAM are ok, but why can't I unlock them with the new Radio + "576MB Ram"-ROM ?
Am I flashing it wrong or have I forgot something?
Thank you for helping me
hspl 3.03 won't get you 576, you'll only get 448, flash the 2.08 and you'll get 576mb. Good luck.
i agree, flash with 20.8 and i will be ok.
Thanks, problem solved
I had the wrong radio last time on 2.08 ...
Anyone has ever understood why HTC chose to use only 448MB of the total ram? With the last SPL HTC had to use all the ram like the american version.
adone.h said:
With the last SPL HTC had to use all the ram like the american version.
Click to expand...
Click to collapse
No they didn't, the 3.14 roms for the regular hd2, which come with radio 2.15.50 and spl 3.03.0000 don't unlock the extra ram, and neither do custom roms that use spl 3.03. (Artemis rom, for example)
Hi there Sam,
You seem very knowledgeable regarding flashing the HD2 so I wonder if you might help me if you can?
I recently bought a second HD2 from an ebay seller. It was described as having a white screen.
On receiving the phone I powered it up it booted to the white screen, no hTC logo. I rebooted to the bootloader and was able to connect via usb. The screen showed spl 2.08.???/ and cotulla from memory. I contacted HTC, UK support and gave them the IMEI no. from which they told me that the phone was unlocked and running the 3.14 WWE software. I therefore assumed that a failed attempt had been made to flash the phone with some other software so I downloaded the RUU 3.14 and attempted a reload via USB. After around 60% the upload failed giving a 270 error and the phone rebooted to the white screen but this time with the HTC logo. Bootloader now shows spl 3.03.0000.
I have tried different roms, Task 29, radio only roms, HSPL 4 all but to no avail usually only part loading before errors halt the process. HSPL 4 tries to load the progress bar reaches say 90% then rolls back doing this a few times before giving an error and quitting. I akso n=made 2 different gold cards thanks to your image creator but again to no avail. I prepared them using my working HD2.
I then began to think about bad blocks and came across the LEOdiag.nbh rom. I ran this from the sd card, it started up but halts at Jump to Diagnostics.
I now feel I'm at a dead end would welcome any other ideas of clearing the rom and/or repairing any bad blocks, unless the rom is busted in which case it would mean a replacement main board.
Geoff.
See your pm, but prepare for bad news
Have you tried unlocking the bootloader via whitecard emulator such as XTC clip?
On some HTC Devices you could only access everything in the Diag App when a whitecard emulator is attached
Maybe I could help you, I no longer have my HTC HD2 but I gained a lot of experience thanks to the XDA Dev community