Hi all.
I think i have killed my Galaxy S3 i9300!!!
I rooted it and installed the Paranoid Android rom, but then decided to go back to stock rom as I couldn't access the play store.
Now here's the problem... I wiped dalvic cache and did a factory reset, but stupidly wiped the system at the same time.
There is no operating system on the phone at all now and my pc greys out the device when I plug it in.
Odin did recognize the phone, but I couldn't flash a rom to it as it kept getting stuck at 'nand write start' in all versions of odin.
When I try to start in recovery mode (volume up, power and home) I get the green android instead.
I read that it's game over if you can't enter recovery mode.
Have I killed my s3? :crying:
Possible you have damaged the NAND .
wiped the system at the same time>> then you just flash a stock rom via ODIN .
What phone have you what stock did you flash .
You have already posted this why start yet another thread ??
jje
JJEgan said:
Possible you have damaged the NAND .
wiped the system at the same time>> then you just flash a stock rom via ODIN .
What phone have you what stock did you flash .
You have already posted this why start yet another thread ??
jje
Click to expand...
Click to collapse
Sorry for the double post, I thought that the first one may have been in the wrong place, it won't happen again.
I never got to flash any stock roms at all because i'm new to all this and I assumed that doing a factory reset was going
to put me back on the stock rom automatically.
That's when I made the mistake of doing the advanced wipe and ticking the system box.
Excuse my ignorance... but is it possible to fix this even if I don't have recovery mode?
Thank you for your help.
tel2405 said:
Sorry for the double post, I thought that the first one may have been in the wrong place, it won't happen again.
I never got to flash any stock roms at all because i'm new to all this and I assumed that doing a factory reset was going
to put me back on the stock rom automatically.
That's when I made the mistake of doing the advanced wipe and ticking the system box.
Excuse my ignorance... but is it possible to fix this even if I don't have recovery mode?
Thank you for your help.
Click to expand...
Click to collapse
Flash stock rom via Odin in download mode .
#
doing a factory reset was going
to put me back on the stock rom automatically. NEVER ever it just restores the last firmware flashed .
i'm new to all this and I assumed that's why we have multiple faqs guides and instructions .
jje
JJEgan said:
Flash stock rom via Odin in download mode .
#
doing a factory reset was going
to put me back on the stock rom automatically. NEVER ever it just restores the last firmware flashed .
i'm new to all this and I assumed that's why we have multiple faqs guides and instructions .
jje
Click to expand...
Click to collapse
Can you point me in the right direction for the correct stock rom please?
I'm fully aware of the faqs and guides, but I just wish I had read them BEFORE trying to do this!
What shall I do if I cannot get past 'Nand write start' in Odin?
tel2405 said:
Can you point me in the right direction for the correct stock rom please?
I'm fully aware of the faqs and guides, but I just wish I had read them BEFORE trying to do this!
What shall I do if I cannot get past 'Nand write start' in Odin?
Click to expand...
Click to collapse
Service centre .
jje
You could try Keis first, if you don't have it install it, start Kies up and then go to Tools > Firmware Upgrade and Installation and follow the on screen instructions
ag4751 said:
You could try Keis first, if you don't have it install it, start Kies up and then go to Tools > Firmware Upgrade and Installation and follow the on screen instructions
Click to expand...
Click to collapse
I'll give that a go this evening when I get home. Thanks so much for the helpful answer :fingers-crossed:
if you still have a recovery download a rom and flash it
Thealshear said:
if you still have a recovery download a rom and flash it
Click to expand...
Click to collapse
Unfortunately I don't have recovery mode anymore, volume down takes me to Odin mode and volume up just shows me the green android!
you still got download mode good, just goto samfirmware and download a firmware from there
will he have lost his EFS having formatted his system?
Thealshear said:
you still got download mode good, just goto samfirmware and download a firmware from there
Click to expand...
