Just tried the CM10 FXP220 and when I tried to restore the stock backup the phone hesitates to boot.
Here's what I did:
1. Made a CWM backup of stock
2. Reboot
3. Flashed the FXP Kernel through fastboot
4. Reboot
5. Wipe data/factory reset
6. Wipe Cache partition
7. Install Zip
(a) FXP220
(b) gapps
8. Wipe data/factory reset
9. Wipe Cache partition
10. Reboot
11. Tested CM for 10mins
12. Reboot
13. Again on CM
14. Reboot
15. Entered CWM
16. Restored the backup of stock
17. Wipe Cache partition
18. Wipe dalvik cache
19. Reboot
20. System booted successfully
21. on Stock
22. Reboot
23. System halts on Sony logo
What could be the possible reason? any fix?
Try installing stock ftf via flashtool, install CWM and then try restoring...
No idea why that happens, but the second boot of my ported XU got stuck like that.. Bt it booted in a few minutes
Press thanks if I helped:thumbup:
Related
I install the ROM T0X1C V8 rom for locked bootloader?
steps I did to install and fault
full wipe> install. zip> install patch mt11i> restart
stays in the logo of sony when installed
sorry for the English
Emiliano from Argentina NEO V
Hi,
You can try:
1. ROM in you SD card.
2. Go to CMW
3. Wipe data / factory reset + wipe cache
4. mount & storage -> format system/
5. advance -> wipe davik cache
6. Install ROM
7. Install Patch
DO NOT INSTALL ODEX.zip, it broken. If you install, you will have a bootlop.
8. advance -> wipe battery stats
9. Reboot and enjoy
gracias
gracias !!!
Hey guys! i have a problem every single time i try to install this rom.
1. I flash via flashtool the 6.1.1.B.1.54 ftf
2. I root my phone and install a CWM (LockedBootloader)
3. I copy the TheBrainsRom_v08 in internal storage (after copying META.inf and boot.img from TheBrainsRom_ICS03_lockedBL)
4. I boot into recovery
5. Install zip from sdcard -> choose zip from sdcard -> TheBrainsRom_ICS08_slim.zip -> Yes Install.
6. After installation i select Wipe cache partition -> Yes wipe cache.
7. I select advanced and i do wipe dalvik cache.
8. After doing that i select go back and at the main menu of the recovery i selectg reboot system now. I see a message saying ROM may flash stock revovery on. THIS CAN NOT BE UNDONE.
What i am i suppose to do now? When i click yes i just see the Sony logo for more than 1 hour. What i am i doing wrong?
Thank you and sorry my bad english.
Hi, im using v8 with 6.1.1.B.10 baseband. As far as i know v9 is for .54
You dobt need to use the locked method of v3
Simply flash stock 6.1.1.B.10
Root and install cwm
Enter cwm
Flash v8
Wipe cache and dalvik (also data if you wish, still not mandatory)
Reboot twice
Done
Sent from my ST25i using xda app-developers app
DaRk-L0rD said:
Hey guys! i have a problem every single time i try to install this rom.
1. I flash via flashtool the 6.1.1.B.1.54 ftf
2. I root my phone and install a CWM (LockedBootloader)
3. I copy the TheBrainsRom_v08 in internal storage (after copying META.inf and boot.img from TheBrainsRom_ICS03_lockedBL)
4. I boot into recovery
5. Install zip from sdcard -> choose zip from sdcard -> TheBrainsRom_ICS08_slim.zip -> Yes Install.
6. After installation i select Wipe cache partition -> Yes wipe cache.
7. I select advanced and i do wipe dalvik cache.
8. After doing that i select go back and at the main menu of the recovery i selectg reboot system now. I see a message saying ROM may flash stock revovery on. THIS CAN NOT BE UNDONE.
What i am i suppose to do now? When i click yes i just see the Sony logo for more than 1 hour. What i am i doing wrong?
Thank you and sorry my bad english.
Click to expand...
Click to collapse
-v8 is for B.1.10 firmware, not for B.1.54
-Don't do point "3" of your list, not needed anymore
i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
NeguitO said:
i tried to install cwm in my s2 following this link: http://www.ibtimes.co.uk/install-an...ible-cwm-recovery-galaxy-s2-i9100-how-1434170
i stayed in the 11 step "PASS", after that, appears the samsung text and screen turns off.