Click to collapse
Thanks for the info, i'll try both of these options this evening and get back to you
k6? said:
will he have lost his EFS having formatted his system?
Click to expand...
Click to collapse
What does this mean if I have... and what is an EFS??
please excuse my ignorance, i'm still learning about android.
k6? said:
will he have lost his EFS having formatted his system?
Click to expand...
Click to collapse
I've read up on it and I see the importance of the EFS now
Am I right to think that if I have lost it, then the phone is pretty much useless?
tel2405 said:
I've read up on it and I see the importance of the EFS now
Am I right to think that if I have lost it, then the phone is pretty much useless?
Click to expand...
Click to collapse
unfortunately yes. If you have proof of pruchase etc a samsung service centre can help you.
k6? said:
unfortunately yes. If you have proof of pruchase etc a samsung service centre can help you.
Click to expand...
Click to collapse
I tried flashing official rom, but Odin got stuck at 'Nand write start' and Kies wouldn't recognize the phone.
Thanks for your help, but I think it'll have to be the service centre now!
tel2405 said:
I tried flashing official rom, but Odin got stuck at 'Nand write start' and Kies wouldn't recognize the phone.
Thanks for your help, but I think it'll have to be the service centre now!
Click to expand...
Click to collapse
Use Kies intilisation or whatever to chose your device and serial.
If that wont work flash recovery and then use recovery to flash a stock based rom.
Related
I would like help from forum members.
After doing a root using the original firmware version, available here in the forum, my GS2 stopped working.
The device connects, the splash comes from Samsung (the one where the yellow triangle appears), but after that the screen goes black and nothing appears. Imagine turning on your PC but not booting in windows!
I can access the download mode and recovery mode. But nothing I do solves. I've tried putting other firmware versions but not resolved.
The Odin recognizes the device, the Kies not.
Another problem is that I do not know what was the original version of the firmware, but I know that the device was a French version, if that helps.
Flash a stock rom via Odin .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
I tried that. It did not work. I used the XWKK2, XXKI4, and XWKI4 XWKK5. None of them worked. I can flash them as I explained in the first post, but does not work.
Service centre is your next step .
jje
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Tabgyn said:
So I'm fu*&$#
I'm outside the country of purchase origin and do not have the invoice.
Click to expand...
Click to collapse
Did you try booting to recovery and clearing data / cache ?
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Tabgyn said:
Yes,I tried.
I would try to install a custom rom for CWM, but can not access the sdcard to copy the files.
Click to expand...
Click to collapse
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
I bought the usb jig must be delivered within 7 days.
But the jig is used to enter the download mode and reset the counter, right?
I can enter the download mode and recovery mode, I can even install any firmware version (official/CF). But none of that worked.
I believe it is with some corrupted file that is not connected to the firmware.
Or not!
gr4ndm4st3r_bl4ck said:
Well if you can't get it to work in any known way and you dont want to spend money to get it fixed , I'd say soft-brick it by enabling repartition in Odin and get a jig , then try again. You only lose 3-5$ that way. Don't get me wrong , it's the last thing you should try. What you probably should do is to take it to service.
Click to expand...
Click to collapse
Never tick repartition. You won't be able to bring it back that way. You can try soft bricking by unplugging the phone while flashing wih Odin but i still don't recommend it if you aren't able to boot even after flashing multiple roms. Service center would be your best bet
Sent from my GT-I9100
akusokuzan said:
Service center would be your best bet
Click to expand...
Click to collapse
What I said.
gr4ndm4st3r_bl4ck said:
What I said.
Click to expand...
Click to collapse
the message was directed to op rather than to you. I read and understood what you said, maybe my message just came out wrong.
Sent from my GT-I9100
Is your phone branded? Is it I9100G?
Well I don't know.
I get this: http://www.ebay.com/itm/190579058236?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Thats a UK phone .GT-I9100LKAXEU
Clean phone Boot to recovery .
Mounts and storage FORMAT data cache system and sd card . Remove battery .
Download mode via ODIN flash stock rom as per instructions .
jje
steps:
Wipe / Factory Reset
Wipe Cache
Mounts and FORMAT data cache storage system and SD card? How do I do this?
remove battery
download Mode
Flash stock rom
I'm sorry, I'm noob
Just giving some feedback if another user go through the same problem, did the flash with the firm XWKK5 and my gs2 returned to work.
Thank you all for your help.
I have the international edition of the S3 that a was messing around with, and I ended up installing some rom and now I can't even get into recovery. I've searched around and tried multiple methods of fixing it. The only thing I can access is download mode. Can anyone help?
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
speedman2202 said:
same my condition ..... it's looks like sudden death ..... try flash any recovery files ... if not ... ur last hope doing PIT then if u failed to 100% successfully .... need a new MotherBoard ... replace it if warranty recover
ps: act like fool and tell them u have sudden Death and u didnt play with anything (dont mention ur flash custom rom/firmware ....it will cancel ur warranty)
sry for lose man , u not the only one ... i cant even replace it with warranty due to bought from another country
good luck
Click to expand...
Click to collapse
Do you know where I could find instructions on how to flash a PIT?
this is file come from sammobile.com website
providing u the right PIT file with flasher
http://www.mediafire.com/?ddfpfkk2pb8326k
connect ur mobile , open odin program and then press on PIT button and navigate PIT files then (as i think) choose the latest PIT file with name i9300 (ur mobile Model) and latest date and then hit start ..... good luck but i recommend u send it to ur Samsung repair center if warranty cover
good luck
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
Exactly this^^^^....pit file flashing is an absolute last resort, not a first solution
did you tried flashing 4.0.4 stock rom with odin?
same thing happened to me 2 weeks ago, flashing 4.0.4 and after that flashing 4.1.2 fixed it.
try to do not mess with pit especially if you didn't backup your efs folder. it is not needed.
redstreetwalker said:
it is not needed.
Click to expand...
Click to collapse
moreover, it can render your phone irreparable
Ganjasaur said:
now I can't even get into recovery. The only thing I can access is download mode.
Click to expand...
Click to collapse
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Glebun said:
stop!
before messing with pit files, which is extremely dangerous, flash a stock ROM through Odin and then do a factory reset from recovery
Click to expand...
Click to collapse
I've already tried to flash a stock firmware, but I still couldn't get it into recovery. I'm not sure if it was the right one though. I have a regular unbranded SIII, is there a specific firmware I should flash?
speedman2202 said:
he cant go to Recovery mode ......(same like my condition) , he just can go to download mode
Click to expand...
Click to collapse
okay? the first thing to do here is just flash a stock ROM, no need for pit files
Mine was stuck before than samsung logo, on the model number screen. Almost 1 second or less after opening the device.
Then i flashed 4.0.4 and magically it opened without any loop or something. Its useless to flash 4.1.2 or any other jb stock rom, for some reason it seems not fixing the loop issue.
Again, there is no problem related with pit files.
Sent from my GT-I9300 using xda premium
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Ganjasaur said:
I flashed stock 4.0.4 firmware through odin. The operation was successful, but I was still unable to enter recovery. What am I doing wrong?
Click to expand...
Click to collapse
Follow the steps to root and flash your custom ROM again as if you just got your phone. The same thing happened to my T999, and it took me 3 tries doing this to finally get back into Recovery.
try to flash in odin stock rom then root use cwm then try to go to recovery..
My cousin's having the same exact issue and we've been unable to find the proper rom. Can anyone please tell me where to get one? I've downloaded some "international" ones but when i try to upload it it keeps telling me failed, i've tried at least 4 or 5 different roms.
ANY help would be greatly appreciated!!
Phone is:
GT-i9300
using it in the US with StraightTalk in the US (been working like a charm for ~6 months, all of a suddent when into this weird limp mode)
Phone was running jellybean 4.1.1 (through kies) and not rooted
Try several times before giving up. Sometimes it works after when the device feels that you've had enough stress and fear.