Cwm works, i wipe cache but nothing happend.
Please help
Click to expand...
Click to collapse
Try this first.
If your device is stuck at boot animation or facing boot loop issues then try the following steps:
Disconnect your phone from computer, close Odin and remove phone's battery. Reinsert it back within 3 to 4 seconds, re-launch Odin and then repeat the tutorial from step 4.
Click to expand...
Click to collapse
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
warrior1208 said:
Try this first.
Otherwise, just go into your recovery and flash a custom KitKat or a Lollipop ROM. This method would remove all the data present on the phone, so I am assuming that you took a backup before handling odin. To flash a ROM, do this:
1. Download ROM and GApps and put them in your storage(MOUNT SDCARD FROM THE RECOVERY ITSELF)
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Advanced>Wipe Dalvik Cache
5. Flash ROM AND GApps
6. Reboot system.
Then you're good to go.
Regards.
Click to expand...
Click to collapse
Thanks you! my S II is ok now.
steps used:
1. boot into recovery
2. flash recent/latest (in my case it's 14-Nov) official pollux_windy nightly + GApps
3. boot into ROM.
4. perform initial setup
5. reboot into recovery
6. backup boot, data and system
7. boot into ROM again
8. reboot into recovery
9. wipe boot, cache, data and system
10. restore
11. trying to boot into ROM again
I am stuck at the boot animation logo.
could it be a problem with the TWRP version I'm using?
Thanks!
edit1: just tried twrp 8.4.1.0 and same results.
edit2: I wanna try cyanogen recovery but I just found out it doesn't include backup/restore feature! :/
I'm using TWRP 2.7.8 and these are the steps I followed:
- Wipe system, cache, data and dalvik
- Flash repartition script
- Flash LineageOS zip
- Reboot
After rebooting, it goes to MultiROM selection, and says it is booting Internal(I have removed all other roms) but then it reboots into TWRP again.
I'm unable to install it as an alternate rom in Multirom as well. It throws the error: 'E:Error executing updater binary in zip '/tmp/mr_update.zip'
Yes please someone ! This system partition thing isn't properly working. Stuck at mi logo.
Prequsites:
Download following files:
Repartition Script zip: https://mega.nz/#!645wGZIC!maidxLV7kRMcQTaUM-V6QvOJplL3nfrDWWXiZYhLyJ0
TWRP Multirom 2.8.4: https://mega.nz/#!644RyARI!6pXZVk16xS3vxFL52UxKwEEmcX_iQ8YEaAd37JHm5w4
TWRP 3.0.2.0: https://dl.twrp.me/mocha/
Place all the files on the device.
Step 1: In your current TWRP: Wipe -> Advanced Wipe: Tick Dalvik/art, System, Cache and Data -> Swipe to wipe
Step 2: Reboot into Recovery
Step 3: Install TWRP Multirom 2.8.4 and reboot to Recovery
Step 4: Once rebooted go to Install and select the Repartition Script zip the device will reboot into Recovery
Step 5: Back in Recovery go to Wipe -> Advanced Wipe Tick System an click Repair or Change File System. The size is now 0MB -> press "Resize File System" and it should be Size: 1235MB
Step 6: Go to Install and select the "Image" Button in the lower right corner and select TWRP 3.0.2.0 mocha, select Recovery and Swipe to flash. Reboot Device into Recovery. It asks you there is no OS installed confirm that with Swipe after that it asks if you want to install SuperSU.... click on DONT INSTALL
Step 7: You should be now in TWRP 3.0.2.0 now go to install flash Lineage OS, Gapps and SuperSU it should work.
Multirom
Does anyone succeed on dual boot with Miui Smoke, i wanna make Lineage OS as secondary ROM since camera not working yet..