I mean the problem is common but it's solved in different ways or different repeats.
But it seems that your problem is a software problem that can be solved.
Glebun said:
It's all individual, what worked for you might not work for others. Don't say that flashing JB is useless, because it's not
Click to expand...
Click to collapse
Sorry for the misunderstanding, i mean flashing jb was useless for me in that situation. Thanks for the correction
Sent from my GT-I9300 using xda premium
I tried rooting my S3 using the guidelines from this forum.. (Option 2: Only root)
http://forum.xda-developers.com/showthread.php?t=1955423
Here is d procedure...
Download this CF Auto Root from here http://download.chainfire.eu/264/CF-...3g-gtn7100.zip
and extract it to .tar
Procedure :
1.Open Odin and select PDA tab
2.Point to extracted file CF-Auto-Root-SGN2.tar
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Reboot device and you will have superSU in application drawer.
Everything worked well..till the last step..
After rebooting,touch panel doesnt work..and Welcome screen shows language selection. First welcome screen used to come in portuguese then later after flashing for 4-5 times,it came in english.But the touch doesnt work.I tried factory restore..but it doesnt work..Phones memory is showing up when connected to computer..Somebody Help me bring my Phone back to life! Thank yu!
Looks like you flashed a file for a galaxy note 2 and not an s3.
You need to be careful and flash the right files to your phone or you could end up with a hard brick.
Have a look at the stickies on how to root.
Oh and make sure you have an international galaxy s3 9300 as that is this forum your in.
Sent from my GT-I9300 using xda premium
you flashed the wrong file (Note II), the process is correct but you need to flash the cf root/auto-root file for the S3 as mentioned! Try it again with it and see if it fixes your issue.
You Might wanna flash a stock firmware in odin first before you try rooting.
ficti0n851 said:
Looks like you flashed a file for a galaxy note 2 and not an s3.
You need to be careful and flash the right files to your phone or you could end up with a hard brick.
Have a look at the stickies on how to root.
Oh and make sure you have an international galaxy s3 9300 as that is this forum your in.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yea..mine is I9300 one.
can you give me the link for where I can download the right file for s3? and the procedure wud be helpful too..I mean,it looks like I already might have bricked my phone following wrong procedure..so..dont wanna make it worse :/
thank yu!
djseaneq said:
You Might wanna flash a stock firmware in odin first before you try rooting.
Click to expand...
Click to collapse
Thanks..but can yu give me the link to where i can get Stock firmware for s3 I9300..I am sorry but I am a noob in this!
asdasd
chrismast said:
you flashed the wrong file (Note II), the process is correct but you need to flash the cf root/auto-root file for the S3 as mentioned! Try it again with it and see if it fixes your issue.
Click to expand...
Click to collapse
Can yu provide the link for that file for s3 I9300. and can the same process be followed again? will it work under my current phone condition?
Ashkaiprime said:
Can yu provide the link for that file for s3 I9300. and can the same process be followed again? will it work under my current phone condition?
Click to expand...
Click to collapse
This thread http://forum.xda-developers.com/showthread.php?t=1957273
Instructions in post 2 and zip file in post 3
ROM is here http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=BTU
Click on the drop down menus to get the correct one for your phone
ag4751 said:
This thread http://forum.xda-developers.com/showthread.php?t=1957273
Instructions in post 2 and zip file in post 3
ROM is here http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=BTU
Click on the drop down menus to get the correct one for your phone
Click to expand...
Click to collapse
Tried CFA autoroot..It flashed well but after rebooting touch panel doesnt work..I cant click on language selection or next or any button..Its jst the same as first
Flash stock rom then factory reset .
Then read the basic faqs and guides before flashing anything or ignore and head straight down the highway to Bricksville .
jje
ficti0n851 said:
Looks like you flashed a file for a galaxy note 2 and not an s3.
You need to be careful and flash the right files to your phone or you could end up with a hard brick.
Have a look at the stickies on how to root.
Oh and make sure you have an international galaxy s3 9300 as that is this forum your in.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
So there is nothing I can do to make my phone's touch panel work??
One more thing is..when I open the phone in recovery mode(vol up+menu+power buttons) the android logo in the background is showing some X mark smething..So i guess its soft bricked rather than hard-bricked..so is there no way it can work?
Ashkaiprime said:
So there is nothing I can do to make my phone's touch panel work??
One more thing is..when I open the phone in recovery mode(vol up+menu+power buttons) the android logo in the background is showing some X mark smething..So i guess its soft bricked rather than hard-bricked..so is there no way it can work?
Click to expand...
Click to collapse
One take to a service centre is best as you have a big problem and zero knowledge .
OR
You could try flashing CF Root recovery from development then booting to recovery format cache system data sd card and preload .
Then download mode and flash stock rom via Odin .
jje
JJEgan said:
One take to a service centre is best as you have a big problem and zero knowledge .
OR
You could try flashing CF Root recovery from development then booting to recovery format cache system data sd card and preload .
Then download mode and flash stock rom via Odin .
jje
Click to expand...
Click to collapse
Service centre ppl telling that motherboard is lost! but i dont think so..cuz phn is booting well in recovery and download mode..its even being detected by computer..its internal memory can be seen too!
Ashkaiprime said:
Service centre ppl telling that motherboard is lost! but i dont think so..cuz phn is booting well in recovery and download mode..its even being detected by computer..its internal memory can be seen too!
Click to expand...
Click to collapse
If you phone connects to your PC then try completely resetting the phone using Kies
Start Kies, then go to Tools then Firmware Upgrade and Installation, this process will wipe the phone and reinstall the latest firmware, you will need some details from under the phone battery but just follow the on screen instructions.
ag4751 said:
If you phone connects to your PC then try completely resetting the phone using Kies
Start Kies, then go to Tools then Firmware Upgrade and Installation, this process will wipe the phone and reinstall the latest firmware, you will need some details from under the phone battery but just follow the on screen instructions.
Click to expand...
Click to collapse
Its showing "device firmware cant support initializing"
Here's the pic..
Ashkaiprime said:
Its showing "device firmware cant support initializing"
Here's the pic..
Click to expand...
Click to collapse
You need to ask yourself a simple question .
Is motherboard damaged yes = replace no = flash stock rom via Odin fails = service centre new motherboard .
jje
JJEgan said:
You need to ask yourself a simple question .
Is motherboard damaged yes = replace no = flash stock rom via Odin fails = service centre new motherboard .
jje
Click to expand...
Click to collapse
Flashing stock rom doesn't fail..it jst doesnt improve its condition..Touch doesnt work! Flashing(its showing 'Pass' in Odin) and getting detected by computer works well..
As of changing motherbaord..thats wat I am planning to do after i go to my hometown..till then I want to try and make it work..since the symptoms doesn't imply motherboard damage!
Ashkaiprime said:
Flashing stock rom doesn't fail..it jst doesnt improve its condition..Touch doesnt work! Flashing(its showing 'Pass' in Odin) and getting detected by computer works well..
As of changing motherbaord..thats wat I am planning to do after i go to my hometown..till then I want to try and make it work..since the symptoms doesn't imply motherboard damage!
Click to expand...
Click to collapse
Motherboard has multiple components and feeds the digitizer for the screen .
jje
JJEgan said:
Motherboard has multiple components and feeds the digitizer for the screen .
jje
Click to expand...
Click to collapse
Oh..got it now..
Jst out of curiosity..how does rooting some software destroy hardware?
ANd Cnat I jst change that destroyed part instead of Whole Motherboard>?
No.
You can destroy cpu, gpu by overclocking badly, overvolting, eventually internal card can be corrupted but all those scenario aren't linked to a simple rooting procedure (which is only writing two files on the system partition...).