Legacyleader said:
Step 1: In your current TWRP: Wipe -> Advanced Wipe: Tick Dalvik/art, System, Cache and Data -> Swipe to wipe
Step 2: Reboot into Recovery
Step 3: Install TWRP Multirom 2.8.4 and reboot to Recovery
Step 4: Once rebooted go to Install and select the Repartition Script zip the device will reboot into Recovery
Step 5: Back in Recovery go to Wipe -> Advanced Wipe Tick System an click Repair or Change File System. The size is now 0MB -> press "Resize File System" and it should be Size: 1235MB
Step 6: Go to Install and select the "Image" Button in the lower right corner and select TWRP 3.0.2.0 mocha, select Recovery and Swipe to flash. Reboot Device into Recovery. It asks you there is no OS installed confirm that with Swipe after that it asks if you want to install SuperSU.... click on DONT INSTALL
Step 7: You should be now in TWRP 3.0.2.0 now go to install flash Lineage OS, Gapps and SuperSU it should work.
Click to expand...
Click to collapse
Thank you so much! This worked like a charm. Now I've got it up and running, but I've got a problem. Google Play Books doesn't display any text in any book I open. It just shows blank pages. I've vaguely understood that this is some problem with the webview, but how do I fix it?
Encountered very weird issue when trying to install roms
Hi guys, I'm currently on 'Resurrection Remix M - v5.7.4' after trying to install 'LineageOS 13' which hung during installation on "Patching system image unconditionally" . I've also manged to install 'AOSiP KANG 5.5 - 7.1.1'; once. After managing to install it, I tried to install 'Lineage OS 13' again, but it still fails at the same spot. Now every time I try to install 'AOSiP KANG 5.5 - 7.1.1' in hangs on "flashing AOSiP" . So, I then tried 'Resurrection Remix M - v5.7.4', it worked and now I think I'm stuck on Remix. I'd like to install "LineageOS 13" as the new FoxyKernel only works on 'Lineage OS 13'. I've already merged the partitions and have been able to return to stock rom through the use of the miflash tool and fastboot. I've already tried flashing 'LineageOS 13 and 14' using 'twrp2.8.4 and 3.0.2' but both have failed I've also tried using 'CWM 6.0.5' but that failed as well. I've always wiped everything except the sdcard and usb when trying to install a new rom. Can someone please help me install 'Lineage OS 13' ?
#Note, after I failed each install I always returned back to stock and redid everything again.
~Update 6/3/17
I've just tried to install 'lineage OS 13.0 ' again and it failed yet again, now it seems that I can't reinstall 'Resurrection Remix M - v5.7.4' it hangs yet again on patching system unconditionally, which it did not the first time round. Furthermore, the back up I made previously of Resurrection Remix M - v5.7.4, fails to install and fails on "extractTarFork() process ended with ERROR: 255". Can some one please me.
~Update 7/3/17
Managed to install the new 'lineage OS 14.0'; screwed up the install, by installing 'foxykernel' before booting. Caused system to be stuck on lineage boot animation.... should have read the thread before attempting to install and as usual rom refuses to install again. Stuck at "Patching system image unconditionally". Managed to install 'AospExtended ROM V3.1' but system hung on 'verifying network configuration' and "Just a Sec..." screen; WiFi for other devices were ok no issues. Left it on for over 10 hours no change. Wiped dalvik/art cache and cache tried again but no such luck. Wiped data, but also no luck.
#Note, by this time I've given up on returning to stock, as it did absolutely nothing .
~Update 8/3/17
Managed to flash the new 'lineageOS13.0', wiped dalvik and cache, installed Gapps but system stuck on Mi logo on boot. Managed to install 'RR-N-v5.8.2-20170306' boots up fine... tried to install 'Foxy kernel 1.5.rc2'... wiped cache. Now stuck in boot loop... :Facepalm: should have read the instructions first... forgot to back up boot. :Facepalm:. Will have to wait for MM version of the rom or newer version. Tried 'AOSiP-5.5-KANG-mocha-20170306' for some reason it got stuck on boot loop, only shows mi logo.
~Update 19/3/17
Managed to flash the new 'lineageOS14.0[2017-03-12]' , installed 'Opengapps pico 20170314' found out that in order to be stable need to factory reset, then install Gapps, so that when first boot, account set up shows. Installed 'Foxy kernel 2.0.8', now antutu score "80000" ... found out that the backup for boot works. Installed TWRP 3.1.0 , but still cannot install a ROM more than once. All in all 'lineageOS14.0[2017-03-12]' very smooth now that Gapps stopped crashing.