You need to have a good diagnosis, either the digitizer is dead, or the connection of it on the motherboard. Our the motherboard.
Replacement won't be cheap especially for motherboard.
Hi!
I wake up today and find my phone freeze in the start logo! I tried to restart it but it was the same.
http : // im67 . gulfup . com / IiIc2R . jpg
After I tried everything I decide to format the phone with "wipe date/factory reset" but there was a problem!
And this is what I got>>
http : // im67 . gulfup . com / GSmiOr . jpg
I tried to do something using Kies porgram. But it said it is not supported.
Any thought?
Firstly, check the FAQ thread. You'll find information on flashig a custom recovery, after which you can flash a custom ROM. Kies won't help you as it'll only update your phone, which it can't, since there aren't any updates, and apparently it won't even recognize your phone.
Try flashing a custom recovery/root with Odin, then flash a custom ROM via recovery mode. All of this can be found in the FAQ which I have linked to. You may not want a rooted phone, but it's a lot easier to work with.
And if you really mind having a rooted phone, for warranty issues or otherwise, you could also unroot, flash a stock ROM, and reset your flash counter, so it'll all be as it was when you bought your phone. Again, all this is in the FAQ thread.
johnnyspritz said:
Firstly, check the FAQ thread. You'll find information on flashig a custom recovery, after which you can flash a custom ROM. Kies won't help you as it'll only update your phone, which it can't, since there aren't any updates, and apparently it won't even recognize your phone.
Try flashing a custom recovery/root with Odin, then flash a custom ROM via recovery mode. All of this can be found in the FAQ which I have linked to. You may not want a rooted phone, but it's a lot easier to work with.
And if you really mind having a rooted phone, for warranty issues or otherwise, you could also unroot, flash a stock ROM, and reset your flash counter, so it'll all be as it was when you bought your phone. Again, all this is in the FAQ thread.
Click to expand...
Click to collapse
First of all, thanks for replay.
Even so I don't have so much knowledge with most of that stuff I tried to flash my phone according to the link you give me.
I download 5 or 6 firmwares and try to flash it with Odin but all I got was failed failed failed.
If there are specific steps I can go through, it will be great help
ِAny one?!
someonees said:
ِAny one?!
Click to expand...
Click to collapse
Try to flash PIT file
verny94 said:
Try to flash PIT file
Click to expand...
Click to collapse
What do you mean? Are there link here explain the steps?
someonees said:
What do you mean? Are there link here explain the steps?
Click to expand...
Click to collapse
Of course. http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
verny94 said:
Of course. http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Click to expand...
Click to collapse
Unfortunately, it didn't work.
It didn't wont to flash pit from the start!
http://im49.gulfup.com/ganDcL.png
i'll explain what i did to get here.
I was in stock rom 4.1.2, and i decide to flash a custom rom, after several tests i decided to get back to stock rom and i used the mobile odin, when i flash the rom using mobile odin, nothing happens, and rebooted the manually the phone and when i did this, the phone got locked/bricked in Samsung GT-I9300 screen.
So i tried any ways to turn on the phone and i got sucess, but when i unbrick my phone, he start to freeze all the time and reboot all the time for it self, everytime that it freeze i had to wipe cache partition to turn on and use, if a did not do this, the phone stuck just after sansung screen.
I'm lost, i tried everything and the phone keeps freezing, rebooting all the time.
Please, someone help me!
Thanks.
GiovaneM said:
i'll explain what i did to get here.
I was in stock rom 4.1.2, and i decide to flash a custom rom, after several tests i decided to get back to stock rom and i used the mobile odin, when i flash the rom using mobile odin, nothing happens, and rebooted the manually the phone and when i did this, the phone got locked/bricked in Samsung GT-I9300 screen.
So i tried any ways to turn on the phone and i got sucess, but when i unbrick my phone, he start to freeze all the time and reboot all the time for it self, everytime that it freeze i had to wipe cache partition to turn on and use, if a did not do this, the phone stuck just after sansung screen.
I'm lost, i tried everything and the phone keeps freezing, rebooting all the time.
Please, someone help me!
Thanks.
Click to expand...
Click to collapse
Use pc odin to flash stock, then reboot into recovery and factory reset then wipe cache.
tallman43 said:
Use pc odin to flash stock, then reboot into recovery and factory reset then wipe cache.
Click to expand...
Click to collapse
i done this a thousand times.
GiovaneM said:
i done this a thousand times.
Click to expand...
Click to collapse
Well why didn't you put that in your thread i'm not a mind reader
Seriously though have a look at doing a mega wipe first look here >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << then flash a custom stock rom.Place it on your ext sd card first because the mega wipe will wipe everything including your system.
Read exactly what to do first so you fully understand.
tallman43 said:
Well why didn't you put that in your thread i'm not a mind reader
Seriously though have a look at doing a mega wipe first look here >> http://forum.xda-developers.com/galaxy-s3/general/tool-mega-wipesuper-wipefactory-t1832326 << then flash a custom stock rom.Place it on your ext sd card first because the mega wipe will wipe everything including your system.
Read exactly what to do first so you fully understand.
Click to expand...
Click to collapse
I forgot, my bad.
I alredy done this, i tried to do a mega wipe using that script, and flash using odin stock rom, but didn't work :crying:
GiovaneM said:
I forgot, my bad.
I alredy done this, i tried to do a mega wipe using that script, and flash using odin stock rom, but didn't work :crying:
Click to expand...
Click to collapse
I don't think I will post any more information because if I do you will probably say I've tried that. I think more information is needed on what you have tried so people looking can suggest things you have not tried.
tallman43 said:
I don't think I will post any more information because if I do you will probably say I've tried that. I think more information is needed on what you have tried so people looking can suggest things you have not tried.
Click to expand...
Click to collapse
If i say that i tried, its couse' i tried and didn't work, what a did was wipe my device and flash stock rom using odin. I'm here couse' nothing has worked well, both things you said to me i did and didn't work.
Try to say something advanced, something that only do in hard bricked.
GiovaneM said:
If i say that i tried, its couse' i tried and didn't work, what a did was wipe my device and flash stock rom using odin. I'm here couse' nothing has worked well, both things you said to me i did and didn't work.
Try to say something advanced, something that only do in hard bricked.
Click to expand...
Click to collapse
Lol for some people that is advanced
If you have done a mega wipe and installed stock rom correctly there are not many options left
(1) You could try another stock rom (Just in case their is something wrong with the one you are trying to flash)
(2) Try the rescue firmware (But only use as a last resort because it containes a pit file)
(3) Service center
tallman43 said:
Lol for some people that is advanced
If you have done a mega wipe and installed stock rom correctly there are not many options left
(1) You could try another stock rom (Just in case their is something wrong with the one you are trying to flash)
(2) Try the rescue firmware (But only use as a last resort because it containes a pit file)
(3) Service center
Click to expand...
Click to collapse
Will try to rescue my rom using your signature link, i hope it works. Thanks for your help.
GiovaneM said:
Will try to rescue my rom using your signature link, i hope it works. Thanks for your help.
Click to expand...
Click to collapse
tallman43 said:
Lol for some people that is advanced
If you have done a mega wipe and installed stock rom correctly there are not many options left
(1) You could try another stock rom (Just in case their is something wrong with the one you are trying to flash)
(2) Try the rescue firmware (But only use as a last resort because it containes a pit file)
(3) Service center
Click to expand...
Click to collapse
My friend, thank you so much, your tutorial about rescue firmware works like a glove, thank you so!!!
GiovaneM said:
My friend, thank you so much, your tutorial about rescue firmware works like a glove, thank you so!!!
Click to expand...
Click to collapse
:good: